gluing machine used for sale

TABLE mm 2600 x 530 ROLLS min. ÷ max. mm 0.4 ÷ 3 STRIP FABRIC MAX MM 5 max. workpiece height min. ÷ max. mm 12 ÷ 50 min length or width processable plate mm 190/65 Speed m/min 7

Edge Gluing Machine ESSOR KAM 100 with 100mm working width! Kantenanleimmaschine - Edge Gluing Machine ESSOR KAM 100 Serial-No. 161608 Working width max. 100mm Kaltleim / Cold Glue System

Edge Bander Manafacture: OTT Model No.: K155 Year of construction: 1992 Equipment: Roll magazine Glue unit with hot-melt adhesive - glue basin Pressure zone Cross-cut units Flush milling units Fine milling units with chamfer or radius milling Scraper Wobble

Key data: 5 , 50 , 3147

Edge banding machine with joining unit Alternating pool Automatic edge magazine up to 5 mm strips Clip Flat milling round Pulling blade edge Flat brick blade Brush / Scabible

Edge banding machine with joining unit Alternating pool Automatic edge magazine up to 5 mm strips Clip Flat milling round Pulling blade edge Flat brick blade Brush / Scabible

Fixed stop side on the left. Brief description of the equipment: - Fixed stop side left - Workpiece transport device - Upper pressure - Control Power Control PC22 - Release agent spraying unit - Joining milling unit, 2 x 3 kW - Gluing part A20 Basic for rolls up to 3 mm and strip goods up to 20 mm, with melting unit with granulate container and quick-clamping system - Cross-cut unit, 2 x 0.8 kW, with pneum. Dissimulation - Lubricant spray agggregat - Pre-milled aggreagt 1.5 kW, pneum. adjustable - Mould milling unit FK13, 2 x 0.4 kW - Universal milling unit 4 kW, controlled, with infinitely variable axis - Multi-plastering device MN21 autom. - Finishing unit FA11, with finishing device, detergent application and buffing unit, pneum. adjustable -Noise protection - Free space for additional processing units Further equipment information: - Machine stand throughout f ...

I sell a fully equipped edge banding machine SCM Olimpic S3000, built in 2011: Configuration: Input stop servo motor adjustable Pneumatically adjustable joint milling machines Edge banding with preheating tank Material pressure zone servo motor adjustable Cross-cut saws pneumatically adjustable Strong milling machines can be adjusted manually Pneumatically adjustable radius milling top + bottom Round unit 4-motor pneumatically adjustable Radius puller blade R2 can be switched off pneumatically Surface of the drawing blade Polishing brushes Hot-air blower Separator injection front and rear STARTOUCH control system Control panel Barcode reader Working height servo motor adjustable Material height 6-60mm Edge material thickness 0.4-12mm Feed speed up to 12m/min. PUR glue possible. Second glue tank brand new included. Only 6,153 meters glued! Machine practically ...

MACHINE IS EXCELLENT CONDITION DAILY WORKING IN THE PRODUCTION , MACHINE WILL BE REPLACED WITH BIGGER NEW MACHINE MACHINE IS AWAILIBLE IMEDIATELY. TECHNICAL DATA IS PRESENT ON PHOTOS WE SHIP MACHINE WORLD WIDE FOR THE CUSTOMERS

Edge banding machine Manafacture: IMA Model: Molding edge banding machine Year of construction: 1997 Hot air unit for pre-glued edge material

Tabletop unit for pre-coated edges. With hot air gun 230 volts and roller separator cap. With hand edge cutter to cut off the edge edges.

SPECIFICATIONS: Workpiece length mm: 200 - 3000 Width of the workpiece mm: 20 - 200 Workpiece thickness mm: 30 - 120 Fence length right mm: 1500 HORIZONTAL DRILLING: Drill bit diameter mm: 8 Drilling depth mm: 60 Dowel size mm: 8 x 80 with glue addition Installed power kW: 6 Uses HN - HSS Drill Bits

The machine is designed for automatic gluing of various types frames and profiles covered with foil, varnished or otherwise finished in the shape of rectangular or polygonal. The material of MDF frames glued together. The machine is dedicated to the production of picture frames and finishing frames in doors. Fully automatic work cycle. Max. slat size: -width 120 mm -height 65 mm -minimum element length 250 mm -capacity about 100 sets. Frames The device is suitable for hot melt adhesive. The dimensions of the device are 1100 x 850 x 1300 mm. Weight 160 kg Pneumatic system 6 bar.

Equipment: - PLC control - Edge magazine - Glue application system "Cartridge" -Printed work - Cross-cutting unit - Milling unit, for flush/chamfer/radius - Shape milling unit - Radius scraper blade Specifications: - Length: 4,445 mm - Width: 1,500 mm Working Dimensions: - Workpiece thickness: 6-45 mm - Edge thickness: 0.4-8 mm - Workpiece width: min 60 mm - Workpiece length: min. 180 mm - Feed speed: 8/16 m/min without corner copying - Extraction connection: 2 x Ø 70 mm Static vacuum 1650 Pa Min. air velocity 20 m/sec - Compressed air connection 6 bar technical data subject to actual equipment!

I am selling a fully equipped edge banding machine BRANDT ProfiLine KDF 790, built in 2006: Configuration: Input stop can be adjusted by menu Manually adjustable joint milling Edge banding with preheating tank Material pressure zone can be adjusted by servo motor Pneumatically adjustable cross-cut saws Heavy milling at the top + at the bottom manually adjustable Radius milling top + bottom servo motor adjustable Groove saw unit at the bottom Round unit 2-motor servo motor adjustable Radius scraper blade R2 pneumatically adjustable / second set R1 included Scraper blade surface Polishing brushes Separator injection at the front Clean injection at the rear Working height adjustable by servo motor Material height 6-60mm Edge material thickness 0.4-12mm Feed speed up to 20m/min. Overall length including feed plate 7860mm Mileage status 1,650,000 meters glued. Incl ...

Sales on behalf of a customer, further data on request

Rill- und Leimmaschine für Umschläge - Creasing & Gluing machine for Covers Karl Tränklein CGM (b) Serial-No. 59062/5 Working width max. 500mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

I am selling a fully equipped edge banding machine BRANDT Optimat KDF 220 C, built in 2014: Configuration: Input stop manually adjustable Manually adjustable joint milling Edge banding EVA glue / PUR glue possible Material pressure zone manually adjustable Cross-cut saws pneumatically adjustable Radius milling at the top + bottom manually adjustable Round unit 1-motor manually adjustable Radius scraper R2 can be adjusted pneumatically (set R1 included) Control panel Working height adjustable by servo motor Material height 8-50mm Edge material thickness 0.4-3mm Feed speed 10m/min. Length including feed plate 4150mm Weight 1320kg Very good condition, fully functional ! Including full documentation and CE. Available the same.

Key data: 4 mm, 40 mm

Edge banding machine with joining milling machine (incl. DIA tool), with PLC control (incl. touchscreen) with hot-melt adhesive specification on the workpiece for edge material up to 3 mm: maintenance-free, coated glue basin with alternating tank preparation, HF cross-cut sawing station (approx. 16,000 rpm) for front and rear edge protrusion, HF milling station (approx. 16,000 rpm)with interchangeable plate milling cutter (combination design), Fine adjustment of the milling machine from the operator's side (Hebrock system), Corner round milling machine (minimum workpiece length 300 mm, Hoa0Tgpbz max. workpiece thickness 40mm), surface scraper blade incl. pneumatic excavation, robust chain drive, Double roller top pressure, aggregate viewing window of Machine rear and operator side, extendable Workpiece support, feed rate approx. 10 m/min., workpiece thickness 60 mm, incl. 1x al ...

Top control panel Edge Feeder 1902 Glue application station 1906 Chopping shears 1902 Printed work 1816 Cross-cut unit 1918 Milling unit 1942M Rounding scraper blade 1929 Shape milling unit 1983 Wing scraper blade 1964 Buffing unit 1940 Weight approx. 970 kg Compressed air connection 6 bar Extraction connection Ø 120 mm Length approx. 5300 mm

Key data: 5 mm, 6 mm, 4425 mm

Electricity connection 400V / 11kW Extraction connection Ø 1x100 mm Compressed air connection 6 bar Weight approx. 980 kg Width min/max 760 / 1605 mm, length 4425 mm, height 1720 mm Workpiece thickness min. 6 mm, max. 45 mm Workpiece length min. 180 mm Workpiece width min. 60 mm Feed rate 13 m/min Edge thickness max. 5 mm, rolls 3 mm Edge magazine 1301 with DAZ 11 Glue station 1906 Printing unit 1914 Cross-cut unit 1976 Milling unit flush 1942 Milling unit Radius R2 1943 Ziehklinge 1927 Buffing unit 1944

Machine YOC 1992 Feed speed 8+16 m Solid wood edges, width up to 13 mm Rolls up to 3 mm Edge height max. 45 mm Aggregates: PE Hot Melt Glue Cartridge System Type 1906 1.9 kW Printing unit 1914 1 + 3 rolls Caps 1978, swivel 0-15 degrees Flush milling machineType 1942 2 x 0.6 kW Straight / chamfer up to 15 degrees Radius milling type 1943 2 x 0.6 kW Bevel 45 degrees Radius scraper blade type 1927 Buffing unit Length approx. 5,030 mm Width 1,760/1,605 mm Weight approx. 1,300 kg

A Herbrock edge banding machine is sold Loading facilities available Price is net plus VAT The machine can and should be viewed and tried out on site, as warranty or guarantee is excluded.

completely rebuilt Fidia Combi Unica Machine suitable for the production of folders, sleeves, envelopes, etc. Maler hot glue system, 2 glue heads. optional 3-point gluing for boxes possible. price quoted is for standard machine with 2 glue heads

Edge banding machine FORMAT 4 Tempora 60.06 Touchscreen swivelling control panel, Program memory, automatic pressure bridge adjustment, Feed by means of a transport chain, Pull-out workpiece support, Diamond joining milling cutters in synchronous and counter-rotation, glue basin below, Changing device for glue basins, Use of PUR adhesives possible, printing unit with driven roller, Cross-cut saw with 2 HF motors, Cross-cut saw can be swivelled pneumatically, Flush / radius milling unit, motorized positioning control of the milling unit, x-motion PLUS, Corner Copy Unit, Radius Drawing Blade, Radius scraper blade with motorized positioners, Wing scraper, Operation-controlled surface pulling blade, Spraying device release agent, Spraying device lubricant, Spraying device cleaning agents, -----Specifications----- Edge thickness roll stock: 0.4 - 3 mm, Workpiec ...

Bonding/crimping of toe caps; with preheating device; Spray gluing device (latex adhesive) and pressing device

Demonstration and trade fair machine. including suction line. Equipment: European safety regulations (sign C.E.) olimpic 500 - Version "HP T-ER2" (40) Volt 400 EU Frequency 50 Hz Control console "eye-S" (control panel) Human-Machine Surface Software (HMI) "Maestro active edge" Maestro connect: Preparation without gateway for subsequent installation Fine milling and radius pulling blade unit radius = 1 mm Fine milling and radius drawing blade unit radius = 2 mm Electronic positioning of the upper pressure beams Spacers on the inlet ruler Kit "SAV€NERGY" Interior lighting of the cab and the gluing area "Nesting" sensing rollers Release Agent Spray Unit "AAR" Sprayer for finishing the edge Sprayer for sensitive edges Joining unit "RT-V1" "EASY SIZE" device Glue unit "VC-VM" Ceramic lamp with infrared rays Electronic positioning of the pressu ...

AUTOMATIC EDGE BANDER machine model BIESSE AKRON 245 second hand machine CE regulation : Yes with Instruction Booklets for the application of edges in wood, pvc, veneer, melamine, abs for furniture, furnishings, kitchens, bathrooms, doors, panels and various NC 321 electronic positioner technical data : min. height of gluing panel mm.10 max. height of gluing panel mm.45 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 max. thickness wood edge mm.8 min. panel width mm.50 min. panel length mm.150 feed speed motor power Hp 2 electric press lift telescopic support for large panels soundproof cabin composition : gluing group with glue tank pressure rollers edge feeder end-cutting unit for front and rear vertical cutting of the excess edge - n.2 motors trimming unit with overlapping motors for trimming the upper and lower part of the excess edge - n ...

AUTOMATIC EDGE BANDER machine model STEFANI MONOBETA 4000 second hand machine with Instruction Booklets for the application of edges in PVC, veneer, melamine, ABS , thin solid wood strips for furniture, furnishings, kitchens, bathrooms, doors, panels and various XILIA positioner system technical data : tiltable gluing group: 0° / 7° min. height of gluing panel mm.10 max. height of gluing panel mm.60 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 max. thickness wood edge mm.25 min. panel width mm.60 min. panel length mm.110 adjustable feed speed: from 8 to 22 mt./min. electric press lift telescopic support for large panels soundproof cabin composition : 1. gluing group with glue tank 2. pressure rollers 3. edge feeder 4. end-cutting unit for front and rear vertical cutting of the excess edge - n.2 motors 0,44 Kw at 12000 rpm 5. trimming unit ...

Code: 0134 Brand: BRANDT - GERMANY Model: KTD 53 Automatic edge bander for wood, pvc, veneer, furniture, custom furniture, joinery and various Technical data: Min/max panel height mm 10/40 Edge thickness min/max 0,4 - 1,5 mm Feed speed 7 mt/min on motorized roller conveyor Min panel width mm 65 Composition: Gluing unit Cutting shear unit End cutting unit Upper/lower trimming unit Wheels on base for easy handling Volt 380/50 Total power Kw 4,5 Compressed air 6 bar Overall dimensions mm 1800 x 615 x 1170 h Weight kg 280

SPECIFICATIONS: Workpiece thickness: min. 6 mm - max. 45 mm Edge thickness: max. 3 mm Feed: 8 m/min COMPOSIZIONE: Gruppo rettifica Gruppo colla Gruppo pressore Gruppo intestatore doppio Gruppo raschia colla Gruppo refilatore Gruppo arrotondatore Gruppo raschiabordo Gruppo spazzole

Material thickness range: 0.6mm-10mm, sheet width min./max.: 2x700mm/2x1000mm, sheet length min./max.: 500mm/700mm, max. production speed: 1000 boxes/h, registration accuracy: +/-1mm, machine dimensions X/Y: approx. 6200mm/2950mm, weight: approx. 1000kg. Includes a pressure belt. Documentation available. An on-site inspection is possible.

Undercarriage for edge banding machines Was mounted on Homag Edgeteq S-200, KDF 1130 FC (1100kg). But it certainly also fits on other machines, e.g. Brandt (might have to be adjusted a bit) Length of the U-profiles approx. 1130mm Body height incl. castors approx. 150mm 4 sturdy steel castors as swivel castors with grease fittings 2 Brakes 2 support plates for height compensation The machine can be demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse, see "other offers of this year". provider".

Wood Her STREAMER 1057 XL FU + PU Edge thickness 0.4 - 6 mm Modern control system with selector switch for setting the units Fully automatic edge magazine for roll and strip goods Glue application station GLU-JET cartridges + PU gluing Adhesive application using nozzle technology Scanning nozzle Workpiece height 6-60 mm car. Glue height adjustment High-quality 3-roll printing unit, 1st roll motorized Cross-cut unit pneum. for rolls and strips up to 6 mm edge thickness with pneumatic adjustment of 0-10° slant of the cross-cut saws Milling unit, flush milling 6 mm, radius milling - chamfer milling - 15° Corner copy unit - 3 mm edge thickness Scraper unit for chamfers and radii with 2 scraper carriers Surface Scraper Unit - Finish Buffing unit Spraying device in the inlet and outlet area as well as PU Machine with all machining tools Machine is WORKSHOP TESTED  First  ...

Edge thickness 0.4 - 3 mm Workpiece thickness: max 50 mm Min workpiece length 150 mm Feedspeed 22 m/min

Holz Her Sprint 1312 FÜ + PU heavy version - edge thickness 0.4 - 12 mm PLC Screen Control Pre-milling unit for attaching in front of the glued part Fully automatic edge magazine for roll and strip goods Glue application station cartridges + PU gluing car. Tactile nozzle Workpiece height 6-55 mm Cross-cut unit for roll and strip goods up to 12 mm edge thickness with conversion of 0-10° bevel of the cross-cut saws Milling unit, flush milling 12 mm, radius milling - chamfer milling - 15° MOT - 4 axis Scraper unit for chamfers and radii with 2 pneum scraper carriers. Pneumatic engagement and disengagement Surface Scraper Unit - Finish Spraying Device - PU Machine in TOP CONDITION from stock Lieboch

Dimensions (L/W/H): 1480x760x1160 mm Weight: 180 kg Total power requirement: 3,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3810x575x1520 mm Weight: 1000 kg Total power requirement: 8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 860x1060x1060 mm Weight: 280 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1720x950x1260 mm Weight: 250 kg Total power requirement: 3,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1680x930x1200 mm Weight: 350 kg Total power requirement: 3,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1820x585x1450 mm Weight: 500 kg Total power requirement: 4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2650x640x1400 mm Weight: 700 kg Total power requirement: 5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3200x780x1500 mm Weight: 800 kg Total power requirement: 8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1050x830x1100 mm Weight: 133 kg Total power requirement: 2,1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1470x810x1120 mm Weight: 250 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1700x950x1260 mm Weight: 400 kg Total power requirement: 3,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4200x1500x1500 mm Weight: 1050 kg Total power requirement: 8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1320x700x1120 mm Weight: 125 kg Total power requirement: 1,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 8 kg Total power requirement: 0,9 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

M.Nr. AH/0002544 Ref: 103615 Year of Make: 2020 Motor data: 380 V - 50 Hz - 26 A Top control panel Pre-milling unit Glue basin - PU suitable - with spout Cross-cut station Pressure zone double sawing unit Milling unit top/bottom rounding Corner Copying Wing Scraper Radius Scraper Spraying device Buff Panel thickness: 8 - 50 mm Roll separation: 0.4 - 3 mm Feed rate approx.: 11 m/min Compressed air approx.: 8 - 10 bar, Central suction nozzle on the distributor: 1 x 200 mm Extendable support rail Weight approx.: 1200 kg External dimensions L/D/H approx.: 4600/1400/1700 mm Inspection and delivery date by arrangement. Prior sale and errors excepted. The price includes VAT! Product safety SCM Group Deutschland GmbH Woodworking Machinery Seilerstraße 2, 72622 Nürtingen 07022 92540