gluing machine used for sale

Auction-ID: A7-47030-171

Pile feeder F535 – Vacustar separating head 4 buckles 1 knife Batch counter A56 delivery

Thank you for your interest in our used machines, which we can offer you as follows: Probat L12 roaster in top condition - little used Manufacturer: Probat Model: L 12 batch roaster Year of construction: 1995 Heating medium: Gas Capacity: approx. 5 - 12 kg/batch Dimensions: 1700x1000x2000 mm Weight: approx. 580kg Details: - Batch size up to approx. 12 kg green coffee - The roaster is installed and can be viewed in operation - Last used to roast buckwheat or pumpkin seeds - Operating instructions available in German We offer this machine for sale "as is" to the exclusion of any warranty/claims for defects or representations. from the location Germany; unpacked, without disassembly

1 of used high-speed film-only shrinkpacker - multi-packer, make KHS, type Innopack SP A-H, new 2013, operating direction right. Used to pack standard and sleek beverage cans as 2x2=4 3-lane, as well as 3x2=6, 4x2=8, 5x2=10 and 4x3=12 dual-lane. Siemens S7 controls, automatic film-splicing. Capacity upto 125 cycles/minute depending on product/configuration.

- Sony UP-D897 Printer Auction-ID: A7-47030-119

Auction-ID: A7-47030-122

Auction-ID: A7-47030-123

SPECIFICATIONS: Machine operation with rotating bezel diameter mm: 400 Speed m/min: 40 Installed capacity Kw: 3,7 Width adjustment with pushers Accessories: - 2 roller conveyors for the input and output area - Coil holder -Claw - Stretch film cutting machine

tube diameter: 50,8 mm wall strength: 1,0 mm square edge steel: 50 x 50 x 1 mm round bar steel: 25 x 6 mm weight of the machine ca.: 46 Kg dimensions: 0,6 x 0,4 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Injection Unit Screw Diameter: Ø 55 Injection Volume: approx. 517 cm³ Injection Pressure: up to 2,000 bar Injection Rate: approx. 220 cm³/s Plasticizing Capacity: approx. 35 g/s (PS) Screw L/D Ratio: 22:1 Nozzle Contact Force: 60 kN Clamping Unit Clamping Force: 2,300 kN (230 t) Clamping System: Zhafir Zeres all-electric toggle system Platen Size (H × V): approx. 850 × 800 mm Mould Opening Stroke: 470 mm Max. Daylight Opening: approx. 940 mm Min. Mould Height: 220 mm Ejector Stroke: 150 mm Ejector Force (fwd / back): 50 / 30 kN Drive & Control Drive Type: All-electric servo drive Installed Power: 47 kW Full Load Current: 79 A Short Circuit Current: 25 kA Power Supply: 400 V / 50 Hz / 3-phase Control System: Zhafir SIGMATEK HMI touchscreen control Equipment / Features Drive Concept: Fully electric servo system for high p ...

ZAKMET HYPERZAKMET 6000X2500 plasma cutting machine was built in 2008 in Poland. The machine is used to cut pre-programmed shapes in details having a maximum thickness of 38 mm (carbon steel) or 20 mm (aluminium and stainless steel). A powerful HYPERTHERM HyPerformance HPR 130 laser source with a power of 130 A is used for the cutting process, allowing extremely precise and accurate machining to be achieved. The plasma cutting machine has a solidly built work table with a length of 6000 mm and a width of 2500 mm, which can be extended by means of an additional control panel. The plasma cutting machine is also equipped with FASTCAM CAD/CAM software for simple and effective programming of the cut shapes, and a modern HYPERTHERM EDGE CNC controller, which allows for full control of the machine. Characteristics of the ZAKMET HYPERZAKMET 6000X2500 plasma cutting machine - working area  ...

Used spiral kneader DIOSNA, type: SP 160 D -In bakery condition- - up to 160 kg dough / approx. 100 kg flour - Condition: Good, ready for immediate use The kneader is in good used condition and is immediately ready for use. Visits and test runs are possible by arrangement.

Used dough divider KEMPER, Type: Imperator CT -In bakery condition- The machine is still being refurbished. Visits and test runs are possible by arrangement.

This 3-axis DMG NEF 600 was manufactured in 2012. It features a turning length of 1200 mm and a powerful integrated spindle motor with a maximum spindle speed of 3500 rpm. The machine includes a 12-station disc turret and live tooling capabilities for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the DMG NEF 600 horizontal turning machine we have for sale. Contact us for further details.

Bottle washer, make Klinger, type: Superserpende 16/0,5 Liter, for 10.400 bph nominal capacity, 16 bottles/row, with 85 mm bottle cells, runs on 0,5 lt and 0,33 lt bottles, with Siemens S5 control, can still be seen in operation.

Bottle washer, MAG, 10 bottles / row, with 80 mm plastic cells, built in 1991

This 6-axis DMG Mori Seiki NZ2000T3Y2 was manufactured in 2008. It features a maximum machining diameter of 200 mm and a maximum machining length of 260 mm. The bar machining capacity is 65 mm, with an X-axis travel of 210 mm, Z-axis travel of 810 mm, and Y-axis travel of 110 mm. If you are looking to get high-quality turning capabilities, consider the DMG Mori Seiki NZ2000T3Y2 machine we have for sale. Contact us for further details.

This 3-axis DOOSAN Puma GT 2100M was manufactured in 2017. It features a maximum turning diameter of 300 mm and a turning length of 513 mm. The machine is equipped with 12 tool stations and offers rapid traverse speeds of 24 m/min in the X-axis and 30 m/min in the Z-axis. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 2100M horizontal turning machine we have for sale. Contact us for further details.

CNC punching machine manufactured in 2013. This EHRT Holecut 40-9 features an automatic infeeding system for materials up to 4.2 m long and gripper jaws accommodating material thickness from 3 to 15 mm. It supports up to 9 tools in storage and has a punching rate of 70 SPM. If you are looking to get high-quality punching capabilities, consider the EHRT Holecut 40-9 machine we have for sale. Contact us for further details.

Deburring machine manufactured in 2007. This Fladder AUT-1000 VAC features a voltage of 3 x 400V and operates at a frequency of 50 Hz with a current of 50 A. If you are looking to get high-quality deburring capabilities, consider the Fladder AUT-1000 VAC machine we have for sale. Contact us for further details.

Bottle washer, make O+H, type: Contitact, for 12,300 fl/h, with 80 mm bottle cells, built 1987

Labeler, make Krones, type: Vinetta 6-3-3/180, control range: 1.700 - 4.800 bph, for 0,7/0,75 lt and 1,0 lt bottles, with 2 stations for body-, shoulder- and back label, direction: right->left, built 1985

CNC shearing machine manufactured in 2010. This LVD MVS-TS 13/31 features a maximum cutting length of 3100 mm and a cutting thickness of 13 mm. It is equipped with a backgauge range of 1000 mm and a powerful motor with 21.5 kW. If you are looking to get high-quality shearing capabilities, consider the LVD MVS-TS 13/31 machine we have for sale. Contact us for further details.

Workpiece dimensions: 4000x2000x20mm, laser power: 4kW, connected load: 88kVA, nitrogen/ oxygen connection: 30/ 20bar, control system: Siemens 840D, length: 7000mm, width: 3600mm, height: 2300mm, weight: 12.5t. An on-site inspection is possible.

Offered is a 3D coordinate measuring machine. Working area X/Y/Z: 850mm/1200mm/600mm, probe holder: Renishaw PH10M, table surface: granite plate, resolution: 0.1µm, air supply: 5bar, control: Zeiss CMM Controller. Equipped with control panel with joystick, SCR200 probe change magazine, calibration sphere, extensive probe accessories. Weight: approx. 2400kg, overall dimensions X/Y/Z: approx. 2100mm/1900mm/2350mm. Inspection possible by arrangement.

Size: 520 mm Equipments: Flat stack investors Station 1: 4 Bags Station 2: 4 Bags

Labeler, make Krones, type: Robusta 10-4-4, for ~20.000 bph, with 10 bottle dishes, 4 grippers and 4 glue pallets, adjust to 0,2 lt, 0,33 lt., 0,5 lt. and 0,7 lt. bottles, for body, shoulder and back label, with around safety casing, with Siemens S5 control, built 1997

Labeler, make Krones, type: Universella 18-8-6. with 2 glue pumps, conveyors, sets for 0,25 lt + 0,33 lt Gastro crown cap, 0,33 lt Longneck screw cap, 0,5 lt NRW brown crown cap, 0,5 lt NRW white screw cap, 0,7 lt GDB screw cap, 0,75 lt Gastro screw cap, built 1998.

Labeler, make Krones, type: Bonamatic 1.240-20-4-4, with 20 bottle dishes, 4 grippers and 4 glue pallets, adjust to 0,7 lt. bottles, with 3 aggregates, for body, shoulder and back label, as too for neck ring and foot label, with cam-bottom adjustment, with around safety casing, with Siemens S5 control, built 1990

Labeler, make Krones, type: Prontomatic 720-21-8-8-110 RM, for 0,7 lt GdB bottle, for 24.000 bph, for body-, shoulder- and back label, right -> left counter clockwise, with 2 heated glue pumps, built 1997

Labeler, make KHS, type: Innoket KL 2080/120-48, speed up to 50.000 bph, right-machine, for cold glue labelling, adjust to 0,33 lt. and 0,5 lt. Longneck-bottles as too 0,5 lt. NRW-bottles, with 2 aggregates for body-, shoulder- and back label, as too neck ring, with 48 bottle dishes, 5 gripper cylinder, 6 glue pallets, with steel glue roller, carousel-Ø: 2.080mm, pitch: 120 mm, with Siemens S7 control, built 2003

Year of manufacture: 2022 | Including accessories | Subject to prior sale. Errors and changes in technical data reserved.

Labeler, make Krones, type: Variomatic, for 12.000 bph, adjust to 0,5 lt. and 0,75 lt. bottles, with 3 aggregates, for Body- shoulder and back label, as too with additional label dispenser for self-adhesive labels, with around safety casing, built-on control cabinet, year of origin: 1998

Labeller, make Krones, type: Universella 600-15-8-6-130, 2 aggregates for cold glue label at body, shoulder, back; Videojet dating built 1995

Siemens X-ray system type Multix / Vertix Swing with generator POLYDOROS IT/S in good condition

Projection: 610 mm Installation height: 340 mm Working height: 1015 mm Table size: 600 x 500 mm Table size additional table: 220 x 500 mm Band saw blade length: 3970 mm Cutting speed, infinitely variable: 20 - 85 / 120 - 500 m/min Band saw width: 3 - 16 mm Table tiltable, 4 directions: 15° Main engine power: 1.5 kW Connected load band welder: 2.4 kVA Weight, approx.: 700 kg Equipment: - Stepless cutting speed - Belt welding device - Band saw blade in adjustable precision guides - All-round tiltable tiltable (not applicable to machines with table feed due to design) - Belt scissors - Sanding unit - Chip brush - Eye bolt for moving the machine - Machine light . LED speed indicator - Blow-out device -CE

Eyelet machine Hang 87 F, machine number 38960, 3 eyelet heads, eyelet diameter 5.5 mm, inner diameter 5 mm, waste suction device, in good condition, immediately available

M. No.: 85039 // Model: 371 Equipment / Additional information: Ø max. 15 mm Distance between drills: 60-120 mm

bore capacity in steel (diameter): 25 mm throat: 175 mm bore stroke: 50 mm : 16 mm spindle taper: ISO 30 spindle turning speed range: 50 - 3000 U/min : 380 mm : 175 mm table surface area: 700 x 180 mm connected load frequency: 230 V max. distance between table and spindle-nose: max. 320 mm total power requirement: 0,75 kW weight of the machine ca.: 150 Kg dimensions of the machine ca.: 670 x 550 x 910 m Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° spindle protection. incl. tool box with various tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - Cutting length 250 mm - Cutting angle 90 ° - Cutting thickness - Normal steel up to 4 mm - Stainless steel up to 3 mm - Aluminium up to 5 mm - Stroke rate up to approx. 55 rpm - Table size W 800 x D 800 mm - Working height approx. 940 mm - Stops infinitely adjustable in length and number of degrees - Drive 400 V / 4 kW - Oil filling 50 l - E - Foot switch - Space requirement approx. W 800 x H 1250 x D 900 mm - Weight approx. 700 kg

Folding unit GUK FA 50-2 2nd station; good condition; cleaned and tested; Inlet width 500mm; 2 folded pockets; Self-control. Folding unit GUK FA 50-2 secound unit; good condition; cleaned and checked; working witdh 500mm; two pockets; Automatic control.

bore capacity in steel (diameter): 30 mm throat: 200 mm bore stroke: 70 mm : 16 mm spindle taper: MK3 spindle turning speed range: 50 - 3000 U/min : 565 mm : 220 mm table surface area: 840 x 210 mm connected load frequency: 400 V max. distance between table and spindle-nose: max. 470 mm total power requirement: 1,1 kW weight of the machine ca.: 230 Kg dimensions of the machine ca.: 0,75 x 1,05 x 1,3 m Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° Recording MC 3 - B16. Drill chuck 3 - 16 mm. spindle protection. Machine stand. incl. tool box with various tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.