glue unit used for sale

Factory-powered LuefterMotor Umwaelzmotor for Unitherm am Lager! Immediately available! with performance; Immediately available

Seidenader T&T Single Unit Track & Trace System for marking and verification of folding boxes/cartons for serialisation and aggregation (Track&Trace), the product codes and variable data (serial no., batch no., expiry date, datamatrix codes, French codes, etc.) printed on the folding cartons are verified via a camera for accuracy and quality, including Wolke m600 advanced Ink jet printer using HP ink cartridges (height of printing max. 12.7 mm), 1 (one) printing station with 2 (two) printing heads located on the back side, infeed conveyor with a length of approx. 300 mm and a width of approx. 185 mm, transfer unit with lower belt and adjustable upper belt for precise and reliable product transfer, carton length (in the direction of travel) max. 220 mm, carton width max. 200 mm, direction of travel from left to right, handheld scanner, electrics 230V + N + PE /50 Hz/1,0 kW, machine floor  ...

Laminator 380 Plus • Automatic feeder with suction head • Inlet stacker • Automatic sheet separator • Film trimming device (includes cutting and trimming blade) • Chrome plated rolling roll •Touch screen • Anti-bend system • Fans for cooling after the grille • Stamping system included used foil rewinder • Hydraulic rolling roller pressure Specifications: Maximum film reel size: 0.75 x 4000 m Film thickness: 23 – 42 μm Film mandrel shaft: Ø75 mm Maximum film reel diameter: Ø340 mm Material Weight: Digital printing paper: 135 – 350 g/m² Other paper: 157 – 350 g/m² Maximum format: 390 x 520 mm Minimum format: 200 x 300 mm Maximum speed: Up to 15 m/min Top rolling roll diameter: Ø120 mm (chrome plated and polished) Lower rolling roll diameter: Ø80 mm (silicone) Accuracy: ±2mm Power: 3200 W Electrical voltage: 200-240VAC – 5 ...

Serialization system for packaging line: suitable for the printing of code data on the cartons. Incl. camera vision system, bad ejection and data management system etc.

Carrier bag machine, SOS block bottom bag machine with flat inside handle unit Photo cell 4 colour tail end printer Bottom patch Bag with handles: Bag width: 20-32 cm Tube length: 33-66 cm Bottom width: 7-18 cm Bag without handles: Bag width: 16-32 cm Tube length: 24-90 cm Bottom width: 7-18 cm

MJ UNI-MIS 037-000 Scope of delivery of the CT Scan Unit: Separation of the CT control room from the CT examination room by lead glass pane Patient access corridor Separate air conditioning in the CT room, control room and corridor Hygiene concept All 3 areas have their own ventilation (CT room, control room and corridor). The control room (seat of the MTRA for CT operation) is ventilated from the outside. The air in the control room has overpressure and escapes into the corridor. The CT room has its own ventilation from the outside, air escapes back to the outside, and the air flow is in balance. The corridor also has its own ventilation. Door widths 90 cm. A step to enter the container. Technical questions from the customer: Where is the exact exit and entry point for the network and electrical equipment at the container? Container door (short container side)  ...

2 X DEUTZ MARINE ENGINES V12 816 626 HP@1800 RPM WITH TWINDISC MG5202 2.48:1

Labelling unit Etiquette unit complete wth pneumatics

UnitHub is an automatic system for storage and retrieval. Could be used to manage a warehouse of for end users to pick up goods. System was installed, but only used for a short time. Now, it is professionally dismantled, packed and ready to be installed wherever necessary. The Unit Hub and all of the roller conveyors, the electric cabinet, software - everything is included. It could be installed by the original producer and their Installation team. If there are any modifications needed, we can organize it. Don't hesitate to ask. UnitHub can be installed both indoors and outdoors; such as in shopping malls, office buildings, residential complexes, courier and postal branches, and outdoors. The UnitHub has three functions: STORAGE of goods/orders; OUTPUT of orders around the clock; RECEIPT of packages for further shipment. With UnitHub, your customers can conveniently rece ...

Technical Data: Distillation vessel volume: 150 liters Constant fill volume: 100 liters Maximum operating temperature: 200 °C Absolute vacuum: up to 50 mbar Heating power: 9 kW Cooling water consumption: 0.8 m³/h Distillation output: 30-60 L/h Features: • Cylindrical, vacuum-tight vessel with flanged lid • Heating via heating floor or heating jacket (steam at 10 bar, 185 °C max) • Water-cooled stainless steel condenser • Rotating scraper agitator system to remove deposits and ensure heat transfer • Residue discharge valve (manually or pneumatically operated) • Sight glass and explosion-proof lamp for observation of the process

Qty. 1 Second-hand strip rolling mill Mfc.: United Engineering Type: 4-Hi Built: Strip Width: 393 mm (15.5”) Thickness Entry: 4 mm (0.16”) Exit: 1.2 mm (0.05”) Mill Speed: 405 m/min. (1330 Fpm) Strip Tension: 2670 kg (5875 Lbs) Coil ID 406 mm (16”) Coil OD 1448 mm (57”) Coil weight: 3180 kg (7000 lbs)

Fully electronic flour bagging system from 25 to 50 kg. New electronic control IT 6000 E Triple dosing screw 3 x 0,75 kW Pneumatic actuators. 2 x bag nozzle with one-hand clamp. Inlet bin with electronic full/empty sensors. The entire plant has been overhauled and inspected

complete screw and barrel dia. 45 mm for Battenfeld /1000 injection moulding machine is good condition

liquid conveyors lubrication unit for 5 Tetra Pak lines, excellent condition

I sell the Fensterbau cone cutting and slotting system Weinig Unitec 10. Year of construction 1998. Milling heads OERTLI. Available the same. Unit price 5.500 euro. 3 pcs. available. Condition very good !

I sell the window construction kit: 1 pcs. cone cutting and slotting system Weinig Unitec 10. 1 pcs. profile automatic converter center Weinig Univar 10. Year of construction 1998. Milling heads OERTLI. Available the same. Price together 10,000 euros. Condition very good !

Power cables, solar cables, fiber optic cables, fiber optic cables, data cables, LAN cables -Manufacturer: Lapp Kabel, Unitronic data cable -Type: Unitronic LiYCY 8x2x0.5 ROHS -Length: 75 m -Price: complete -Dimensions roll: Ø 700 x 490 mm -Weight: 36 kg

Computer monitor, control unit, operating unit, keyboard, screen, control -Manufacturer: Heidenhain, Manual Plus Monitor from lathe Kern CD 480 -Type: 12.1 VGA Unit Rotating. ID No. 367 957-02 -Dimensions: 400/300/165 mm -Weight: 5.8 kg

Product number: 2357 Model: Slicer with Franz slice unit Type: AE0148179 Serial number: 044 Year of construction: 2018 Capacity: max 120 strokes/min. Cutting thickness: max 20 mm Strip cutter: Franz MST64/545 OS Air pressure: 6 Bar, 72 Nl/min. Power: 3 x 400V, 50Hz, 5.5kW Weight: 1100 kg

Pilz safety system PNO m0p 773110, stocked goods, no functional test, manufacturer number: 773110. EAN number: 4046548013153

Power cables, solar cables, fiber optic cables, fiber optic cables, data cables, LAN cables -Manufacturer: Lapp Kabel, Unitronic LAN Kabel CAT.7 4 x 2 x 23AWG -Type: STP/SH PiMF 600 Art. 2170614 -Length: 244 m -Price: complete -Dimensions roll: Ø 550 x 350 mm -Weight: 22 kg

Support grinding device, support grinder, support grinding device, circular grinding device, bench grinder, grinding machine, stand grinder, stand grinder, combination bench grinder -Grinding device -Voltage: 380V -Drive: 1.6/1.15 kW -Speed: 2800/1400 rpm -Dimensions: 390/223/H240 mm -Weight: 20kg

Specifications Tower storage system for sheet metal Manufacturer: KASTO Type: UNITOWER B3.0 Year of construction: 2008 Number of magazines: 49 Pull-out trolley on rail

450 x 130mm aperture size. 320mm wide conveyor belt. Checkweigher table width 390mm. Air blast reject system. 2200mm machine length. 900mm line height.

355 x 200mm aperture. Usable aperture of 155mm. Conveyor width of 300mm. 850mm line height with adjustable feet. 475mm weigh pad length. Right to left production. M&S spec machine.

One used SCHLATTER automatic binding unit for welded mesh stacks. Comprising a left and right unit; automatically binds the mesh stack

Key data: 5 , 50 , 3147

Edge banding machine with joining unit Alternating pool Automatic edge magazine up to 5 mm strips Clip Flat milling round Pulling blade edge Flat brick blade Brush / Scabible

Prodicon Batch Off Unit 500mm sheet width Inlet speed 0-10m/minute Sheet thickness 5-12mm No. of cooling sections 3 No. of fans 9 Complete with electrical control panel. Year 2009

Triplex Plunger Pump Unit KD825 URACA for Press Drive consisting of: Pump KD825 URACA Pressure Lubrication unit Water-Oil cooler Reduction bevel helical gear box (angular design) with couplings Base frame open type Discharge ball resonator (pulsation damper) Pressure safety valve, set pressure 360 bar Induction electric motor Process medium: water-oil emulsion Discharge pressure 325/320 bar Capacity 1,330 l/min Pump speed 340 min-1

MBO K 800/6 S-KTLT with 2nd unit Age: 2006 Format: 780x1200 mm Equipment: Pallet Feeder K 800 - FP120 MBO Navigator Touchscreen Control Panel 6 buckles 1x Side buckle 2x knives 1x Side Buckle Electr. Double sheet control Anti Noise hood Slitter Shaft Cassette MWK Scoring, Perforating and Cutting devices for standard operations 2nd Folding Unit K 800.2-2-78/4 with double benefit device

Year of construction unknown Imprint suitable for Heidelberg MO Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Working width: 1350 mm Number of sanding units: 1 st. Workpiece thickness max.: 160 mm sanding belt measurements: 1370 x 2150 mm Feed motor: 0,75 PS Unitek wide belt sander Excel LC 1350 1N KRT --------------------------- 1-BELT MACHINE WITH COMBI UNIT ROLLER/SHOE FOR SOLID WOOD VENEER AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm 1350 - GRINDING BELT LENGTH mm 1370 X 2150 - MAX. WORKPIECE THICKNESS mm 160 - Steel CALIBRATION ROLLER mm 180 - GRINDING SHOE WIDTH mm 50 - BAND MOTOR POWER HP 15 - BELT SPEED m/s 18 - FEED MOTOR POWER HP 0.75 - Adjustment gear feed carpet with infinitely adjustable speed m/min 4/ 20 - HEIGHT ADJUSTMENT MOTOR HP 0.33 - Mechanical BAND OSCILLATION ECO GEAR PATENT SYSTEM” - 1 PC. DRUM BRAKE for belt braking - Swivel ROLLER for belt tension - 2 pcs. PRESSURE ROLLERS, with rubber coating - EMERGENCY STOP SWITCH EDGE in the inlet - ELECTRONIC DISPLAY ...

Working width: 950 mm Number of sanding units: 1 st. Workpiece thickness max.: 160 mm sanding belt measurements: 970 x 2150 mm Feed motor: 0,55 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 1350 mm Number of sanding units: 2 st. Workpiece thickness max.: 160 mm sanding belt measurements: 1370 x 2150 mm Feed motor: 0,75 PS The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 1350 mm Number of sanding units: 2 st. Workpiece thickness max.: 160 mm sanding belt measurements: 1370 x 2150 mm Feed motor: 0,75 PS The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 5648 Type: XOTM 60 Producer: UNIT Created: 2004 Parameters: Minimum tube diameter: 20 mm Maximum tube diameter: 60 mm Machine length: 4900 mm Machine weight: 130 kg

Qty. 1 Second-hand steel strip production plant The plant consist of below lines: 20-High Sendzimir Mill Mfc.: Waterbury Farrel Built: 1960 Strip width: 330 – 660 mm Thickness Entry: 4.0 mm Exit: 0.076 mm 2-High Temper Pass Mill Mfc.: United Eng. & Foundry Co. Built: 1960 Strip width: 400 – 630 mm Thickness Entry: 1.6 mm Exit: 0.25 mm Tension Leveller Mfc.: TBA Built: 1982 Strip width: 500-1067 mm Thickness: 0.08-0.3 mm Tensile strength: 30-75 kg/mm² Bright Annealing Furnace Mfc.: Salem & Herr Equipment Built: 1960 Strip width: 150 – 610 mm Thickness: 0.254 – 2.7 mm

turning diameter: max 300 mm turning length: max. 2000 mm control: Siemens Serie 810D turning spindle: Durchlass 90 mm : 300 mm Feed speed: 6/6 m/min. number of tools: 8 quill stroke: 300 mm diameter of quill: 105 mm taper MK: 6 coolant tank: 100 l total power requirement: 15 kW weight of the machine ca.: 4650 KG dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Container cooling units (container cooling systems) available in good condition. They have the following specifications: Temperature range: -25 C° - Weight: 600kg (due to aluminum, steel and copper) Refrigerant: R-134a -Year of manufacture: 2008 The price indicated is per unit without container. A total of 28 cooling units are available. All 28 cooling units fit into a 40Hc container for transport.

Container cooling units (container cooling systems) available in good condition. They have the following specifications: Temperature range: -25 C° - Weight: 600kg (due to aluminum, steel and copper) Refrigerant: R-134a -Year of manufacture: 2008 The price indicated is per unit without container. A total of 17 cooling units are available. All 17 cooling units fit into a 40Hc container for transport.

Danmatic Spray unit spray glazing machine 2017, stainless, spray glazing machine, belt dimensions 2150mm x 820mm, stainless mesh belt, four top mounted spray jets, adjustable pressure controls, can work with a great variety of liquids from pure water to oil and glaze egg, mobile, 3Ph

Qty. 1 Second-hand plate storage system Mfc.: Kasto Maschinenbau GmbH Type: UNITOWER B1.5 Built: 2018 Still in operation! Number of storage spaces: 86 Pallets size: Usable dimensions: 3000 x 1500 x 90 mm – L x W x H External dimensions: 3290 x 1616 x 160 (70) mm – L x W x H Payload per pallet: 1500 kg Use for surface elements made of wood, polycarbonate, etc. Only about 300 movements have taken place since 2018 - one movement takes about 2 minutes. The system is regularly serviced by the manufacturer. Speeds Hoist: 16.0 m/min. Pull and push device: 20.0 m/min. System dimensions approx.: 8855 x 5900 x 5730 mm – H x L x W

Dräger Protection Unit 6904409 complete unit Year of construction 2013 The item is technically in good condition, Nevertheless, this is a used items, which shows signs of wear, or may have.

a pasteurization unit with pouch packer for liquid product Find more here - /

Wittmann TP-PRIMUS C:90 Tempering Unit (2x) (2005)

Years: 1x 2012 1x 2011 1x 2010 1x 2006 2x 2008 (Is possible to buy 6 pieces)

Refer to code 1172 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

2. Other and Auxiliary Systems SNA-19. Water Recooling System - Room E 06, Water Recooler 2 units Cooling Compressor Systems BOGE C7 (Screw Compressor), functional, Built: 2015 Manufacturer: BOGE GmbH Technical Data: - 5.5 kW; 380V - 8/13 bar - 0.9 m³/h - Intake capacity: 5-50 Mm³/h - Mass: 0.21 t Find more here - / Contact us at -