glass filling line used for sale

Serial Number: 7880-10 Weight: 2,5 tons Power: 6 kW Air pressure: 6 bar Length mm: 5000 Width mm: 1000 Height mm: 3500 Working height: 70 cm. Transport size L x W x H: 5,0 x 1,0 x 3,5 + 1,1 x 0,8 x 1,35 Maximum speed: 1,6m/min. Min.-max. glass thickness: 50 mm Condition machine : Good Control type: Manually/ semi automatic Electric. Connection: 400 V Documentation: No Instructions: No Electric diagram: No Photos en video available

Inv. Num. : 7787 Type: JR1.40 Producer: CMS Brembana Created: 2012 Parameters: Work table length: 2600 mm Work table width: 1700 mm A set of tools and gears for various tools (cup wheels/saws/chamfer discs) are available for the machine.

VSG glass cutting table with roller conveyor and conveyor belts used Manufacturer: BYSTRONIC Year: 1996 Cutting width max. approx. 306 cm Dimensions cutting table total approx. 8 x 5 x 1.8 m Dimensions roller conveyor approx. 6 x 3 x 1 m The roller conveyor can be tilted hydraulically Conveyor belt approx. 6 x 3 x 1 m Conveyor belt approx. 3 x 3 x 1 m Table approx. 2.7 x 3.5 m The plant has been dismantled Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Glass Slices Cutting Table Used HEGLA VSG A 37 Year: 1997 Total dimensions: approx. 11.5 x 4.4 x 2.5 m Hydraulically tiltable loading table with air cushion and conveyor belt The plant has been dismantled Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Neue Glaslineale - New Glass Rule Polar 72-82-90-115 Year 2014 for the following guillotines: Polar 72 Polar 82 Polar 90 Polar 115 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Glass Chemical Pump, Water Pump, Centrifugal Pump PAGUS Motor: 4 kW 2880 rpm 220/ 380 V 50 Hz

Small cuvette, small glass cuvette with folded lid in a set MLW Type 8 5 cm Set consists of 4 cuvettes: 1x 4,995 2x 5,001 1x 5,003 dimension(single cuvette): 55 x 15 x 30 mm in wooden box used, tested ! Dimensions: 280 x 70 x 45 mm

pH glass electrode with fixed cable and free end SCHOTT 9517/85 285115255 diameter: Ø 12 mm length: 120 mm New ! Dimension(packaging): 410 x 105 x 70 mm

Machine Glass Thermometer, Thermometer CONATEX 0 to 160 °C 580781 SM000066 L= 100 mm 1/2 in New ! Dimensions: 380 x 90 x 40 mm

Machine Glass Thermometer, Thermometer TECSIS 0 to 100 °C L= 65 mm 1/2 inch New ! Dimensions: 285 x 35 x 55 mm

Marver MV S-400 semi-automatic cutting table for flat glass Find more here - / Contact us at -

Hobart Dishwasher Type: FXS-10A & 10B Specifications: Power connection: 400V / 7.6 kW / 15.8 A / 50 Hz Capacity: 40 baskets/hour Programs: 90 / 180 / 360 sec. Insertion height: 52.5 cm Built in 2017 and 2014 Dimensions: Width: approx. 60 cm Depth: approx. 60 cm Height: approx. 80 cm

Inv. Num. : 8205 Type: Pratica GLP Producer: Bottero Created: 2015 Parameters: Max. workpiece dimensions: 3150 x 1415 mm Number of axes: 3

Doubleside glass grinding machine Min glass dimention 160x160mm Glass thickness 3-30 mm

Brand: Meniconi Putsch Type: CA-75-BR Kind: Sawing machine Assets: 18A Length mm: 4,500 Depth mm: 1,200 (1,900 incl. bridge) Height mm: 3,400 ex. bridge Electrical diagram: Present Other: Has some defects, will be resolved before delivery.

Brand Hegla Type Cutting table Layered Fashion model VSG-H Serial Number 1104 Construction year Jun-95 Weight 3 tons Assets 19 kW Air pressure 6 bars Water pressure: 50Hz Length mm 3700 Width mm 3400 Working height mm 980 Min.-max. glass thickness 2 x 3mm to 2 x 6mm Number of cutting heads 2 cutting heads Separation heating and air cushion Automatic sequence for cutting, breaking, heating and separating functions. Electric connection 380/ 400V Photos/film available: Photos available

Cutting angle (fixed): 45°, max. cutting height: 50mm, max. cutting width: 100mm, max. saw blade diameter: 250mm, machine dimensions X/Y: approx. 500mm/1100mm. On-site inspection is possible.

A double-sided Busetti glass drilling machine is available. Drilling heads: 2, drilling dimensions X/Y: 1250mm/1450mm, min. drilling diameter: 3mm, max. drilling diameter both drills/with top drill: 130mm/220mm, speed: 4000rpm, max. glass thickness: 38mm. Machine dimensions X/Y/Z: approx. 4500mm/2050mm/2300mm, weight: approx. 1700kg. An on-site inspection is possible.

Max. Glass sheet dimensions X/Y: 6000mm/3210mm, cutting accuracy: +/-0.5mm, cutting speed: 150m/min, weight: approx. 900kg. Documentation available. On-site inspection is possible.

Laser power: 10W, Laser type: HyperRapid NX10, Mains voltage: 400V, 60Hz, Phases: L1+L2+L3+N+PE, rated current: 12.5A, peak current: 25A, rated power: 8.65kW, max. power: 17.3kW. Applications: Laser cleaning, laser marking, laser structuring, laser cutting. Machine dimensions X/Y/Z: approx. 1400mm/1400mm/2200mm, weight: approx. 4000kg. Documentation available.

A Bottero glass cutting machine is available. Cutting thickness range: 2mm-19mm, max. glass dimensions X/Y: 3650mm/2750mm, weight: approx. 1650kg. On-site inspection is possible.

A Mitsuboshi Diamond Industrial CNC glass cutting machine is available. Glass thickness range straight: 0.4mm-1.1mm, glass thickness range curve: 0.8mm-2.2mm, cutting range X/Y: 500mm/500mm, cutting speed: 500mm/s, cutting accuracy straight: +/-40µm, cutting accuracy curves (depending on radius): +/-100µm. Machine dimensions X/Y/Z: approx. 1100mm/1900mm/1600mm, weight: approx. 1000kg. Documentation available. On-site inspection is possible.

Manufacturer: Lisec Technical Specifications ( Model: ATH -60/30 D) - Year of Manufacture: 1995 - Operating Voltage: 380 V, 3-phase, 50 Hz - Power Consumption: 5.9 kW - Machine Weight: 6,000 kg - Compressed Air Pressure: 6 bar - Maximum Load Capacity: 500 kg Machine Length: 6,600 mm Total Installation Length: - With 4 glass racks: 25,500 mm - With 3 glass racks: 19,300 mm - With 2 glass racks: 13,100 mm - With 1 glass rack: 6,900 mm Depth: 3,200 mm Height: 3,600 mm Load Capacity: 600 kg Transport Speed: 40 m/min Glass Size (Max): 3,250 × 6,000 mm Glass Size (Min): 1,600 × 2,800 mm Glass Thickness: 3–12 mm Electrical Connection: 220/380 V, 50 Hz Installed Power: 6 kW Compressed Air Connection: NW 9, 6 bar Technical Specifications ( Model: ESL-60/30RS) - Year of Manufacture: 1998 - Operating Voltage: 400 V, 3-phase, PE, 50 Hz - Power Connection: 13.5 kW - Machine Weigh ...

A fully automatic Schüco glazing bead saw is available. Saw blade diameter: 400mm, cutting angle: 45°/90°, motor type: E63SP-2, speed: 2800rpm. On-site inspection is possible.

100 litre, Stock number: T3496, Litre: 100, Material: Glass, In stock: Yes, Amount in stock: 1 pc., Item: Glass reactor, Standing: In frame, Double jacket: Yes, Heating coil: Yes, Agitator: From the top, Inner diameter: Ø 600 mm., Total height: 1935 mm., Manufacturer: QVF Engineering GMBh, Other: Condensor in top, agitator with variable speed

TAMGLASS HTF Super-2436-CT-10 Glass tempering Furnace Producer TAMGLASS YOM 2005 2020 is refurbished by GLASTON, new hardware and new software. In production until end of 2021 Operating hours 49,700 h Machine number: HTF Super 0424 Glass dimensions - 2400 x 3600 mm Glass thickness 4-19 mm (glasses with thickness 10 and 12 mm and size up to 3800 mm can be tempered as well). Productivity at normal operation in 7 hours: - 5 cycles/hour (10 mm glass). - 6.25 cycles/hour (10 mm glass), etc. Set of spare parts is included.

Roaches 3 Bath Laboratory Glass Dyeing Machine Roaches 3 Bath Laboratory Dyeing Machine 240 V 6500 W 10 A HxWxD= 920 x 1760 x 450 mm More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Manufacturer: Uniglass Model: UGTPLUS 1548-1-R Year of Manufacture: 2010 Voltage: 400 V AC Frequency: 50 Hz Control Voltage: 230 V AC / 24 V DC Power Ratings: - Heating Power: 690 kW - Motor Power: 870 kW - Total Power: 1570 kW Certification: CE Marked - the max. oven capacity is 4800x1500mm - the smallest dimension must have a diagonal of 290mm - The furnace can prestress thicknesses from 2.85 – 15mm - Regarding the condition of the system, it must unfortunately be mentioned that the ceramic rollers are in a bad condition Find more here - / Contact us at -

A single-chamber glass tempering furnace (pre-stressing system) Uniglass for the toughening process of safety glass is available. Heating capacity: 690kW, motor power: 870kW, total power: 1570kW, minimum diagonal dimension: 290mm, glass thickness range: 2.85mm–15mm, max. glass dimensions X/Y: 4800mm/1500mm. The ceramic rollers are in poor condition. Documentation available. An on-site inspection is possible. Expected to be available from November 2025.

Specifications Follow asap 04.1.189

Specifications Brand: Baudin Type: 681MB Kind: Flat Poly Grinding Machine Serial number: 409 Year of construction: 1991 Length mm: 5,800mm Width mm: 1,600mm Height mm: 2,500mm Max speed: Adjustable from 0.4 to 4.2 m/min. Min.-max. glass thickness: 3–25 mm Min.-max. glass size: 80×120, up to 3,000×3,000 State machine: Working disassembled, Photos/film available: Photos available 02.1.200

Glass and drying plant Lisec type VHW-20/6 Specifications: • Glass thickness (mm): up to 30 • Glass height (mm): up to 2000 • Cleaning brushes: 4 front and 4 rear

Manufacturer: Bottero Model: TRANSFER 500P Year of Manufacture: 2018 Voltage: 400 V Frequency: 50 Hz Rated Current (In): 3 A Mass: 1000 kg Minimum size : 140mm Max. size : 2000mm Thicknesses from 3mm – 19mm They have also ground 2mm glass several times. Find more here - / Contact us at -

- Model: MAX 80 CNP - Manufacturer : Glaston - Year of manufacture : 2015 - Condition: Used Includes water reservoir tanks and cerium mixing tank with all equipment and several consumable spear parts. Find more here - / Contact us at -

The system was used to paint glass bottles. It has two spray booths and a dryer with liquid gas. Temperature 170/180 degrees C. Size: 3.80 meters wide, about 11 meters long. Works perfectly. Has been constantly maintained. Many spare parts with him.

Offer 25369 Specifications: - Max. load capacity with full ballast approx. 250 kg - 4 Vacuum Glass Suction Cups 200 mm - Lifting height in the middle of the top suction cup up to approx. 2.5 m - Separate height adjustment + twisting device - min. construction height approx. 1285 mm - max. overall height approx. 2720 mm - max. total length approx. 2100 mm - min. width approx. 620 mm - Net weight depending on ballast approx. 260 to 410 kg - Charger 220 V - Battery 12 V -Operating instructions

Glass bottle filler Krones 66 / 11 with 66 filling valves and 11head screw capper year of manufacturing: 1997 Capacity: 22 000 bph by 0,5 ltr. bottles 24 000 bph by 0,33 ltr. bottles with 66 filling valvesand 11head crown capper, short filling tubes work direction: left to right double evacuation system crown cork transport system with PLC Siemens S5, incl. changeover parts for 330 ml and 500 ml filling products: beer, alcohol free beer, long drinks, cocktails, cider, soft drink, carbonized water, still water The machine is still in production until January 2026 and can be inpsected.

The Besana CMB 70/2TC glass drill is an industrial double-sided drill for glass processing. Here are the key specifications I found for you: Technical Specifications Type : Besana CMB 70/2TC Drill table dimensions : 950 x 950 mm Throat depth : 1200 mm Number of speeds : 4 adjustable speeds per drill head Dimensions (L x D x H) : 3000 x 2550 x 1800 mm Power : 3 kW, 380V – 50 Hz – 3F+N+PE Weight : 750 kg Application This machine is suitable for: Double-sided drilling in glass plates Precision machining in the flat glass industry If you are looking for a machine for professional use in glass processing, this model is a solid choice. 04.1.204

Labeling system PRINTWOLF from 2013 for glasses and small bottles (approx. 60ml - 250ml),, very good condition, 2 Collamat label dispensers for self-adhesive labels, Labeling of the front label (on the glass) also possible in two parts, labeling of the lid, PLC control (Siemens),, high-quality sensors, also detect black and transparent labels, Vacuum rewind belt with 2 different feed screws., Angular glasses (hexagon/octagon) can also be labeled, Labeling speed: 18 meters / min (about 80 glasses), Labeling accuracy: +/- 1mm, Supply: 400 V 50 Hz power approx. 1.5 KVA, Aluminum - stainless steel frame., The belt length of the machine is 3.97m., Separate control cabinet, Matching, additional packaging table with conveyor belt, The work table has dimensions of 1.20 x 2.32 x 0.94 m W/L/H (table top), The total length with tape overhangs is 3.20m, power: Labeling speed: 18 meters / min (about  ...

This is a LITTLE GEM glass bottle filler for 1 Pint milk bottles round format. The machine cuts and applies with heat sealing the aluminium cap that is done via a fords cutter and capper. This machine can do 1pint and 2 pints. The machine has been running until 2025 and can be sold either as is working condition or fully refurbished . The machine is driven by 1 single motor that is located at the bottom of the machine turning two gears one opposite to the other making this a very robust and easy to maintain system., Capacity: 2000 bottles per hour , Aluminium Cutting: Fords systems , Format: 1 Pint Milk Bottles , Sealing Device: Included , Construction: Fully Stainless steel on product connection Parts , Filling Type: Mechanical valves that the bottles lifts the rubbers up and the milk flows through, one the mechanical vacuum is activated this helps to avoid over, Collection Table: Inclu ...

A vertical washing and drying system for flat glass is offered: 3 cleaning zones, 6 roller brushes, drying zone (warm air), warm water treatment (heating tank), quartz sand filter, recirculation system, suitable for: float glass, laminated glass, load capacity: 150kg/m², glass thickness: up to 15mm, working height: approx. 2000mm. Inspection possible by arrangement.

A small Striffler glazing bead saw is available. Cutting speed: 36m/s, working length: 2400mm, miter setting: 45°, max. cutting width: 75mm, max. cutting height: 50mm, saw blade dimensions X/Y: 250mm/220mm, weight: approx. 100kg. An on-site inspection is possible.

ORTMANN + HERBST 100 / 20 Type Hansa B with 100 filling valves and 20head aluminium screw capper Pitch: 115 mm Capacity: up to 30.000 bph by 750 ml glass bottles Original year of manufacturing: 1994 The machine was complete refurbished in 2013 by company Hormes / Germany, incl. new electric system with Siemens S 7 and touch panel incl. new main bearing incl. new safety housing around the machine incl. two change part sets for 250 ml bottle and 750 ml bottle

CNC controlled cutting table for flat glass sheets 6000 x 3210 mm. With topiary and model catalogue. The glass panels are placed on top by means of swivelling arms. Power consumption 20 kW, dimensions 9200 x 4500 mm

Set packer for glasses, packing pattern 3 x 4., The pre-grouped glasses are transferred into the prefabricated tray using vacuum suction cups., The 2013 VestTech Jar Packer is a reliable solution for the packaging industry, specializing in the precise and safe packaging of jars. The unit has a solid construction designed for long-lasting use in demanding production environments. With its user-friendly operation and high efficiency, this jar packer offers an ideal combination of performance and reliability. It is perfect for companies looking for a cost-effective way to optimize their packaging processes. With the VestTech Jar Packer, you can ensure that your products are packaged safely and precisely, resulting in improved productivity and higher customer satisfaction.

metal detector spec. for jars, make Loma type IQ4, year 2005/2021, With search head, make LOMA IQ4 (search head - opening: width: 150 mm, height: 250 mm), Search head design: stainless steel housing, protection class IP 69k,, · 3-frequency technology to better adapt to different product effects and package sizes, Conveyor belt year 2005, unused, with Intralox tape, IP 67,, ejection by means of an air nozzle,, Drive with Danfoss frequency converter,, · Output: up to max. approx. 200 packs / min., Tape data:, Protection class: IP 67, · Total length: approx. 2,000 mm,, Useful width of the Intralox belt: 100 mm,, · Lockable box for rejected products, Plastic side guide in the inlet: length: 560 mm, height: 130 mm,, · With transfer rollers in the infeed and outfeed for gentle transfer of the containers.

suitable for tomatoes and other soft fruit and vegetable varieties, sawtooth-shaped cutting blades that move back and forth at high speeds, low cutting pressure, max. product dimensions: 100 x 70 mm, existing cutting set: 4.76 mm cutting thickness, WILLICH STORAGE.

An old Knopp glass grinding machine for edge processing is available. Grinding belt dimensions X/Y: 1830mm/100mm, glass types: float glass/mirror glass/furniture glass/table tops, grinding wheel diameter: 200mm, table dimensions X/Y: 900mm/1400mm, machine dimensions X/Y/Z: approx. 1300mm/1500mm/1700mm, weight: approx. 500kg. On site inspection is possible.

automatically, a closing station in rotation. , Drive: 1.5 kW, Generation of the vacuum by means of a vacuum pump, with closure sorting, with device for TO 53, TO 66, TO 82, format parts for glasses with diameter approx: 60, 64, 70, 78, 90 and 102 mm (65ml, 125ml, 275ml and 1,062ml glasses),, Output: up to a maximum of 1,200 glasses per hour.

Overview  This glass bottle depalletizer was manufactured in 2006 by Italian company MAS PACK. The machine is currently in production until end of July 2026 and forms part of a wine bottling line. Visits are possible on request. The machine is well maintained. Technical data  Capacity: Up to 7,200 bph Application: Glass bottles Formats: 37.5 cl Bourgogne 75 cl Bourgogne 1.5 L Magnum Power supply: 5 kW Air supply: 150 L/min