140,793 used machines on RESALE, but how to find them? Machine Search
Iberdrill Gear Column Drill Series T, TL25 drilling capacity for steel (ST 60) at continuous power S1: D25mm drilling capacity for grey cast iron (GG 20) with continuous power S1: D30mm thread cutting capacity for steel (ST 60) with continuous power S1: M 18 thread cutting capacity for grey cast iron (GG 20) with continuous power S1: M 22 Tool holder in the spindle: MK 3 spindle stroke (drilling depth): 120 mm Motor power spindle: 0.82/1.2 kW Drive: 8-speed gearbox with pole-shiftable motor Speed adjustment: manual Speed range for 50 Hz motor, n=1,500/3,000 rpm, pole switchable 65 -125 -185 - 365 - 540 - 1,055 - 1,560 - 3,060 rpm Feed: 300 mm x 270 mm Column diameter: 100 mm Distance spindle center / column (projection) 250 mm Machine weight (net) 250kg Gross weight 310kg Dimensions transport packaging (LxWxH) 2.14m x 0.6m x 0.8m Gearbox ...
Washing screw stainless steel, screen basket wash screw, drum sieve, blanching drum used, Manufacturer: WOLFF Type: B 1000/3000 Diameter approx. 1000 mm, Drum length approx. 2800 mm partly stainless steel Drive 0.55 kW Total dimensions approx. 4500 x 1800 x 2200 m. Changes and errors in the technical data and information excepted.
Max. speed: 20km/h, weight: ca. 19.4t, on-site inspection is possible.
lapping machine, year 2016, 9977 operating hours. Used machine. More info & price on IndustrialBuyer.
max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 12000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW weight of the machine ca.: 0,6 t Mechanic: very good: Optical condition: very good: The machine can be viewed under current.: operating key and instruction: 2016 S25 003004 400 V, 50/60 Hz, with CEE plug and cable Color: light gray motorized height adjustment, axial grinding spindle adjustment Equipment: Opto-electronic measuring device with measuring electronics Image processing, PC (Original ISOG) CCD camera and monitor Dividing head Sk 40 with dividing disk 24 R 1 dividing disk each 14, 16, 18 Tightening screw M 16 Counter bearing complete with 4 center punch points Center point Sk 40 with driver Twist-u. Relief grinding device with rac ...
connected load frequency: 230 V battery: 24V / 100Ah Brush diameter: 510 mm turning speeds: 175 U/min 0: Luft 24 L / s tank capacity: 50 / 50 Liter weight: 160 kg range L-W-H: 1,1 x 0,52 x 1,0 mm Daewoo floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Fresh/waste water tank volume: 50/ 50 L The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The machine is in good technical condition; testing is possible by prior arrangement. Control system: Meldas 500. Max. bar diameter: 25 mm. Max. machining length: 250 mm per clamping. Max. back spindle clamping diameter: 25 mm. Main spindle speed: 200–8,000 rpm (3.75/5.5 kW). Cross-driven tool speed: 200–5,000 rpm (0.4 kW). Back spindle speed: 200–6,000 rpm (3.75/5.5 kW). Max. number of tools: 19. Turning tool dimensions: 16 x 16 mm. Axes: X1, Y1, C1, X2, Z2. Rapid traverse: 20 m/min. Total power input: 11 kW. Footprint: 1.3 x 2.8 m; height: 1.76 m; weight: 2.6 t. Bar feeder: LNS Hydrobar Mini-Sprint S2; max. bar length: 3.45 m; dimensions: 4 x 1 m; height: 1.3 m; weight: approx. 700 kg.
max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 12000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW weight of the machine ca.: 0,6 t Mechanic: very good: Optical condition: very good: The machine can be viewed under current.: operating key and instruction: 2189 400 V, 50 Hz, with CEE plug and cable Colour: body pastel turquoise RAL 6034 Stand blue-grey RAL 7031 Motorized height adjustment, axial grinding spindle adjustment Machine as new Accesories: SK 40 dividing head with 24 R dividing disc Graduated disc 20 R Tightening screw M 16 69871 Spiral and relief grinding device with rack housing Counter bearing with 4 tailstock centres Center point with driver Dressing device Dressing diamond Radius grinding device SK 40 complete with se ...
x-travel: 2500 mm y-travel: 750 mm z-travel: 1000 mm table surface area: 2550 x 800 mm spindle taper: SK 50 control: HEIDENHAIN, TNC 150 B The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bottle washer, make Krones, type: Lavatec KES 245-26-080, for 39.000 bph, control range 15.000-46.000 bph, 26 bottles/row, with 80mm cell pitch, 110mm chain pitch, with SPS Siemens S7 control, width: 4.745 mm, length: 11.283 mm.
CATALOG NUMBER 6679 TECHNICAL DATA - max width of the workpiece 250mm - max height of the workpiece 170mm 6 spindles: 1) horizontal lower 250mm 5.5kW 2) vertical right 170mm 5.5kW 3) vertical left 170mm 5.5kW 4) horizontal, upper 250mm 7.5kW 5) horizontal lower 250mm 7.5kW 6) universal 250mm, adjustable at an angle of 360 ° 5.5kW - 6 electrically adjustable spindle up / down - all adjustable spindles up / down, right / left - diameter of the spindles 40mm - 6 introductory pulling rollers, toothed, including 2 double ones - 6 rollers leading out, pulling, rubber, smooth, including 2 double - 2 clamps from above - from the bottom, a roller introducing toothed, pulling, torsion in the table before the first spindle - at the bottom, 2 pulling rollers, metal, smooth - 4 side clamps at the bottom - feed on cardan shafts - pneumatically pressed rollers - smooth regulati ...
Equipment: Code reading system HHS Xtend² for color codes consisting of: • Control unit X-tend² with code reader • Encoder with bracket • Touch screen screen • Folding switch with reading head CT10 • Bobst turntable ejector • Cable set complete for Bobst folding carton gluers
CATALOG NUMBER 6674 TECHNICAL DATA - max planing width 150mm - max planing height 130mm 7 spindles: 1) horizontal lower 150mm 3kW 2) vertical right 130mm 3kW 3) vertical left 130mm 4kW 4) horizontal upper 150mm 4kW 5) horizontal lower 150mm 3kW 6) vertical right 130mm 4kW - diameter of all spindles 35mm - all adjustable spindles up / down and right / left - from above, 4 pulling rollers, toothed - 4 rubber, pulling rollers from above - 2 clamps from above - electric adjustment of the planing thickness of 0.25kW - length of the introductory top 1970mm - central lubrication of the table top - smooth regulation of the feed speed - 1.5kW feed motor - diameters of the extraction ports 6x120mm - dimensions length / width / height 4000x1300x1600mm - weight about 3000 kg - German production - for 6 heads - used planer, very good condition Net price: PLN 36900 ...
Grinding machine Heesemann type MFA 8 Specifications: • Working width (mm): 1300 • CSD system • Transverse grinding unit • Longitudinal grinding unit - shoe • Brush unit • Ionization • Vacuum carpet
bore diameter: 50 mm throat: 3000 mm workpiece height: max. 200 mm total power requirement: 75 kW weight of the machine ca.: 27 t dimensions of the machine ca.: m Brand: CMA Type: GRD50 CNZ 13030 Year of make: 2010 Capacity: 50 mm X: 3.000 mm Y: 13.000 mm Z: 400 mm Spindle taper: N: 3.000 Power : 75 kW Speed: 3.000 RPM Machine weight: 27.000 kg Tap capacity: M30 Drilling depth: 150-200 mm Bed: 13,000 x 3,000 mm Max. workpiece weight: 1,500 kg /m2 Tool changer: 12 pieces External spindle cooling Chip conveyor Can be seen working at a external location The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 3-axis HAAS SL-40HE CNC turning center was manufactured in 2006. It features a maximum spindle speed of 2,400 rpm, a swing diameter over bed of 1,016 mm, and a Z-axis travel of 1,118 mm. The machine is equipped with a full-featured C-axis and driven tools, providing versatile machining capabilities. If you are looking to get high-quality turning capabilities, consider the HAAS SL-40HE machine we have for sale. Contact us for further details.
This 8-axis Maier ML26 C5Y were manufactured in 2019. It features a spindle capacity of 26 mm and a rapid carriage speed of 32 m/min. The machine includes a robust coolant capacity of 260 l and is equipped with a bar feeder and extensive tooling package. Three machines available! If you are looking to get high-quality turning capabilities, consider the Maier ML26 C5Y swiss type turning machine we have for sale. Contact us for further details.
This Klaaßen RZE 12 robotic deburring cell was manufactured in 2023. It features a 6-axis Yaskawa GP-Series industrial robot powered by a Yaskawa YRC1000 controller. Designed for precision finishing on steel components, this cell accommodates workpieces up to 1,200 mm in diameter, 1,200 mm in height, and up to 3,000 kg in weight. If you are looking to add high-quality deburring capabilities to your shop, consider this Klaaßen RZE 12 cell we have for sale. Contact us for further details.
Rated power at 50%ED: 15kVA Short-circuit current: 14.4kA Electrode force: 40-240daN / single stroke Projection: 300mm --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
SAF OPTITOME 15 CNC plasma cutting machine was built in France in 2003. The machine is used to cut shapes in workpieces made of stainless steel, mild steel or aluminium. Depending on the previously choiceed nozzle, workpieces can have a thickness from 2 or 3 mm up to 18 mm. The high cutting quality is achieved thanks to the use of a lightweight and rigid transverse beam with efficient drive, mounted on an extremely rigid and robust machine frame. The installed working table with dimensions (L x W) of 3000 x 1500 mm allows the reduction of mechanical stresses arising during thermal cutting or sheet loading/unloading. The plasma cutting machine is supplied with equipment consisting of among others: a NERTAJET HP 125 plasma source with a power of 125 A and a DIGISAF 100 CNC control. Technical data of the SAF OPTITOME 15 plasma - materials to be cut: stainless steel, mild steel, alumi ...
This 3-axis Krauss Maffei 80-180 CX hydraulic injection moulding machine was manufactured in 2006. It has a machine weight of 3,900 kg and has completed over 4.6 million shots. The machine has been serviced annually by KraussMaffei and is decommissioned, making it immediately available. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 80-180 CX machine we have for sale. Contact us for further details.
Radial drilling machine used for drilling and milling Manufacturer: COLLET & ENGELHARD GmbH Type: BUV 1600 Year of construction: 1976 horizontally and vertically swivelling head Drilling capacity: 50 mm Travel arm: approx. 800 mm max column travel: 1000 mm Speed: 14 to 710 rpm Spindle stroke approx. 300 mm 380 V Dimensions: approx. 2600 x 1300 x 3000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
Plastic processing machine manufactured in 2020. This AMTEC Speed Shrink 40 PRO features a shrink chamber dimension of 600 x 400 mm and a conveyor speed of 0-20 m/min. It operates at a maximum temperature of up to 250 °C and has a power supply of 3-phase, AC 380V. If you are looking to get high-quality shrink wrapping capabilities, consider the AMTEC Speed Shrink 40 PRO machine we have for sale. Contact us for further details.
Working hours machine: 23304 h Working hours laser on: 22804 h Working hours beam on: 10185 h Laser power: 4400 Watt Working range laser: 3000 x 1500 mm Max. steel: 25 mm Max. stainless steel: 20 mm Max. aluminium: 12 mm Length: 12800 mm Width: 6300 mm Height: 2400 mm Machine weight: 15000 kg Electrical connected load: 51 kVA
Waldner Dosomat 12.6 filler and sealer for foil trays. Currently set up for using 82mm diameter foils for meat paste like pate or pet foods. Machine is in lovely condition and available for inspection.
turning diameter: 1250 mm turning length: 1500 mm swing diameter over bed slide: 850 mm total power requirement: 22 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 3100x2150x1825 m Brand: JMTCL Type: CW61125B Distance between centers: 1.500 mm Centerheight: 625 mm Swing over bed: 1.250 mm ø Swing over support: 850 mm ø Maximum turning diameter : 1.250ø x 1.500 mm ø Spindle boring: 135 mm ø The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working hours laser on: 50921 h Working hours beam on: 21717 h Laser power: 3200 Watt Working range laser: 4000 x 2000 x 115 mm Max. steel: 20 mm Max. stainless steel: 12 mm Max. aluminium: 8 mm Length: 11600 mm Width: 5300 mm Height: 2200 mm Machine weight: 16000 kg Electrical connected load: 73 kVA
Press capacity approx.: 3200 kN Bending length approx.: 4280 mm Distance between side frames: 3760 mm Control: Operateur 2000 Term hydraulic: 37900 h Length: 4670 mm Width: 2170 mm Height: 3095 mm Stroke: 350 mm Weight of machine approx.: 24000 kg
Working hours laser on: 57785 (23.03.2022) h Working hours beam on: 40160 (23.03.2022) h Laser power: 5000 Watt Control: Siemens 840 D Working range laser: 3000 x 1500 x 115 mm Max. steel: 25 mm Max. stainless steel: 20 mm Max. aluminium: 12 mm Length: 11100 mm Width: 4600 mm Height: 2400 mm Machine weight: 12000 kg Electrical connected load: 105 kVA
Working range punching: 3000 x 1500 mm Control: Siemens
WE OFFER AN NICE CONDITION LVD , WE CAN MAKE FOR CUSTOMER AS WELL START UP OF MACHINE INCLUDING TRAINING CUTTING CAPACITY 4KW CUTTING PLATES 6000 X 2000 MACHINE WAS COMPLETE OWERHAULED 2 YEARS AGO - SERVIS COST WAS 35000 EUR LAST SERVICE WAS MADE 6 MONTHS AGO MACHINE RUNNING IN THE PRODUCTION TILL FIRST WEEK IN MARCH 2022 WE OFFER MACHINE LOADED ON TRUCK. NEEDS 2 TRUCK FOR TRANSPORT, NORMAL TRUCK FOR CLIENT WE CAN ORGANIZE TRANSPORT AS WELL WE OFFER MACHINE FREE LOADED ON TRUCK. LASER- GE FANUC C4000 - MODEL E TRANSPORT FOR CUSTOMER WE CAN ORGANIZE AS WELL
used
Working hours machine: 2616 h max. working width: 300 mm workable material thickness: 1-15 mm Tension: 400V / 50 Hz Total power: 13,5 A Total current consumption: 7,5 kW Insulation class: IP42 Infinitely variable feed speed: 0-2 m / min Length: 2600 mm Width: 2300 mm Height: 1300 mm Machine weight: 1900 kg
Working hours machine: 120266 h Laser power: 4000 Watt Max. punching force: 300 kN Control: AMNC-F Working range laser: 2500 x 1525 mm Working range punching: 3050 x 1875 mm Length: 6354 mm Width: 5880 mm Height: 2517 mm Machine weight: 30000 kg Electrical connected load: 85 kVA x-axis: 100 m / min y-axis: 80 m / min simultanes (x and y): 128 m / min
x-travel: 450 mm y-travel: 300 mm z-travel: 240 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Matheys Type: 2B Table length: 850 mm Table width: 235 mm X: 450 mm Y: 300 mm Z: 240 mm Maximum speed: 2.500 RPM Variable adjustable speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 640 mm y-travel: 200 mm z-travel: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Milko Type: 12 Table length: 1.000 mm Table width: 220 mm X: 640 mm Y: 200 mm Z: 400 mm Spindle taper: ISO 40 Maximum speed: 1.700 RPM Digital readout: Fagor Automatic feeding on X Machine is equipped with Huron head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Max. printing capacity: 3600pcs/h, print format: 220mm/170mm, product diameter: 15mm-75mm, max. product height: 200mm, printing colors: 1, UV lamp power: 2.4kW. The image does not show the actual machine. Documentation available. Inspection possible by appointment.
FILL TECK FTK 400 – Air Bubble Machines (2 pieces available) incl. 7 removal stands Location: 41564 Kaarst-Holzbüttgen Commercial sale. Invoice with VAT will be issued. Delivery and pick-up possible by arrangement. For sale are two used FILL TECK FTK 400 air cushion machines (also known as Fillteck / Sealed Air FillTeck System). The machines produce air cushions (Void Fill) from PE-HD or PA-PE film on site and are ideal for cavity filling and product protection. Technical data (according to nameplate / mount): • Manufacturer: FILL TECK • Model: FTK 400 • Number of units available: 2 • Year of construction: 1× 2007 and 1× 2016 • Voltage: 220 / 230 V • Power: 1.8 kVA | 0.8 kW • Frequency: 50 Hz • Dimensions (approx.): L 1,200 × W 1,000 × H 1,500 mm • Equipment: with reel (approx. 700 × 700 × 1,200 mm) • Special feature: produ ...
Vertical turning machine manufactured in 1990. This KOLOMNA 1540 F1 features a maximum turning diameter of 4,100 mm and a maximum workpiece height of 2,000 mm. It is equipped with CNC-controlled rams and a powerful 115 kW motor. If you are looking to get high-quality turning capabilities, consider the KOLOMNA 1540 F1 machine we have for sale. Contact us for further details.
Various parts for straightening machines Ungerer, strip width 1500 - 1700 mm - Straightening rollers, stutz rollers, bearing frames, coupling shafts .. - Gears - Engine - Gearboxes, etc. More info on request
Working width: 530 mm Length of the planing table: 3.000 mm Number of knives: 4-TERSA St. Motor output: 5,5 kW FIMAL surface planer type PF 530 N --------------------------------------- NEW MACHINE Partnership Edition Technical specifications: --------------------------------------- Planing table dimensions: 3,000 x 530 mm Feed table length: 1,800 mm Dressing fence dimensions: 1,500 x 175 mm Swivel range stop: 0 - 45 ° 4-knife cutterblock system TERSA d = 120mm: 5,000 rpm Max. Chip removal dressing according to CE: 8 mm Motor 380 volts / 50 Hz .: 5.5 kW Sound level according to EN 27960: 82.9 - 88.9 dB (A) Basic equipment: Electrics according to CE standards Magnetic brake Extraction nozzle d = 150mm Bridge protection control panel operated above Original AIGNER aluminum stop with integrated auxiliary stop --------------------------------------- Special offer from stock: 8,990.00 euros ...
CNC punching machine manufactured in 2015. This Euromac MTX FLEX 12 features a punching force of 30 tons and an X-axis travel of 2,500 mm. It offers a Y-axis travel of 1,300 mm for multitool applications. If you are looking to get high-quality punching capabilities, consider the Euromac MTX FLEX 12 machine we have for sale. Contact us for further details.
Deburring machine manufactured in 2015. This LISSMAC SMW 545 RTTB features a working width of 1350 mm and includes multiple workstations: abrasive wide belt, disc brushes, and a polishing roller. If you are looking to get high-quality deburring capabilities, consider the LISSMAC SMW 545 RTTB machine we have for sale. Contact us for further details.
CNC punching machine manufactured in 2000. This Finn-Power SG6 Shear Genius features a punching force of 270–300 kN and a maximum punch diameter of 89 mm. It has a punching area of 1500 × 3000 mm and includes a tool turret with 20 stations. If you are looking to get high-quality punching and shearing capabilities, consider the Finn-Power SG6 Shear Genius machine we have for sale. Contact us for further details.
1 of used trayshrinkpacker, make Kisters (KHS), type 97/50. Built 1987 with new controls (Siemens S7, Rexroth servos) fitted in 2012. Originally used to pack the following loose beverage cans as 6x4-24 on tray with film: standard diameter 66 mm and sleek diameter 58 mm at a speed 50 trays/minute (splitter pin collating), as well as slim 53 mm diameter cans at 25-35 trays/minute (gating type collating). Last used to pack various cardboard multipacks (roller-bolt collating) on tray with or without film. Operates from left to right as seen from operator's station.
Specifications Model: 25 lpv Tool holder: MK3 Pinole stroke: 110mm Projection: 400mm Drive: 3 phase motor with 2 motor stages and V-belt drive Speeds 14 / 35 – 65 – 70 – 125 – 130 – 200 – 250 – 335 – 400 – 570 - 670 – 1140 – 990 – 1980 rpm Table dimensions: LxW 330x330mm Machine dimensions: LxWxH 410x700x1830mm On the machine, we installed a new motor and renewed the entire electrical system with the step and motor circuit breaker as well as the cables.
maximum number of results exceeded
please refine your search
500 € 
