glass cut used for sale

SEYDELMANN KontiKutter KK 140 AC6, in very good condition

Seydelmann K 60 AC, very good condition

130 litre ALPINA SWOPPER SW 130-S checked function, loader,unloader

ALCO Tiler ASP 400 HDI fully refurbished

Cutter Mado MSM 764 SL, 50 litre bowl, completely in stainless steel, built in 2014, Stepless knife shaft up to 5000 rpm, mixing cycles, 2 bowl speeds, 3 cutter head, connection 400 V, 32 kW, Dimensions LxWxH approx. 125x100x115cm, weight approx. 768kg, very good used condition, fully functional

Height 1550 mm Width 2950 mm Length 1750 mm Weight 4100 kg Capacity 200 l Electrical Supply: 400V 50Hz 3N Total power 78 kW Main Material Stainless Steel, Acid Resistant Cutter type Vacuum bowl cutter Construction of the cutter bowl Stainless steel, acid-resistant Number of knives on the head 8 pcs. Vacuum cutter. Additional functions for heating or cooling the bowl

The pictured cutter is sold by MADO of the type Garant MSK760 H II with a volume of 35 litres. The cutter is made entirely of stainless steel, it has a 6 mm cutter head with an additional spare blade set and comes with an operating manual. The cutter has the following technical data: Bowl volume: 35 litres Number of knives: 6 Speed: 1750-3500 rpm Bowl speed: 12/24 rpm Knife shaft power: 9/11kW Voltage: 400V Fuse: 32A (slow-blow) Dimensions: 1240x890x1130H (1240x1260x1740H with lid open) Footprint: 1040x550mm Weight: 430kg Keys for the cutter head and documentation are part of the machine The machine runs neatly and smoothly, video of the test run available Only the noise protection cover has a crack, but this was professionally glued by the previous owner.

Cutter Capacity: 25 liters Voltage: 380V / 50Hz / 3 phase Power: 1.5kW Speed: 1000-2000 rotating/min Dimensions: 85x67x70cm Packing size: 93x78x71cm With a temperature probe and the net

Kilia TK20 Table Cutter 20 litre solid stainless steel bowl 2 courses 6 mm cutter head Spare blade set and fork locks included 400V Stainless steel housing smooth and smooth running, video of test run available comes from a gastronomic business in which meat loaf was made with it

Stephan UM/SK 60 E Universal Machine for the production of processed cheese, convenience products, vegan spreads and confectionery. Mounted on a stainless steel frame. The bowl is equiped with a double jacket for heating/cooling on the jacket, 2x direct steam injection nozzles for direct injection of (culinair) steam inside the product, temperature sensor inside the product, cutting blade, maximum working pressure in the bowl -1/- bar (protected with overpressure valve), maximum temperature in the bowl 95 °C, maximum temperature in the jacket 95 °C, vacuum connection on the bowl, dearation connection on the bowl, infeed connection on the lid with a hopper with a pneumatic valve for adding powders, mounted on the lid a scraper agitator for the wall, electric driven (0,37 kW - n2: 39 rpm), 1 manual tightening clamp, pneumatic outfeed valve for the product, so not needed to tilt the bowl  ...

This cheese dividing machine disposes of a manually rotated turntable. This offers the possibility to cut cheese loaves and rings in segmental portions (wedges) as well as cheese loaves and bars in sticks with freely selectable stick width. Diameter of the rotated turntable: 100 cm. Cutting knife length: 105 cm. The machine is previously used for Gouda cheese loaves, Butterkäse and Tilsiter cheese (1-2 kg loaves). Light screen protection (Sick). Control panel with PLC control. Spare knife available., Type of Machine: Cheese dividing machine, Capacity: up to 40 cuts/min, Max size of the cheese: 100 x 100 x 25 cm, Total dimensions: 260 x 155 x 230 cm

Stephan Combicut TK 850 Mixer / Universal Machine for the production of bakery products, convenience products, vegan spreads and confectionery. Previously used in the chocolate production. Machine frame, bowl with slides, lid and side covers are all made of stainless steel. The bowl is equiped with a single jacket, 3x twin cutting blades, overpressure valve, bowl volume: 870 liter, hydraulic slide gate infeed and a valve connection infeed on the top for main product, at the bottom a hydraulic slide gate discharge for outfeed of the ready product (hydraulic controlled), 3x connections for pneumatic controlled ingredient valves on one side of the bowl (including 2x pneumatic valves) and 1x connection for pneumatic controlled ingredient valve on the other side of the bowl (including 1x pneumatic valve). Single jacketed lid with scraper of the wall (electric driven ± 25 rpm), 3x manual tigh ...

Spare parts for different Stephan UMM/SK - TC/SK Universal machines. The lot of spare parts is existing out of:, - 4x Springs., - Several steam injection nozzles and components., - Temperature indicator., - Knife nut., - Several scraper blades., - Gummies., - 9x Used Stephan 80 knifes., - 2 New Stephan 80 knifes., - 2x Used Stephan 25 or 40 knifes., - 4x Manual clamps for fixing the lid., - Vacuum chamber., - Filler bushings Stephan TC/SK 600., - Part of a pneumatic outfeed valve., - 4x Sieve plates., Type of Machine: Universal machine

Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, roller milling cutter, milling cutter, hob cutter, spline shaft hob cutter -Manufacturer: WMW PWS, 17 hob cutters -Hole: Ø 27 mm 4 pieces, Ø 32 mm 7 pieces, Ø 40 mm 6 pieces -Different types: see photos, more pictures can be sent -Price: complete -Dimensions: 400/400/H150 mm -Total weight: 52.5 kg

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter, angle milling cutter, shell angle milling cutter -Cutter head: face milling cutter SK50 with extension -Type: Ø 140 mm -Recording: SK50 -Dimensions: Ø 140 x 335 mm -Weight: 13.1 kg

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter, angle milling cutter, shell angle milling cutter -Cutter head: face milling cutter SK50 -Type: Ø 140 mm -Number of teeth: 12, without indexable inserts -Hole diameter: 40 mm / bolt circle diameter 66 x 14 mm -Dimensions: Ø 173 x 60 mm -Weight: 5.0 kg

Gear cutters, module cutters, hob cutters, tooth form cutters, module milling heads, end mill cutters, roller cutters, milling cutters, hob cutters, splined shaft hob cutters, gear hob cutters, slotted hob cutters, rack cutters -Manufacturer: Fette, Gear Hobbing Cutters, 6 pieces -Type: Mod.4 R1 EW 20° see photos -Hole: Ø 32 mm -Price/Sale: complete -Transport dimensions: 370/190/H110 mm -Total weight: 16 kg

Thread cutting machine, pipe thread cutter -Manufacturer: Rothenberger, Thread cutting machine type Supertronic 2SE without thread cutting head -Pipe size: 1/2 to 2 inches -Spindle bore: Ø 68 mm -Operating voltage: 230 volts -Speed: 40 rpm -Foot switch: with emergency stop function -Equipment: Pipe cutter, internal deburrer -Dimensions: 500/480/H370 mm -Weight: 46.6 kg

Gear cutter, module cutter, hob cutter, tooth form cutter, module milling head, end mill cutter, roller cutter, milling cutter, hob cutter, splined shaft hob cutter -Diameter: 63 mm -Height: 40 mm -Reach: 22 mm Quantity: 2x milling cutter fixing disc 650.054.06A SPAN. 5° EV4CO Price: complete -Sale: only complete set -Weight: 1.5 kg

End mill, end mill, cutter, shell cutter, milling head, angle cutter, shell angle cutter, angle end mill, prism cutter -Angle milling cutters: Attachment angle milling cutters, prism milling cutters -Type: Ø85 x 35 mm -Hole: Ø 27 mm -Quantity: 1x milling cutter available -Dimensions: Ø 85 x 35 mm -Weight: 0.8 kg

Gear cutters, module cutters, hob cutters, tooth form cutters, module milling heads, end mill cutters, roller cutters, milling cutters, hob cutters, splined shaft hob cutters, gear hob cutters, slotted hob cutters, rack cutters -Manufacturer: Reinecker, hob cutters, 2 pieces -Type: Ø 70 mm / Ø 67 mm KHSS-E -Hole: Ø 27 mm -Price/Fee: complete -Transport dimensions: 135/70/H70 mm -Weight: 2.1 kg

Seydelmann K 126 H AC 8 incl. loading very good condition

Table cutter Talsa K 15, NEW MACHINE, approx. 15 litres bowl capacity, Touch screen 10 inches, infinitely variable knife speed 750 - 3500 rpm, Stainless steel construction, solid cast stainless steel bowl, with removable 3-piece cutter head as standard, (optionally also available with a 6 mm cutter head) programmable, automatic stop according to time and/or temperature, Quality knife of BE machine knife, transparent noise protection cover in accordance with CE, closed lower case, Digital, electronic sausage meat thermometer, Easy cleaning, el. Connection 230V, 2.25kW

Well-maintained 90 litre cutter in stainless steel. Stepless speed, reverse mixing gear,

With possibility to add vacuumpump., Bowl: 44 litres, Capacity: max 30 litres, Knives: 3 speeds on knives, max 3000 RPM, Power: 3 x 400V, 50Hz, 5.5kW, Dimensions: 550 x 800 x 1200 mm, Weight: 150 kg

With BW200 loader and unloader, Bowl: 120 litres, Knife speed: variable speed, max 5250 RPM, Bowl speed: 2 speeds, Mixing speed: 2 reverse speeds, Controls: Command 1000K, Power: 3 x 400V, 50Hz, 87kW, Dimensions: 2200 x 2700 x 1700 mm, Weight: 2000 kg

Command 1000K controls, With lifter and unloader for 200L tote bins, Temperature sensor, Bowl: 200 litres, Knifes: 6 variable speeds, Bowl speed: 2 speeds, Mixing: 2 reverse mixing speeds, Power: 3 x 400V, 50Hz, 108kW, Dimensions: 2500 x 3000 x 1800 mm, Weight: 2900 kg

With unloader, water dosing and tempurate indicator, Bowl: 2 speeds, Knives: variable speeds, Steam: 1.5 Bar, 55 kg/h, Vacuumpump: Elmo 2BV2071, 125 m³/h, Power: 3 x 400V, 50Hz, 50kW, Dimensions: 1750 x 1950 x 2000 mm, Weight: 1700 kg

With double lifter for 200L tote bins and unloader, Bowl capacity: 750 litres, Knife speed: variable, 60 - 3300 RPM, Mixing speed: 150 RPM, Bowl speed: 4, 7, 10, 14 RPM, Power: 3 x 380V, 50Hz, 273kW, Compressed air: 6 - 10 Bar, Water: 2 - 6 Bar, Dimensions: 4330 x 3700 x 3050 mm (open lid), Weight: 7900 kg

With DGA33 control indicator, With unloader, Bowl: 120 liter, Speeds: 2 on knife, 2 on bowl, 2 mixing speeds, Power: 3 x 400V, 50Hz, 97A, Dimensions: 2050 x 1250 x 1250 mm, Weight: 1385 kg

Including unloader and BW200 loading device, With water counter, Bowl: 325 litres, 2 speeds, Knife speed: 6 steplessly programmable speeds, Mixing: 2 reverse mixing speeds, Controls: Auto-Command 1500K, Vacuum pump: Elmo Rietschle L-BV5, 200 m3/h, Compressed air: 6 - 10 Bar, Water: 4 - 6 Bar, Power: 3 x 400V, 50Hz, 157kW, Dimensions: 2600 x 3650 x 1700 mm, Weight: 4300 kg

Fully reconditioned Stephan universal machine for producing processed cheese, convenience products, vegan spreads and confectionery. Formerly used in melted and cream cheese production (also vegan). Machine bowl with top slide and a bottom valve. Framework, lid and side covers are all made of stainless steel. The bowl is equipped with a single jacket including all valves, 4x direct steam nozzles for direct injection of (culinary) steam into the product, temperature sensor in the product, 3x double cutting knives, max. working pressure in the bowl -1 / 0.3 bar (protected with pressure relief valve), maximum temperature in the bowl 95 °C, bowl volume: 300 liters, 1x hydraulic inlet slider at the top for the main product, including large funnel, 1x outlet valve at the bottom for the outlet of the finished product, 1x connection for pneumatics controlled ingredient valves on the side of the ...

With temperature indicator and central lubrication, Bowl: 60 litres, Bowl speed: variable speed, 2 - 15 RPM, Knives: variable speed, 200 - 6000 RPM, Mixing: 2 reverse mixing speeds, Power: 3 x 400V, 50Hz, 21kW, Dimensions: 1100 x 1600 x 1200 mm, Weight: 1325 kg

Seydelmann Bowl Cutter -Type: K 126 H AC 8 -Power: 86 kW -Capacity: up to 3000 kg/h -Bowl capacity: 126 liter -Continuous speed control -Maximum knife speed: 5250 rpm/min -Touchscreen control panel -Original electrical cabinet -Knife set included -Working hours: 1800 -Year of manufacture: 2016 -Cutter dimensions: 2650 x 1800 x 2300 mm -Cabinet dimensions: 1650 x 600 x 2150 mm -Made of stainless steel -Condition: Used in very good condition, ready to work

Various disc cutting wheels for oblique tempering from Lorenz. Technical details can be seen in the photos. 9 pieces in a set Auction-ID: A1-48483-23

Power Cutter Grinding wheel 250mm Speed 2880rpm Motor 1.1KW with various grinding wheels with vice and dial gauge stroke Coolant system Connection voltage 380Volt see pictures Condition: unchecked (6) Auction-ID: A7-48486-199

Sharp TC11 Table Cutter Volume: 11 litres very good condition completely in stainless steel 2 courses 3 cutter head Machine comes from a hobby butcher who gave up for reasons of age despite its good condition, the device must be thoroughly cleaned before use Video about test run available

Seydelmann K60

Technical data: Machine stand, Type 539 Band saw roll diameter 1400 mm Band saw roll width 180 mm Saw blade width max. 200 mm Saw blade length max. 9300 mm Saw blade thickness 1.3 mm Saw blade speed approx. 42 m/sec. Drive power 45 kW, (1500rpm) Cutting feed requires. 22.5 m/min -Incl. electrical equipment, consisting of limit switches for saw blade voltage, path limitation for transverse movement -2 electromechanical width adjustment devices with precision spindle and two-stage special drive - designed for connecting a Fraba digitizer 2800 -2 hydro-pneumatic band saw roller brakes

R21746/11 HOBEMA Cross cutter Model: 101 A Built: 1969 Working width: 700 mm Availability: by arrangement with collecting cylinder Available: by arrangement

<br>Tube length: 55-132 (165) cm Pipe width: 30-70 (80) cm 4 plies, photocell, 2 rear color printers<br><br><br>Verf Gbar: at once

<br>Flush cut and kicked end tuber with belt ri's system, 4-ply, photo cell, 0/2 or 4 end button color printer, range perforating system<><br<br>Verf Gbar: at once

R22352/11 SCHWALBACH Cross cutter Model: BS 650 Built: approx. 1995 Working width: 650 mm Fully automatic Cutting length: 4 - 1000 mm Roll diameter: 300 mm max. Material: Soft and hard foils PVC laminated fabric 0.1 - 1mm Dimensions: 1000 x 600 x 1000mm (W x D x H) Available: by arrangement

Crosscut and miter saws with maximum cutting height of 200 mm stable grey cast iron construction precise ball bushing guide of the tool slide on hardened and ground steel shafts Manual saw feed fast up to 65 ° horizontal MITRE setting and 60 ° vertical for adjustable fixed stops lower blade guard to extractor can be connected Machine mounted on mobile machine base with 1,5 mtr. long rollers left and right left side with scale and stop position slider Technical data: Engine: 400 V / 5.0 kW Speed: 2800 RPM Cutting length: 420 mm (at 90 °) Cutting height: 200 mm (at 90 °) Miter range horizontal: 45°-90° - 20 ° Miter range vertical: 60° - 90°-30° Saw blade diameter: 520 mm Dust nozzle: 100 mm Weight: 490 kg

480 x 320mm; 30,000 c/h; 4 x MID-WS unwinding stations; 4 X ZHF (Siguture systems); SLT station (card glue device); SHT (Gatherer Stitcher Drum); UTR delivery station; UTR-SNT gripper track; UTR SHT Delivery Station; SNT (trimming drum); UTR SNT Transfer Station; UTR-SNT gripper track carry unit UTR-SNT delivery station; missing copy delivery station (UTR); EP station; VP station; HP station ETR insert drum. Opition 2: Mid AWS (relax station); ZF SHT Feeder; UTR gripper track on 4X RAB insert feeder; 4 x VSS stations; Gripper to follow TO VP station-to ETR insert drum Still in operation: No Verf Gbar: Immediately

Thread cutting power M 2 - M8 Speed: 700 rpm, luf requirement: 750 l/min, pressure 6 - 7 bar, working range extension: 300 - 1900 mm, Afbau parallel arm: stable arm structure made of hard aluminium profile (38x29) Weight: 23 kg, adapter holder: TCS 1 B - incl. 6 safety slip couplings according to your choice year: 2009

Straightening and cutting machine rolling from Coil. used test line please ask us for your special offer.

automatic CUTTING BORING and MOULDING machine BACCI TTF1 2TM . second hand machine working conditions : Excellent hydraulic drive of all the movements volt. 380/50 CE mark : YES Machine suitable for assembling part of chairs, tables, frames, furniture, wheelchair frames, etc. The BACCI TTF1 2TM performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined . the milling unit is composed of n.02 spindle moulders ( anti-splinter system ) machine composed by 3 working units : 1- Cutting unit : circular saw max.diam. mm.400 motor power Hp 3 2- Boring unit : boring head with 5 mandrins motor power Hp 3 3- Moulding unit . with automatic movement of the carriage on recirculating ball bearings n.02 spindle moulders (anti-splinter) motor power Hp 7,5 spindle diam. mm.35 hydraulic unit motor power Hp 2

Thread cutting capacity: M 3 - M 12 Speed: 400 rpm Air demand: 750 l/min Pressure: 6 - 7 bar Extension: 950 mm Standard accessories: Parallel arm Air motor 6 pcs safety slip couplings of your choice guide column with mounting flange Radial boom Maintenance Pneumatic oil for initial filling

Material: Steel Engine: 15 kW Other data and price on inquiry. You can also get the entire system with all components.