136,830 used machines on RESALE, but how to find them? Machine Search
Due date 2024; diameter 355 mm; in original packaging; Auction-ID: A1-50707-262
Due date 2024; diameter 355 mm; in original packaging; Auction-ID: A1-50707-264
Supplied with hand cutting torch, ground cable and accessories, unused in box. Auction-ID: A1-41281-284
Compressed Air Plasma Cutting Machine Brand: Stahlfest Type: SFPC70 Maximum cutting thickness: max. cutting thickness 20 mm Connection: 380 volts adjustable current: 20A - 60A Start: scratch-start duty cycle: 60% duty cycle (60A) Technology: IGBT Technology Protection: circuit breaker Including: plasma torch, accessories and protective cover Not included: 380 volt plug Condition: Unused and in the original packaging Auction-ID: A1-51368-73
Due date 2024; diameter 355 mm; in original packaging; Auction-ID: A1-50707-263
Compressed Air Plasma Cutting Machine Brand: Stahlfest Type: SFPC130 Maximum cutting thickness: max. cutting thickness 45 mm Connection: 380 volts adjustable current: 30-120 A Start: Equipped with: Pilot Arc duty cycle: 60% duty cycle (120 A) Technology: IGBT Technology Protection: circuit breaker Additional function: Plug for CNC control Including: plasma torch, accessories and protective cover Not included: power cable and 380 volt plug Condition: Unused and in the original packaging Auction-ID: A1-51368-74
turning diameter over bed: 280 mm turning diameter over slide rest: 170 mm turning length: 650 mm center height over bed: 140 mm centre distance: 650 mm bed width: 155 mm spindle taper: KK 4 CAMLOCK DIN 55029 spindle bore: 40 mm turning speed range - stepless: 4.000 U/min 4-jaw-chuck diameter: 140 mm quick change toolholder: MULTIFIX Typ A drive capacity - spindle motor: 7,5 kW taper in tailstock-quill: MK 2 dia. of quill: 30 mm quill stroke: 80 mm voltage: 400 V total power requirement: 7,5 kW weight of the machine ca.: 400 kg dimensions of the machine ca.: 1,30 x 0,70 x 1,60 m - Serial-No.: C7D W13 02 - 3-axis digital display - Stepless speed adjustment - Digital speed display - MULTIFIX quick-change tool holder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0330 mm : 210 mm : 1000 mm : 167 mm : 40 mm : 2,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Granulator ALPINA 800-150, suitable for secondary crushing. Technical data and equipment: • Drive power: 15 kW • Fully functional • With control • Optionally with blower and suction to the cyclone • Matching conveyor belt in stock After consultation, a test of the machine is possible. Condition: very good, used and fully functional.
used
Granulator AGRIFON 650 mm x 550 mm for crushing, for example of lumps. Technical data and equipment: • Year of construction: 2022 • Power: 22 kW • Open rotor • Grinder: 650 mm x 550 mm • With control • Unused machine • Spare parts such as sieve and knife can be supplied Condition: mint condition, used and fully functional.
Engine: 224 cc 4-stroke petrol engine Cutting width: 53 cm Maximum range: Controllable up to 600 meters away Fuel tank: 1 litre Consumption: Approximately 0.7 liters per hour Maximum Inclination: Up to 45 degrees Maximum speed: 3 km/h Cutting height: Adjustable between 3 and 12 cm Control system: Remote control via wireless transmitter, with a range of up to 600 meters Design: Robust and suitable for slopes up to 45 degrees Ease of use: Easy operation and adjustability for optimal mowing results Safety: Incl. emergency braking and obstacle detection for safe use on steep slopes Remote lawn care, without physical presence Auction-ID: A1-40333-112
Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated Input Current: 14A Rated input power: 9.2 KVA Open circuit voltage: 256V Output Current Setting: 20-60A Rated Output Voltage: 104V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc discharge by contact Auction-ID: A1-40333-125
Connected load 28 kVA, fuse 50 A, operating hours 6000 h, incl. plasma power source KJELLBERG HiFocus 161i Neo with automatic gas mixing console and 2 cutting heads and wear parts package, without filter extraction system and without technical gases Auction-ID: A1-51205-1
Working width: 1200 mm. 400 volts Ready to plug in Auction-ID: A1-47367-100
2014 Holaras Hippo 2000 Beet Cleaner/Cutting Drum – 2.5 m³ – Euro 2000/Volvo – Remote Control Specifications: Brand: Holaras Manufacturer: Hoopman Machines B.V., Aalten Type: Hippo 2000 Year of construction: 2014 Serial Number: 1422-0428 CE marked Type: Hydraulic Beet Cleaning/Cutting Drum Volume: approx. 2.5 m³ Cutting/working width: approx. 2,250 mm Own weight: approx. 2,050 kg Recording: Euro 2000 / Volvo Electro-hydraulic control: 12 V Remote Control Frequency: 433 MHz Protection class remote control: IP54 Features: Hydraulically driven rotary cleaning drum Cutting device Version for picking, cleaning and cutting/processing beets Preparation for mounting additional knives for potato processing Wireless Icarus TX Heavy remote control with multiple functions and emergency stop Hydraulic hoses and connections Heavy Duty Welded Steel Structure Suita ...
ESSILOR - TCB800 Tracer Centerer Blocker + ES800M Edging System very good working condition and cosmetic material TCB 800, the new high-performance automatic reader. It enables guided work, easy decision-making and assembly preparation ES 800M is a compact and easy-to-use edge finishing system for in-office use Please inspect. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force. Lots may be added to the list later. An exhibition beforehand is set up, please inspect. The equipment is made available on pallet or pallet box or cardboard with all the appropriate protections, the price of the pack ...
table length: 3048 mm table width: 1524 mm burner heads: 1 Control: CNC workpiece weight: 911 kg traversing speed: 80 m/min dimensions of the machine ca.: 5600 x 2260 x 1960 mm 1. BodorPower 6 kW laser source 2. BodorGenius laser cutting head with autofocus 3. BodorThinker 3.0 control system 4. Bed with tenon-and-mortise structure 5. Bodor servo motor and driver 6. Bodor oxygen control valve and nitrogen control valve 7. Bodor Lightning perforation technology 8. 21.5-inch touchscreen monitor 9. Automatic cutting gas pressure adjustment 10. Active anti-collision function 11. Intelligent vibration protection 12. Burn-resistant mineral cast housing 13. Bodor Mango® ergonomic remote control 14. Gas-saving nozzles with stable flow 15. Smart maintenance reminder 16. Wi-Fi internet connection 17. Smart alarm for anomalies 18. Water cooling 19. Wear parts kit 20. Exhaust system 21. Nitrogen p ...
tube diameter: 8 - 230 mm workpiece weight: 300 kg weight: 2450 kg dimensions of the machine ca.: 9374 x 1872 x 2285 mm Technical Specifications: Max. diameter of round tubing (mm): 8 - 230 Max. diameter of square tubing (mm): 8 - 230 Rectangular tubing (mm): 8 - 230 Profile (mm) Angle steel: 30 - 140 Channel steel: 50 - 140 I-beams: 100 - 140 H-beams: 100100 - 140140 Max. pipe material length (mm) 6500 Max. cut pipe length (mm) 3000 Max. workpiece weight (kg) / (kg/m) 300 / 46 Max. acceleration 1G Shortest remaining material (mm) 70 Positioning accuracy (mm) 0.05 Repeatability (mm) 0.03 Max. material thickness, carbon steel (mm) 16 Max. material thickness, stainless steel (mm) 12 Configuration 1. BodorPower laser source, 6 kW 2. BodorGenius T high-precision laser head with autofocus 3. BodorThinker Tube control system 4. Pneumatic chuck 5. Bodor Lightning perforation technology 6. Adapt ...
With control terminal, 1 sand conveyor, 1 sludge separator, 1 safety light curtain, 2 sludge tanks and 1 used pressure booster basic pump (55/60K). Defects: Servo control defective. No test run possible. Auction-ID: A1-51529-53
The machine must be dismantled and loaded by the buyer himself. The transport and loading equipment that may be required for this purpose must be organized and provided by the buyer himself. The collection must take place by 11.12.2026 at the latest. If the machine has not been picked up by this date, it will be relocated or, if necessary, disposed of at the buyer's expense. Auction-ID: A7-51502-1
19000119 Used and untested Auction-ID: A7-51504-83
Lot of 30 graduated adhesive cutting mats Lot consisting of 30 adhesive cutting mats with measuring graduations. Important information – to be read before bidding Goods from end-of-series and surplus, sold as is. The information in this description (quantities, capacities, dates, composition) is provided by the seller. The photos, quantities, dimensions and weights are not contractual. The appearance of the packaging and products may vary from one item to another. A visit is strongly recommended before bidding. The buyer bids with full knowledge of the facts and remains solely responsible for his or her assessment of the lot. Auction-ID: A1-51086-13
23000274 Auction-ID: A7-51504-101
19000467 Used and untested Auction-ID: A7-51504-94
OPTIMA OptiCUTTER JET – CNC Waterjet Cutting Machine Brand: OPTIMA Model: OptiCUTTER JET Manufacturer: Sipro Tecnocoral (branding visible) Machine Type: CNC Waterjet Cutting Machine Condition: Used Application: Industrial Precision Cutting Auction-ID: A1-51153-94
Voltage: 400 V Frequency: 50 Hz Fuse: 3 × 35 A Control voltage: 24 V DC Speed I: 3,000 rpm Saw blade diameter: Ø 350 to 450 mm Weight: approx. 3800 Kg Auction-ID: A1-51506-2
BODOR BDDC-8L Dust Extraction for Laser Cutting Machines – 11 kW Brand: BODOR Manufacturer: Jinan Bodor CNC Machine Co., Ltd. Device name: Dust Collector Model: BDDC-8L Motor power: 11 kW Condition: New Electrical data Motor current at full load: 22 A Electrical connection: 380 V AC, 50 Hz, 3 phases Equipment & Use Dust extraction and dedusting system for laser cutting machines For capturing and filtering dust generated during laser cutting From the scope of delivery of a Bodor laser cutting machine Offered as a separate single unit CE marking available Technical data Net weight: 1,200 kg Scope of Delivery 1 x BODOR BDDC-8L Dust Extraction System Auction-ID: A1-51205-2295
72 bags of 25 kg. Approx. 1,800kg. In stock on 2 pallets. Auction-ID: A1-51529-55
19000100 Used and untested Auction-ID: A7-51504-63
Hartner Multi-Step Drills Precision reimagined. Efficiency made tangible. Made in Germany. The multi-step drills are the intelligent further development of classic HSS and HSS-E twist drills. Thanks to their innovative step-drill geometry, the drills deliver significantly higher performance, greater precision, and noticeably improved drilling comfort in daily use. What makes the multi-step drill so special? Unlike conventional HSS drills that machine material in a single cutting action, the multi-step drill works in several defined cutting stages. The result is smooth, low-vibration operation with significantly lower force requirements. Additional advantages include optimal chip removal, perfectly round and precise holes, and almost burr-free hole exits. Even when used with hand drills and cordless drills, the special geometry enables controlled drilling without jamming or slipping in t ...
Arntz Blue Line saw blade Length: 5800 mm Specification: 41 x 1.3 mm 2/3 K Carbide band saw blades with pre-cutting and post-cutting geometry for machining non-ferrous metals and graphite. The specialist for: - Aluminium alloys - Aluminium bronzes - Copper alloys - Sand-cast aluminium and magnesium castings - Graphite
L & Z lathe / WEILER CONDOR AC / Stepless speed regulation / FROM A TRAINING FACILITY - CE - Marking -Year of manufacture 2000 -Turning diameter over face slide 180mm -Tip height 165mm -Max. turning diameter 330mm -Turning length approx. 800mm -Speed (infinitely variable) max. 2800 rpm -Automatic longitudinal/plane feeds -Thread/Metric/Inch etc. -Three-jaw chuck -Tailstock -Swarf back wall -Machine light -Multifix base holder & 6x inserts -Various interchangeable wheels -Coolant device -Miscellaneous operating tools -Documentation Dimensions: LxWxH 1.8x1x1.8 meters / Weight 1300Kg
Max. cutting width: 920 mm • Max. cutting length: 920 mm • Max. pile height: 120 mm • Min. cut: 25 mm (without false clamp plate) / 90 mm (with false clamp plate) • Max. clamp pressure: 30,000 N • Max. cutting speed: 42 cuts/min • Front table length: 632 mm • Main motor: 3 kW • Power supply: 380 V, 3-phase • Drive: hydraulic
1.0 pcs. Granulator incl. extraction and Soundproof enclosures Manufacturer: RAPID Year of Make: 2005 Type: 3590-KL6 Insertion size: 350 mm x 900 mm Rotor diameter: 900 mm Motor power; 22 KW
1.0 pcs. Granulator incl. extraction and Soundproof enclosures Manufacturer: HERBOLD Year of Make: 1998 Type: SML35/42 S3/2-2 Insertion size: 410 mm x 350 mm Rotor diameter: 420 mm Engine power; 18.5 KW
maximum number of results exceeded
please refine your search
10 € 
