glue unit used for sale

Box format: Length: 100 mm - 400 mm Width: 50 mm - 320 mm Equipment: Standard, right-hand delivery, box material: 200-700 g/m², Box types: normal folding boxes, folding bottom boxes, 4-point erecting boxes, 6-point erecting boxes. Machine can be viewed by appointment while running.

A cold glue labeling machine by Krones is available. Concept: rotary type, label type: cut paper labels, max. label width: 180mm, labeling capacity: approx. 6000 bottles/h, machine dimensions X/Y: approx. 3000mm/3000mm, weight: approx. 3500kg. Documentation available. On-site inspection possible.

Müro A4/5000 block size press; good condition; cleaned and tested; Heat baffle; Stack increase; optionally with dryer. Block gluing machine Müro A4/5000; good condition; cleaned and checked; pile elevation; heating sheet; for option with heater.

blowers Müro block glue presses; Condition used; 2 pcs.; 1x old connector, 1x new connector; cleaned and checked for function. Heater Müro padding press; condition used; two pic.; one old connector, one with new connector; cleaned and checked on function.

Block size press Müro 5000/A4 WT; good condition; cleaned and tested; Heat baffle; Stack increase; with dryer. Block gluing machine Müro 5000/A4 WT; good condition; cleaned and checked; pile elevation; heating sheet; with heater.

Dimensions (L/W/H): 5000x3400x1900 mm Weight: 8000 kg Total power requirement: 48 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 300 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 450 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2600x700x1900 mm Weight: 300 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3030x360x660 mm Weight: 220 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3030x450x660 mm Weight: 325 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4400x4600x3700 mm Weight: 4300 kg Total power requirement: 3,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4400x5000x3700 mm Weight: 4500 kg Total power requirement: 3,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 2,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 2,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 7300x1600x2600 mm Weight: 5500 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 8/300x1600x2600 mm Weight: 4000 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 6300x1600x2600 mm Weight: 3000 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 6300x1600x2600 mm Weight: 5000 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 5500x3400x1900 mm Weight: 9000 kg Total power requirement: 48 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 8300x1600x2600 mm Weight: 6000 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Format range: Box length: 80-535 mm Box width: 50-400 mm Equipment: motorized right turn / back dust margin, laser counter, speed infinitely adjustable via potentiometer. Packing scheme: 1–4 rows / layers, results in 16 possibilities. Overhaul 2025: cleaned, checked, painted, new belts. Machine can be viewed by appointment while running.

Dimensions (L/W/H): 3050x760x2100 mm Weight: 400 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TWO HHS HOT GLUE SYSTEMS to install on any folder gluer or any similar machine- from 1 to 4 glue points- years 2001/2006- Programmation- without guns- Price: 1.000 euro each LOT.

4 glueing poles, 1 pressing bar, hydraulic, external sizes L x H 3000 x 2000 mm, ca. 200 kg

Reference ID: PP-56048 Category: Folder Gluer Manufacturer: Bobst Model: DOMINO 145 II Matic Year Built: 1996 Condition: Good Location: Europe Availability: Immediately Price: 85.000€ LOT Key Features & Equipment • Longitudinal seam configuration • Automatic bottom system (3-point) • 4/6-point gluing capability • Cold glue system by Valco (Year 2019) with 5 nozzles • Hot melt gluing system by hhs-Xmelt (Year 2017) with 3 nozzles • Integrated handle applicator • CoroPack 125 Bobst included (Year 1996) – electronics renewed

Reference ID: PP-56409 Category: Folder Gluer Manufacturer: Jagenberg Model: Diana 165-4 Year Built: 1999 Color: - Impression: - Working Hours: - Speed: - Max. Size: 1650 mm Min. Size: - Condition: Good Location: Europe Availability: Immediately Machine Description: Automatic feeder unit Extended folding and transfer section Press/delivery section Conveyor-type delivery Linear rail-based manual adjustment elements Top control panel / operator panel Safety equipment (protective guards, emergency stop, etc.) Gluing line (glue application infrastructure available)

Overview This KRONES Topmatic labelling machine was manufactured in 2011 and was previously operated in a returnable glass production line. The machine is designed as a head machine with parallel bottle infeed and discharge and is suitable for high-speed labelling applications. The system is equipped with two labelling aggregates: one for neck and front labels and one for back labels. The neck label is applied using hot glue for closure sealing, while the remaining labels are applied using cold glue. The machine is fitted with two glue pumps and includes one spare hot glue unit. The back labelling station is disengageable, while the front station is permanently installed. With 36 bottle plates and a production capacity of up to 33,000 bottles per hour, the machine is suitable for demanding returnable glass operations. The machine has accumulated approximately 44,350 operating hours as of ...

TECHNICAL DATA: Roller length: 1300 mm 02 rollers Ø 190 mm Installed power: 0.75 kW EQUIPPED WITH: Glue tray Roller protection grille Safety Foot Switches

Block size press Müro A3 2000/TM; cleaned and tested; Tabletop device; 2 dryers; insertion width 525mm; Insertion height 200mm. Pading press Müro A3 2000/TM; cleaned and checked; two heaters; working width 525mm; working hight 200mm.

Bobst Media 100 II A2 year 1999 HHS gluing system 6 guns cold glue 1 gun hot glue Disc Gluing

cold gluer Ropi FK 3500 Year: 2010 Format / Working width: 60 x 170 mm / 450 x 450mm Technical specification machine suitable for small and very small products medium or small runs Paper/carton weight: 150 ? 450 g / m2 Type of adhesive/glue: commercially available dispersion glue Glue unit: pneumatic controlled gluing unit with 2 gluing heads Speed-dial controlled Feeder: suction belt feeder Speed: max. 10,000 products / h

roller glue application machine, laminating machine, laminating system, laminating system -Manufacturer: VEB Jonsdorf -Type: LAM 1300 -Working width: 1300 mm -Number of rolls: 4 pieces -Roll diameter: Ø235 x 1310 mm / Ø170 x 1310 mm -Connection value: 2.2 kW -Dimensions: 2470/1000/H1390 mm -Weight: 1300 kg

Roller glue application machine, laminating machine, laminating system, laminating system, layering machine -Manufacturer: Hymmen, glue application machine, layer machine type 36 -Working width: 1300 mm -Roll diameter: Ø175 x 1300 mm / Ø235 x 1300 mm / Ø85 x 1300 mm -Individual components: see photos -Dimensions: 2230/1100/H1410 mm -Weight: 1260 kg

Manufacturer: Proteus, Type: 2 K und Wasserbasierende Mischanlage, Year: 2005, 2 K Mischanlage: yes, Steuerungsanlage für Mischverhältnisse: yes, Füllstandsüberwachung: yes, Wasserbasierend Lacke: yes, 2K-Lacke möglich: yes, Durchflussbereich l/min: 0,8-3,0, Kolbenpumpen gesamt: 4, Kolbenpumpen 1: 30-150, Übersetzungsverhältnis 2: 30:1, Volumenstrom Doppelhub ccm 2: 150, Kolbenpumpen 2: 3 Stück , Übersetzungsverhältnis 2: 30:1, Volumenstrom Doppelhub ccm 2: 150, Luftverbrauch bei 6 bar: yes, Schallpegeldruck db/A: 69, Laquer system - airless: yes, FREE TEXT: ohne Pistolen, Year :2005

Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical data  Capacity: 39,000 bottles per hour (bph) Bottle Formats: 1.5 L Worked Labels: IN REEL two label applicators  Reel Change: Automated Run Time: Approx. 55,000 hours Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC Protection Class: IP 54 (main panel and motors) Working Conditions: 5-40 °C, 30-80% humidity, up to 1000 m altitude, no explosive atmosphere working direction: left-right/clockwise  bottle infeed/outfeed parallel on one side of the machine

Overview This labelling machine was manufactured in 2004 by the German company GERNEP. The model Labetta 4/3/12 784 2A 3SK is equipped with two wet glue stations and three self-adhesive labelling stations, offering flexible labelling configurations for a variety of bottle types. The machine has a capacity of 8,000 bottles per hour and is available immediately. Technical data  Capacity: 8,000 bph (6,500 bph with photoelectronic orientation) Number of bottle plates: 12 Number of labelling stations: 5 Station 1: Wet glue, labelling height 330 mm, steel glue roller Station 2: Wet glue, labelling height 230 mm, steel glue roller Stations 3–5: Self-adhesive Orientation: Photoelectronic bottle orientation via cap Prepared for orientation via bottle cam Electrical height adjustment Operating voltage: 400 V Frequency: 50 Hz Control unit: Siemens S7-200, Touch TD integrated Direction: Right to  ...

Format range: max. 680 mm, min. 126 mm Equipment: Longitudinal seam, folding bottom, double edge, electronic top gluing unit HHS X-pect, 4 channel with 2 application heads, disc undergluer on the left, Bobst CUBE control, vibrator, cleaning brushes in the feeder, primary crusher on the right and left, kicker, counter, digital position indicators, folding floor module A2, pneumatic, intermittent press belt. Overhaul in 2026: cleaned, checked, painted, new press belts as well as feeder and transport belts.

Block Glue Press "Original MÜRO" Mobile undercarriage, Heat air blower: 1100/2150 watts Stack height: 54 cm, press width: 35 cm, press depth: 32 cm Functional with signs of wear 600,00 plus 19% VAT "Original MÜRO" block glue press Mobile base frame, Hot-Air Blower: 1100/2150 Watts Stack height: 54 cm, press width: 35 cm, press depth: 32 cm In working order with signs of wear €600.00 ( Tax free Intra-Community supply / VAT number needed )

capacity / hour ca.: 12000 working direction: right-left (CCW) Strom / Volt: 400

For self Adhesive  Labels and Wet Glue Format Parts for Bottle Size 0.375l , 0,75l , 2.0l

Format range: max. 450 mm, min. 55 mm Equipment: Longitudinal seam, quality assurance system HHS X-tend² with code reader CT 30, Glue seam inspection LNT-300, length control P4 with turntable ejector, Pre-crusher right and left, kicker, counter, small box device, Disc undergluing unit on the left, digital position indicators, clocked press belt. Overhaul 2026: cleaned, checked and equipped with new feeder and transport belts. Machine can be viewed by appointment while running.

Block size press Müro 5000/A4 WT; cleaned and tested; insertion width 350mm; Insertion height 520mm; 1x dryer. Padding press Müro 5000/A4 WT; cleanded and checked; width 350mm; hight 520mm; one heater.

Format range: max. 1650 mm, min. 275 mm. Equipment: Longitudinal seam, folding bottom, double edge, 4-point gluing, electronic top gluing unit with 4 application heads, disc bottom gluing unit on the left, electronic overhaul folding, Feeder with vacuum, cycle feeder, primary crusher on the left, motor-driven upper transport stations, kicker, counter, digital position indicators, extended folding station, motorized threading station, Jagenberg DBS 01 control, 3 x alignment on the press belt, pneumatic, intermittent press belt. Machine can be viewed by appointment while running.

Double-sided adhesive applicator OSAMA S2R-1000 Working width: 1000 mm Min./max. Passage height: 0-90mm Diameter of the application shafts: 185 mm Feed speed: 18 m/min Motor: 0.37KW Technical documentation CE Certificate

Reference ID PP-59295 Category Manufacturer - Model Diana 90-2 Year Built 1992 Machine Description The machine performs side gluing and bottom folding. It is equipped with an HHS system featuring three cold-glue guns. It produces boxes with a width of 90 cm and can handle small boxes with a folded section (the tuck-in flap) as narrow as 60 mm.