glass filling line used for sale

Marel portioning and grading line consisting of: - Marel transport belt, type: Conveyor, serial number: A044403, year of construction: 2007, 380-480 V, 3 Ph, 0.8 kW, plastic mesh belt, belt width: 250 mm, total dimensions: 1580 mm x 790 mm x 1020 mm. - Marel checkweigher, type: INW3 X600xi, serial number: A028794, year of construction: 2004, 380/480 V, 3 Ph, 10 A, 1.2 kW, plastic belt, belt width: 280 mm, total dimensions: 2000 mm x 1200 mm x 1400 mm. - Marel double lane portioning machine, type: IPM3 x600, serial number: A028868, year of construction: 2004, 380-480 V, 3 Ph, 50-60 Hz, 16 A, plastic belt, belt width: (2x) 280 mm, total dimensions: 2750 mm x 1200 mm x 1620 mm. - Transport belt, s/s frame, plastic belt, belt width: 420 mm, total dimensions: 800 mm x 800 mm x 1020 mm. - Scanvaegt checkweigher, type: Process Weigher 4717.425.10, serial number: BO100017, year of construction:  ...

Simo grinding and mixing line, consisting of: Simo mixer with lifter for 200 liter meat bins, type: 2AM 100L-92-08624, 380 V, 3 Ph, 50 Hz, 13 kW, volume: 100 liter, dimensions: 2400 mm x 1300 mm x 2950 mm, Simo meat pump, type: 250-120V1700, diameter screw: 250 mm, dimensions meat pump: 2500 mm x 1400 mm x 2600 mm, Simo grinder, diameter plate: 300 mm, dimensions grinder: 1200 mm x 800 mm x 2300 mm.

Buchstraße-Hardcover / Casing In Line Kolbus BF 40T Year 1977 - Serial-No. 558 Format / Size min. 100x125mm - max. 270x365mm Buchblock Dicke / Book block thickness 6 - 70mm Leistung / Mechanical speed max. up to 40 Takte/min. Buchstraße Ausstattung / Casing in Line consists of: Fliessdreischneider / Three knife Trimmer Wohlenberg Modell 44 Rundungsstation / Rounding Station Hinterklebestation für Gaze Kapitalbandstation / head-tailbanding and backlining station Deckenanleger / Case Bending Station Falzeinbrennstation / Pressing Unit Kolbus FE Pressing Stations with Heated Joint Forming

Used Wild GoosePak canning line - Year 2017Technical Specifications & Performance DataThis used bottling line is a 2017 Wild Goose 4-head canning line configured for industrial packaging and beverage production in standard LOE aluminum cans. The line is identified as WGC-250 and includes Wild Goose M-250 equipment together with a Wild Goose Paralleltrain unit. It is configured for three established can formats, allowing operators to run multiple retail pack sizes within the same second hand canning system.Manufacturer: Wild GooseLine model: WGC-250Year: 2017Configuration: 4-head canning lineCan formats: 0.355L, 0.473L and 0.568L standard LOE cansElectrical supply: 110 VAdvanced Automation & Control SystemsThe line is described as functional and is arranged as an integrated can handling and filling solution. The supplied information does not identify a PLC type, while the 110 V electrical ...

Foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. The machine is equipped with 2 format sets: 200 and 250 gram, 100 x 55 x ± 40 mm and 100 x 75 x ± 35 mm, both bottom folded. The butter is feed with direct connection with compensator. Aluminium dosing station. Automatic greasing system. The machine is fully rebuild / reconditioned by Benhil - Germany in 2006 and has stainless steel and polycarbonate covers around the machine, with CE logo on the side., Excluding:, - Outfeed conveyor, Type of Machine: Butter packaging machine , Capacity: ± 1.000 Kg/h, Capacity (Units): up to 80 packages per minute, Packaging Weight: 200 and 250 gram, Brick size: 100 x 55 x ± 40 mm and 100 x 75 x ± 37 mm, Packaging type: Bottom folded, Year of refurbishing: 2006, Motor power: 3 kW, Weight: 2.160 kg

It is a complete system for dyeing and polishing the side edges of the belt, with 3 heating ovens, extraction system and automatic ejection at the end.

Description Item # 9385 - SEMI-AUTOMATIC CHOCOLATE MOULDING LINE Manufactured by SELMI mould size 275 x 175, Speed around 4-6 moulds per minute including: SELMI Loader 275, year 2018 including scraper and mould vibration SELMI TOP temperer, year 2008, SELMI TUN cooling tunnel, year 2017, with upper deck dropping on to return belt for additional 2-pass cooling belt width 320mm tunnel 10m long: (1m infeed; 3 x 270cm covered sections; 1m outfeed) including refrigeration system

BEVEL head - 5 axes, SIDEROS table with size 4000 x 6000 mm, SIDEROS external filter ECO16CT COLLECTION BY SEPTEMBER 2026 Auction-ID: A7-50204-5

Machine: Door production line MASTERWOOD DOORLINEPROCESS Year: 2002 Components: PROJECT DOOR + DOORLINE + AMS automatic transfers Works: calibration, hinge housing, lock drilling, key/handle hole, installation of ANUBA plugs Loading: CARICATORE AMS system, suction cups, vacuum pump Panel dimensions: Max. L 2500 mm, Max. W 1300 mm, Max. H 120 mm Transfer systems: AMS mat, AMS SCARCATORE Control: GENERAL ELECTRICS T-LINE + TECNOS MW CN12 Standards: CE Auction-ID: A1-50215-27

SIDEROS ORION 2 table with scraper, year 2014 having dimensions 2600 x 12000 mm, new head and MESSER MULTITHERM4000 oxy-cuttings, year 2008, with PROFIMEC external filter COLLECTION BY SEPTEMBER 2026 Auction-ID: A7-50204-1

COMIL automatic packaging line• Year : 1991 • Complete packaging line with motorized conveyors, shrink oven and loading area• Robust steel structure with three-phase power supply• Adaptable to different product formats• Synchronized conveyors for continuous throughput• Integrated control cabinet• Estimated weight: approx. 3500 kg Auction-ID: A1-50215-32

Main lot – complete production line for biomass pellets (wood, flax and other plant materials). This lot includes all the equipment from batches 101 to 109, in the running order of the line: 1. Storage and feeding – Topoz E14207.50 6LX-2S, 6 m³ hopper and 2 belt conveyors (lot 102) 2. Crushing – AMIS / Zerma GSC 500/700 granular mill, 45 kW (lot 106) 3. Transport – Dewaele-Briche belt conveyor with hopper (lot 107) 4. Screening – 2 stand-alone Ortbauer Siebanlage Stand Alone PS 2.0 systems (lot 104) 5. Feeding and dosing – Ecokraft system with hopper and control cabinet (lot 103) 6. Granulation – 2 Ecokraft AG RP18 pellet mills with dies and spare parts (lot 101) 7. Bagging – Ecokraft / MCW-Systemtechnik plant for pelletized product (lot 105) 8. Suction – industrial dust collector Spänex SMU 45 (lot 108) 9. Electrical distribution – Legrand / Parland cabinet, boxe ...

Shower drain from the Easy Drain R-Line Clean Color series. Made of stainless steel with a brushed brass-colored PVD finish. The shower drain has a length of approximately 120 cm and comes with a flat (Zero) grid. Suitable for use in tiled floors in bathrooms and shower rooms. Equipped with a removable water lock and hair filter for maintenance. Discharge capacity approximately 60 liters per minute. Delivery in accordance with existing contents and accessories. \"The item is sold in its current state (As-Is), and as described. The lot description is leading for the content; Any accessories, decoration or other items that are not mentioned in the description are not included in the lot.\" Auction-ID: A1-49250-189

Dutch car describe buyer's costs or Export by name 100 euros radiator leaking Auction-ID: A3-46159-5238

Chicken grill with base directly from restaurant. Stainless steel. Not checked for operation. Viewing by appointment. Auction-ID: A1-40314-113

Amandus Kahl C35-780 pellet press production line Specifications: Motor power: 110 kW Sawdust capacity: 2.5 – 3 t/h Biomass capacity: 3 t/h Bran capacity: 3.5 – 4 t/h Straw capacity: 2 – 2.5 t/h L/D Ratio: 3.67:1 Press dimensions (W x H): 1,450 x 1,900 mm Press diameter: 2750 mm Penetration depth: 6 mm Press length: 22 mm Features: Amandus Kahl C35-780 Pellet Press with Base Plate New 110 kW electric motor Electric control cabinet with emergency stop Full electrical documentation Conveyor belt Screening system with automatic cooling Hydraulic nut Roller head Electrical cabling Dosing screw for product feeding Automatic filling dosing system 4 additional dies of 6 mm 60 litres of additional synthetic oil 7 new bearings 2 new wear rings 1 new air filter 2 new oil seals 1 new oil filter 1 new oil pump 20 litre 800/460 synthetic oil 1 new pressure ...

Berkel Pro Line GL30 cutting machine. This professional slicer has a 45-degree tilted blade that ensures a natural fall of the product, making it cut faster and more efficiently. In addition, the machine is equipped with a built-in and removable sharpener, which allows you to always keep the knife sharp with just one movement. In addition, the machine has a belt drive, which is quieter and requires less maintenance. Auction-ID: A1-40314-169

Missing battery Auction-ID: A1-40314-83

Main technical data of the installation: Heating plate dimensions: 2600 × 4200 mm Pressing surface: 9.16 m² Total pressure: 120 N/cm² Total pressing force: 11,000 kN Heating medium: Hot water Maximum pressing temperature: 130 °C Heat demand during the first 72 hours of operation: 200,000 kcal/h during heating from 15 °C to 100 °C within one hour: 360,000 kcal/h Total electrical connected load: 120 kW Power supply: 400 V AC, 3-phase Control voltage: 25 V Frequency: 50 Hz Required compressed air consumption: at air velocity 30 m/s: 8,500 m³/h Required air pressure: 6 bar   Intended workpiece dimensions Length: 1800 / 2465 mm Tolerance: +3 / –1 mm Width: 1200–1250 mm Tolerance: +3 / –1 mm Thickness: 6–8 mm Tolerance: ±0.1 mm As standard, the equipment is intended for workpieces with a length of 2465 mm . However, th ...

Offered is a combined Weinig/Alfred Harbs planing and profiling line for woodworking. 1) Weinig Unimat 23 E planer/moulder, year of manufacture: 1996, operating voltage: 3x380V/50Hz, control voltage: 230V/50Hz and 24V DC, rated current: 78A, main fuse: 80A, power: 34kW. 2) Weinig Uniplan fine finish/hydro planer, year of manufacture: 1996, operating voltage: 3x380V/50Hz, control voltage: 230V/50Hz and 24V DC, rated current: 42A, main fuse: 50A, power: 17kW. 3) Weinig UC 10, year of manufacture: 1996. 4) Alfred Harbs K6V, year of manufacture: 1992. Including additional associated components and transport equipment. An on-site inspection is possible.

linear axis:: - travel -x axis: - mm weight max. in kg: - kg total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

longitudinal feed: - mm slides vertical travel: - mm grip- and swivelling device: - weight max. in kg: - kg Control: Sinumerik total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Special price for pickup EXW / EX Foundation from the Osterburken site Linear/gantry axis system in heavy-duty industrial design Long horizontal X-axis 2 vertical linear axes / Z-axes Two separate handling units Rack-and-pinion drive on the horizontal axis Servo motors and gearboxes Power transmission via energy chains Pneumatic components and gripper technology Sensors and limit switches Complete cabling Separate industrial control cabinet Siemens SINAMICS servo drive technology Multiple SINAMICS motor modules / power modules Siemens industrial control and operator components Operator panel on the control cabinet Safety and switching technology Various decentralized I/O and ...

Conveyor belt 4300mm horizontal L; than 2000mm vertical elevation; than 1400mm L horizontally; size white bins = 420x160mm LxW; with pallet box with white plastic bins and a pallet with protective covers; transport dollies are NOT included in this lot Auction-ID: A1-48986-19

Equipped with: electric seats, electric windows, cruise control, CD player, handbrake, center console, Auction-ID: A1-47417-189

Equitone Linea facade panels made of fiber cement with a size of 2500 × 1220 × 10mm. The panels have a linear relief surface (Linea profile) and are suitable for use as ventilated façade cladding. The façade panels are made of through-and-through coloured fibre cement and are characterised by a groove structure over the entire length of the panel. Auction-ID: A1-45106-2207

including tooling for the production of pipes with diameters of 18, 19, 20, 25, 32, and 40 mm, as well as profiles in sizes 14x14 mm, 16x16 mm, and 20x20 mm. The applicable sheet thickness range is 0.6 mm to 1.5 mm. The forming machine—designated \"I1\"—was acquired from an Italian steel profile manufacturer in 2002 and subsequently adapted in-house for the production of the aforementioned steel pipes and profiles. The line comprises the following components: an uncoiler, a strip joining table, a strip accumulator, a forming unit, a sizing unit, a high-frequency generator, a flying saw, a discharge unit, a hydraulic pump, a control panel, and a set of forming rolls. The line utilizes a Lenze control system. Auction-ID: A1-50268-1

Beautiful Campervan equipped with E&P leveling system, air suspension. Camper is equipped with radio, swivel seats, pull-out bed above the front seats, refrigerator, freezer, 3-burner gas stove, sink, toilet, shower, 2x 1 person bed. Plenty of storage space at the back. Auction-ID: A1-47417-10

Equitone Linea facade panels made of fiber cement with a size of 2500 × 1220 × 10mm. The panels have a linear relief surface (Linea profile) and are suitable for use as ventilated façade cladding. The façade panels are made of through-and-through coloured fibre cement and are characterised by a groove structure over the entire length of the panel. Auction-ID: A1-45106-2206

With protective covers and conveyor belt on pallet; 2463 Hours Auction-ID: A1-48986-9

Total force (nominal):800 to Clamping surface (left-right):x mm Clamping surface (front-back):x mm table surface area:3200 X 2200 mm Total force (nominal):2-3-4-5- Presse - 600 to. to table surface area:2-3-4-5- Presse 3100 X1900 mm Last overhaul 2010/2020, consisting of: Circuit board washing system, manufacturer Neuhäuser, with 6 cleaning rollers, system no. 0905200, control unit by Siemens Blank automation, manufacturer Neuhäuser, type 19711594-00-0, year 2002, SN 369507/002, system no. FK42282, consisting of: destacking device, oiler, pallet changer, empty pallet discharge Gripper automation, manufacturer Olofström, type Doppin Loader 2000, SN 37719974886, system no. 0602300 Double-column press, manufacturer Weingarten, type ZS 1200.34 Year 1972, order no. 113 021, pressing force approx. 800 t, double action, stroke 850 mm, stroke adjustment 350 mm, height between table surface an ...

material width:400 mm coil weight:3,0 t material thickness:0,5 - 4,0 mm coil internal diameter:460 - 530 mm coil external diameter:1500 mm no. of straightening rolls:9 straightening roll diameter:50 mm no. of lower support rolls:12 no. of upper support rolls:10 diameter of support rolls:90 mm material cross-cut:1600 mm² speed of coil line:0 - 20 m/min power requirement:35,0 kW weight:10,5 t dimensions (WxDxH):10,0 x 2,5 x 2,9 m straightening machine:KRE 50.400/9 adjustment of straightening rolls :motoric insertion wedge:hydraulic adjustable decoiler:3000.1 snubber roll:hydraulic expansion:hydraulic sideway adjustment:motoric pivoting:manual roll feed:Servo; WVE 160/400 intermittant lifting:hydraulic

material width:300 mm coil weight:2 x 1,25 t material thickness:0,4 - 1,2 mm coil internal diameter:320 - 420 mm coil external diameter:1300 mm no. of straightening rolls:9 straightening roll diameter:30 mm number of draw-in rolls:2 roll diameter:30 mm speed:3 - 30 m/min feed length:0 - 9999,9 mm power requirement:3,0 + 2,5 kW weight of decoiler:0,7 t dimensions decoiler (WxDxH):2,1 x 1,4 x 1,5 mm weight of straightening machine:0,45 t dimensions straightener (WxDxH):1,5 x 0,8 x 1,1 mm weight of the feeder:0,4 t dimensions feeder (WxDxH):1,2 x 0,8 x 1,1 mm universal straightening machine:SC 12-FQ double decoiler:2352 B-FPS expansion:hydraulic lag brake:pneumatic electronic roll feed:WAV-RDS-2Z, Modell 1082 B intermittant lifting:pneumatic control:Siemens S 5

material width:600 mm coil weight:5,0 t material thickness: - 5,0 mm coil internal diameter:360 - 660 mm coil external diameter:1500 mm no. of straightening rolls:9 straightening roll diameter:80 mm number of draw-in rolls:2 material cross-cut:1600 mm² weight of feeeder-straightener:2,5 t weight of decoiler:1,5 t dimensions feeder-straightener (WxDxH):1,7 x 1,7 x 2,6 mm dimensions decoiler (WxDxH):1,8 x 2,0 x 2,3 mm feeder-straightener:VCRL 650, Bj. 1994, GR 2001 height adjustment:motorisch alligator opening:hydraulisch decoiler:SHR 5000, Bj. 2000 expansion:hydraulisch

material width coil line:600 mm coil weight:2 x 3,5 t coil internal diameter:460 - 530 mm coil external diameter:1500 mm material thickness coil line:0,5 - 3,0 mm no. of straightening rolls:7 no. of rolls at in- and outlet:4 roll diameter:80 mm feed length:0 - 500 mm power requirement:10,0 kW weight:10,0 t dimensions of the coil line:8,8 x 4,0 x 2,55 m straightening machine:Dimeco, 1676 EV double decoiler:2382 FFPS lag brake:pneumatic electronic roll feed:Microfeed

material width:500 mm coil weight:3,0 t material thickness:0,2 - 2,5 mm coil internal diameter:470 - 530 mm coil external diameter:1400 mm no. of straightening rolls:9 straightening roll diameter:40 mm number of inlet and outlet rolls:4 material cross-cut:1200 mm² speed:1,5 - 30 m/min dimensions decoiler (WxDxH):1,9 x 0,6 x 1,7 m weight decoiler:1,1 t dimensions straightener (WxDxH):3,3 x 1,3 x 2,7 m weight straightener:3,0 t straightening machine:RYD 40 x 500 decoiler:DY 500 x 3000 coil lifting device:hydraulic rool feed:elektronic; AESL 500-2,8 threading device:hydraulic expansion:hydraulic