gluing machine used for sale

Gluing station Prakma 105 top gluing Pressing station Prakma 105 2 roller pressing Optional can be bought "as it is" or refurbished, can be sold as stand alone units, with mounting table or with (vacuüm) belt to mount on

Width 500 mm Options for PVA glue

Gluing machine Tünkers Vorwärts 1100 S with lamination station; good condition; Working width 1100mm; Vacuum suction belt; Lamination station 1100. Gluing machine Tünkers Vorwärts 1100 S incl.sheet laminating station; good condition; working width 1100mm; vacuum band; sheet laminating station.

Overview of equipment: - Workpiece support scissor design with roller support, 1000 mm extendable - Infeed ruler automatically adjustable - Fixed stop side left - Inlet interlock pneumatically controlled - Upper pressure via driven composite V-belt - Height adjustment electric - Workpiece transport device via transport chain with rubber support - Release agent spray unit top/bottom - Joint milling unit 2 x 3 kW - Gluing part A20 with 2 rollers, consisting of workpiece preheating, Quickmelt application unit with quick clamping system, 2-roll magazine, pressure zone C (auto-adjustable, with 1 pre-press roll and 6 repress rollers) - Cross-cut unit HL84 0.8 kW, with autom. Adjustment chamfer/straight as well as pneum. Adjustment flush/protrusion caps - Pre-milling unit 1.5 kW, pneum. Adjustment of bündi/protrusion milling machines - Mould milling unit FK11 with autom. Adjustme ...

SCM edge bander model BASIC 1 : - useful thickness of the panel from 8 to 40 mm - feed speed 8 mt/min - overall dimensions approx. 1.7 x 0.7 x h = 1.3 mt Operating groups: - gluing with hot melt glue tank - loader and shearing for roll material - Header kW 0,6 - Trimmers kW 0,5+0,5

Excellent condition - Fully operational - Loading / Transport possible! maximum workpiece thickness 45 mm minimum workpiece length 220 to 350 mm maximum edge material height 50 mm minimum edge material length for fixed dimensions 330 to 400 mm maximum edge material protrusion top and bottom 2.5 mm Edge material protrusion front approx 10 to 20 mm Edge material rear protrusion ca 10 to 30 mm . minimum workpiece width 90 mm minimum workpiece thickness 10 mm maximum length with extension arm 4269 mm Working length with boom 4269 mm Depth with roller plates 1425 mm Working table height 888 mm Working width with support pushed in 210 mm Working table width with support rail extended 680 mm With milling unit

Interchangeable heads used, good condition 16 pcs. Interchangeable heads FK 11/13 devices, exchangeable at the top below. 1 Quickmelt incl. evaluation device level.

1 Quickmelt incl. evaluation device level. Interchangeable heads used, good condition 16 pcs. Interchangeable heads FK 11/13 devices, exchangeable at the top below.

TABLE mm 2600 x 530 ROLLS min. ÷ max. mm 0.4 ÷ 3 STRIP FABRIC MAX MM 5 max. workpiece height min. ÷ max. mm 12 ÷ 50 min length or width processable plate mm 190/65 Speed m/min 7

Key data: 6 , 60 , 4000

Control system MEGA 120 & NESTING GROUPS SCM Group Joining unit with Dia-Leitz tools Glue basin station with quick-change pool Cross-cut unit with swivel function up to 15° Soft and postforming plates can also be known. Flush milling unit with radius milling Solid wood edges 6 x 60 mm Spraying device in front of joining unit Corner rounding unit Edge Brick Blade Unit Surface drawing blade unit Spraying device in front of babble unit Swabing unit Feed speed 10 m/min Machine length 4450 m

Clever HIT S-20 installation kit complete for stationary machine with joint milling (This is a Vorfür unit) Net worth: 11 KW Air heater max. temp.: 650°C at 20 m/min feed List price: € 12.890 our price: € 5.950 Installation/retrofit: € 2.950

Brand 1210F - KDF210 Optimat Brand: Brandt Type: KDF 210 -1210F Year of construction: 2014 Control: Easy Control 10+ Non-contact route control Feed controlled with start-stop optic-indicative sensors Screen: LCD, 420 letters, 4 program memories Configuration: Chain conveyor feed: Standard equipment with central lubrication for the transport chain. Top pressure rollers/product guidance: Zentra control, 2 roller conveyors positioned opposite each other Joint milling unit: 2 x 0.75 KW 200 HZ Including joint milling set in DIA design, with manual positioning via Siko counter, max. 3 mm removal and max. 40 mm workpiece thickness Gluing unit A3 gluing part for hot melt glue and possibility for PU application, magazine, pressure zone with electro-pneumatic 2 point positioning via central control Pressure zone: 1st roller driven and 2 rollers running freely for good and con ...

Edge banding machine Cehisa SYS 5PS - Only about 60 km edges glued / little used! - Condition tiptop - Sturdy construction all important aggregates available: - Infeed ruler - Joining milling - Preheat plate - Glue application - Apply edges (rolls or strip magazine) - Pneumatic pressure roller driven - Pressure roller on top, spring-loaded - Pressure roller at the bottom, spring-loaded - Caps front & rear - Flush milling top and bottom - Copy corners front and back -Scraper - Schwabbelscheibe Accessories: -Tool - Feed rollers for various edge materials - various spare blades - Settings folder Year of construction 2008 Masch. No. 532 The machine is approx. Available at the beginning of October (probably earlier) and would then have to be picked up on a fixed date. Disassembly and collection by buyers The machine is in top condition, ready for  ...

Edge Bander Manafacture: OTT Model No.: K155 Year of construction: 1992 Equipment: Roll magazine Glue unit with hot-melt adhesive - glue basin Pressure zone Cross-cut units Flush milling units Fine milling units with chamfer or radius milling Scraper Wobble

Key data: 5 , 50 , 3147

Edge banding machine with joining unit Alternating pool Automatic edge magazine up to 5 mm strips Clip Flat milling round Pulling blade edge Flat brick blade Brush / Scabible

Edge banding machine with joining unit Alternating pool Automatic edge magazine up to 5 mm strips Clip Flat milling round Pulling blade edge Flat brick blade Brush / Scabible

Fixed stop side on the left. Brief description of the equipment: - Fixed stop side left - Workpiece transport device - Upper pressure - Control Power Control PC22 - Release agent spraying unit - Joining milling unit, 2 x 3 kW - Gluing part A20 Basic for rolls up to 3 mm and strip goods up to 20 mm, with melting unit with granulate container and quick-clamping system - Cross-cut unit, 2 x 0.8 kW, with pneum. Dissimulation - Lubricant spray agggregat - Pre-milled aggreagt 1.5 kW, pneum. adjustable - Mould milling unit FK13, 2 x 0.4 kW - Universal milling unit 4 kW, controlled, with infinitely variable axis - Multi-plastering device MN21 autom. - Finishing unit FA11, with finishing device, detergent application and buffing unit, pneum. adjustable -Noise protection - Free space for additional processing units Further equipment information: - Machine stand throughout f ...

I sell a fully equipped edge banding machine SCM Olimpic S3000, built in 2011: Configuration: Input stop servo motor adjustable Pneumatically adjustable joint milling machines Edge banding with preheating tank Material pressure zone servo motor adjustable Cross-cut saws pneumatically adjustable Strong milling machines can be adjusted manually Pneumatically adjustable radius milling top + bottom Round unit 4-motor pneumatically adjustable Radius puller blade R2 can be switched off pneumatically Surface of the drawing blade Polishing brushes Hot-air blower Separator injection front and rear STARTOUCH control system Control panel Barcode reader Working height servo motor adjustable Material height 6-60mm Edge material thickness 0.4-12mm Feed speed up to 12m/min. PUR glue possible. Second glue tank brand new included. Only 6,153 meters glued! Machine practically ...

MACHINE IS EXCELLENT CONDITION DAILY WORKING IN THE PRODUCTION , MACHINE WILL BE REPLACED WITH BIGGER NEW MACHINE MACHINE IS AWAILIBLE IMEDIATELY. TECHNICAL DATA IS PRESENT ON PHOTOS WE SHIP MACHINE WORLD WIDE FOR THE CUSTOMERS

Edge banding machine Manafacture: IMA Model: Molding edge banding machine Year of construction: 1997 Hot air unit for pre-glued edge material

Tabletop unit for pre-coated edges. With hot air gun 230 volts and roller separator cap. With hand edge cutter to cut off the edge edges.

SPECIFICATIONS: Workpiece length mm: 200 - 3000 Width of the workpiece mm: 20 - 200 Workpiece thickness mm: 30 - 120 Fence length right mm: 1500 HORIZONTAL DRILLING: Drill bit diameter mm: 8 Drilling depth mm: 60 Dowel size mm: 8 x 80 with glue addition Installed power kW: 6 Uses HN - HSS Drill Bits

The machine is designed for automatic gluing of various types frames and profiles covered with foil, varnished or otherwise finished in the shape of rectangular or polygonal. The material of MDF frames glued together. The machine is dedicated to the production of picture frames and finishing frames in doors. Fully automatic work cycle. Max. slat size: -width 120 mm -height 65 mm -minimum element length 250 mm -capacity about 100 sets. Frames The device is suitable for hot melt adhesive. The dimensions of the device are 1100 x 850 x 1300 mm. Weight 160 kg Pneumatic system 6 bar.

Equipment: - PLC control - Edge magazine - Glue application system "Cartridge" -Printed work - Cross-cutting unit - Milling unit, for flush/chamfer/radius - Shape milling unit - Radius scraper blade Specifications: - Length: 4,445 mm - Width: 1,500 mm Working Dimensions: - Workpiece thickness: 6-45 mm - Edge thickness: 0.4-8 mm - Workpiece width: min 60 mm - Workpiece length: min. 180 mm - Feed speed: 8/16 m/min without corner copying - Extraction connection: 2 x Ø 70 mm Static vacuum 1650 Pa Min. air velocity 20 m/sec - Compressed air connection 6 bar technical data subject to actual equipment!

Inv. Num. : 5133 Type: ACTIVA/1-48 Producer: STEFANI Created: 2001 Parameters: Edge thickness: 0.4-16 mm Part thickness: 10-60 mm Minimum edge length in slats: 260 mm Minimum length of solid plywood: 260 mm Compartment capacity: 1.6 kg Drawer capacity: 8 kg/h Space for mounting the device: 1270 mm The machine is in good condition.

EDGE BANDING machine BIMATIC B 220 IR-S second hand machine for edging veneer, PVC, Abs , wood volt. 220 ( 3 phases ) . by applying a 9 kW electric transformer the machine operates at 380 volts. composed by : 1. glue pot 2. edge cutting shear 3. end trimming unit 4. trimming unit / tilting chamfering unit technical details : edge thickness min. / max. mm. 0,4 / 10 panel height mm. 60

I am selling a fully equipped edge banding machine BRANDT ProfiLine KDF 790, built in 2006: Configuration: Input stop can be adjusted by menu Manually adjustable joint milling Edge banding with preheating tank Material pressure zone can be adjusted by servo motor Pneumatically adjustable cross-cut saws Heavy milling at the top + at the bottom manually adjustable Radius milling top + bottom servo motor adjustable Groove saw unit at the bottom Round unit 2-motor servo motor adjustable Radius scraper blade R2 pneumatically adjustable / second set R1 included Scraper blade surface Polishing brushes Separator injection at the front Clean injection at the rear Working height adjustable by servo motor Material height 6-60mm Edge material thickness 0.4-12mm Feed speed up to 20m/min. Overall length including feed plate 7860mm Mileage status 1,650,000 meters glued. Incl ...

Sales on behalf of a customer, further data on request

Rill- und Leimmaschine für Umschläge - Creasing & Gluing machine for Covers Karl Tränklein CGM (b) Serial-No. 59062/5 Working width max. 500mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Einwalzen-Anleimmaschine / Single Roller Gluing Machine Sumbel ENANO Arbeitsbreite max. 250 mm / Working width 250 mm Kaltleim / Cold glue Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Zweiwalzen Anleimmaschine / Two-roller Gluing Machine Sumbel Herold Serial-No. 110 Walzenbreite 500mm / Roller width 500mm Arbeitsgeschwindigkeit / Working Speed 4 - 20m/min für Kaltleim / for cold glue Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

I am selling a fully equipped edge banding machine BRANDT Optimat KDF 220 C, built in 2014: Configuration: Input stop manually adjustable Manually adjustable joint milling Edge banding EVA glue / PUR glue possible Material pressure zone manually adjustable Cross-cut saws pneumatically adjustable Radius milling at the top + bottom manually adjustable Round unit 1-motor manually adjustable Radius scraper R2 can be adjusted pneumatically (set R1 included) Control panel Working height adjustable by servo motor Material height 8-50mm Edge material thickness 0.4-3mm Feed speed 10m/min. Length including feed plate 4150mm Weight 1320kg Very good condition, fully functional ! Including full documentation and CE. Available the same.

Blockleimpresse / Block Gluing Machine Müro 4 x 5000 A3 WT 2 1 Pressing stations with stack high of 50cm 1 Drying hot air blower Stapelhöhe / Stack high max. 52,5cm Pressenbreite / Press width max. 52,5cm Pressentiefe / Press deep max. 32cm Gewicht / Weight approx 60 KG Power supply 230 V - 1100/2150 W Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Kantenanleimmaschine - Edge Gluing Machine Jagenberg KAM 60 Serial-No. 12.30124/11 Working width max. 60mm Kaltleim / Cold Glue system Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

IDM edgebander model ACTIVA GP-R2: – MAGELIS electronic control with video – usable panel thickness from 10 to 60 mm – thickness of edges in rolls from 0.4 to 3 mm – Thickness of solid edges up to 12 mm – 2 feed speeds 12-18 mt/min – upper presser with wheels – motorized adjustment of the upper presser – machine according to CE regulations, year 2004 Operating units: – grinding unit with 2 motors – anti-adhesive unit, with nozzles for liquid – IR lamp for panel preheating – gluing unit with glue tank and upper pre-melter (3 interchangeable glue tanks are supplied) – double tilting trimmers – tilting trimmers – 2-motor rounding unit – PVC/ABS edge scraper unit – glue scraper unit – brush unit

Key data: 4 mm, 40 mm

Edge banding machine with joining milling machine (incl. DIA tool), with PLC control (incl. touchscreen) with hot-melt adhesive specification on the workpiece for edge material up to 3 mm: maintenance-free, coated glue basin with alternating tank preparation, HF cross-cut sawing station (approx. 16,000 rpm) for front and rear edge protrusion, HF milling station (approx. 16,000 rpm)with interchangeable plate milling cutter (combination design), Fine adjustment of the milling machine from the operator's side (Hebrock system), Corner round milling machine (minimum workpiece length 300 mm, Hoa0Tgpbz max. workpiece thickness 40mm), surface scraper blade incl. pneumatic excavation, robust chain drive, Double roller top pressure, aggregate viewing window of Machine rear and operator side, extendable Workpiece support, feed rate approx. 10 m/min., workpiece thickness 60 mm, incl. 1x al ...

Top control panel Edge Feeder 1902 Glue application station 1906 Chopping shears 1902 Printed work 1816 Cross-cut unit 1918 Milling unit 1942M Rounding scraper blade 1929 Shape milling unit 1983 Wing scraper blade 1964 Buffing unit 1940 Weight approx. 970 kg Compressed air connection 6 bar Extraction connection Ø 120 mm Length approx. 5300 mm

Key data: 5 mm, 6 mm, 4425 mm

Electricity connection 400V / 11kW Extraction connection Ø 1x100 mm Compressed air connection 6 bar Weight approx. 980 kg Width min/max 760 / 1605 mm, length 4425 mm, height 1720 mm Workpiece thickness min. 6 mm, max. 45 mm Workpiece length min. 180 mm Workpiece width min. 60 mm Feed rate 13 m/min Edge thickness max. 5 mm, rolls 3 mm Edge magazine 1301 with DAZ 11 Glue station 1906 Printing unit 1914 Cross-cut unit 1976 Milling unit flush 1942 Milling unit Radius R2 1943 Ziehklinge 1927 Buffing unit 1944

Corner milling machine, radius milling machine for machining the corner edges. Banding thickness max. 8 mm Workpiece thickness max. 60 mm Workpiece width min. 90 mm Operation via foot pedal Incl. pull-out workpiece support Dimensions: approx. 700 x 600 x 1300 mm Weight: Approx. 140 kg Suction nozzle: 70mm

Wood Her UNO 1303 + PU Edge thickness 0.4 -3 mm (6 mm) Control panel with selector switches for setting the units Fully automatic edge magazine for roll and strip goods Glue application station: cartridges + PU gluing Workpiece height 6-55 mm Printing unit pneumatic Cross-cut unit for roll and strip goods up to 3 mm (6mm) edge thickness with conversion of 0-10° bevel of the cross-cut saws Milling unit, flush milling, radius milling, chamfer milling - 15° Scraper unit for chamfers and radii Surface Scraper Unit - Finish Machine is CHECKED in TOP CONDITION from very well maintained craft business from stock Lieboch

PART NUMBER: 7531 Specifications: Equipment: -plate - Tape feeder -guillotine - glue tank (granules) - 3 pressure rollers - Ready-to-use saw-cutting unit - 2 trimming units for edge shaping (radial cutters) - 2 polishers - min workpiece length 140mm - min workpiece width 60mm - thickness of the veneered element 10-55mm - edge tape thickness 0.4-3mm - steady rest sliding out of the top - motor power 5.6kW - extraction spigot diameter 120mm - dimensions length/width/height 3480x1050x1020mm - weight about 900kg Advantages: – unpainted – made in Austria – very good condition – used edgebander Net price: 18900 PLN Net price: 4395 EUR depending on the price 4.30 EUR (Prices may change with higher fluctuations)

Frama MDC 1300 roller glue applicator Working width 1300mm Working height 70mm Feed speed 16.5m/min 0.3kw feed motor CE Certified Year of production 1999 Weight 332kg

Machine YOC 1992 Feed speed 8+16 m Solid wood edges, width up to 13 mm Rolls up to 3 mm Edge height max. 45 mm Aggregates: PE Hot Melt Glue Cartridge System Type 1906 1.9 kW Printing unit 1914 1 + 3 rolls Caps 1978, swivel 0-15 degrees Flush milling machineType 1942 2 x 0.6 kW Straight / chamfer up to 15 degrees Radius milling type 1943 2 x 0.6 kW Bevel 45 degrees Radius scraper blade type 1927 Buffing unit Length approx. 5,030 mm Width 1,760/1,605 mm Weight approx. 1,300 kg

A Herbrock edge banding machine is sold Loading facilities available Price is net plus VAT The machine can and should be viewed and tried out on site, as warranty or guarantee is excluded.

completely rebuilt Fidia Combi Unica Machine suitable for the production of folders, sleeves, envelopes, etc. Maler hot glue system, 2 glue heads. optional 3-point gluing for boxes possible. price quoted is for standard machine with 2 glue heads

Edge banding machine FORMAT 4 Tempora 60.06 Touchscreen swivelling control panel, Program memory, automatic pressure bridge adjustment, Feed by means of a transport chain, Pull-out workpiece support, Diamond joining milling cutters in synchronous and counter-rotation, glue basin below, Changing device for glue basins, Use of PUR adhesives possible, printing unit with driven roller, Cross-cut saw with 2 HF motors, Cross-cut saw can be swivelled pneumatically, Flush / radius milling unit, motorized positioning control of the milling unit, x-motion PLUS, Corner Copy Unit, Radius Drawing Blade, Radius scraper blade with motorized positioners, Wing scraper, Operation-controlled surface pulling blade, Spraying device release agent, Spraying device lubricant, Spraying device cleaning agents, -----Specifications----- Edge thickness roll stock: 0.4 - 3 mm, Workpiec ...

Bonding/crimping of toe caps; with preheating device; Spray gluing device (latex adhesive) and pressing device

Demonstration and trade fair machine. including suction line. Equipment: European safety regulations (sign C.E.) olimpic 500 - Version "HP T-ER2" (40) Volt 400 EU Frequency 50 Hz Control console "eye-S" (control panel) Human-Machine Surface Software (HMI) "Maestro active edge" Maestro connect: Preparation without gateway for subsequent installation Fine milling and radius pulling blade unit radius = 1 mm Fine milling and radius drawing blade unit radius = 2 mm Electronic positioning of the upper pressure beams Spacers on the inlet ruler Kit "SAV€NERGY" Interior lighting of the cab and the gluing area "Nesting" sensing rollers Release Agent Spray Unit "AAR" Sprayer for finishing the edge Sprayer for sensitive edges Joining unit "RT-V1" "EASY SIZE" device Glue unit "VC-VM" Ceramic lamp with infrared rays Electronic positioning of the pressu ...

AUTOMATIC EDGE BANDER machine model BIESSE AKRON 245 second hand machine CE regulation : Yes with Instruction Booklets for the application of edges in wood, pvc, veneer, melamine, abs for furniture, furnishings, kitchens, bathrooms, doors, panels and various NC 321 electronic positioner technical data : min. height of gluing panel mm.10 max. height of gluing panel mm.45 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 max. thickness wood edge mm.8 min. panel width mm.50 min. panel length mm.150 feed speed motor power Hp 2 electric press lift telescopic support for large panels soundproof cabin composition : gluing group with glue tank pressure rollers edge feeder end-cutting unit for front and rear vertical cutting of the excess edge - n.2 motors trimming unit with overlapping motors for trimming the upper and lower part of the excess edge - n ...

AUTOMATIC EDGE BANDER machine model STEFANI MONOBETA 4000 second hand machine with Instruction Booklets for the application of edges in PVC, veneer, melamine, ABS , thin solid wood strips for furniture, furnishings, kitchens, bathrooms, doors, panels and various XILIA positioner system technical data : tiltable gluing group: 0° / 7° min. height of gluing panel mm.10 max. height of gluing panel mm.60 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 max. thickness wood edge mm.25 min. panel width mm.60 min. panel length mm.110 adjustable feed speed: from 8 to 22 mt./min. electric press lift telescopic support for large panels soundproof cabin composition : 1. gluing group with glue tank 2. pressure rollers 3. edge feeder 4. end-cutting unit for front and rear vertical cutting of the excess edge - n.2 motors 0,44 Kw at 12000 rpm 5. trimming unit ...