glass bottle machine used for sale

Equipped with: 1x trestle with 18 pieces of glass plate. Glass thickness: 12mm Auction-ID: A1-40114-43

Heating rail TG 200 mØ from Herz for heating thermoplastics (e.g. acrylic glass) After selective heating, the acrylic glass plate can be bent slightly. A video of the running machine can be sent on request. Two-sided heating system via black radiator and digital temperature controller as well as automatic timer Timer starts automatically when the top flap is closed to the preset value. After the time has elapsed, a warning signal sounds to remove the material. Maximum working width approx. 2000mm maximum plate thickness according to the manufacturer up to 12mm due to heating of the plate on both sides Connected load 230Volt / 2800Watt with practical rip fence up to 1000mm depth CE mark Instruction manual Dimensions approx. 2500 x 1200 x 200mm (LxWxH). Weight approx. 35kg. The machine can be demonstrated on site by appointment. We offer only machines that are read ...

Without pallet Auction-ID: A1-47205-425

in working condition. tested for function. There is no right of withdrawal.See the Auction Terms and Conditions for more information. The minimum age for visiting the viewing and collection days is 18 years. Visitors must be able to identify themselves. A forklift is available during the collection day. The maximum lifting capacity is 3 tonnes. Use of the forklift truck is entirely at your own risk. In addition, waiting times may occur. All irregularities and signs of wear may not be clearly visible on the images. It is strongly recommended that you take advantage of the viewing day to personally inspect and assess the condition and appearance of the lot. Auction-ID: A7-46902-38

Inclined display case with glass hood and lighting 220V Auction-ID: A1-47205-415

Overview This container sweep-off depalletiser (new glass) was manufactured in 2020 by Germany Krones AG. The machine is designed for high-speed depalletising of new glass containers in beverage production lines. It operates with a sweep-off system using a four-sided centring carriage to transfer complete container layers onto a discharge table. Technical data Capacity: approx. 48,000 cont/h (up to 57,600 cont/h machine output) Application: Depalletising of new glass containers Configuration: Z-arrangement with pallet infeed and upper-level container discharge Pallet handling: Pallet lifting unit with automatic empty pallet discharge Discharge table: approx. 5,000 mm length Conveyor: Steel chain conveyor Drives: Servo drives (SEW) Sweep-off system: Four-sided centring carriage, servo-driven Layer handling: Integrated handling module with suction gripper system for layer pads and top ...

Technical data Mitre saw / sawing machine for saw blade Ø 250 x 20 mm Workpiece profile max. 40 x 45 mm Mitre angle 45°. Speed 2830 rpm Cutting speed 37 m/sec 2 saw motors with 0.75 kW each. Connected load 3~AC 400V / 50Hz / 2.8A Volume 74 / 86 dB(A). Weight 172 kg Configuration Pneumatic clamping device with 2 clamping cylinders, stroke 25 mm. Pneumatic connection via quick coupling. Required air pressure 6–7 bar. Air consumption 5.4 NL per working cycle. Dust extraction with suction nozzle Ø 80 mm, required suction power min. 0.1 m³/sec. Machine dimensions approx. 640 x 1140 x 1150 mm, table height 900 mm. Incl. positioning unit and extractor. Auction-ID: A7-47274-16

Stanford | Glass carrier with three suction cups with lever closure. Great Suction, Heavy Duty. Suitable for lifting flat, smooth materials such as glass, plastic, metal, coated wood, marble, etc. Also applicable for automotive: dent removal. The triple vacuum lifter is made of plastic and is suitable for lifting loads up to 130 kg. Auction-ID: A1-40890-47

This universal dishwasher from Hobart GmbH is a reliable and powerful hood-type dishwasher designed for the efficient cleaning of dishes, containers, and equipment in professional environments. The machine operates at 400 V / 50 Hz, features a robust industrial design, and is equipped with IP X4 protection and a control box mounted directly on the system, ensuring safe and convenient operation. A compact and reliable solution for food processing businesses. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: Hood type utensil washer, Voltage: 400 V, Frequency: 50 Hz, Features: IP x4, control box directly to the system

Overview  This semi-automatic new glass pusher was built in 2017 by the German manufacturer Alwid. The machine is professionally stored and can be viewed in person at any time. Technical details Semi-automatic new glass pusher with interchangeable gripper units 4 heads: adjustable depending on the layer pattern ALWID FEEDING TABLE + ALWID DEPALLETIZER

Window frames / transport frames – stable and in good condition For sale are stable window frames or transport frames in robust steel design. The racks are used, but are in very good condition and are ideal for storing or transporting windows, glass panes, doors or similar components. Details: Very stable industrial design Used, very good condition Mobile thanks to integrated castors Ideal for window, glass or door storage Dimensions: Length: approx. 1.17 m Width: approx. 1.60 m Height: approx. 1.76 m Auction-ID: A7-47308-39

Window frames / transport frames – stable and in good condition For sale are stable window frames or transport frames in robust steel design. The racks are used, but are in very good condition and are ideal for storing or transporting windows, glass panes, doors or similar components. Details: Very stable industrial design Used, very good condition Mobile thanks to integrated castors Ideal for window, glass or door storage Dimensions: Length: approx. 1.17 m Width: approx. 1.60 m Height: approx. 1.76 m Auction-ID: A7-47308-42

The Hoshizaki COMPACT KG420L LC DL CO E is a space-saving refrigerator with glass door for professional use in catering, sales, kitchen or beverage areas. With a usable net volume of 265 litres, the appliance is ideal for the clear cooling of drinks, food or other goods that require refrigeration. Thanks to the compact footprint of 59.5 x 66.7 centimetres, the refrigerator can be easily integrated even when space is limited. The integrated Hoshizaki air distribution system ensures even temperature distribution in the interior and supports reliable, food-safe cooling. The glass door with internal LED lighting allows a good view of the contents, making the refrigerator particularly suitable as a beverage refrigerator or presentation refrigerator. Other practical features such as a door lock, continuous integrated door handle, white shelves, automatic defrosting and reevaporation of the d ...

Micron: 0 – 100 μm, Hegman: 0 – 8 Auction-ID: A1-46933-73

Window frames / transport frames – stable and in good condition For sale are stable window frames or transport frames in robust steel design. The racks are used, but are in very good condition and are ideal for storing or transporting windows, glass panes, doors or similar components. Details: Very stable industrial design Used, very good condition Mobile thanks to integrated castors Ideal for window, glass or door storage Dimensions: Length: approx. 1.17 m Width: approx. 1.60 m Height: approx. 1.76 m Auction-ID: A7-47308-40

Window frames / transport frames – stable and in good condition For sale are stable window frames or transport frames in robust steel design. The racks are used, but are in very good condition and are ideal for storing or transporting windows, glass panes, doors or similar components. Details: Very stable industrial design Used, very good condition Mobile thanks to integrated castors Ideal for window, glass or door storage Dimensions: Length: approx. 1.17 m Width: approx. 1.60 m Height: approx. 1.76 m Auction-ID: A7-47308-38

Window frames / transport frames – stable and in good condition For sale are stable window frames or transport frames in robust steel design. The racks are used, but are in very good condition and are ideal for storing or transporting windows, glass panes, doors or similar components. Details: Very stable industrial design Used, very good condition Mobile thanks to integrated castors Ideal for window, glass or door storage Dimensions: Length: approx. 1.17 m Width: approx. 1.60 m Height: approx. 1.76 m Auction-ID: A7-47308-41

Overview  The glass depalletizer was manufactured by the German company KHS in 2005 and was until recently part of a bottling line in a German dairy company. The palletizer is now being released as the owner is shutting down the production. Technical details/ scope  Depalletizer with lift and discharge at the bottom With intermedeiate layer remover and magzine With slide for top layer/cover Enclosed conveyors can pull off single lane wise for shaped bottles Incl. protective fences, pallet transport, discharge table

Capacity 400-800 bottles per hour. Machine cleans, tightens the bottle with carbon dioxide, fills and closes the bottle with a cap. Combination with Weinview mobile labeling machine with thermal/pneumatic printer (for date) Total length 565cm, conveyor labeling machine is 2 meters, total width filling machine is 165cm, both sides 1 meter conveyor, total 565cm. Auction-ID: A1-41997-2

Performance: 30 000 b / h

Aggregate repairs for any type of KRONES cold glue aggregate. Any spare parts for cold-glue units. Please enquire. We offer complete overhauls in-house at fixed prices within a week.

Motor rating 0,5 (0,7) kW (PS) Connected load 400V 50Hz (3-phase) Electrical protection 16 A Nominal rating max. 400 bottles/h Length 780 mm Width 550 mm Height 1210 mm Weight 80 kg Material 1.4301 / AISI 304 brushes from polyamide Pressure max. 3,5 bar Connection for cleaning AG-1/2\" (Gardena) water temperature max. 30° C Connection for waste water PVC-Schlauch inside Fi45mm, outside Fi50mm ; new machine - top condition

Year of construction: 1980 Running direction: Left – right Pitch: 95 mm Siemens S7 controller, Danfoss frequency converter With a stainless steel control cabinet. Equipped with 3 sets of parts for the following bottles: 0.5 l NRW, 0.5 l Euro, 0.25 l Ale, 0.33 l Ale & 0.75 l Gastro. Machine is CIP capable. With electric height adjustment. Modernization and service by arrangement. The machine is in good condition and still in operation. A visit is possible by arrangement Year of construction: 1980 Working direction: Left – right Pitch: 95 mm Siemens S7 control and a Danfoss frequency converter. Installed in a stainless steel switch cabinet. Equipped with 3 bottle guiding parts for: 0.5 l NRW, 0.5 l Euro, 0.25 l Ale, 0.33 l Ale & 0.75 l Gastro. Machine is CIP able. Height adjustment of the filler bowl and closing machine by electrical gear motor. Reconditioning /  ...

Manufacturer: KRONES Type: K405-xxx Model: 960-16-5-5 YOB: 2003 Performance: 16,000 bottles/hour Running direction: RM clockwise feeding: linear - straight Aggregates: Agg 1 PWL460, AGG 2 PWL 300, AGG 3 donation unit Bottle table: servo Guiding: 1 x retaining infeed starwheel, 1 x discharge retaining starwheel Voltage: 230/400 V Electricity: 3PH/PEN Nominal frequency: 50 Hz Control voltage: 24 V Label: Body, back, wrap around Machine dimension: L = 3, 00 m x W = 2, 20 m without partly overlapping of the unit and discharge extension.

Washing machine 0.5 l bottle / 14,000 FL/h

GERA Bottle Washing Machine – Arcade GEL 6 RV1-VL 362/110-30 (Year 2010) High-capacity industrial bottle washing machine designed for efficient cleaning of returnable PET and glass bottles in beverage production lines. The GERA Arcade GEL 6 RV1-VL 362/110-30 provides reliable multi-zone washing performance and high throughput, making it ideal for breweries, soft drink producers, and mineral water bottlers. General Information - Manufacturer: GERA - Model: Arcade GEL 6 RV1-VL 362/110-30 - Article Number: 1334 - Year of Manufacture: 2010 - Operating Hours: approx. 35,000 h - Condition: Excellent used condition, regularly serviced Technical Specifications - Production Capacity: approx. 30,000 bottles per hour (1.0 L format) - Control Range: 13,200 – 36,300 bottles per hour - Cell Pitch: 110 mm - Bottle Cells per Row: 30 - Total Bottle Cells: 7,860 Washing System  ...

Bottle cleaning machine One end Manufacturer: SEN, KHS Type: Riwella VB 12/11-2, Built: 1987, Power: 5700 Fl/h, Bottle size: 55- 92 mm, length 170- 360 mm. Overhauled, with warranty

New machine! Max. Speed: 120 (Max. BPM.) Need to match the thickness of the film. Applicable Lable Thickness: 0.05 - 0.07 (m/m) Applicable Lable Lay Flat Width: 40 - 150 (m/m) Applicable Lable Cut Length: 25 - 50 (m/m) Air Pressure: 5.5 (80 psi) Applicable Products Shape: Round, Square, Oval & Others Applicable Material: PVC, PET, OPS, PLA Machine Dimension LхWхH: 1130 x 1000 x 1620 mm Power: 1Ø 220V 50/60HZ - HMI control system help worker operate machine & change size easily. - Single cutting knife cut shrink band without dog ear. - Shrink band apply to cap by sucker; it is good to work with wide cap container. - Single phase power is required, easy & convenient. - Door Interlocks safety feature protecting worker from injury.

capacity: up to 11,000 bottles/h suitable for 0.2 to 1.0 ltr. bottles year of manufacturing: 1990 partly dismantled for reconditioning

PET Empty Bottle Inspector HEUFT InLine TI 60 BFS2-r Device No. 2SG021663 Built: / year of construction: 2006 Output[B/h]: / performance [cont./h]: 36,000 Flow direction of: / moving direction from: Direction: / rejection direction: Installation location: / installation site: In front of the filler • Basic unit: Empty bottle inspector • Inspection: 1.Soil-IN-r • Inspection: Estuary IN-r • Inspection: 1st sidewall IN-r • Inspection: 2nd sidewall IN-r • Inspection: SW double resolution-r • Inspection: Carrying ring/PET-r • Inspection: RefPet abrasion-r • Inspection: RefPet Ventslot-r • Inspection: Stress crack detection-r • Accessories Transport belt: Height adjustable • Residual fluid detection: IR • Height adjustment: for discharge • Cross-adjustment: for discharge • Discharge ...

SLEEVE APPLICATOR CLEVER GS 602. performance on PET/Glass bottles: 45000 b/h : 0,4-0,5 L 24000 b/h : 1,5 L 22000 b/h : 2 L

Sidel Flexible SL90 F8564T/Sm with Cold Glue 8/8/130 S3/E3 Equipped with 3 Cold Glue Modules for front and back body and neck labels on round glass bottles. Bottle min/max height: 150 / 350 mm Bottle min/max diameter: 50 / 100mm Label min/max height: 20 / 120 mm Label min/max length: 20 / 130 mm Speed- Machine will run comfortably 36,000 BPH @ 330ml on Cold Glue . (max speed 72,000)

This pharmaceutical grade bottle washing machine has been designed to meet the needs of the most demanding customers and to comply with international standards in order to provide high level performance along with easy access to components, all in a small footprint. This rotary washing system was developed and designed keeping in mind the high level of cleanliness required in the pharmaceutical industry. High washing and rinsing performance. Small footprint, size and utility consumption. The washing chamber is made entirely of stainless steel and is surrounded by a Plexiglass cover. Presence of an electrical panel for easy control management.

with 12 bottles/row cell pitch: 110 mm capacity: approx. 2,000 - 2,500 fl./h Oil-direct heated including oil burner

Bottle washing machine, Fabr. Krones, type: Lavatec KESK 245/17-120, control range 4,000 - 11,000 fl/h, for bottles with max Ø 105mm, built in 2002, Eind machine, with 180 rows of 17 bottles/row each, with pre-soft water and lye, main liquor with immersion switch and after-liquor spraying, 3 water sprays hot, cold and fresh water in stock from May!

Bottle washer PAC / Switzerland Type CB 12 Eind 8,000 fl./h 0.25 to 0.50 L glass bottle Year of construction 1997 FILM AVAILABLE - PLEASE REQUEST Further information and price on request

Bottle washer, make Krones, type: Lavatec KES 245-26-080, for 39.000 bph, control range 15.000-46.000 bph, 26 bottles/row, with 80mm cell pitch, 110mm chain pitch, with SPS Siemens S7 control, width: 4.745 mm, length: 11.283 mm.

Bottle washer, make Klinger, type: Superserpende 16/0,5 Liter, for 10.400 bph nominal capacity, 16 bottles/row, with 85 mm bottle cells, runs on 0,5 lt and 0,33 lt bottles, with Siemens S5 control, can still be seen in operation.

Bottle washer, MAG, 10 bottles / row, with 80 mm plastic cells, built in 1991

Bottle washer, make O+H, type: Contitact, for 12,300 fl/h, with 80 mm bottle cells, built 1987

Auction-ID: A1-46820-68

Used bottle washer manufacturer: Klinger / Austria Year of construction: 2000 / General overhaul in 2010 at the Klinger Austria plant Type: Euro Class 24/1/844 Capacity: approx. 10,000 bph Control: Siemens S7 Total operating hours: 17,443 hours Net weight: approx. 18,000 kg Steam heated Can be used for bottles: Volume: 200ml - 1.000ml Bottle diameter: 50 - 90 mm Bottle height: 110 - 330 mm The bottle washer has so far been used for: 330ml Longneck 500ml Longneck 330ml swing top bottle 500ml swing-top bottle

The detection is set up on 0.5l glass bottles in the 20 module box. The inspector is equipped with a multi-camera system. As soon as a foreign bottle is detected in the box, it is then discharged via a pusher. Currently is set to cross travel. The detection is adjusted for 0,5l glass bottles and twenty modul crates. The inspector comes with a multi camera system. If an external bottle is detected, the crate will be pushed out in an other line. Currently the set up is for a long side leeding crate.

Machine was serviced annually. Maximum bottle diameter 69mm. Set up for the following formats: Vichy 0,33l Long-neck 0,33l Long-neck 0,5l NRW 0,5l Steini 0,33l Information without guarantee Yearly maintenance. Bottle diameter 69mm. Prepared for this sizes: Vichy 0,33l Long-neck 0,33l Long-neck 0,5l NRW 0,5l Steini 0,33l Informations without guarantee

Bottle washer, Fabr. Krones, type: Lavatec KESK-212/22-80, 22 bottles/row, with 80mm Cell division, plastic cells, with attached control cabinet in stainless steel, built in 1999, L: 7,955 mm, W: 4,216 mm, H: 3,270 mm, already dismantled and stored

We sell our bottle washer the hourly output was at 4500fl/h YOC 1988 13 cells Length = approx. 7m Width = approx. 2.2m

Empty bottle inspector, make Heuft, type: Spectrum TX (HBBIRTI24), built 2006

Labeling system for round bottles. System incl. code reader LAETUS, hot stamp system ALLEN, rejection of faulty products, 3-roll system, PLC SIEMENS Simatic S7-300, label dispenser. Max. label height: 90 mm. Max. passage width: 100 mm.

Mobile high-performance all-round bottle labeling machine incl. label dispenser PAGO 6/2 6 R7/510, rejection of faulty products, 50 ml format set for diameter 46 x 68 mm height, hot air system ALLEN type NX2i, PLC SIEMENS type Simatic S7-300, etc.

• Fully automatic machine for cleaning (blowing out) bottles using compressed air • Running direction from left to right • Connection pressure 6-9 bar, working pressure 0.5-3.0 bar • Output max. 12,000 bottles/h • Bottles are rotated 180° so that the openings point downwards. Blow-out needles plunge into the interior of the bottles • Pressure sensor for checking the correct blow-out pressure • Extraction of blow-out air and residues below the bottles • HMI Siemens Simatic Touch Panel • PLC Siemens S7-300 • With format set for 10 ml vials (diam. 25.3 x 46.2 and diam. 24.0 x 45.0, other format sets on request) • Connection 230/400V/50Hz • Has worked together with bottle unscrambler 02-0746 (see pdf)