glue applicator used for sale

Model: KRONES Solomatic Type: K018-xx1 model: 1200-25-480-6-5-160 Year of construction: 2003 Capacity: 36,000 to 40,000 fl./h Running direction: Left machine Feeding: Linear, straight Unit: fuselage PWL300, back PWL300 Glue roller: Steel glue roller Guide: 1x inlet star, 1x outlet star Label-L=: min. 40mm, max. 160mm Bottle-D=: min. 50mm, max. 125mm Voltage: 220/380 V Tags: Torso, Chest, Back Machine dimensions : 2.80 x 2.85 meters. The dimensions refer to the base frame without procors of the units and spout extension, as well as electrical cabinet (80x40x240cm). Price ex location: "As Is" Condition please inquire Price ex location: in refurbished condition on request.

angle steel/side length: 40 x 40 x 5 mm U-iron on the x-axis: 50 x 25 x 5 mm roll diameter: 98 - 148 mm speeds of rolls: 20 U/min Speed Speed applicator roll: 5 U/min diameter of roll spindle taper: 30 mm total power requirement: 1,1 kW weight of the machine ca.: 220 kg dimensions of the machine ca.: 1000 x 620 x 1400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tetra Pak A3 Flex 1500ml Gemina TGA Filling Line For Sale Item #: Usm-141 Category Tetra Pak A3 CF/Flex Tetra Pak A3 Flex 1500ml Gemina Filling Line For Sale Filling machine Tetra Pak A3/Flex TGA1500Sq, in set with accessories, and Headspace by Injection kit, Year of manufacturing 2009 & Working hours 2427 Cap Applicator CAP 30/Flex, with HeliCap27 kit, Year of manufacturing 2008 & working hours 2631 Accumulation system ACHX-0400, Year of manufacturing 2008 & working hours 2404 Cardboard Packer TCBP70, Year of manufacturing 2003 & Working hours 8654 Set of conveyors TPC23 (35 meters with 3 drives) and spare parts for connection of components of the filling line, with dry lubrication system Line Controller LC 30, Year of manufacturing 2008 Condition: The line is currently in Production, Technical inspection can be arranged on request.Overall conditions of Equipment: Good.

Panel thickness: 12 - 60 mm Feed speed: 18 m/min Edge thickness: 0,3 - 3 mm for coil edges Equipment: Programmable fence at the infeed Squaring device: 2 x 3,0 KW Glue application unit: A34 double edge magazine for 2 coils Lateral pressure rollers, thickness programmable, 1 driven, 2 non-driven rollers End trims HL84/85, programmable change straight/chamfer, 2 motors 0,18 kW Rough trimming: 2 x 0,55 KW Contour trimming FK 13, 2 x 0,55 KW Profile scrapers PN10 Flat scrapers Buffing unit Controlls: HOMATIC NC21

Single sided postforming line, capable of doing L - and U profiles, with or without insert. Workpiece thickness: 16 to 60 mm. Min. workpiece width: 150 mm. Workpiece overhang: 70 mm. Max. laminate overhang: 105 mm. Feed speed 3 - 18 m/min. Fence side at the left Equipment: Squaring and shaping part: 1 x Postforming squaring unit, 2 motors each 1kW, 1st motor removing the laminate, 2nd motor trimming the overhaning laminate 1 x scoring, motor 1 kW, top position 1 x milling unit for the laminate when doing U profiles 1 x laminate support Postforming part 1 x blow cleaning nozzle 6 x glue nozzle for the glue application 2 x glue roller 9 x IR heating, each 2,2 kW 2 x Hot air blower, each 10 kW 1 x Basic postforming pressure zone for L-profiles, using rollers 1 x Basic postforming pressure zone for U-profiles, using rollers 1 x VF postforming pressure zone for special profiles, using pressur ...

1 aseptic Elopak filling machine line No E 5 suitable for ESL milk, UHT milk and fruit and Vegetable juice bottling. set at the moment for 3 formats Int. No.B 5, Series No. 453 Manufacturer: SHIKOKU-KAKOKI LTD Type: U-680A Year of construction 2007 with 3-lane run-off section Capacity 10,500 U/h Conveyor belts for individual packaging are manufactured by Polyketting BV Series No. 121614; Year of construction 2013 3 Elopak screw cap gluers a.) Type: PLA-S30 Manufacturer Elopak Inc. Year of construction 2005 Ref. 22111 b.) Type: PLA-S30 Manufacturer Elopak Inc. Year of construction 2007 Ref. 22121 c.) Type: PLA-S30 Manufacturer Elopak Inc. Year of construction 2007 Ref. 22122 d.) Individual packaging connection transport system from the Elopak filling machine to the 3 screw caps Gluing machines and on to the inle ...

Manufacturer ARPAC Line date: 2018 new, original packed Product description: Plastic Jar, 35 jars (bottles) / Minute (per line) Packaging description: RSC Cases (regular slotted case) , tape sealed System description: PART ARPACK ARPAC developed an integrated solution for this end line packaging system. Product is received single lane, diameter-to-diameter, into an automatic cartoning machine. Cartons are pushed into the required case pack configuration by a pneumatic row pusher. Product is collated, packed into a case, and manually palletized. Labellers: Jars (bottles) arrive filled, sealed, and are already labelled One Jars are placed inside a carton, the flaps are sealed with glue and a printed label with date/lot code is applied. Once cartons are placed in case, the flaps are sealed with tape and a printed label with date/lot code is applied. Features: - (3) Print an ...

Type: W/ARW 2200/12 Flying Splice Comm. 2011-001.1 Working width: 2200 mm Finished roll weight max. 2000 kg Finished roll diameter max. 2x 1200 mm Finished roll width min. 800 mm; max. 2200 mm Material Paper/ Foils 75 μm – 1000 μm Machine speed max. 1500 m/min Depending on the type of material and material thickness achievable Web tension: max. 1000 N Finished roll sleeves: inside 152.4 mm outside 162.4 mm - Type of cardboard sleeve, plastic - Sleeve tolerance according to DIN 6748 or 55470 Unwinding: Type ARW 2200/12 Unwinding: axisless 2 x 1200 mm; sleeve holder 6" L.W. (other dimensions with additional accessories possible) Sleeve holder: 6" L.W. (other dimensions with additional accessories possible) Pulleys: DM approx. 150 mm Brake: Generator brake with energy recirculation, control via ultrasonic sensor Path control: Edge control E&L with ultrasonic sens ...

Tetra Pak TPA 19 200ml Prisma Filling Line For Sale Item #: Usm-148 Category Tetra Pak TBA 19 One Used TPA 19 200ml Prisma Filling Line For Sale TPA 19 200ml Prisma Filling Machine, Working hours only 5300 Straw Applicator TSA 21, Year of manufacturing 2004 Packer TCBP 70, Year of manufacturing 1999 Conveyors & Paper Trolly Condition: Complete line & in excellent condition.

Line date: 2018 new, original packed Product description: Plastic Jar, 35 jars (bottles) / Minute (per line) Packaging description: RSC Cases (regular slotted case) , tape sealed System description: ARPAC ARPAC developed an integrated solution for this end line packaging system. Product is received single lane, diameter-to-diameter, into an automatic cartoning machine. Cartons are pushed into the required case pack configuration by a pneumatic row pusher. Product is collated, packed into a case, and manually palletized. Labellers: Jars (bottles) arrive filled, sealed, and are already labelled One Jars are placed inside a carton, the flaps are sealed with glue and a printed label with date/lot code is applied. Once cartons are placed in case, the flaps are sealed with tape and a printed label with date/lot code is applied. Features: - (3) Print and Apply Bar Co ...

- Granite top T/W/H: 750/ 500/ 20.5 mm - Aluminium plate B/D/H: 750/ 500/ 40 mm - Space requirement (W x D x H): 0.75 x 0.5 x 0.805 m - Machine weight: 370 kg - Condition: very good Details Measuring table or laboratory table with a granite plate and an aluminium plate with base frame glued to it, aluminium plate with threaded holes M8, hole spacing 50 mm

Filling is established with a 2¨flow meter - FLOW 33 accuracy 0,5% 1.2 The machine is built with ΙΝΟΧ ASI304 1.3 The machine will come with a full closed cabin for hygiene 1.4 Closure of bucket with film per kg & UV lamp 1.5 Automatic conveying per kg 1.6 Automatic over cap Applicator for 2,5 & 5 kg 1.7 System for CIP connection 1.8 Control panel with touchscreen Siemens IP65 and PLC Siemens, immediate choose of kg .The change over is immediate and needs no handling 1.9 Capacity 4,5t/hour on 5kg 1.10 ΗΕΡΑ filter in cabin 1.11 Stainless steel lobe pump OMAC Type : ΒΕ 220 Machine dimensions: Length : 5 meters Width : 1 meter Height : 230 meters

Make Jori machine Model JBT50/4D Year 2018 Speed up to 1.800 cycli per hour Book thickness 3-50 mm Min book size 160 x 120 mm Max book size 450 x 300 mm Cover material 80 - 300 gram Block preperation Milling station with dust extraction Glue system Hot melt glue with 2 application rollers and side glue Cover feeder Automatic airfeed with nipping Foot print 3500 x 1520 mm

Gluing machine Sumbel Coronel 120; good condition; cleaned and tested; Working width 120mm; 2-roller system; Glue basin height-adjustable; suitable for cold glue. Gluing machine Sumbel Coronel 120; good condition; cleaned and checked; working width 120mm; two roller system; glue reservoir adjustable in hight; used for cold glue.

Kuper Veneer Zigzag Veneer Composition Machine, Type FW/ 1200-E Year of manufacture 1995 S/N 3508 3179 Special features of the KUPER FW 1200 E: high feed speed of 60 m/min. electronically infinitely adjustable zigzag width of the glue thread cutting device veneer thickness : 3.0 mm min. veneer thickness : 0.3 mm Glued thread with hot air heating Compressed air generation Discus for transporting the veneer over the veneer table Control via foot pedal Feed Speed: 35-60m/min Voltage: 400 V, 50 Hz Total power 1.35 kW Working height 915mm Bzunfcilke Weight approx. : 440 kg Dimensions : 2,12m x 0,73m x 1,55m

Overview of the assembly: - Release agent spray unit top & bottom - Joining milling unit 2 x 4 kW - Glued part with workpiece preheating, 2 rolls, pressure zone C and QA34 application unit for PU with quick clamping system - autom. Adjustment pressure zone - Preparation for Lasertec activation unit - Hl84 cross-cut unit 0.8 KW - pneum. Adjustment pre-milling unit - Pre-milling unit Bf10 1.5 kW - Mould milling unit Fk11 Manual - Autom. Adjustment of chamfer to radius milling machines - Rolling side probe FK - Pneumatic adjustment FA11 for lateral displacement from the working area - Multi-drawing blade MN 21 autom. for a maximum of 5 different profiles. - Finishing unit (glue joint drawing blade and swabbing ridge) - Detergent spray unit top & bottom - powerControl PC22 Workpiece and edge parameters: - Workpiece width without edge min: - For workpiece thickness  ...

Twinpack MDE automatic handle applicator on shrinked packs Manufacturing year 2010 Capacity 50 packs per minute Set for several packs & bottles sizes Equipped with Siemens S7 drive CE control panel Machine in very good condition Available immediately

Panel thickness: 8 - 50 mm Thickness of the edges: 0,4- 3 mm Feed speed 8 - 11 m / min PU pressure rollers Equipment: Non-stick spray system Squaring unit, 2 motors 2,2 kW Panel edge heating Edge magazine for coil and strips Hot melt application with roller Airtec AT4510 unit The Airtec aggregate is positioned so you can use Airtec or the standard glue pot Motorized side pressure unit End trims, 2 motors, pneumatic positioning straight and with chamfer trimming unit above / below Contour trimming unit Profile scraping unit Glue scraping unit Polishing unit Detergent spray system central lubrication Powertouch control

Edge banding machine Sumbel Perkeo 60; good condition; cleaned and tested; Working width 60mm; 1 roller; suitable for cold glue. Edge gluing machine Sumbel Perkeo 60; good condition; cleaned and checked; working width 60mm; one roller; used for cold glue.

Fixed side at the left Panel thickness min/max: 16/45 mm Min. panel width: 150 mm Lateral panel support for panel width up to 900 mm Min/max. panel length: 700 / 3100 mm Max. laminate overhang: 110 mm Max. laminate thickness: 0,8 mm Radius min/max: 6 / 22 mm (depends the laminate) Feedspeed max. 18 m/min Top pressure by belt Equipment: Infeed fence, adjustable, defines the panel overhang 2 x trimming unit 0,4 kW, HSK 25 toolholder 1 x PVAc glue application 5 x glue nozzle, adjustable 1 x hot air blower 3 x IR heating on top (55 cm length), 3 x bottom (90 cm length) Postforming zone 1,8 m. length Various pre-installed profiling sets 1 x top trimmer 0,4 kW

Tetra Pak Cap Flex 30 For Heli Cap 27 For Sale Item #: Usm-153 Category Cap Applicator Tetra Pak Cap Flex 30 For Heli Cap 27 application is for sale. Year of manufacturing 2012 and Still on production.

Folder Gluer (folding carton gluer)

Folder Gluer (folding carton gluer)

Equipment: - Quickmelt gluing part for hot melt adhesive - Automatic edge magazine for rolls and fixed lengths - Heavy pressure zone with driven, pneumatically applied main pressure roller and 2 free-running repressure rollers. (adjustable by program) - motor-adjustable upper pressure. - Control panel on the machine inlet. - Electronic control power control PC 20+ - Feed variable 8-14 m/min - PU overpressure rollers - Inlet ruler adjustable by program - Joining milling unit 2 x 2.2 kW - Bevel cross-cut unit/straight 2 x 0.18 kW - Milling unit 2x0.55 kW (adjustable by program) with multiple roller pressing - Mould milling unit top+bottom, 2 x 0.35 kW - Drawing blade with quick-change heads and additional device for pointed workpieces - Glue joint drawing blade - Schwabbelaggregat - Automation package for 1-milling machines, consisting of: 3175 - Pneumatic Adjustment Caps ...

Manufacturer: Bielomatik Model: 368 year: 1994 8 stations Paper size (cm): 100 to 400 Multiflex, Crimping Snap-out delivery 2 5/6" to 121/2 Indentation cylinder 24" x 100mm Cold glue with 7 nozzles intermittently programmable 2 Numbering possible on a form Price: on request

Technical data turn table wrapping line with top sheet despenser for fully automatic, watertight packaging of palletised goods Manufacturer UNITECH S.r.l., Via Buscaglia, 10 - 27029 VIGEVANO, Italia Typ UNIWRAP 200 AE Year of construction 2007 Throughput capacity approx. 30 pallets per hour Connected load 7,5 kW Weight 3,700 kg Stretch films, roll diameter 300 mm Roll height 500 up to 750 mm Core diameter 76 mm Film thickness 15 to 35 micron Roll weight 25 kg Top cover PE film, roll diameter 250 mm Core diameter 76 mm PE film roll width max. 1,700 mm PE film thickness 60 to 100 micron PLC Siemens Simatic S7-200 PLC panel Siemens OP 77A Installation dimensions Wrappinmg unit 3,400 x 3,100 x 3,900 mm (l x w x h) Dimensions roller conveyor 10,000 x 1,150 x 570 mm (l x w x h) Descreption: The Uniwrap 200 AE is a robust build stretch wrapping machine made of high quality components delivering ...

Used labeling machine, sleeve applicator with a shrink tunnel made by Clever Machines, model GS 321. New in 2005.

A glass bottle fruit juice hot filling line with bottles cooling tunnel Capacity: 5,000 units (1.0 and 0.75l), built between 1994 and 2014 Box line, equipped with K 1; Dirt box task on transport system, done manually K2; Bottles lid screwdriving system from Fa. Elektro Maschinenbau Rink GmbH, Type: KM 740/7K , Fabr. No 07/1813/93 Year of construction 1993 4 boxes of 6 bottles each are made at the same time the lids autom. unscrewed and put into a Containers disposed of. K3; Kettner bottle unpacking line Comm. No. 93/0604/083, Type: R09 JUN 9, Year of construction 1993 12 tulips per row x 3 are simultaneously lifted out of the box and onto a bottle tasktable with 15 V2A chain belts. K4; Box washing and turning system Enema at the bottom, outlet of the box at the top Manufacturer Fa.. Klotzki Maschinenbau, Type: Reversible wheel washer, year ...

Technical data (subject to change): Machine: Constant workpiece output from the chain path: 38 mm (incl. edge at edge thicknesses 0.3 - 3 mm) min. throughput width: 65 mm with a maximum workpiece thickness of 25 mm min. workpiece length in feed direction: 150 mm Basic height (upper edge chain track): 960 mm Workpiece: min. workpiece length: 150 mm min. workpiece width: 65 mm min. workpiece thickness: 8 mm workpiece thickness: 40 mm (with copy function) workpiece thickness: 60 mm (without copy function) Smallest workpiece: 150 mm x 150 mm, or 65 mm x 300 mm Lateral protruding coating material: 0 mm Edge material: paper, plastic and veneer min. height: 14 mm height: 65 mm Roll material: min. thickness 0.3 mm thickness 3.0 mm Veneer edges limited possible up to 1.0 mm cross-section 130 mm² min edge length 160 mm upper edge protrusion: 5 mm Equipment: - Drive fo ...

This line is an automatic filling line for bottles with Ø 38 mm wide mouth neck including aseptic filler, filling height control unit, labeling, foil shrinking, handle applicator and conveyor system used in the PET bottling for still and cold products like milk or juice.

60″ x .135″ x 20,000Lb Cincinnati – Forte Loop Slitting Line Material Width: 12″ – 60″ , Thickness: .010″ – .135″, Weight: 20,000Lb, Coil ID: 16″ – 24″, Coil OD: 72″, Speed: 600 fpm, Direction: Left to Right. Entry Turnstile, Entry L-Type Coil Car, Mandrel Uncoiler with Hold-Down Roll, Powered Peeler, Driven Pinch Rolls, PVC Applicator, Entry Shear, Two Slitting Heads, Injection Design, 5″ & 7″ Arbor Diameter, 75HP DC Motor, Two (2) Hydraulic Scrap Winders, Pit Cross Over Table, Drag Board & Rotary Tension Stand, Recoiler with Over-Arm Separator & Push-Off, 150HP DC Motor, Exit L-Type Coil Car & Turnstile. Electrics, Hydraulics, Controls, Tooling, Spare Parts

Hydr. Glueing machine make JOOS type HPS 20 SMachine -No: 68/3576 built in 1969Table size: 1000 x 1000 mmInstallation height (height of the press room): 1000 mmPressure gauge: 630 barOperating pressure: 300 barPiston diameter: 65 mmNumber of cylinders: 2Stroke: 400 mmDrive power: 1.5 hpDimensions: 1700 x 1100 x 2400 mmWith- Timer- extendable table- Cylinder movement from below- Emergency stop switchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

properties Used belt conveyor Color: Orange, Stainless Steel Incl. SEW engine Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional 1 pcs. in stock specifications: Dimensions of the belt conveyor Manufacturer: Schulz Total length: 9,200 mm Total width incl. motor: 640 mm Total width without motor: 420 mm Frame Height: 50mm Steel frame Side guide: 30mm high Information about the belt Belt width: 400 mm Strap Type: Smooth Belt must be glued on site. Belt conveyors The webbing is ideal in the picking zone to interlock machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the feeding or delivery point and also serves, for example, as a connecting section in fro ...

Edge banding machine Brandt Optimat KDF 1600 GC YOC 2009 Edge thickness 0.4 - 12 mm Plate thickness 8 - 60 mm Feed 12 m/min Inlet ruler adjustable Pneumatic package Automation package Quickmelt Premelting Unit Joining milling unit 2 x 2.2 kW Cross-cut unit chamfer / Straight 2 x 0.35 kW Milling unit 2 x 0.55 kW Mould milling unit 2 x 0.35 kW (2 units) Drawing blade unit with quick-change heads Surface drawing blade for glue joint Schwabbelaggregat 2 x 0,18 kW Electronics control Connection value 11.5 kW Machine length approx. 6600 mm Weight 2900 kg

SAVOYE INTELIS packaging machine was built in 2016 in France. The machine is used for example in halls or warehouses, for the fully automatic packing of carton shipping boxes made of corrugated cardboard. All of the devices included in the packaging line are independent and built on the plug and play” concept, which allows easy relocation and installation. The SAVOYE INTELIS packaging line consists of the following devices: – case erecting machine: INTELIS F12 – shrink tunnel: INTELIS T18 – box lid placing machine: INTELIS C12 – glue dispenser: NORDSON PROBLUE The packaging machine is equipped with intelligent conveyors which adjust to the load of the packages and the intensity of work, making the whole packing process smoother. The motors built directly into the rollers operate 100% electrically and thanks to their design and technology used, they save a considerable ...

#5304 Horizon BQ-140 Age: 1998 Available: August 2022 Location: Germany Max Binding Width: 400 mm / 15.7" Binding Thickness: 1 – 30 mm / 0.04 – 1.18" Cover Dimensions: 400 x 620 mm / 15.7" x 24.4" Min. Cover Dimensions: 100 x 200 mm / 3.9" x 7.9" Cover Stock Thickness: up to 0.5 mm / 0.02" Cycle Spped: up to 25 cy/h Hot melt Glue (H-110)

Equipment: - Machine stand throughout - Fixed stop side right - Paint finish Grey RDS 240 80 05 - Inlet ruler motorically adjustable, extended by 300 mm - Inlet lock pneumatically controlled - automatic edge feeder - Upper pressure: belt upper pressure - Height adjustment motorized - Position display and input centrally via the controller - Transport chain with rubber support, 80 mm wide - automatic central lubrication for the transport chain - Workpiece support in scissor design, approx. 1000 mm extendable - Noise protection equipment - Hood interior lighting 3 lamps - Control Power Control PC20+ Aggregate technology: - Joining milling unit 2 x 2.2 kW 200 Hz (60 mm joining milling cutter set) - Gluing unit A15 (workpiece preheating, QA34 application unit, infrared adhesive activation, magazine for rolls and fixed lengths, pressure zone with motorized adjustment, driv ...

Width 500 mm Options for PVA glue

Width 800 mm Glues cold PVA glue Details machine modified to topgluing machine

Veneer gluer Kuper Stand unloading 630mm Feed approx. 7m/min Drive electric motor 25Watt, 190Volt Connection voltage 220Volt

installation consisting of the following components: - glue station for 2-component glue - Input table with motorized rollers and 90 ? rotation - Composition table and loading in the press - Press model FAST / 130 - Horizontal pressure installation mounted on adjusted beam - Outfeed roller conveyor, not motorised technical data: dimensions of strips: length: 900 to 8,000 mm width: 20 to 45 mm height: 50 to 200 mm plates to be produced: length 8000 mm, 2 x 4000 mm, 4 x 2000 mm or 4 x 900 mm Bonding press: Dimensions: 1300 x 8500 mm press opening: 250 mm. Total pressure: approx. 200 tons 12 x overhead hydraulic pressure cylinders 2 rows of cylinders can be switched off 17 x lateral cylinders, individually switchable horizontal pressure 7 kg / cm? Attached electric boiler for thermal oil

Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...

Width 500 mm Options with board attachment up to 8 mm, for PVA glue Available Direct

Edge banding machine Brandt type KTD Specifications: • Glue pot • Conversion: carried out by the company Hüttenhölscher in Verl • Field of application: Adhesive application system for handle strips • Vacuum table: included • Automatic pressure zone: included

with milling machine, side gluing and transshipment station RIGO perfect binders for small and medium runs for block lengths up to 340 mm and block thicknesses up to 50 mm electrical closing of the block clip Slotting and milling device for back machining Milling can be switched off/on, fixed milling depth 0.5 mm Holtmelt glue mill with application roller Glue quantity adjustable Glue application length adjustable Active side gluing via lateral glue application discs separate glue basin for separate side glue Automatic envelope pressing user-friendly touch screen Extraction device for paper dust

Equipment: - Quick-change gluing part for hot melt adhesive - Autom. Edge magazine with roll plate - Pressure zone with pneum. pressurized pressure roller and 2 free-running repressure rollers - Power Control PC 20+ control - Inlet ruler adjustable - Joining milling unit 2 x 2.2 kW - pneum. Adjustment caps, drawing blade, program adjustment side button rollers and pneum. 2-point adjustment vertical probe rollers - Cross-cut unit 2 x 0.18 kW - Milling unit 2 x 0.55 kW - Mould milling unit 1 x 0.35 kW - Drawing blade unit for PVC edges - Surface drawing blade glue joint - Cleaning agent specification workpiece - Schwabbelaggregat Specifications Edge thickness 0.4 - 8 mm Roller cutting max. 3 x 45 mm or 0.8 x 65 mm Workpiece thickness 8 - 60 mm Feed max. approx. 11 m/min. Electrics 400 V - 3 Ph. - 50 Hz Connection value approx. 10.5 kW Pneumatic connection 6 bar To ...

Labeling machine with spare parts. The machines and parts are in very good condition. It consists of 4 labeling stations. 1 Station is used for cold glue labels 2 Stations are used for sticker labels 1 Station is used for tax label/banderole The labeling speed is 20,000 bottles/hour. Manufacturer: Krones Model: Solomatic Year of construction: 2006 Labelling machine with spare parts. The machinery and the parts are in very good condition.  It consists of 4 labelling stations.  1 Station is used for cold glue labels  2 Stations are used for sticker labels  1 Station is used for tax label/Banderrolle The labelling speed is 20,000 bph. Manufacturer: Krones Model: Solomatic Manufactured in: 2006

Hydraulic press Pellegrini Hot water Pressing area 4000 mm x 1300 mm manual glue application incl. Insertion table Acceptance: Vacuum - Gantry forklift SIRIO

DEU: Technical Data and Specifications PET filling line for still water (upgradable for carbonated products and soft drinks). This line is an automatic filling line that includes a blow molder, air conveyor, rinser/filler/capping unit, labeler, shrink packer, tray packer, handle applicator, palletizer, pallet stretch wrapper, and conveyor systems for bottles, packs and pallets. Properties: Capacity: 10,800 bph in 1500 ml 18-20,000 bph 500 ml bottles Products: Still water. Suitable for carbonated and soft drinks after premix upgrade Equipment list: Blow molding machine Krones Contiform 510/K784-241 Year of construction 2008 with 10 cavities Chiller KKT Kraus KLC50T/P512469/08 Year of construction 2008 Air carriers Europool Year of construction 2000 Filler SARCMI Bluestar 2000/C9021 70 fillers Year of construction 2000 Kapper AROL TS-Euro PK / 17460  ...

Palletiser, Palletizer, Palletisation, Made: Gold Pack Slovenia, Year: 2006, Type: PAL 1100, used for PET bottles / shrink packs and cans / trays, incl. pallet stretcher, carton layer (interlayer applicator), empty pallet magazine, pallet conveyors, Siemens S7 electric control.