glue applicator used for sale

Intent Gluer Immediately Available

DOUBLE LANES CARTON ERECTING MACHINE Can mount the same box on two strips at the same time German servo motor system German Siemens and Schneider electrical system PLC touch screen Glueing system with motor control Capability to work in different ways with plate Gathering system at delivery unit can be adjusted and connected according to job Voltage: 380V/50Hz Covering area: 4.0 1.4M The total power: 8Kw Maximum production speed: 400pcs/min Air pressure: 0.6Mpa (Dry and clean compressed air) Materials: Paper board 200-600gsm; corrugated board paper with thickness not exceed 1.5mm Blank length(L): 100mm – 450mm Blank length(B): 100mm – 450mm Height of side flaps(H): 15mm – 260mm Height of side flaps+lid(HI): 50mm – 260mm Conicity: 5°-40°

105 X 145 cm Sheeter with heating Powder Dusting Dusting for heater Machine has suitable to cut any work even Poliester and PVC too. Tank for Puhr Glue High Speed Machine It can work from 70 gr till 900 gr It is well maintanenced It is very good condition Available immediately.

HERMES, SAIT, MIRKA, VSM Machines for the packaging of abrasive materials. 1. Press for wide belts 2. Press for narrow belts 3. Paper cutter (wide belts) 4. Canvas cutter (wide belts) 5. Guillotine for cutting wide strips to length 6. Guillotine for cutting narrow strips to length 7. Machine for cutting jumbo rolls into narrower rolls 8. Machine for cutting already glued wide strips into narrower ones (eg: 600 mm  4 x 150 mm) 9. Press for crushing waste 10. Dust extractor 11. Compressor 12. Machine for applying glue to the tape for joining canvases 13. Machine for gluing endless belts for power tools (blue). Cutting, milling, gluing, cutting papers and abrasive cloths from Jumborola. 1. Paper (jumbo) - 13,105 m (approx. 18,000 m2) 2. Canvas (jumbo) - 5,000 m (approx. 7,000 m2) 3. Canvas and paper rolls 150-300 mm - approx. 18,000 m2 and approx. 7,000 m2

Production of FKS Hamburg, Germany. Possibility of gluing books, brochures, blocks, prescriptions, etc. A very handy machine, perfect for a digital printing house. The machine has a comfortable base and a built-in compressor. Technical data: Max format: 320 ×310 mm Back thickness: 60 mm Capacity approx. 320 books / hour Weight: 186kg 230V power supply Material detection sensors Automatic cover detection and automatic cover clamp Back milling Simple operation via the LCD panel Adjustable clamping force of the cover Smooth regulation of the thickness of the applied glue Includes instruction manual, compressor.

Bag Making Machine Model: Smartmac 850 / S8-servo bag making machine (bag forming with a side seam, a hole-cut unreinforced and reinforced with glue reinforcement handles) Release Year: 2004 Country of manufacture: Turkey Condition: good working, machine in operation, any checks We will assist in the training of personnel and the implementation of the NDP.

This machine can produce PE, BOPP adhesive tapes, PET silicone tapes Coating units: - kissing rolls for BOPP adhesive tapes coating (film 25-45 um + acrylic glue 10-30 um) - Mayer bar for PE, BOPP adhesive tapes coating (film 20-100 um + acrylic glue 3-20 um) Technical data 1. Outline dimension（LXWXH）：40698×3720×5150mm 2. Effective width：1320mm 3. Rollers width：1450mm 4. Max mechanical speed： 220m/min 5. Max production speed： 200m/min 6. Max diameter：φ600mm 7. Max rewind diameter：φ600mm 8. Paper core size：3“（φ76） 9. Method of heating：hot oil 10. 9 units of ovens, 4m per unit, total 36m 11.Temperature control：max 120±4℃ 12. Rewind edge tolerance： ≤±2mm 13. Evenness degree： ≤±0.0015mm 14. Total power：95kw 15. Power supply：380V，50Hz ...

Nordson Pur Hotmelt Single Surface Flat Lamination Line Nordson Pur Hotmelt Tank 1300 mm It is a very little used, complete line suitable for all types of flat surface lamination. It was put up for sale due to project cancellation. -LINE FEATURES- -Plate-Plate product grouping and roll-shaped product lamination line. -25 meters / minute working speed -3 meters Product feeding conveyor - Motor-controlled surface dust suction brush -1300mm wide double chrome roller glue application unit. -PLC supported PID controlled heat and weight control with Turkish menu, -Sensor-controlled plate joining ramp to the glued surface and 3 meters speed-controlled belt conveyor. - Double row silicon & chrome roller press and brake control roller coil hanging unit. -3 meters of finished product output conveyor, -Nordson PUR Glue Tank + 3 meters hot glue hose + automatic glue filling gun Level ...

Complete automatic PET bottling line with capacity of 10.000 b/h, with 2 sets of tools for bottling 0,5L and 1,5L. PET LINE -Tikves Winery- Spec. Equipment Producer Type Year of prod. Capacit. 1 Preforms transporters M. TANNER 1999 15.000p/h 2 BLOW MOULD KRONES- CONTIFORM KBM8 1999 10.000b/h 3 Chiller for moulds KKT-Kraus KLC-s 38 N 1999 38KWhr 4 Air transporter KRONES- 1999 5 Unscrambler LANFRANCHI L1ST 1997 12.000b/h 6 OZONER for rinsing water BERTOLASO OM1002 1997 7 Monoblok Rinser+Filler+ capper RINSER BERTOLASO NV 1R 10 1997 10.000b/h FILLER ORTMAN+HERBST HANSA B B56/8Z-144 1997 10.000b/h CAPPER ZALKIN PCO 1997 10.000b/h 8 Bottles transporters KETTNER 1997 9 MIKSER ORTMAN+HERBST 1978--- 2005-Refurb. 15.000l/h 10 LASER PRINTER ALMARK 880 11 Labeller KRONES CANMATIC- WRAP AROUND 2002 10.000b/h 12 PVC Packer BAUMER 1997 12.000b/h 13 ...

Forming and filling doypacks with stopper. Features FM2 flow dispenser and stopper applicator. Functions: unwinding, forming, sealing, dating, cutting, opening, dispensing, closing.

PERFECT CONDITION Find below the technical information taken from the documentation (attached): Media specifications : Minimum label size: 20 x 20 mm Maximum label size: 180 x 300 mm Maximum label roll diameter: 350 mm Approx. 6,000 labels per roll (120 x 100 mm) Paper roll length: 600 m Core: 76 or 40 mm Ink ribbon length: 600 m Other features : Mounted on a frame in left or right hand version Stainless steel electronics cover Operating temperature: 0 °C to +40 °C Power supply: 220 V, 50 Hz, 3 A Total weight of ETI 3000® LR : 45 kg Options ETI 3000® LR : - Harting® industrial connector - Pre-alarm at the end of the label - Light and sound alarms - Label presence control and barcode reading - Delayed installation box - Fixed or adjustable stainless steel stand Printing features : Printing methods: thermal transfer or direct thermal direct ...

The Zetes MD4000 labelling system integrates seamlessly with existing production lines, even when space is limited. One single anodised base integrates the various components: • Print engine of all leading manufacturers • Can fit various applicator arms • Unwinder and clutchless rewinder • Various I/O’s for use with external systems Easy to use • Left and right handed positions for quick replacement of ribbons and labels • Intuitive interface for easy manipulation • Fast and easy look up Includes hoirizontal applicating arm Has been in use for 4 years but fully functional and carefully mantained.

Benhil universal semi-automatic cartoner Multipak 8501 In great condition Productivity pack / min (boxes) - 90 (1.7) Packing size, mm - 75 × 50 × 28 Build packages × rows × layers - 3 × 6 × 3 Filling principle - side loading P max, kW - 1 Voltage, V - 380 Siemens Simatic S7-300 controller Reconfiguration for a pack of 220 grams is possible The packaging machine is used to pack rectangular, square and cylindrical bags, as well as rectangular and round cups. Packages or cups fed along the conveyor are formed into a block that has the following parameters: • Rows × number of packages in a row × layers • Width × length × height The type of layout can differ significantly within the limits of the minimum and maximum dimensions of the block, while the possible number of words is from 1 to 10. Box material For folding boxes - corrugated ca ...

We have an industrial electric disolver for sale. Producer: Chemical Industry Machinery Factory Model: GFJ- 7.5 KW Motor: 7.5 kW, 380V / 50Hz Rotation speed: 0 ~ 1450rpm Inverter Working elements made of acid-resistant steel Electric lift shaft (2.5KW motor) Electric control cabinet The set includes two mixing plates (30cm and 35cm) The set includes a 1000l stainless steel container (ladle) with transport wheels and a drain valve Application: - emulsion paints - pigments - dyes - coatings - sleepers - PVC pastes - rubber - glues - binders - resin solutions - inorganic substances - fertilizers, etc.

2000 Folding machine width 76 cm 4 buckles 2 knives 1 side buckle 1 glue station stream delivery ASP66-2ME In production Available: 02/2024 Located: Germany

SPECIFICATIONS: Max. gluing height mm: 55 (polyurethane glue) Workpiece length min. mm: 250 Aggregates: Headjoints/Milling Cutters/Cutters Rounding unit/edge cutter Edge trimmer

Sumbel Präzicoat 500 banding machine; cleaned and tested; Working width 500mm; hot and cold glue; Speed adjustable. Gluing machine Sumbel Precision 500; cleaned and checked; working width 500mm; hot- and cold glue; adjustable in speed.

Key data: 3 mm, 50 mm, 4150 mm

I am selling a fully equipped edge banding machine BRANDT Ambition 1220, built in 2010: Configuration: Manually adjustable entrance stop Manually adjustable joint milling Edge Banding EVA Glue Manually adjustable material pressure zone Pneumatically adjustable cross-cut saws Radius milling top + bottom manually adjustable Round unit 1 motor manually adjustable Radius scraper R2 pneumatically shut-off Control panel Working height adjustable by servo motor Material height 8-50mm Edge material thickness 0.4-3mm Feed speed 10m/min. Overall length including feed plate 4150mm Total weight 1320kg Very good condition, fully functional!

Wohlenberg WB390 Master binder Perfect binding machine Age: 1993 Handfeed station Vibrating station I + II 18 clamps Milling and roughening station Hotmelt Spine and Side glueing with Premelter Gouzing Station Cover Feeder Delivery

Polygraph Wegra BD15 Casemaker machine Age: 1980 Hand-feeding cover station Automatic cardboard feeding Hot glue Automatic delivery with press station

Nice entry-level assortment: 16 milling heads and 6 grooving discs, etc. Some profile milling heads, radius milling cutters large, groove discs, adjustment groovers, rebate head, glue milling cutters, flattening cutters, swivel cutter heads, universal profile heads with various used profile knives and various thrust rings, as well as many new inserts All cutters for 30mm mandrels. Sale only complete as shown and only to traders, not to private individuals. In sturdy steel cabinet with four pull-outs. Dimensions approx. 600 x 800 x 1000mm, weight approx. 230kg Trolley board included The milling cutters can be viewed on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

-Year 2000 -Max paper size 66x106 cms. -Anti noise hoods -Six electronic motorized buckles + 2 electronic knives -High pile feeder, Vaculift, Vacubelt, DV Pump -MBO MPC Control , Panel with all remote controls of the sizes and knives -Z 6 MBO mobile knife -HHS C 1100 glue system with 12 sections to connect -One spray glue gun, perforators and tools -Petratto DP 46 press station and stacker -All rollers in perfect conditions -Lot of parts and accessories

Tünkers Liliput 800 banding machine; cleaned and tested; Working width 800mm; suitable for cold glue; Pressure section. Gluing machine Tünkers Liliput 800; cleaned and checked; working width 800mm; used for cold glue; pressing down unit.

The system was built for a very special drugstore product, for which the customer became insolvent after a short time. It consists of: - HASSIA-PILTZ FlexiBag BC 260 Double-lane, fully automatic, vertical flow-wrapping machine, for flat and tetrahedral bags, for heat-sealable films Bag width from 2x50mm to 2x80mm Trigger length 50 - 250mm Seam width cross: 2mm Seam width lengthwise: 5mm Packaging material roll: max. outer diameter 600mm, core diameter 76mm min. 80 cycles/min single or 2x80 cycles/min - Dosing scale - Rovema EE 54 folding carton erector for fully automatic erecting and gluing of boxes and trays from flat blanks made of solid or corrugated cardboard currently. Box dimensions L84 x W84 x H85mm Output power 25 boxes/min - Head flap capping station Takeover of the folding cartons and transport to the filling station, fixation under the filling station a ...

Used case packer / tray packer for open trays. Originally, 1 litre tetra packs were cartoned. Manufacturer: M.A.S. Automation AS Year of construction: 06/2006 Cardboard is pre-folded from flat blanks, filled and then folded around the product. Gluing by means of hot melt glue. Infinitely variable adjustment units Product infeed conveyor incomplete. max. 100 products/min Control cabinet: Rittal, V2A Pneumat. Festo Gluer Nordson Geared motors SEW Frame stainless steel Mech .+ electr. Standard parts: Branded 2 emergency stop switches, safety light barriers The facility can be visited in Bremen.

For sale: Nordson Style Glue Machine Nordson ProBlue 10 Hot Melt Unit

Equipment: Double-sided adhesive tape dispenser for folder-gluer is controlled by an existing electronic glue application control system. controlled, 24V valve, clamping over 30mm square, pneumatically driven cutting knife device.

Perfect Binder Horizon BQ-270 PUR B.J. 2004 - Spine gluing: PUR - Side gluing: Hotmelt The machine comes from the authorities and has been little used. Attention! The machine is defective - the hose with PUR glue has not been cleaned and disconnected; PUR has dried.

Overview  The labeler was manufactured in 2004 by the German manufacturer Gernep. The last service was carried out in October 2021. Various label combinations can be realized with this machine. Including the application of wet glue and self-adhesive labels in combination on the bottles. The machine is sold without label monitoring. The machine is expected to be in operation until the end of 2024 and can be inspected at any time. Technical details  Output: approx. 6,000 bottles/h   Formats: 250ml, 750ml, 1,000ml  Right-left machine  2 wet glue stations  3 self-adhesive stations  12 bottle plates  Automatic machine. Lubrication  Bottle alignment unit 

PackLab WING REPC FWB60 self-adhesive labelling machine for front & back labelling for cylindrical, oval or rectangular shaped bottles, etc., 2 label applicator type M60 DX 250, label speed 60 m/min., outer diameter of the label reel max. 400 mm, core diameter of the label reel 45-75 mm, label carrier tape with a maximun height of 250 mm, label width from 15 up to 480 mm, maximum label height approx. 245 mm, conveyor width 80 mm, top stabelising belt, press-on belt with a height of approx. 110 mm, electrics 400V/50Hz/3PH, machine floor space approx. 4140 x 3000 mm (LxW), machine height approx. 1900 mm, machine net weight approx. 950 kg

16 station Gathering machine, handfeeding station, Criss-cross delivery, Spiral raceway, Main milling station, Spine preparation unit, Spine and side glue unit, Cover feeder, Single nipping station, Laydown delivery unit onto conveyor system

Fasson gluer type SFAM 716 with display mounting station Suitable for full, façade, edge or strip gluing. A high gluing and repetition accuracy of the gluing is guaranteed. Suitable for different substrates - such as open formats, die-cut blanks, etc. made of corrugated and solid cardboard, rigid foam boards, etc. • Sheet system by means of drive chains, also for complicated cuts • High register accuracy • Working width: 2,050mm • Output: 1-lane approx. 4-20 cuts/min; 2-lane approx. 8-40 cuts/min • Cutting thickness: approx. 0.5 to 20mm • Sheet control • Easy adjustment and correction of the register via the display, even during production Consists of: Fasson—Banding machine type SFAM 716 Display Workbelt Type 5A/1650 PRESS BELT Type 5/1650_D.4 Assembly station

Kolbus Perfect Binding Line, Equipped With: Gathering Machine: Kolbus ZU 805 Gathering Machine, AGE: 2016, Basic Frame with 16 Gathering Stations, Gathering For Folded Sections And Single Sheets Possible, Mechanical And Electrical De-Coupling Of Each Station Possible, Air Center Vacuum And Compressed Air Supply For Gatherer, Reject Unit AS Raceway/Transfer, Integrated Jogging Station, Transfer Channel As Connecting Unit To The Binder, Perfect Binder: Kolbus KM 600, AGE: 2016, 21 Clamps With Co-Pilot Touchscreen, TFT Visualizing Monitors With Graphic Operator Guidance, Milling/Brushing, Equalizing Milling, Notching And Brushing Units, Kolbus LH370 EVA Hot-Melt Pre-Melt Unit, EVA Hot-Melt Roller Type Spine Gluing Unit On Mobile Base, PUR Spine Glue With Nordson Pre-Melter, EVA Hot-Melt Side Glue Unit With Controlled Cut-Off, I.R. Heating In Radius For Increased Glue Open Time, RA 49.A Pile ...

Obel Pedersen type T30L high-frequency press for quickly gluing wood using high-frequency technology. The glue will The moisture is quickly removed and thus ensures a short pressing time. Including automatic Loading unit and scissor lift table in the outlet., glue: Dispersion glue (white glue), phenol resocin glue, urea glue and melamine glue, pressure: 42 tonnes, Included: new band, Further technical data: On demand

Labelling Machine SIDEL Flexible SL90 F85 Cold Glue / Self-Adhesive This SIDEL SL90 labelling machine has three roll feed labelling modules for the application of adhesive (pressure sensitive PSL) labels and three pre-cut cold-glue paper labelling stations both designed for round glass bottles 275 – 660 ml. Operation is anticlockwise. Machine has been operated from 2012 to 2020 when it was dismantled and placed in a warehouse. The labelling machine SL90 operates in continuous mode and automatically adjusts the flow of incoming and outgoing containers. It is also equipped with a camera vision system which is installed in the initial section of the central carousel to detect and identify the containers. It also ensures correct application of the labels on even more complex formats. This system is ideal with containers made of glass, PET and other transparent materials. The con ...

Used carton machine by Stork Bepak b. v. Bottling & Packaging System: Utrecht Netherlands type S.A.-25. New 1998. Can form corrugated cardboard boxes in a wide range of dimensions. During transport from section B to section C, an applicator (from Nordson USA) of hotmelt glue (granules or flakes) applies heated hotmelt glue under high pressure in strip form to the vertical dan tabs of the carton. Capacity: 25 cartons/min. Installed power: 8 kW.

Wet Aseptic Filling Line Krones PET 18000 bph Excellent condition Krones Dry Aseptic PET line for non-carbonated demanding products like smoothies, juices and dairy products without CO2. The line was commissioned in year 2018 by Krones and having only less than 12000 total operating hours. This line was purchased by current owner for contract filling so called Innocent Smoothies in 250ml, 360ml and 750 ml PET bottles with D38ml neck format. It has large GEA made aseptic processing plant for product treatment before filling. Blow moulder is Krones Contiform 310 PRO with 10 cavities, Contipure D preform disinfection system and for energy savings there is an infrared linear oven with ceramic reflectors and Air Wizard Plus pressurizer air recycling system. Filling and capping is made with Krones PET-Asept Bloc D, which has a wet aseptic system. Bloc contains aseptic bottle sterilizer STE ...

Labelling Machine GERNEP Labetta 7500 bph Fully automatic cold glue labelling machine for glass bottles and jars from the first owner, machine made by German Gernep in 2013 and having only 9512 operating hours as a labeller. This labeller has three cold glue label magazines for pre-cut paper labels (neck, front and back, now preserved in storage and a part of delivery scope). It covers all traditional equipment requirements of containers made from glass and PET. The combination of well-tried technologies such as stainless steel glue roller, rubberised and adjustable glue palettes, divided glue scraper knife with glue-saving fine adjustment of the glue thickness, overlay gearbox for exact label positioning. Labeller has been maintained well and last full overhaul (EUR 19’500) was made in the end of 2019. All air driven glue pumps are changed to electric drive pumps and it has stainles ...

Labelling Machine for glass bottles Krones Robusta 10000 bph Good condition, mechanical labelling machine for pre-cut paper labels with cold clue. It has two label stations, one with two label feeding trays and another with one feeding tray for front, back and neck labels. The carousel is rotated with variator driven electric motor and bottle tables have a belt drive. The labeller was built in year 1995, profoundly overhauled in 2016 and operated since overhaul only approx. 100 hours and thus in very good condition. Delivery includes labeller and approx. 1.5 meter in feeding and out feeding belt conveyors Technical characteristics Manufacturer: Krones AG Machine type: Robusta 600-10-4-4-180 Capacity: 10’000 bph Label type: Pre-cut paper with cold glue Number of bottle tables: 10 Number of labelling stations: 2 Labels on glass bottles: front, back and neck Manufac ...

Tried-and-tested veneer spacing machine, veneer sewing machine from Kuper FW/M 630 T Projection 630mm Power supply 230V Shifting via foot pedal 1 spool of glue thread Threader Release The machine is set. You can get started right away. CE Mark Operating instructions The machine can be demonstrated by appointment at our site. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

RACUPACK CATAMARAN WRAPAROUND CASEPACKER BOX PACKING YEAR 1999 Machine for rebuilding or for parts. Year: 1999 Serial No. 499155 Glue Unit: Nordson 3100V-2EAT4D/ JR4 PLC: Siemens S7 Inverters: Hitachi Machine Dimensions: 3750 x 3050 x 2420 Electrical Supply: 220/380V ac 50Hz, 8kW

Equipment: -Chassis - Quick-heating glue container - Support plate for rolls - Roll capping - Cross-cut saw - Flush milling Radius/Straight/Chamfer - Suction nozzle Ø 100 mm Specifications: Power ratings: 400 V, 50 Hz, 13.3 A, 7 kW max. edge thickness 5 mm max. workpiece height 40 mm min. workpiece length 300 mm Feed speed 11 m/min Ready for use in approx. 4.5 min Work table height 900 mm Dimensions: 3,300 x 1,400 x 1,300 mm Weight approx. 550 kg All information is subject to change of the actual equipment

USED TETRA PAK TBA 19 250ML SLIM COMPLETE FILLING LINE FOR SALE Item #: Usm-188 Category Tetra Pak TBA 19 1-TBA 19 250ml Slim Filling Machine, Year of manufactitng 1999, Version 10v, Speed 7500 PPH 2-Tetra Pak Straw Applicator TSA 46, Year of manufacturing 1997 3-Tetra Pak Cardboard Packer TCBP 70 4-Tetra Easy Ride 5-Conveyors and Paper trolly Condition: Still on production and Tetra pak maintained.

USED TETRA PAK TBA 19 200ML SLIM COMPLETE FILLING LINE FOR SALE Item #: Usm-189 Category Tetra Pak TBA 19 Used Tetra Pak TBA 19 200ml Slim Filling Machine, Version 10v, Year of manufacturing 1998, Speed 7500 PPH Tetra Pak Straw Applicator, TSA 21 Tetra Pak Packer, TCBP 70 Conveyors and Paper Trolly Condition: Good

PreviousNext BRAND NEW GABLE TOP FILLING LINE FOR SALE Item #: Usm-195 Category Gable Top Machines Brand New Gable Top Filling Machine, Speed 3000 Pack Per Hour, Filling Volumes 200ml to 1000ml, Year of manufacturing 2023, Pack Type B 70x70, Cold and Hot both Filling Possible, UV Sterile System and Hydrogen Per Oxide Sterile and Alcholic Sterile. Suitable for Milk, juices, Cream and yogurt, Expiry Date Hot Stamping also instaled, Cap feeder, Lifter and Cap Applicator Also installed. Cap Applicator Made by Branson USA. Air Compressor also included, PLC Brand Inovance

Key data: 2 mm, 50 mm

Edge banding machine Edge banding machine OTT Type: 20S Edge banding with hot melt glue glue basin Plastic edges up to 2 mm Solid wood edging up to 20 mm Flush milling units at the top and bottom Profile milling units at the top and bottom Edge grinding unit rollable The machine originates from the age-related abandonment of a small construction and cabinetmaking workshop and is available now. Dismantling and loading can be organized by us. Settlement by appointment. Buyers can also pick up and test the machine themselves on site. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping c ...

Year of construction 1997/1999 Format: max 510 x 310 x 60 mm; min 140 x 100 x 3 mm Book block thickness: max 60 mm; min 3 mm Envelope size: max 642 mm; min 203 mm Capacity: max 12,000 c/h Equipment Gathering machine • 18 stations • Investor 3691 • Diverter 3614 Controls • Double and faulty sheet control • ASAC automatic self-adjusting caliper Intermediate building blocks • Set-up element • 3 vibrating element • coupled with Bookbinding • Milling and roughening station • Hotmelt backing glue • Hotmelt side gluing unit • 2 Premelters • SF Shed Envelope Feeder • SF envelope pressing • Plate chain depositing tape Cooling section • approx. 30 m • inline with Three-knife trimmers • Three-knife trimmer MM Zenith 3672 Stacker • Muller Martini compensating stacker Standards • Standard accessories •Operat ...

Used Labeler Krones ROBUSTA She labeled 0 33 L beer glass bottles Capacity up to 10 000 bph Paper labels front back and neck with cold glue Complete overhaul performed in 2016 She has only worked 100 hours since then so she s like new It s great connected in operation and can be tried [...for more information send your inquiry to the seller.] refno: ET132

USED TETRA PAK A3 FLEX 1000ML PRISMA FILLING LINE FOR SALE Item #: Usm-193 Category Tetra Pak A3 CF/Flex A3 Flex 250ml Slim and 1000ml Prisma Filling Line For Sale A3 Flex 250ml Slim filling machine with 1000ml Prisma Volume change kit, Version 100v, Speed 7000 PPH Straw applicator TSA 21 Cap applicator 45 for stream cap Tetra Pak packer TCBP 70 Tetra Film wrapper 67 eady ride and conveyors paper trolly Condition: Good

JM 91 | BOX FORMING MACHINE TMG Year: 2018 Speed: 5.000 bph Gluer | glue closure from below Safety protections Case packer tmg Year: 2018 Speed: 5.000 bph Safety protections Box closing machine tmg Year: 2018 Speed: 5.000 bph Gluer | glue closure from below Safety protections