glass bottle machine used for sale

X-axis: 600mm, Y-axis: 400mm, Z-axis: 400mm; Clamping table: 500x 320mm; Speed range:63-3150 rpm, Number of steps:16, Tool holder: SK40, equipped with digital display, Make: Heidenhain

manf. 2009 / CE Label optical & technical very good conditions! more details on request exw Germany

Stapling machine nail Multinak S

First commissioned: 2006 Control: Fidia C20 incl. handwheel X-axis: approx. 7,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,751 mm A-axis: + 125° / - 95° C-axis: ± 275° Clamping table Clamping surface: approx. 6,000 x 2,000 x 400 mm Head Spindle power: 20 kW Spindle speed: max. 20,000 min-1 Tool holder: HSK 63A Tool tensioning: hydraulic Drives Linear axes Feed speed X-, Y-, Z-axis: 65 m/min Axle acceleration X-, Y-, Z-axis: 5 m/s2 Connection data Connected load: approx. 150 KW Dimensions, weights Space required Machine with protective cabin Dimensions: approx. 12,200 x 6,300 x 5,800 mm Total weight: approx. 105,000 kg Auxiliary - 20-fold tool changer - Engine room surveillance (camera) Options at extra cost: - Renishaw RMP60 probe - Fidia HMS System Condition of the machine Fully functional, very good condition

Table length 1480 MM Table width 600 MM Table height adjustment stroke 600 MM Engine 2 hp – 1.5 KW Band length Max Min 3950 MM-3800 MM Bandwidth 100 MM Belt speed 24 m/sec Weight CA 250 KG Space requirement 180 X 100 X h 170 cm CE version

The machine is available in stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-C2 4kW IPG / VF1530-4000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 4.0kW - Source brand: IPG - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 22.0mm, maximum thickness 25.0mm - Stainless steel: Recommended thickness 10.0mm, maximum thickness 12.0mm - Aluminum: Recommended thickness 8.0mm, maximum thickness 10.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by ...

Specifications: Tube outer diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W Feed module AVM 0.1 - 2.3 rpm incl. feeding unit and auxiliary unit used, in good condition.

DIEDESHEIM vertical lathe Vertifront 120-12 CNC. Electrics and geometry overhauled in 2007 for approx. 290.000,00 €! Former machine of the company Hoesch Rothe Erde Lippstadt, permanently maintained and maintained. Equipped with two turret supports (5-fold), protective hoods against emulsion vapors, housing see pictures, CE compliant. Details: Type 120-12 CNC Machine number L738 Year of construction 1983 Refurbished 2007 Space requirement approx. 20 sqm Weight approx. 20 to Power consumption approx. 110 kW Headstock Main spindle bearingsØ axial 500 mm radial 240 mm Cross Slide Unit Vertical slide stroke 800 mm (Z-axis) Paddling slide stroke 1,000 mm (X-axis) Basic hydraulics complete, system RING 2x2 axis CNC path control SIEMENS Sinumerik 3 TT Optional accessory 6-fold face plate clamping ideal for thin-walled workpieces ...

Voltage: 380 - 400 V Phase: 3 Hertz: 50 Hz Output current: 40 - 350 A Duty cycle: 80% Welding wire: 0.80 - 1.2 mm Weld plate thickness: 0.5 - 12 mm Accessories: Gas-protected welding gun (5 mm) European plug (50 mm²) Earth terminal (2 m) 36 V gas control Features: IGBT MAG / MIG, MMA & Lift TIG Dual pulse function VRD 2T/4T function 4-drive feeder 5-language support 18 sets Packed in 2 boxes: 730x420x900 and 550x330x400

As good as new hand groove device / creasing device, working width 355mm

Multipli with pheumatic bow feeder , compresser, double sheet control , 2 pockets

Spine round machine Top condition, cleaned and tested

Used dough weigher RHEON, type: KN-125 with belt scale and rotary table -Refurbished- - for single or double-filled products, such as coloured cookies, sweets or other pasta - all possible forms (see photo) - 100 recipes can be stored - in stainless steel and food sterile - with belt scale from OSC - optional double filling unit - Condition: very good, as new, completely overhauled - 6 months warranty Specifications: - Weight range: 10 - 90 g - Product length: no limit - Output: 1,200 - 6,000 pcs./h (depending on product) - Weight performance: max. 180 kg/h - Machine dimensions: 1,516 x 874 x 1,360 mm Visits and test runs are possible by arrangement.

From September 2022 immediately available newly overhauled Multigrind HT retrofit machine prepared for resharpening hobs / worm gear cutters / pushers and cutting rotor Control: Siemens 840 D X - axis 650 mm Y - axis 400 mm Z - axis 280 mm A - axis (dividing apparatus) 360 ° SK50 C - axis (rotary table) 270 ° X3 - axle with tailstock Grinding spindle: HSK50 Dressing unit Tool changer: 10-fold magazine plate Coolant system: Turbo Separator Suction: LTA Extinguishing system Other accessories: Available ex works Software: Customer-specific delivery Financing / hire purchase possible.

Boyens Jelly compact glaze sprayer Serial: 1500112073 2012, Digital temp adjustment, manual adjustable spraying pressure, short warm up time, twin spray guns, 3.5Kw, mobile, 1Ph

Boyens Jelly compact glaze sprayer Digital temp adjustment, manual adjustable spraying pressure, short warm up time, twin spray guns, 3.5Kw, mobile, 1Ph

Electric taps for M3 - M16 threads, Angle adjustable. Quick-change chuck with slipper clutch. Adjustable via display: variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. Thread diameter M3 - M16 metric Speed infinitely variable 312 rpm. Working range max. 1100 mm Weight 25 kg

(1x) on console, various makes and models.

V-belt driven.

Boyens Jelly compact glaze sprayer Serial: 1500718186 2018, Digital temp adjustment, manual adjustable spraying pressure, short warm up time, twin spray guns, 3.5Kw, mobile, 1Ph

Capping heads Zalkin different closure sizes

Schlatter coordinate Orion Flex Range: 1350 x 600 mm MY: 2003

Serial number: 36434 Operating voltage: 380 - 415 V Connection: 1.5 kW Speed: up to 1400 rpm Rated current: 5.7 A Speed: from 70 to 2590 rpm Drilling depth: up to 170 mm Table dimensions: 650 x 270 mm with three grooves incl. three-axis digital display from the manufacturer HEIDENHAIN also an attached vice, jaw width: 85 mm and a matching dividing head

Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated Input Current: 14A Rated input power: 9.2 KVA Open circuit voltage: 256V Output Current Setting: 20-60A Rated Output Voltage: 104V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc discharge by contact

A paper cutting machine is offered. estimated value of goods 1000 € Shipping within Germany possible - direct processing with the seller. Only bid if you have sufficient financial resources, a bid is binding.

Control NCT ... 104 Clamping table surface ... 3100x1000mm Axis X ... 3000mm Axis Y ... 1200mm Axis Z ... 1000mm Spindle speed ... 0-4000 rpm The machine is in good condition, possible to test under electricity.

Diosna RZ 3 Residual bread shredder / Universal shredder - Restbrotzerkleinerer Diosna / Oase - Model: RZ 3 - KW: 3 - 400 volts

Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display;

Table power supply X-Y axis: 8-400 mm/min. Table power supply Z axis : 4-200 mm/min. Eilgang X-Y shaft: 2400 mm/min. Electrical flux Z axis:1200 mm/min. Heidenhain readout with probe

Voltage 220V +-15% ; 10-130A current range; 25% duty cycle (25c) IP21S; breasts and welding hood; Inverter MMA welding machine; 25% 130A 25.2V ; 60% 84A 23.4V; 100% 65A 22.6V; fan cool;

Rated power: 5.5 kVA; Rated current: 25 A; No load voltage: 243 V; Output current: 20-40 A; Rated output voltage: 96 V; Cyclic duration factor: 40%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6095

Spare parts of the SCM group directly from Italy

MAX TRUNK DIAMETER 1200 MM - CUTTING LENGTH 7800 MM - 11 KW/15 HP ENGINE - PRE-CUTTING AGGREGATE - AUTOMATIC FEED FOR SAWING UNIT - POSITIONING CONTROLLER ISP 010 - Supply voltage - 400 V, 50Hz - Vertical chain stroke up / from 30 mm / 1s with gear motor - horizontal / vertical cutting head spacing in one cut - 1150/280 mm - Longitudinal feed of the cutting head - Liquid inverter 0-40 running meters / min - maximum dimension of the cut Logs up to 1200 mm - Saw blade width - 32-35 mm - Saw blade length - 4,800 mm - Cutting thickness -1.5-2.5 mm - Diameter impellers - 475 mm - Substructure made of closed 120 x 120 x 5 mm profile - Columns supporting the wood were made of a profile of 80 mm x 160 mm x 4 mm - Diameter of the processing log up to 1200 by turning

Rapid traverses: X and Y axis: 100%: 4 m/min 50%: 6 m/min Z axis (rotary table): 100% - 6 rpm 150% - 9 rpm Travel (from table center) Y-axis: + 110 mm, -95 mm Travel X-axis: +55 mm, -55 mm Largest bore Diameter: 220 mm Rotary table diameter: 400 mm Lifting speeds: 22, 45, 55, 75, 110, 150 Stroke length: 200 mm Stroke displacement: 250 mm Feed/stroke: 0.01 - 0.2 mm lifting stroke: max. 0.3 mm Reference: Hercegfi - Lot 2

MAX TRUNK DIAMETER 850 MM - CUTTING LENGTH 7800 MM - 7.5 KW/ 10 HP ENGINE - AUTOMATIC FEED FOR SAWING UNIT - POSITIONING CONTROLLER ISP 010 - Supply voltage - 380V, 50Hz - Vertical chain stroke up / from 30 mm / 1s with gear motor - Longitudinal feed of the cutting head - Liquid inverter 0-40 running meters / min - maximum dimension of the cut Logs up to 1200 mm - Saw blade width - 32-35 mm - Saw blade length - 4,010 mm - Cutting thickness -1.5-2.5 mm - Diameter impellers - 475 mm - Substructure made of closed 120 x 120 x 5 mm profile - Columns supporting the wood were made of a profile of 80 mm x 160 mm x 4 mm - Diameter of the processing log up to 850 by turning

The machine is complete Light or low refurbishment required

Planer width 630 mm chip removal 8 mm Planer shaft type Xylent spiral Main engine 7 kw HP HP 9,5 50 Hz Third pull-out roller min max planing height 3.5 mm - 300 mm

Double disc grinding machine

Loose 4th axle.

TIG welding machine - New - Hose package 3m - Additional hose package 8m - Custom cable - Gas connection hose - Documentation Current 200 A Power at 100% ED 150 A Mains voltage 230 V Input power max. kVA Machine weight approx. 9.0 kg Space requirement approx. 0.46 x 0.15 x 0.32 m

Table dimensions: 1000 x 800 mm

Round bending machine - large

Econiche data: Drilling rig 345-31 WHT-No. 147-0338 SNr. 103 563 Linear unit M4: Fanuc, type: Beta is 4/4000 HV A06B-0064-B203 Motor: plug version with resolver Resolver line and motor cable: PM505CBL2040B 10 319V 50Hz 2.3A 3.5Nm , 3000 rpm Drill tape M3: Astro, type: ASM 46 SG10 3-400V 50/60Hz 65/60mA 4/4,8min-1 Spindle drive M1: Bonfiglioli, type: BN 132 S 6 No. 802002 Cod: 8D62030016-519951 230V / 460V 13.5A / 7.8A 50H7 940 min' 3kW cosQ 0.76 IP 55 IsKI.F Lifting drive M2: Fanuc, Type: Beta 22/2000 HV is A06B-0086-B503 Motor: in plug version with resolver and brake Resolver line and motor cable with brake: PM505CBL2020B 5 448V 50Hz 3.4A 22Nm, 2000 rpm Insert tape M10 : SEW / Maschienenbau Kitz, Type: WF 10DT56LA/TF Product number: 01.1230640901.0001.08 230V / 400V 50Hz 0.80/0.46A 0.12kW 1600 rpm cos 0.68 Delivery belt M11: SEW / Maschienenbau Kitz, Type ...

Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated input current: 25A Rated input power: 5.5 KVA Open circuit voltage: 243V Output Current Setting: 20-40A Rated output voltage: 96V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc discharge by contact

Mägerle rack and pinion grinding machine grinding machine MFP-L Siemens CNC Manufacturer [manufacturer]: Mägerle Type [ type]: MFP-L-260-75 Control unit: Siemens 840D Sinumerik Incl. handwheel Year of construction[construction year]: 10/2008 Travel path: Clamping surface table X= 2202mm Clamping surface table Z=352mm Longitudinal stroke 2600mm Cross stroke of the grinding support: 650mm Distance between table and grinding spindle axis 806mm Grinding wheel dimensions: Diameter 400mm Width 160mm Bore 127mm peripheral speed grinding wheel: 35(50) m/s Lifting speed: Longitudinal 30m/min Transverse 5m/min Vertical 5m/min smallest delivery amount 0,001mm Drive power: grinding wheel (AC) 75kW Total connection power: Machine 113kVA Knoll coolant filtering equipment dimensions ca: (L x D x H): 5.6m x 2.4m x 3m [weight]: 2.000kg Machine weight: 21.000kg Sp ...