127,906 used machines on RESALE, but how to find them? Machine Search
Rotary Press 23 Stations upgraded with a new rejection system C50 V This rotary tablet press is suitable for manufacturing tablets up to a dia. of 16 mm The machine is designed to accept IPT Type B tooling and has a capacity of 23,000 up to 136,000 tablets per hour. Technical specifications: Compression: max. 80 kN Pre-compression: max. 23,0 kN Tablet Diameter: 16 mm Depth of fill: 16 mm Output: 23.000 - 136.000 tablets/hour Die diameter: 30,16 mm
Rotary Press 23 Stations Kilian LX 23 A ST , the machine was recently updated with a rejection system and control unit C50V This rotary tablet press is suitable for manufacturing tablets up to a dia. of 16 mm The machine is designed to accept EURO-NORM Type B tooling and has a capacity of 23,000 up to 136,000 tablets per hour. Technical specifications: Compression: max. 80 kN Pre-compression: max. 23,0 kN Tablet Diameter: 16 mm Depth of fill: 16 mm Output: 23.000 - 136.000 tablets/hour Die diameter: 30,16 mm
Welding turning and tipping-positioning table Technical data: -Load capacity at horizontal position 15000 kg -Load capacity in vertical position 10000 kg -Planpauc diameter 1850 mm -Plane disc with crane support can be swivelled continuously -Rotary motion electr. infinitely controllable -Right-Link Run -Drive 400 V -Ft remote taster -Massea cables -Welding current transmission 500 A -Table height at horizontal position 1850 mm -Space requirements approx. B 2450 x H 1850/2300 x T 3000 mm -Weight approx. 6000 kg
Table belt grinding machine Bürkle L x W x H: 3.5 x 1.7 x 1.8 m Built in 1963 Weight approx. 650 kg The machine is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Basic dimensions: Width: approx. 1,725 mm Depth: approx. 750 mm Height: variable The scope of delivery includes: 01x Workbench frame, new Material colour: grey Workbench frame legs: Heights adjustable 01x Drawer cabinet, new Material colour body: grey Material color door: blue Lockable: yes Number of drawers: 3 pieces Drawer height: 115 mm 01x Worktop, new Material: Multiplex Material thickness: 38 mm Overall width: 1,725 mm Total depth: 750 mm Possible delivery time: 10-12 weeks Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Table drilling unit W 100 A Manufacturer: TOS Varnsdorf overhauled: 20125 Spindle diameter ... 100mm Axis X ... 1600mm Axis Y ... 1120mm Spindle speed ... 7-1120 rpm. Axis W ... 900mm Axis Z ... 1250mm ISO 50 Max table load ... 3000kg L x W x H ... 6710 x 3450 x 3000mm Machine weight ... 14000kg Main Engine Power... 11kW Total power demand ... 17kVA Clamping table area ... 1250 x 1250mm Flat disc diameter... 600mm Max circulation diameter ... 900mm The machine is possible to test under electricity, with one-year warranty.
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmMax. Turning Length1200 mmBar diameter max.65 mmTurning diameter500 mmWork spindle (left)Diametre of spindle nose170h5 mmSpindle noseFlat flange Spindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 ...
Assembly table, workbench with 2 side material compartments. (Picture 1..) Very robust industrial goods with the dimensions 244cm(L) x 70cm(W) x 78cm(H) Square 30x30xmm tubular steel frame. (Pictures 2 - 4) 16mm laminated board with a work surface of 150x70 (60) cm (picture 5..) 2 material compartments with 56cm(L) x 42cm(W) x 72cm(H) each. Edging with laminated board 8mm. Also suitable for very high loads – see Figure 6 loaded with steel moulds approx. 500 kg. Quantity: 5 pieces Price: 299,- Euro VB per piece If you buy all 5 tables, a special price of 1,250 euros VB applies Small flaw: The worktops have some small holes. These were needed for the assembly of fixtures. This probably hardly affects the strength of the panels. Delivery from the factory. Assembly table, workbench with 2 lateral material compartments. (Image 1..) Very robust industrial ...
Tables for hydrsulic press for clamping on the stump or for the edition on the table. Multiple available. The tables are from a 420to press with installation height 1,250mm The round tables have a continuous opening in the middle. More data and photos on request
Two unused tables from paller horizontal borer Skoda W180NC 2240x2240cm of clamping surface and the weight of one table is 6500kg
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaTurning diameter500 mmSwing diameter over guide ways500 mmMax. Turning Length1200 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power (100% ...
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power (100% ...
ACKLEY TABLET PRINTING MACHINE, MODEL 01511-00038 Year of construction: 2016 Precision rotogravure printing system for tablets and capsules. For pharmaceutical, nutraceutical and confectionery products. Perfect for mid-sized productions. CHARACTERISTICS • adjustable ramp Feed Angle, based on product flow characteristics • continuous motion, multiple-lane carrier bar conveyor feed system that exposes the top surface of the product for inspection and printing • safety enclosure with interlocked doors and enclosed beam path • quick changeover of 60 minutes • requires only compressed air and power for operation • user friendly Operator Control Interface with 17” touch-screen HMI • programmable settings for up to 50 products PRODUCTION • Output: Up to 150,000/h • Printing: alpha-numeric text or graphic logos; can print with solvent or water based ink solutions ...
FETTE TABLET PRESS 2090 Year of manufacturing: 2003 High speed tablet press. Operating area enclosed within four double walled Perspex safety guards. double walled Perspex safety guards • the product to be filled is placed in a stainless steel hopper and guided through a Fill-O-Matic motorised powder feeder into the mould cavities, which can be easily dismantled for cleaning • can be connected to an external dust extraction system via connection ports in the upper part of the housing PRODUCTION • works with interchangeable moulds • can produce capsule shaped tablets • Production: 216,600 tablets/hour (max; with turret installed) • Tablet dimensions: up to 25 mm Ø (max) • Tablet thickness: 8.5 mm (max) Number of stations: 29 • Compression: 100.0 kN (max) • Pre-compression: 100.0kN (max) • Filling depth: 18.0 mm (max; with suitable cam) • Rotation speed: ...
TABLET PRESS MANESTY BETAPRESS N° of stations: 16 Operating pressure: Max. 6.1/2 Diameter of punches: 19 mm Length of upper punch: 133.6 mm Length of lower punch: 133.6 mm Max. mechanical speed: 90.000 Height of machine: 160 mm Floor space occupied: 584 mm x 851 mm Approx. weight of machine: 695 Kilos
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmMax. Turning Length1200 mmTurning diameter500 mmBar diameter max.65 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 ...
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 100 mm - B-axis ±110° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 5 bar; 20l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor - USB interface, Ethernet interface; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length750 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range- 5000 rpmDrive power (40% DC)32 kWMax. torque (40% DC)360 NmC-Axis Speed-5000 rpmTorque of C-Axis (holding torque)280 NmT ...
Soco System packing station system 14800mm Double Deck Roller Conveyor with 800mm Steel Rollers Lower roller conveyor with drive Upper roller conveyor without drive (gravity roller conveyor) 9850 mm Roller conveyor with plastic rollers 600 mm Ø 48 mm with drive and two continuous flaps Curve with conical rollers 90° with two drives for high loads 6000 mm roller conveyor with plastic rollers 600 mm Ø 48 mm with drive 9750 mm Roller conveyor with plastic rollers 600 mm Ø 48 mm without drive 6 x Rocholz Packing and Work Tables System Flex Cardboard magazine Workplace lighting Keyboard and mouse tray with articulated arm Monitor mount with articulated arm 10-way power strip Perforated back panel PC mount Shelf Width 2000 mm Depth: 800 mm 6 x 1000 mm transfer roller conveyor, 600 mm steel rollers 6 x 1000 mm transfer roller conveyor, 600 mm plastic rollers ...
Cast iron beds Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T
• Height: 850 - 1000 mm • max length: 2400 mm (extendable) • max. static support load: 225 kg • Dimensions (LxWxH): 1600 x 600 x 850 mm • Weight: 30 kg • Electrical connection: 230 V / 50 Hz • for crosscut saws, belt grinders, cutting saws, etc. • Installation and adjustment without tools • foldable feet for space-saving storage or transport • Quick clamping ssystems enable quick conversion, e.g. for cutting down long workpieces The list price for this work table is € 139.00 (plus VAT). (Changes and errors to technical data and prices reserved!)
Originates from a European pharmaceutical leader in contract development and manufacturing (CDMO). 2x units available Working Description King TB-4 semi-automatic tablet, capsule and pill 2-channel counter with electronic counting mechanism, of a convenient compact bench top / tabletop design; maximum output – for tablets: up to 2000 tablet/minute (with 5mm tablet DIA); for capsules: up to 1200 capsules/minute. Comes with 2 Filling Stations. Single operator required only. Finished in polished finish stainless steel. Product hopper with top cover and vibration frequency control of product onto the feed chute (with adjustable height out-feed control plate). Mounted onto a stainless-steel frame. The TB-4 model is a benchmark standard machine in Pharmaceutical, Medical and Nutrition and is an extremely versatile and accurate tabl ...
Pull-off table after gate roller aisle left - right drop 6 meters long 3 meters wide
Tool benches, tool cabinets and cassettes directly from the manufacturer
Manesty Drycota 900 23 Station Double Headed Tablet Press with Type D Tooling • This Double Headed Tablet Press is Mounted on a Common Chassis Plate and Driven via Line Shaft by a Common Drive • Twin Single Compression • Turrets Are Each Fitted With 23 Type D Stations • Upper Keyed Tooling • Removed Side Attached Operation Control Panel N°. of Stations: 23 Voltage: 400 VOLTS Frequency: 50 HERTZ Phase: 3
Key data: 600 mm, 200 mm
Machine : Rigid angle tables for milling machines Make : EMCO unused – slight traces of storage Clamping surface : 600x200mm, 4 T-slots 12mm, spacing 45mm Vertical: Hole spacing: 90mm/390mm, for T-slot 12mm Dimensions: Length :60cm ; Width : 20 ; Height : 18cm; Weight: 44 kg PRICE : € 480,- Even larger MAHO or lids, ... Mounting plates: A - Length : 240mm ; Width : 120mm ; Height : 35; 3 T-slots 11mm spacing 45mm, (1x) PRICE : € 100,- B - Length : 420mm ; Width : 125mm ; Height : 46; 2 T-slots 11mm spacing 90mm (4x) PRICE : € 100,- C - Length : 520mm ; Width : 180mm ; Height : 56; 3 T-slots 12mm spacing 45mm (1x) PRICE : € 150,- D - Length : 600mm (660); Width : 180mm ; Height : 75; 2 T-slots 12mm spacing 90mm (3x) PRICE : € 180,-
used
Automatic 12 track counter for packaging of tablets, caplets or soft/hard capsules. Speeds of 10 to 60 containers per minute, depending on materials and application.
Universal - Swivel - Tilting table for MAHO MH 1000 Clamping area: 1050 mm x 630 mm The Universal - Swivel - Tilting Table is in good condition
Rotary tablet press SPT- TP500D with double-sided press; Brvyulnw 2 layered production; Touch screen, PLC Control Panel; HMI (Human Macshine Interface); SPT-TP 500D Number of stations (Max.) D=41 B=49 BB=59 1 Max tablet ejection (two-sided) T/h 270 000 360 000 420 000 Max tablet ejection 2 layer T/h 90 000 115 000 140 000 2 Max.Tab.Diameter Round mm 13 16 25 Form 14 19 25 3 Max tablet thickness mm 8.5 4 Max main pressing force t 10 6 Dimensions mm 1150 x 1550 x 1950
IMA KILIAN PRESSIMA (mint condition, just over 100 operating hours, year of construction 2007) Accessories include a multi-tool set (5 × 4 mm) (new price: €12,000, 6 months old) and a single tool set (5 mm) Optionally, a control retrofit can be carried out with a Siemens S7-1200 and a Siemens TP panel. Tablet press as in the delivery condition, as new, with complete documentation, functional software etc. ! The IMA KILIAN PRESSIMA tablet press is a compact, universally applicable press for R&D. Thanks to its small dimensions, the PRESSIMA can be easily installed even in small spaces. Tool and die system The PRESSIMA has a replaceable die disc. This means that B or D tools can be used (EU or TSM standard). Operation and display • The PRESSIMA can be equipped with a measurement of the main press force including a digital display on the machine panel for the production of s ...
Rotation tablet press SPT-TP 400 with high production capacity; Touch screen, PLC Control Panel; HMI (Human Macshine Interface); SPT-TP 400 Number of stations (Max.) D=30 B=36 BB=45 1 Max tablet ejection/hour T/h 125000 170 000 215 000 2 Max.Tab.Diameter Round mm 13 16 25 Mould mm 14 19 25 3 Max tablet thickness mm 8.5 4 Max main pressing force t 10 5 Max pre-press force t 2 Hqgonxsno 6 Dimensions mm 1000 x 1230 x 2000
GeneralUniversal Milling Machining Centre - Linear pallet changer with 2 pallets - Coolant tank 2,500 lt / 660 gallon - Chip conveyor - Rotating clear-view window - Electronic handwheel; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical60000/30000/40000 mm/minRapid traverse longitudinal/transverse/vertical60/30/40 m/minWorking area 1Longitudinal3400 mmCross3400 mmVertical2000 mmTool changerType of magazineWheel Tool changer planevertical Type of gripperDouble gripper Clamping surface: 2,000 mm x 2,500 mm / 78.7 in x 98.4 in (DIN 55201 - A2) centre bore: d 100 mm H6 / d 4 in H6 level bush: d 25 mm H6 / d 0.9 in H6 Number of T-slots: 1x 22 H7 (alignment groove, table centre) 8x 22 H12 (clamping grooves) Distance betweeUniversal head with controlled B-axisContinuously positioning universal milling head (B axis) with integrated motor spindle for ...
GeneralUniversal Milling Machining Centre - Linear pallet changer with 2 pallets - Coolant tank 2,500 lt / 660 gallon - Internal coolant supply 40 bar / 580 psi through spindle centre (AD) - Chip conveyor - Rotating clear-view window - Electronic handwheel; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical60000/30000/40000 mm/minRapid traverse longitudinal/transverse/vertical60/30/40 m/minWorking area 1Longitudinal3400 mmCross3400 mmVertical2000 mmTool changerType of magazineChain Tool changer planevertical Type of gripperDouble gripper Clamping surface: 2,000 mm x 2,500 mm / 78.7 in x 98.4 in (DIN 55201 - A2) centre bore: d 100 mm H6 / d 4 in H6 level bush: d 25 mm H6 / d 0.9 in H6 Number of T-slots: 1x 22 H7 (alignment groove, table centre) 8x 22 H12 (clamping grooves) Distance betweeCabineFull protection cabinExtension Z travel range to 2 ...
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 ...
Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.65 mmGeneral- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Work spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle speed-12000 rpmSpindle ...
The small rotary tablet press SPT-TPL 200 (small scale production); Touch screen, PLC control platform; HMI system; Bczkcapdbh The machines comply with the requirements of the GMP guidelines and are CE certified; Number of stations (Max.) D=13 B=16 BB=19 1 Max tablet ejection/hour T/h 46 000 57 000 68 000 2 Max.Tab.Diameter Round mm 25 16 13 Shape mm 25 19 14 3 Max tablet thickness mm 8.5 4 Max main pressing force t 5 5 Max pre-press force t 1 6 Dimensions mm 600 x 1106 x 1705
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power (100% ...
Tuttnauer T-Edge 10 W Tabletop Autoclave The T-Edge 10 and T-Edge 11 are space-saving benchtop autoclaves that give you high-speed, Class B performance. You'll save time so you can help your patients while meeting current international standards and regulatory requirements to protect your staff and patients. Fully automatic autoclaves that give you time to treat your patients. The T-Edge 10 and T-Edge 11 autoclaves operate daily without interruption, providing efficiency and safety. User-friendly touchscreen control panel. Quickly view programs, cycle times, water levels, and more. Advanced documentation and traceability options. For security and regulatory reasons, scan barcode data (including expiration date) for the patient record during treatment. Personalized username and password Printouts to store printouts (optional printer). Sophisticated data analysis capab ...
GeneralUniversal Machining Centre Vertical headstock Tool change system double gripper NC-Swivel rotary table with pallet carrier 3 pallets 500 mm x 500 mm / 19.7 in x 19.7 in T-slots according to DIN 55201-A2 linear pallet changer coolant tank 500 l / 132 gallon chip conveyor with netting band filter integrated, coolant ring jet; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmFloor space/WeightWeight approx.17800 KgDirect measuring systemDirect path measuring systemCabineFull protection cabinPackage Mill / Turn HSK-A 63Package Milling / Turning: Upgrade NC-swivel rotary table to Milling - Turning / direct drive Pallet C-axis d 630 mm / 24.9 in Speed C-axis 1.000 rpm Integrated balancing sensor ...
GeneralUniversal turning-/milling center; Control: CELOS X with Siemens SINUMERIK ONE Working areaSwing diameter over guide ways580 mmTurning diameter550 mmMax. Turning Length1600 mmBar diameter max.104 mmWork spindle (left)Spindle bore118 mmSpindle diametre on front bearing160 mmMain drive 1Drive power (100% DC)32 kWDrive power (40% DC)36 kWSpeed range- 4000 rpmBench speed510 rpmTorque (100% DC)600 NmMax. torque (40% DC)720 NmTurning-milling spindleSpindle speed-12000 rpmDrive power (100% DC)8,8 kWDrive power (40% DC)10,5 kWSpindle taperHSK-T 63 Torque (100% DC)73 NmTorque (40% DC)90 Nmlocking moment800 NmSwivelling range+/- 120 degreeTool magazineType of magazineChain Number of tools30 Max. tool diameter78 mmMax. tool-Ø with free adjacent pockets130 mmCounter spindle ISM 102, A2-8Counter spindle as integrated spindle motor, ISM 102, A2-8 - Drive power 32/36 kW (S1-100%ED / S3-40%ED) ...
Hamilton FLOW PCR Setup Instrument The Hamilton FLOW PCR Setup Instrument is a benchtop robotic workstation for fully automated preparation of PCR and qPCR reaction approaches, designed to minimize manual pipetting errors and increase sample throughput. It is typically used in conjunction with Roche Life Science products (such as the MagNA Pure 96 System and LightCycler® 480 Instrument) as part of the FLOW solution. Features and Specifications The Hamilton FLOW PCR Setup Instrument (PSU) is characterized by its precision and ability to integrate into automated workflows. Automation: It automates the pipetting and distribution of PCR components (samples, master mixes, primers) in 96- or 384-well PCR plates. Volume range: The hardware is designed for aspiration and delivery of volumes up to 1 ml. Traceability: It has automatic tracking of barcodes on accessories and con ...
Table belt grinding machine Hunziker L x W x H: 3.5 x 1.7 x 1.7 m The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Table circular saw Schelling SKR with SUVA protection with stop Bösch L x W x H: 2200 x 1800 x 1100 mm Weight approx. 750 kg Built in 1973 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Roller conveyor / work table / conveyor technology with drive Model: Flat Belt Condition: Used Year of Make: 2013 Manufacturer: AMI Fördertechnik Total length: approx. 3250 mm Total width: approx. 540 mm Conveyor width: approx. 465 mm Castors/ center distance: approx. 125 mm Steel frame Frame height: approx. 120 mm Frame width: approx. 35 mm Colour: Light grey Including 2 SEW motors (0.37 KW) Including side guide Feet to be ordered separately Stock: 10 pieces Price per piece Internal Article Number: 2026021902 Features: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Pick-up address: Industriestraße 5 (47918 Tönisvorst) The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, ...
maximum number of results exceeded
please refine your search
