glass cut used for sale

Cutter K+G Wetter CutMix 120 STL with load for 120 liter standard car and ejector, 120 liter cutter, surface, bowl lid with storage wall and bowl stainless steel, noise protection lid, knife shaft brake, main switch, membrane keyboard, infinitely adjustable knife shaft speed (40-4,400 rpm), infinitely variable bowl speeds (5-18 rpm), infinitely adjustable mixing gear backwards (40-500 rpm), digital display knife shaft temperature bowl, rated power 42.5 kW, K+G weather CM 120 STL

2 knife speeds 2 mixing speeds 2 separate bowl speeds emptier With loader Auto command 3000 K yoc 2017 only 1.603 running hours 125 kW total connected power

Used machine CNC cutter/plotter cutting surface in X and Y: 3,500 x 2,100 mm Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine: • 1 cutting bridge and 1 multifunction tool head The machine is sold with a driven round blade, electrically oscillating knife and a milling machine (incl. suction device) • Multifunction tool head for holding up to 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with grey conveyor table (conveyor) as standard. Green-blue exchange conveyor possible (offers high contrast for dark materials) Other tools can be expanded (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven round blade • UCT universa ...

Cutter Manufacturer: Krämer Grebe Wetter Stainless steel Capacity: 65 liters 2 knife speeds 6 knives Power: 25kW

Frozen block cutter Manufacturer: Magurit Stainless steel Cutting dimensions: maximum cutting size 750 x 480 x 240 mm Motor: 4 kW hydraulic Power: 400 V / 50 Hz Dimensions: 1700 x 1100 x 1850 mm 3 knives

CFS CUTMASTER 325V & 500V

Hydraulic stainless steel freezer block cutter (guillotine) with loading for meat/fish/vegetables/cheese. NEW MACHINE IMMEDIATELY AVAILABLE FROM STOCK 2 pieces cutting knife 5 pieces cross cutting knife Cutting room: 460 x 220 x 750 mm Cutting temperature: up to -25° C Cutting capacity: up to 1,600 kg/h Push button control Hydraulic loading Machine dimensions: Width: 90 cm Length: 220 cm Height: 185 cm Weight: 550 kg Connection: 5.0 kW Voltage: 400 V, 50 Hz CE mark: yes

HITACHI WIRE EDM MACHINE MODEL MS 250 H-CUT 8Q X-AXIS STROKE: 1030 MM Y-AXIS STROKE: 810 MM Z-AXIS STROKE: 530 MM

AFT Sandwich cutter Stainless frame, belt dimensions 2200mm x 150mm, manual wheel to set product height, 3Ph, mobile

Glue binder cross saw Width 3200 mm (saw path) Saw blade diameter 900x50 Little worked !

Complete Log Cut-off Saw Manufactured by Raute

GERBER Cutter Z7 automatic cutting machine was built in 2016 in China by Gerber Technology (Lectra). The machine is used in the production of clothing and all sewing products. It can cut both single and multi-layered fabrics with a maximum thickness of 7.2 cm (after compression). Cutting is performed by means of a robust, vertical oscillating knife, which ensures the highest cutting precision and shape repeatability regardless of the type of material. The advanced Knife Intelligence Plus” system controls the movement of the knife, changing its angle, cutting path and acceleration in real time to ensure precise cutting of repeatable parts for all layers every time. Cutting paths are additionally optimised by the SMARTbite system, which automatically adjusts the knife advance speed based on the height and type of overlap. The oscillating knife is continuously sharpened during cutting, ...

Corner cutting Krause

Rex hydro cutter 65 liter Outside of machine made of special stainless steel 65-liter bowl 2 mixing speeds 2 bowl speeds – fast and slow Main cover is made of special steel, stainless steel Noise-canceling cover made of special plastic Distribution cabinet made of special steel, inside the machine 6 pieces Knives Machine dimensions in cm: width: 135 depth: 90 height: 130 Main motor power: 18 kW Voltage: 400 V, 50 Hz Delivery time: 10 working days after advanced payment

for frozen meat blocks

PVS 125 H Micro-cut Drive 15 KW 400 Volt 50 Hz Horizontal design with trrichter Funnel volume approx. 120 liters

REF-1059 CRM NEXUS 220 CHOP CUTTER Manufacturer: C.R.M. Model: NEXUS 220 Year: 2003 All stainless steel Power: 4 kW Voltage: 400 V / 3-phase Mobile on casters Max. product dimensions: length 100 cm, with 22.5 cm, height 27 cm Overall dimensions: length 221 cm, width 85 cm, height 136 cm

welding current: 20 - 60 A cutting capacity: 1 - 20 mm open-circuit voltage: 104 V Required air-pressure: min. 4 bar connected load: 7,9 kW connected load frequency: 400 V weight: 16 kg Dimensions (LxWxH): 480 x 260 x 360 mm Digital display. Surge protection. Plasma torch. Earth cable. Reducing valve with moisture separator. Equipped with IGBT technology Delivered without CEE plug. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Merkle Slitter Cutting width 1m Overall dims: 1.4m wide x 700mm deep x 1m high Weight: 500kgs

Merkle 500mm wide Slitter

speed of feed:: 50 m/min feed:: 5 - 99.999,9 mm cuts max.:: 70 - 80 Schnitte/m cross-section width:: 40 mm cross-section heigth:: 40 mm Condition: NEW, Specification: Hose and corrugated pipe cutting machine electric cutting machine - Cutting unit: Window cut with cutting bushes - Material diameter approx.: 4 - 40 mm - Transport by two drive belts - Max. distance between the belts: 45 mm - Belt adjustment via motor, adjustment via control panel - Belt adjustment via the centre - with a maximum speed of approx.: 50 m/min - Electrical contact pressure of the drive belts - Electronic length measurement from 5 - 99,999.9 mm Digital display - Step change: 0.1 mm - Cutting via electric motor - Quantity selectable: 1 to 99,999 Display digital - Cutting capacity approx.: 70 - 80 pieces/min at 100 mm l ...

Manufacturer: Ruhle Type: Frozen block cutter Model: GFR 450 Infeed dimensions: 450 mm x 330 mm Knife width: 450 mm Total dimensions: 1700 mm x 700 mm x 1450 mm Voltage: 400 V, 3 Ph, 50 Hz Power: 5.5 kW, 16 A

John Marshall Cutter

Autogil Cutter

New Zig-Zag Cutter! Machine is designed to cut an 800mm Batch into an endless strip for Extruder feeding. 12 month Warranty! Description attached!

1 x Polar 115X guillotine, equipped with : air table, 2 side tables, 2 knives, photo cells, program 1 x Polar RA-4 jogger 1 x LW 1000-4 stack lift 1 x TR-130 unloader

Machine: Cut 25 line Manufacturer: Alpma Type: Cut 25 Year of manufacture: 2003 the Alpma Cut 25 line consists of: Alpma CUT 25 cutting machine Boekels piece scale Auto. Discharge for underweight pieces (cut or section) Auto. Discharge for overweight pieces (first cut or cut-off) Belt for 90° rotation of pieces Accumulation belt/intake belt for downstream form fill and seal machine The line was fully functional and had no defects. It was always maintained. the Boekels is installed on the right (after the CUT 25 cutting machine). Flow direction is from left to right. Documentation is available. Knife width 250mm Max. bar length approx. 800mm 120 cycles/min. A checkweighter is also still available if needed The line is dismantled and stored. If you are interested, you are welcome to inspect the line. Find more here - /

HolzHer Cut 110 for sale. the complete computer has been exchanged and the software has been updated (2022) the guides of the material pusher and saw carriage have been exchanged (2023) A second blower for the air tables has been installed and an additional table has been added. mint condition dismantling is buyer 1 shift operation run and not really loaded. The machine is "freshly" made. Gear stems from the slider + guides have recently been replaced. Bearings and guides are new and computer is new. the whole rebuild cost 40k to 50k Technical data and description: Basic machine pressure beam saw Design: fence right Sawing cycle: away from fence Cutting length: 5850 mm Cutting width: 5850 mm Saw blades Main saw blade Ø 400 X 4,4 X 30 mm, Z72, FZ/TZ (not included!) TCT scoring saw blade Ø 180 x 4.4/5.4 x 30 mm conical (not included!) Cutting height Cutting height: 110 ...

Used machine CNC cutter/plotter cutting surface in X and Y: 3,500 x 2,100 mm Multifunctional CAM cutting system in CNC knife technology for the 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunction tool head The machine is sold with a driven round knife and a punching tool. Mu3Vqs • Multifunction tool head for holding 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with grey conveyor table (conveyor) as standard. Green-blue exchange conveyor possible (offers high contrast for dark materials) Other tools can be expanded (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven round blade • UCT universal knife (drawing knife) • KCT Kiss-Cut Tool  ...

Key data: 2000 mm, 1300 mm

available Berstorff Bias Cutter Angle 0-50 degrees with manual splice 90 degree with automatic splice Ce certified Description attached!

1 x Wohlenberg 132 guillotine equipped with : air table, 2 side tables, 2 knives, photo cells, program 1 x Baumann BA 3 MAN unloader 1 x Baumann BB5 stack lift

1 x Wohlenberg 132 guillotine, equipped with : air table, 2 side tables, 2 knives, photo cells, program 1 x Baumann BA3 unloader (year 2008)

Unit for precision cutting Make: IMA

2 independently working cutting bridges 2 working zones (1750x1000mm each) High-performance vacuum turbine X servo drive; Y and Z axes 2 high-luminosity projectors Windows 7 operating system Calculator with CNC interface, modem and Ethernet card

CUTTING LINE - refurbished - consisting of 1) Polar137EM-MON AutoTrim = Cutting LINE 2) Unloader/palletiser TR TR1 EL145-1 LH standing 3) Jogger RA-B-5 with air removal roller 4) Paper Lift Full description of Equipment on request

welding current: 15 - 40 A cutting capacity: 1 - 16 mm open-circuit voltage: 96 V Required air-pressure: min. 4 bar connected load: 3,6 kW connected load frequency: 230 V weight: 9,0 kg Dimensions (LxWxH): 371 x 153 x 232 mm Exhibition machine Inverter plasma cutter with accessories: Cutting torch with 4 m cable, earthing clamp with 2.5 m cable, air pressure gauge, Mask and brush. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Schneidmaschine / Guillotine Wohlenberg CUT-Tec 92 Year 2007 - Serial-No. 3932-009 Schnittbreite max. 920mm / Cutting width max. 920mm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives Sehr guter Zustand - in very good Condition

x-axis: 550 mm y-axis: 350 mm z-axis: 400 mm U-axis: 550 mm V-axis: 350 mm volume: 1200 L inclination: +/-30°/400 mm dimensions: 1200x700x400 mm weight: 1500 kg wire dia.: 0,10-0,33 mm Bobbin Weight max.: 25 kg total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Bacci Model: MASTER/CUT Year of Manufacture: 2012 Voltage (Volts): 380 V Frequency (Hz): 50 Hz Power (Kw): 24 kW Weight (Kg): 6000 kg Find more here - / Contact us at -

Manufacturer: MITSUBISHI Model: Laser Cutting Machine Year of Manufacture: 2017 3000×1500 mm Power: 2.7kw Technology: Co2 2 changing tables AVAILABLE: immediately Find more here - / Contact us at -

Wohlenberg 155 CUT-TEC Reference No.: CU-001414 cutting-Line 2000 width 155 cm with monitor programmable air table side air table Baumann Jogger BSB 6L Baumann Unloader BA 6N complete line regular service in production available: 08/25 located: Germany

Central and lateral air tables Light guards Chromed tables Digital program

A CNC cut-off grinding machine Anthratec, previously used for cutting grids, is available. Cutting speed at 2000rpm: approx. 42m/s, speed range: 500–3500rpm, connected load: 30kW, control: Siemens S7-1200. Documentation available. An on-site inspection is possible.

Height=0.7 m, Overall length= 0.35 m, Overall width= 0.5 m,

Height=1.3 m, Overall length= 1.1 m, Overall width= 1.6 m, Net weight= 1195 kg,

Height=1.34 m, Overall length= 0.73 m, Overall width= 1.39 m, Net weight= 325 kg,

Fully automatic sheet dispenser PAL-Cut 800 The Palcut 800 cuts paper quickly and precisely into intermediate sheets of the desired length, directly from the roll. Fully automatic sheeter PAL-Cut 800 sheet dispenser, which cuts intermediate layers quickly and precisely in the desired length. The sheet dispenser is suitable for continuous operation in an automatic palletizing system and for companies with high sheet consumption. The Palcut 800 works with rollers of max. 800 mm width. Type designation: PAL-Cut 800 Length: 1853 mm Width: 1380 Height: 1739 for roll width up to: 800 mm Mounting height: 1,368 mm Working speed: 480 pcs/h Power connection: 220 V, 0.18 kW Operating mode: fully automatic Weight: 370 kg Link PAL-Cut 800 More items - new and used - can be found in our shop! International shipping costs on request!

Max workpiece size 1030x800x350 mm Table size 950x630 mm Can be inspected under power

A water jet cutting system Expert Systemtechnik with a high-pressure pump BFT is available. 1) Cutting system Expert Systemtechnik cutEXPERT variojet, year of manufacture: 2020, product: leather/foam materials/technical textiles/rubber materials/composite materials/packaging material, max. cutting speed: 70m/min, repeat accuracy: +/-0.2mm, water consumption: approx. 0.2l/min, cutting dimensions X/Y: 1800mm/3000mm. 2) High-pressure unit BFT Servotron 40.45+, year of manufacture: 2020, drive power: 45kW, max. flow rate: 4.6l/min, design pressure: 4200bar, max. operating pressure: 4000bar. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1400mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible.

Main technical parameters: 1. Production capacity: 3000kg/h Total power: 11kw material channel width: 540mm Material channel height: 240mm Cylinder stroke: 700mm Gas source pressure: 4-6 kg/cm 2 Processing raw material meat specifications: 700 × 520 × 200 (mm) Weight: 800kg External dimensions: 2150 × 1030 × 1220 (mm)