glue applicator used for sale

Glue tank with rollers for sanding machine IMA

CNC – controlled frame gluing press for automatic gluing of all frame constructions with dowel connection – tine connection – 45° miter connection, automatic centering of the press plates and the upper press beam. The frame presses are available in the following sizes – pressing area 3,000 x 1,700 mm – 3,000 x 2,000 mm and 3,500 x 2,500 mm. Two vertical press cylinders – pressing force per cylinder 7 tons (optional four vertical press cylinders). Two horizontal press cylinders, stroke range 150 mm - pressing force per cylinder 3 tons. Maximum tread depth 130 mm (larger tread depths on request). CNC control from SIEMENS® with touch screen for calling up three automatic pressing cycles, 99 compression programs can be stored per pressing cycle. Among other things, the following parameters can be programmed: frame size, frame profile structure, pressing time, pr ...

Glue application machine for sanding machine IMA

Technical data: - Foam rubber roller width 180 mm- glue roller for gluing surfaces- with stand - absper lever for stopping the glue flow

Format range: max. 1350 mm, min. 45 mm Equipment: Longitudinal seam, folding bottom, double edge, 4 + 6 point gluing, HHS electronic finishing unit, 4 channel with 4 application heads, High pressure, disc gluing unit left, electronic Overhaul folding with servos, extended folding station, module 150, Primary crusher right and left, kicker, counter, vibrator on the jetty, digital position indicator, motorized threading station, motorized Transfer station, additional means transport in folding, vacuum on Overturning, camera surveillance, Jagenberg DBS 01 control, fully automatic format setting Jagset II, pneumatic, clocked Press strip. Overhaul 2023: cleaned, checked, painted and with new feeder and transport belt. Other: The machine can be viewed while running by appointment.

Technical data: - Pressure vessel 12 litre- operating pressure max. 5 bar- glue container with pressure gauge glue gun with pointed nozzle - glue hose 4 m- glue indication valve with pointed nozzle water tank for glue gun with holder

Technical data: - Foam rubber roller width 72 mm- glue roller for gluing surfaces- with stand - absper lever for stopping the glue flow

Format range: max. 1000 mm, min. 126 mm Equipment: Longitudinal seam, folding bottom, double edge, electronic top gluing unit HHS X-tend, 4 channel with 2 application heads, Disc gluing unit left, feeder with vibrator, folding floor module A2 Primary crusher right and left, kicker, counter, Bobst CUBE control, additional middle transport at the top/bottom in folding, cutting alignment on the press belt, pneumatic, intermittent press belt. Overhaul 2023: cleaned, tested, painted and fitted with new feeders and Transport belts, as well as equipped with new press belts. Other: The machine can be viewed while running by appointment.

Technical data: - working width 300 mm- glue roller diameter 140 mm- rubber hardness glue roller 70 shor speed 20 m/min.- Power 0.25 kW- voltage 400 V, 50 Hz- quick change device of the glue roller glue container and rolls made of stainless steel- CE Conformity dimensions: 800 x 600 x 500 mm- Weight: 60 kg

Technical data: - pressure vessel 8 litre- operating pressure max. 5 bar- glue container with pressure gauge glue gun with pointed nozzle - glue hose 4 m- glue indication valve with pointed nozzle- water tank for glue gun with holder

Technical data: - working width 300 mm- 2 x glue roller diameter 140 mm- rubber hardness glue roller 70 shor speed 20 m/min.- Power 2 x 0.25 kW- voltage 400 V, 50 Hz- quick change device of the glue roller glue container and rollers made of stainless steel- mechanical height adjustment of the upper glue application roller- mechanic digital display of the passage height- CE conformity

1 used Nordson order head, type Mini Blue II SureBead, 230V / 100W, with solenoid valve and 40-degree connection, built in 2013. 10 pcs. available (intermediate sale reserved).

1 used Nordson 16 foot hose, Blue Series, 240V/504W. Built 2013. Nordson part number 2747976. 6 pieces available (intermediate sale reserved).

1 used Nordson 24 foot hose, Blue Series, 240V/760W. Built 2013. Nordson part number 274797. 6 pieces available (intermediate sale reserved).

Built in 2001 ; working condition

Format range: max. 1850 mm min. 420 mm Equipment: Longitudinal seam, folding bottom, double edge, 4-point gluing, electronic HHS top gluing unit with 4 application heads, disc bottom gluing unit on the left, Primary crusher left, motorized format adjustment, Kicker, counter, friction feeder with clocking, vacuum at the feeder, digital position indicator, motorized transfer station, middle station in folding, cutting alignment according to the feeder, Cutting alignment on the press belt. Overhaul 2023 with new feeder and transport belts, new Press belts top / bottom, cleaned, checked, painted Other: The machine can be viewed while running by appointment.

Reference ID: PP-35237 Category Folder Gluer Manufacturer Bobst Model E-Fold-1100 Elite Year Built 2021 Condition Very Good Location Europe Availability December 2023 Machine Description Crash-lock bottom boxes Straight-Line boxes 4/6 corner boxes Card board:200-800 g/m² Corrugated board:N/E/F Flute Belt Speed:320 m/min (420 m/min as optional) Jogging Speed: 20 m/min Strong and steady construction to improve running conditions; Modular design for easy adaptation to accommodate various boxes from food, pharma to cosmetic, electronics and so on; New HMI with icon design for easy communication ; Wired for connection with other equipment including smart logistic, electronic gluing, inspection system and so on; Equipped with high speed electronic counting device for accurate box count; Special B-Type lower glue pot for easy maintenance and glue wheel exchange; Smart ...

Amtmann Fassong banding machine / laminating machine. Year of construction: 1986 Step 1: Foil blanks are separated from the stack by the vacuum plate and partially glued via the gluing unit Work step 2: The A4 cardboard blanks from the additional cover sheet feeder with conveyor belt are separated and transported to the transfer position. Step 3: The partially glued film blank is transferred to the positioned A4 cardboard blank for transfer to the final position. Step 4: Transport by means of a pressure unit. Suitable for solid, shape, edge or strip gluing, depending on the design of the glue transfer roller in time, from different carriers, such as punched blanks, etc. The Fasson banding machine is designed to speed up the production cycle.

Block glue press Müro 5000/A3 TM; good condition; cleaned and tested; Table equipment; Format A3; Stack increase. Padding press Müro 5000/A3 TM; good condition; cleaned and checked; table top machine; size A3; Pile elevation.

Format Range: max. 1650 mm min. 275 mm Equipment: Longitudinal seam, folding bottom, double edge, 4-point gluing, electronic gluing unit HHS X-tend 8 channel with 4 nozzles, Disc gluing unit link with re-pumping device, electronic Overtaking fold with servos, feeder with vacuum, primary crusher left, Kickers, counters, digital position indicators, pressing device after folding, motorized threading station, Jagenberg DBS 01 control, Fully automatic format setting Jagset II, corrugated cardboard package , 3 x alignment with the press belt, pneumatic, clocked press belt. Press belt extension, video surveillance tray, cleaned, tested, new conveyor belts, new press belts at the top / bottom Other: The machine can be viewed while it is running, by arrangement.

Equipment: Longitudinal seam, folding bottom, double edge, 4+6 point gluing, electronic gluing unit HHS X-tend² 8 channel with 6 application heads, Quality Assurance System HHS X-tend², BJ. 2014 with code reader, Bottom Glue Control, Nozzle Glue Control & Linear Ejectors, Belt crusher on the right, disc gluing unit on the left, electronic overhaul with servos, feeders with vacuum, Primary crusher left, kickers, counters, digital position indicators, Pressing device after folding, motorized threading station, Jagenberg DBS 01 Control, Video Surveillance Storage, pneumatic, clocked press belt. Overhaul 2024: cleaned, tested, new conveyor belts, new press belts at the top / bottom Other: The machine can be viewed while it is running by arrangement.

With magazine

Tissue-Tek® Glas™ g2 Sakura Flap Gluer https://sakura.eu/fr-fr/solutions/conventional/glas-g2 VERY GOOD CONDITION Ref. 6160 :Tissue-Tek Activated Carbon Filter Purchase date: July 2017 Under annual maintenance contract

finger jointing spare parts - GRECON Glue application system Glue system compl. Drive plate with Glue and dosing roller L=270 mm (300 possible) 2 Stueck

ID PACK Easy Box tray erector gluer carton size 340 x 210 x 135 year 2016

spare parts - cook bolinders - glue application with gluing combs Ccmealplm For adhesive application on compact wedge zinc systems (compact wedge zinc machine ) Praezisions glue comb system with working width max. 250 mm, 2 tine laenia 15 mm or alternatively 20 mm

Glue dosing station MAYER AND MAYER DXR R2020R L-P-PUB PDX20 40-100 P manufactured in 2015 in Germany by MAYER & MAYER HANDELS GMBH. The station was in use for about 3 months in the process. After this time, it was shut down, cleaned and properly secured. All gaskets in the station were replaced with new ones. It is a charging station for manual dispensing / application guns for two-component adhesives. The gun is included for free. Spare parts are offered for the station. Price of the parts to be individually agreed.

Endoline 402 Automatic case gluer, 2016, up to 30cases per min, cases between 160mm - 500mm L, 100mm - 400mm W, 100mm - 500mm H, with Nordson problue gluer, infeed conveyor 2500mm x 500mm, roller conveyor on outfeed section, 3Ph

Block glue press Müro 5000/A2 WT; Working width 705mm; 3x dryer; Stack increase; Heat guide plate; Stand unit. Padding press Müro 5000/A2 WT; working width 705mm; 3x dryer; pile elevation; heating sheet; floor mounted machine.

Jagenberg Diana 90 3 points box folder gluer 2019 model Ero gluing system Machine is in good condition

Format Range: max. 1000 mm min. 126 mm Equipment: Longitudinal seam, folding bottom, double edge, 4-point gluing, electronic gluing unit HHS, 8 channel with 2 application heads, Disc gluing unit left, new electronic overhaul folding with servo motors, 4-point control with touch screen and Order memory, feeder with vibrator & dentistry, Folding floor module A2 with central transport, primary crusher right and left, Kicker, counter, Bobst CUBE control, digital position indicators, pneumatic, clocked press belt. Overhaul 2024: cleaned, tested, painted and equipped with new and conveyor belts. Other: The machine can be viewed while it is running by arrangement.

Automatic Carton Folder Gluer For Processing Straight Line, Crash Lock, 4 and 6 Corners Style Cartons, Max. Open Blank Width: 1100mm, Min. Open Blank Width: 120mm, Max. Feed Up Length: 1100mm, Min. Feed Up Length: 55mm, Max. Belt Speed: 325m/min, Material: Carton Board Upto 800gsm - Corrugated Upto E Flute, Complete with: - Bottom Belt Friction Feeder, Feeder Belts with Suction, - Vibration System in Feeder, - Left and Right Hand Side Belt Pre Brake System, - Left and Right Bottom Glue Pots, - HHS C 1100 with 4 x Glue Guns, - Servo Motor Operated Back Folding System, - 3 x Belt Carriers in Folding Section, - Batch Kicker Counter, - Heavy Duty Double Frame Trombone Section, - Compression Belt Delivery with Addition Press Belt for Crash Lock Boxes

Format Range: max. 1140 mm, min. 45 mm Features: longitudinal seam, folding bottom, double edge, 4-point gluing, Infinitely adjustable feeder with servo drive, Crop alignment right / left, motorized format adjustment, electronic gluing unit HHS Xpect with 4 application heads, Disc gluing unit left, feeder with vibrator, mini box device, Radio remote control, new servo overhaul (browse) with touch screen, Primary crusher right and left, kickers, counters, digital position indicators, lowerable transport of means in folding, press rolling, Box alignment on the press belt, video surveillance in the transfer station, pneumatic, clocked press belt, new Siemens control system with touch screen, Overhaul 2024: cleaned, checked, painted, new feeder and transport belts. Miscellaneous: The machine can be viewed while it is running by arrangement.

Glue application with gearbox Make: IMA - glue application 04.088 - gearbox 04.156

Panel length: 3200mm, panel width: 1000mm, max. workpiece thickness: 38mm, min. infeed length: 500mm.

We have the following Nordson Hotmelt units for sale: 2 x 3500 2 x 3800 1 x Pro Blue 4 1 x Pro Blue 7

Barberan Lamination line include following machines: 1- GLUE UNIT ( MELER BRAND 250 LT) 2-FRONT LIFTER 3-FORK FOR FRONT LIFTER 4-GLUING MACHINE BARBERAN EN-PUR-4-1600 5-CONVEYOR BARBERAN IT-4000/16 6- LOADING FOR FOR CONVEYOR 7-PRESS BARBERAN CAL-H-2-1600 8- GUIDE ROLLER 9- BACK LIFTER

Sheet format: 100-1000x40-1120mm, max. carton thickness: 20mm, output carton/ paper: 7-60/ 7-40 sheets/min, weight: 1t, with pressure belt and sheet laminating station, including documentation.

Working width: 1850mm, without accessories, spare parts or documentation, has been maintained regularly, the machine is functional for the first and second shaft, speed depends on operator and size of the package.

Format range: 680 mm, min. 126 mm Equipment: Longitudinal seam, folding bottom, double edge, electronic upper glue HHS, 4 channels with 2 application heads, disc gluing unit on the left, Bobst CUBE control, vibrator, pre-crusher right and left, Kicker, counters, digital position indicators, additional means transport up / down in the folding station, folding floor module, pneumatic, clocked press belt. Overhaul 2021: cleaned, tested, painted, new feeder and transport belts.

Glue application machine NEW MACHINE MH 6213 4 reels Working width: 1300 mm Double Burste

Block glue press Müro 5000/A2 WT; Working width 705mm; 3x dryer; Stack increase; heat deflector; Stand-standing device. Padding press Müro 5000/A2 WT; working width 705mm; 3x dryer; pile elevation; heating sheet; floor mounted machine.

POLYPRESS is suitable for the flexible production of straight and curved components made of glulam. Their special design allows adaptation to a wide variety of assignments and steppings in the shortest possible time. Batch size 1 can be produced rationally with this press.

Format range: 720 mm, min. 126 mm Equipment: Longitudinal seam, folding bottom, double edge, electronic upper glue with 2 application heads, disc glue on the left, Bobst CUBE control, vibrator & dental gauge on the feeder, Pre-crusher right and left, kicker, counter, digital position indicators, Folding floor module A2 with additional means transport above / below, additional means transport at the top / bottom of the fold, pneumatic Press belt. Overhaul 2022: cleaned, tested, painted, new Feeder and transport belts. Other: Machine can be visited by arrangement while running.

Format range: 450 mm, min. 55 mm Equipment: Longitudinal seam, disc glue on the left, Pre-breaker right and left, kicker, counter, vibrator on the jetty, digital position display, small nesting setup, clocked press belt. Overhaul 2022: cleaned, tested, painted and equipped with new feeder and transport belts.

Format range: 1150 mm, min. 86 mm Equipment: Longitudinal seam, folding floor, double edge, electronic upper glue unit with 2 application heads, Disc upper glue unit, disc glue unit on the left, Pre-crusher right and left, kicker, counter, medium transport in folding, clocked press belt. Overhaul 2022: cleaned, tested, painted and equipped with new Feeder and transport belts equipped.

PUR - Adhesive unit with integrated pre-melting tank for a permanent zero joint Symmetrical device, therefore can be used on both left- and right-hand machines Glue roller diameter 25 mm Greatly reduced maintenance and cleaning effort due to PTFE Coating of all assemblies (except glue roller) suitable for flexible production capacities Order in synchronization As a rule, it can be adapted to all common machine manufacturers: - on BRANDT machines - Olympic - Series by SCM - BIESSE AKRON - Series Application height up to 60 mm Low application quantities (