130,800 used machines on RESALE, but how to find them? Machine Search
20 Somet Thema E11 Year 1993-1994 360cm width 6 Harness Frames 1 IRO weft feeder 2 Beams (twin beam) 1 Cloth roll 10 Looms working and 10 looms are stopped Each loom can be tested before shipment.
Spiral dough mixer with fixed stainless steel kettle for max. 120 kg dough. Vat cover with swivelling lid part, motor protection by overcurrent relay, electrical switching and control unit in the machine. Kneading process over time with 2 timers and synchronous motor, with automatic switching and switch-off. -Type: SP 120 D -mobile -for max. 75kg flour or for max. 120kg dough- -with 2 automatic timers -Stainless steel spiral and boiler -Boiler diameter 75cm -Boiler capacity approx. 180 litres -Machine mobile on castors with a swivel castor -Locking by 2 locks -with plastic flour dust cover -400 Volt Frequency 50 Hz -8 kW 18A -Weight of the machine approx. 550 kg -Condition "very good" as good as new
We sell a Sinmag spiral kneading machine incl. 3 tank cars (suitable for max. 120kg dough). The machine is in good bakery condition.
Edge grinding machine Work table swivel 45° Grinding height 150 mm Table dimensions 1440 x 710 mm 2 speeds for sanding belt 12/24 m/min 37qqrtber Height adjustment 130 mm from the unit
10 pieces reference G49132R03-09 screw-in M16/ 8 pieces reference A49140R03-09 diameter 40 mm/ unused and in original packaging/ serving for insert SNHU09
Including 2x corner clamping table 590x300x400 mm, 2x 3-jaw chuck, 2x machine clamp, on 1 pallet
Including many accessories, recordings, 4th axis, cabinet complete.
Trailer spreader with wheel drive, stable all-steel construction (mostly galvanized sheets on both sides, primed and painted), net capacity 0.8 m³, spreading material distributor 400mm for spreading widths of 1-6 m with salt (grit 1-4 m), manual spreading pattern adjustment, path-dependent control from 2 - 60 km/h, electrical system 12 volts, digital control panel V-PAD with various displays and setting options (memory card not included) height-adjustable pulling device with overrun brake, towing eye (ball coupling optionally available). Other equipment: protective grille, tarpaulin folding roof, rear siding, operating instructions, quick start instructions, workshop instructions, spare parts lists, connection cable with separation point, etc. The spreader trailer is unused – only soiled by corrosion protection application, last technical inspection until 09-22. Technically almost ...
The ZOLLER Saturn is a precision tool presetting and measuring machine designed for use in CNC machining environments. It allows accurate measurement and presetting of cutting tools before they are installed in milling or turning machines, reducing setup time and improving machining accuracy.
Klinger bottle washer, year of construction: 2000, capacity approx. 10,000 bottles / hour, Siemens S7, liter cell, currently on 330 ml + 500 ml + 500 ml swing-top bottle. Bottle diameter: 50 - 90 mm / Bottle height: 110 - 330 mm. Klinger Bottle washer, Year: 2000, Capacity approx. 10,000 bph, Siemens S7, 1.0 liter pocket cell, currently used for 330 ml + 500 ml. Bottle diameter 50 - 90 mm / Bottle hight: 110 - 330 mm.
Segment bending machine Segment widths: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 and 275mm. Sheet width 1020 mm Sheet thickness 2.5 mm Stand width 1050 mm Opening width mm Bending angle max. 135 ° Machine weight approx. 0.32 t Space requirements approx. 1.4 x 0.6 x 1.3 m
Worktable size 710x710 mm, including cabinet with various accessories
Voltage 220V +-15% ; 10-130A current range; 25% duty cycle (25c) IP21S; breasts and welding hood; Inverter MMA welding machine; 25% 130A 25.2V ; 60% 84A 23.4V; 100% 65A 22.6V; fan cool; 8165
Dough dividing and warp knitting machine WP Rotamat CN 30 pieces -30 pieces -for dividing and rounding doughs -Weight range per dough piece from 30grams to 70grams -Dough insert up to a maximum of 2100gr. -with plastic knife -Dimensions 62x53x140 WxDxH -including 3 knitting plates
Rego SM3 stop and stirring machine Stop and mixer Rego SM3 -for max. 30 liters -with automatic run via timer -manual run -stirring and beating
This machine was completely overhauled 4 years ago and is fully functional. The machine has already been disassembled excluding robot!
Kneader Diosna S 120 Plus Kneading Machine -with 1 timer -with stainless steel boiler and lifting arm -with flour dust cover -2 speeds slow and fast -Machine is mobile on castors with lock -400 volts
The thickness of the bread slice is 15 mm; Slicing speed: up to 70 pieces per minute; easily replaceable blade system
Consisting of 2x ALLMATIC LC90 machine vise, 2x ALLMATIC LC 125 machine vice and accessories, incl. pallet
Forte SBA 241 Automatic Band Saw Cutting diameter 10 - 250 mm Saw blade length 4,100 mm Cutting width 1.1 mm Max. section length 3 - 9,999 mm Cutting speed 11 - 110 m/min Saw blade dimensions 4,100 x 34 x 1.1 mm Total power requirement 1.4 kW Machine weight approx. 1.0 t Space requirements approx. 2.0 x 2.0 x 1.5 m
Machine number: 2300-0053 Speed: 40 – 2,000 rpm Table dimensions: 1,000 x 520 mm Number of table grooves: 6 Travels: X-axis: approx. 500 mm, Y-axis: approx. 400 mm, Z-axis: approx. 300 mm with swivel table, three-axis digital display (Heidenhain), new bellows, new cranks Reference: Showroom/Oberthür
MMG MLL-1 filling machine 2019, built entirely in 316 stainless, doses all kinds of fluids both viscous and dense, you can adjust the volume of the dosing by means of a screen and work with auto activation, being able to regulate the rate or frequency of dosing. Product reception jacketed hopper which can be used to heat or cool the product, electric panel with PLC and anti drip system. Doses from 100g - 1000Kg. Piston works with a servo-motor. Hopper also has agitation for faster filling
Unused Rated power: 5.5 kVA Rated current: 25 A No-load voltage: 243 V Output current: 20-40 A Rated output voltage: 96 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 40% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow start: Contact
Mixed lot of industrial drilling and threading tools.
Dough Kneader Spiral Kneader Diosna SP 120 F -Type: SP 120 F -with membrane keypad -for max. 75kg flour or for max. 120kg dough -with 2 automatic timers -Stainless steel spiral and boiler -Boiler diameter 75cm -Boiler capacity approx. 180 litres -Machine mobile on castors with a swivel castor - 2 locks -with plastic flour dust cover -400 Volt Frequency 50 Hz -Weight of the machine approx. 550 kg -Condition "good"
Box size 500x325x350mm; rated input current A MIG; 35/MMA; 38/TIG28; Rated input capacitance KVA MIG; 8.05/MMA; 8.74/TIG; 6,44;
incl. welding hose and earthing Reference: Schiller - Lot 7
Machine number: 2820-0492 Operating voltage: 400 V Frequency: 50/60 Hz Rated current: 19 A Control: DECKEL CONTUR 3 Travel X-axis: 400 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Feed: 2 - 3600 mm/min Rapid traverse: up to 4 m/min Tool holder: SK 40 Table dimensions: 700 x 460 mm with 7 grooves incl. vice, jaw width: 110 mm Reference: Hüpometall - Lot 22
2-roller banding machine drinking flax ZW 400; cleaned and tested; Working width 400mm; Glue basin height adjustable; suitable for cold glue; 2 pcs. in stock. Two rollers gluing machine potions ZW 400; cleaned and checked; working width 400mm; glue reservoir adjustable in hight; used for cold glue; two machines on stock.
Fiber Laser Machine HLF1530 8KW - IMMEDIATELY AVAILABLE high-quality equipment Laser power: 8kW - VA up to 20mm, FE up to 30mm Sheet size: 3000 x 1500mm Equipment: Precitec Auto Focus Procutter Cutting Head IPG resonator with 8kW incl. German ! On-site warranty THK Guided Tours fast, automatic changing table Sheet metal layer detection automatic nozzle cleaning Siemens touchscreen control with LAN/USB Siemens Drives CE safety by TÜV Süd Sick light barriers around the changing table Will include: Warranty CAD CAM Software Commissioning Delivery within Germany Training offered We have been servicing YAWEI machines for the European market for more than 15 years. We are your service partner for all questions. You can test an identical machine at any time with us under power. Come and visit us !
Bread slicer Treif Diskus 400 Bäko Line circular knife -Circular knife bread slicer Treif Diskus 400 -with new knife -digital control - Cutting width adjustable from 3mm to 15mm - 400V 50Hz - Stainless steel cladding - Weight 195 kg - Operating voltage 400 volts - Control voltage 24V/DC V AC - Rated power 0.9 kW - Years of construction 2007 to 2012 External dimensions : width 80cm depth 70cm height 112cm
Equipped with ground cable and welding pliers
Stored in working condition, CNC controlled. Saw blade 400mm. The buyer must provide his own transport. Elevator available to charge it.
2 machine vices, as good as new and unused Jaw width: 150 mm Jaw height: 50 mm Clamping distance: 300 mm incl. ring wrench, clamping claws, stop and slot nuts Transport dimensions: 800 x 600 x 400 mm, approx. 75 kg
Key data: 4 , 220 , 120
Guiliet Profilier and Hobelautmat with Wepla heads Model: 220 KXR 220 Year built:1990 Condition: very good (used) MAX CROSS-SECTION 220 X 120 MM MIN CROSS-SECTION 30 X 6 MM ENTRANCE TABLE 2000 MM long. PLANING SHAFTS 40 MM Dressing shaft 5.5 kW right and left planing shaft combined 5,5kW Thickness planer shaft 5.5 kW WEIGHT APPROX. 1600 KG Cleaned, maintained and functionally tested. If necessary, we can gladly offer planing heads with continuous cutting edges.
Welding machine |AND a tool case Rated Input Voltage 220 Frequency Hz: 50/60 Rated Input Capacity Kw: 7.5 Rated Input current A: 42 Duty cycle 40C 10 min AND Tool case incl 144 pcs tools
Welding machine |AND a tool case Rated Input Voltage 220 Frequency Hz: 50/60 Rated Input Capacity Kw: 7.5 Rated Input current A: 42 Duty cycle 40C 10 min AND Tool case incl 144 pcs tools
maximum number of results exceeded
please refine your search
