127,344 used machines on RESALE, but how to find them? Machine Search
A GM Gera bottle cleaning system is available. Throughput capacity with 1l PET bottles: 13000 bottles/h, bottle cells: 3240 pieces, cells per basket row: 18, cell pitch: 110mm, chain pitch: 169mm, total treatment time: approx. 15min, total immersion time: approx. 7.5min, housing material: stainless steel (SST). System dimensions X/Y/Z: approx. 8900mm/4200mm/3350mm, weight: approx. 23650kg, operating hours (09.2025): approx. 14300h. Documentation available. An on-site inspection is possible. Expected to be available from mid-March 2026.
A Heuft empty bottle inspector is available. Inspection areas: base/foot/sidewall/finish ring/underchip/finish, sensors: infrared, image processing system: Heuft reflexx, performance range: 5000-50000bottles/h, machine dimensions X/Y/Z: approx. 2050mm/1000mm/1850mm, weight: approx. 1600kg. Documentation available. An on-site inspection is possible.
Output (Packs Per M?Inute): 45 U/min // Type : Barrel
A rotary labelling machine for bottles from the manufacturer GERNEP GmbH is offered. Front and back labels, wet glue/cold glue units, self-adhesive units. Inspection by arrangement possible.
Bottle formats: Diameter approx. 20\endash 40 mm, height approx. 45\endash 70 mm, according to format set Output approx. 6000 bottles/h With format set for round bottles Ø 24 mm x length 52 mm Feed hopper with lifting device, Aligner for correct positioning of the bottle on the conveyor belt (e.g., filling machine) 240V/50 Hz
AVE UNIBLOCK 16/16/4 Bottle fillers. However, I can suggest common features found in similar bottle filling machines, which may include:, - Filling Type: Gravity, Pump, or Gravity/Pump combination., - Production Rate: Typically measured in bottles per hour or minute., - Number of Filling Heads: In this case, it could refer to a 16-head system, meaning it can fill 16 bottles simultaneously., - Bottle Size Range: Specifications may include the range of bottle sizes the machine can handle., - Control System: May involve PLC (Programmable Logic Controller) for operations., - Material Construction: Stainless steel or food-grade materials suitable for hygienic applications., - Dimensions and Weight: Overall dimensions and weight for installation considerations., - Power Requirements: Voltage and power consumption details., Bottle Sizes: 250 ml, 500 ml, 1 Litre , 2 Litre , Cap Size: 38 mm, Capa ...
This machine is used for inline inspection of bottles or containers with regard to fill level, closure and labeling.
Miho David 2001 Empty Control System automatically inspects glass bottles for foreign bodies, dirt, liquid residues and bottle defects before filling. Only flawless bottles are filled. Robust design and reliable performance increase process reliability and product quality in beverage production lines. - Up to 25,000 bottles/hour - from left to right
Mag Schymanski Bottle Washing Type Sirio 7-10 is a powerful bottle washing machine for industrial bottling plants. It ensures effective internal and external cleaning of glass and PET bottles and meets the required hygiene standards before filling. Adjustable parameters, robust construction and easy maintenance make it a reliable solution for beverage production. Control range 3,600-8000 bph Machine design Stainless Steel Method of operation Continuous Max. bottle diameter 75 mm Max.Bottle Height 290 mm Bottles in machine 1,720 pieces Bottle cell carrier 172 Pieces Cell division 95 mm Chain Pitch 140 mm Power consumption 12.33 kW Fresh water verb. 2,300 ltr./hr at 1.5 bar Heat demand Hourly output x 14.01 = demandin Kcl. Curb weight 12,000 kg Full weight 19,000 kg Length 7,000 mm Width 2,095 mm Height 300 ...
For sale is a functioning bottle washer. The facility is in good general condition according to its age. Technical data: • Year: 1995 • Capacity: 2,000-3,000 bph The system is equipped with liter cells. If you have any questions, please feel free to contact us at any time.
For sale is a functioning bottle washer. The facility is in good general condition according to its age. Technical data: • Year: 1995 • Capacity: 2,000-3,000 bph The system is equipped with liter cells. If you have any questions, please feel free to contact us at any time.
Rotary Front- Back or 9/10'^ Wraparound Self Adhesive Labeller Machine Manufacturer: BRB Model: MEGA ADE 622 YOM: 2017 Label Stations: 2 Allen Bradley PLC/HMI Output: 3,200 containers per hour Rotary machine with carousel diameter of 480mm and 6 bottle platforms. Complete with; One set of bottle change parts One set of label parts 2 self adhesive stations CE safety guards 1 Extra set of can handling parts 1 Empty can pressurization system Labeller to run at 4,000 cph This is a SECOND HAND item and is sold as seen. For more information and more available stock please visit us at - advancedbrewing.co.uk
Filmatic bottle fillers are typically designed for the automatic filling of various types of bottles, including plastic, glass, or metal containers. Here are some general details about them:, - Types of Fillers:, - Gravity Fillers: Rely on gravity to fill bottles and are ideal for thin liquids., - Features:, - Adjustable Filling Volumes: Many models allow for the adjustment of fill volumes to accommodate different bottle sizes., - Speed and Efficiency: Modern fillers can operate at high speeds, reducing bottling time in production lines., - Sanitary Designs: For food and beverage applications, these fillers often have designs that prioritize cleanliness and ease of maintenance., - Integration with Other Machinery: Filmatic bottle fillers can often be integrated with capping and labeling machines for a complete bottling line solution., - Applications:, - Used widely in industries like foo ...
used
Nagel inspector, for bottom, mouth and residual liquid control, set up for 0.33 l longneck bottle (other formats possible), completely overhauled in 2025, available at short notice due to cancelled order.
A glass bottle washing machine PAC Swiss is available. Washing capacity: 7500bottles/h, cycle time: 6.72s, throughput time: approx. 12min, bottle types: Euro/NRW/Ale, bottles per row: 14, max. bottles in the machine: 1456, bottle volume: 330ml/500ml, process: preheating/caustic treatment/recooling/spraying, machine dimensions X/Y/Z: approx. 7050mm/1800mm/2300mm, operating hours: approx. 14175h. Documentation available. On-site inspection is possible.
GERNEP Labetta labeling system. Built in 2013 with 11 bottle positions, 3 self-adhesive label dispensers and 2 wet glue label dispensers. Output 6K bottles per hour. Servo plate (also for cans). Self-adhesive formats available: 200ml/ 330ml/500ml/750ml. Wet glue format available: 200 ml other formats can be retrofitted. Incl. treadmill and turntable. For more details, please contact us.
An empty bottle inspection machine Heuft including a pre-sorting unit Heuft Spectrum SX TB 72 and Gateway II is available. Inspector: rated throughput: 72000bottles/h, bottle types: Ale/NRW/Euro/Krombacher swing top/swing top, bottle colors: green/brown/clear, closure types: crown cap/screw cap/embossing, bottle volume: 330ml/500ml, pre-sorting: bottle type/bottle height, inspection types: sidewall/finish/thread/base/residual liquid/labels/test bottles. Including defective bottle reject systems and infeed and outfeed conveyor. Documentation available. An on-site inspection is possible.
Top-up labeller from the manufacturer HERMA Item condition: as good as new Availability: immediately Output: Up to 20 pieces per minute (depending on the operator) Tolerances: ± 0.5 mm in the label travel direction ± 0.5 mm perpendicular to the label running direction Description of the labels Distance between labels: min. 2 mm Distance of the labels to the edge of the carrier tape: min. 1 ± 0.3 mm Label thickness: 40 – 100 μm Weight: 30 – 200 g/m² Carrier belt thickness: 23 – 120 μm Label material: Paper Single-layer and multi-layer Suitable for internal deflection with a diameter of 25 mm and External deflection with diameter 45 mm Material carrier strap: Paper or plastic Without punching With as few machine-compatible gluing joints as possible Breaking resistance longitudinally at least 92 N per 15 mm Beam bandwidth according to DIN ISO ...
Bottle washing machine O + H Contina type E44C / 302-110 year of manufacturing: 1995 capacity approx. 30.000 bph incl. Siemens S7 PLC control system incl. HMI touch panel incl. fully automatic bottle transport system incl. integrated safety systems and emergency stop incl. electrical control cabinet The machine is made of stainless steel and it is suitabble for returnable glass bottles. The machine is still in production until November 2026 in Germany.
Empty Bottle Inspector Heuft InLine reflexx Release 9, Pre-sorting of the Heuft Spectrum SX TB 72 and the associated Gateway II (network connection) (output max. 72,000 bph; Built in 2009). The following types of bottles can currently be checked: • 0.33 l ale / green / KK • 0.33 l Ale / brown / KK • 0.50 l NRW / brown / KK • 0.50 l NRW / clear / SV • 0.50 l Euro / brown / KK • 0.33 l swing-top bottle / brown / embossing • 0.50 l swing-top bottle / brown The following checks are carried out: • Pre-sorting Heuft Spectrum SX TB 72: - Bottle shape - Bottle height • Empty bottle inspector Heuft InLine reflexx Release 9: - Sidewall inspection (inlet and outlet) - Muzzle inspection - Thread inspection - Soil inspection - Residual liquid (IR/HF) - Additional detection in the outlet for any sticking labels in the neck area - Test bottle detection T ...
Krones Lavatec Year of Make: 1999 Output: 24,000 bph. Retrofit: 2014
Klinger bottle washing machine also for swing-top bottles. Machine can be planned and set up by us. We can also supply additional conveyor technology
Heuft Inspector for 0.5l Euro 0.5l Bracket 0.33l Longleg Bottle Machine can be scheduled by us and bottle run can be adjusted.
Krones bottle washer built in 2001 676-039 6000 bottles/h 0.2l-1.0l bottles Machine will be available in December 2026
Bottle washing machine MAG Type Sirio 8 with 10 bottles per row capacity: 3.000 – 11.000 bph Year of manufacturing: 1990 suitable for 0,2 ltr. – 1,0 ltr. bottles The machine is available from December 2026.
Cleaning machine, Fabr. GM Gera, Type: Arcade, for 24,000 bph, control range 7,600 - 26,400 bph, 25 bph, cage pitch 95mm, chain pitch 140mm, with Siemens S7 control
Cleaning machine, Fabr. GM Gera, type: Arcade GEK2.1RV1, for 4,000 bph, 9 b/row, with 0.5 lt NRW bottle, cell pitch 95mm, with pre-soak, caustic bath 1+2, hot water bath 1+2, cold water and fresh water spraying, year 2007
Cleaning machine Fabr. Krones, Lavatec type: KES-2-2-212/22-80, built in 1999 for 0.33 lt Vichy, 0.35 lt. AFN bottle, 0.5 lt NRW and EURO bottle with Siemens Simatic Touch Panel
Cleaning machine, Fabr. PAC, type: CB 16-1 R-7,5 LII, for 6,000 bph, up to 1 lt. bottles, 16 b/row, year 1994, L: 7350mm x W: 2800mm x H: 2800mm Weight approx. 8 to, disassembled, for sale.
Cleaning machine, Fabr. PAC, for 3,000 bph, 6 bph, for bottles with Ø 90mm + height 262mm, with 2 lye baths, hot and cold water and fresh water bath, built in 1995, for sale.
Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: Capacity: 9,500 bph Cell Pitch: 95 mm Bottles per row: 25 Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg YOM 2024 Formats: 0,25l 0,33l 0,5l 0,75l The Machine in Detail / Equipment Features: Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machin ...
Roll Fed OPP Hot-Melt Labeler Rollmatic 540 – High-Speed Rotary Labeling Solution for Cylindrical Bottles The Rollmatic 540 roll-fed automatic rotary labeler is a powerful, high-performance rotary OPP labeling machine engineered for seamless wrap-around label application on cylindrical containers. Designed and manufactured for industrial bottling lines, this system applies plastic film OPP labels using hot-melt adhesive applied to both label ends for a clean, durable, and precision-aligned finish. Labeller has one dual-roll label feeding station for film reels, roll change is manual. The plates are rotated by a toothed belt, ensuring smooth and consistent motion. For precise label application, the machine is equipped with an alignment system that automatically corrects even the slightest deviations, keeping the film perfectly horizontal. The machine is supplied with change parts ...
Neck freezer for champagne bottles Machine completly manufactured in stainless steel Production 450 bottles/h Dimensions 100x100x90 cm
For wine and sparkling wine bottles 6000 bottles Type: WD/ 12 capacity / hour ca.:10000
Capacity: 2000-5000 bph Electricity: 9 kW (3 fans), 440V, three phase, 50hz Dimensions: 2250x950x1700mm (H) Weight: 350kg
For manual, optical quality control of the bottles before the filler or fill level control - Stainless steel housing - With backlighting - With overhead lighting - Electricity: 230 V - With two brackets for direct mounting on the bottle conveyor belt - In very good condition Dimensions: - Height: 560 mm - Length: 1000 mm - Width (bottom): 90 mm - Width (top): 240 mm
Overview This complete filling line for non-returnable PET bottles was manufactured 2004 by the german manufacturer KRONES. The line was running as a non returnable bottle filling line. The line is designed for high-capacity beverage production, handling up to 12,000 b/h and is in a good condition. Technical Data Capacity: 12,000 bph (at 1,5L); 14,000 bph (at 0,5L) Filling product: carbonated water and soft drinks with 15°C and 8,0 g/l CO2 Bottle Formats: 0,5L and 1,5L PET CSD Cap Formats: PCO 1810 Contiroll labelling station 2-3-340 for wrap-around label from a reel with hotmelt and 2 x cold glue labelling station 8-8-130 for paper label Packaging formats: shrink wrapping with/without carry handle (3x2) Pallet: 4 x ¼ Plastic pallet (600 x 400 mm); 2 x Half-size pallet (800 x 600 mm) on Euro pallet (1.200 x 800 mm) Application: CSD Hygienic design condition: good technical con ...
Bottle washer with rinser function with additional cleaning basket and jack and 6 canisters of cleaning agent - Jemi - new generation built in 2022
- Output: 10000 bph - Year : 2007 - With ozone generator - Manufacturer : PROMEC - Model: Rotonech - M1110-36 - 2 - Type: Dual Channel Sterilizer Rinser - With recirculation tank, pump and filter - Position spray heads: 36 pieces - With closed hood and ozone air extraction - Strap height : 1250 mm (incl. additional foot pads) - Bottle formats: from 55mm to 99.8mm (total 20 different bottles) - Running direction: Left – Right Dimensions: - Width: 1900 mm - Depth: 2200 mm - Height: 2250 mm - Machine available from the end of July 2026 - Machine in good condition
Vibrating bottle 48 mm, w/converter, residual container
Vibrating bottle 48 mm with converter LÖTZKE Rabbit, S/N 101829, 230 V, IP 21
Manufacturer: RINK Machine type: Capsule Roller Year of manufacture: 09/2022 Electrical Specifications - Rated voltage: 230/400 V - Network type: TNS - Mains frequency: 50 Hz - Full load current: 4.5 A - Short circuit resistance: 10 kA - Isolating device: 10 kA - Pre-fuse: 3x6 A Protection - Enclosure protection rating: IP 55 Find more here - / Contact us at -
Overview This PET bottling line consists mainly of equipment from GEA Procomac, complemented by machines from Arol, VBC, SMI, TwinPak, Robopac, SIPA, Logopak, Domino, Ventilo and PE Labellers. The line was mainly manufactured in 2009, with several later additions and upgrades between 2013 and 2022, including the pallet wrapper, labelling machine, Domino laser coding system and extraction unit. The line is suitable for beverage production in PET bottles and includes the key process steps from air conveying, rinsing, filling and closing to nitrogen dosing, tray-shrink packing, handle application, palletizing, pallet wrapping, pallet labelling, sleeve labelling, coding and extraction. Technical Data Line type: PET bottling line Capacity: 12.400 bottles/h Application: beverage filling in PET bottles Main manufacturer: GEA Procomac Main year of manufacture: 2009 Later upgrades / additions: 20 ...
Overview This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and must be replaced due to an increase in performance. Technical details Nominal output: 33,000 bph Control range: 13,200 - 36,300 bph Chain pitch: 169 mm Cell pitch: 110 mm Bottle cells per row: 30 pieces Total bottle cells: 7,860 pieces Bottle cells, loaded: 7,680 pieces Consumption Compressed air: 1m³ Steam (operation): 489 kg/ h Steam (heating): 4,430 kg/ h Electrical power: 48.4 kW Water: 7.35 m³/ h Bath volume Pre-soak: 2,263 l Pre-caustic: 7,240 l Caustic 1: 31,755 l Caustic 2: 350 l Hot water 1: 350 l Hot water 2: 350 l Cold water: 350 l
Overview This empty bottle inspector (EBI) was manufactured in 2014 by the German manufacturer Krones. The machine is designed for the inspection of empty glass bottles prior to filling in beverage production lines. It is still in production and will be professionally dismantled in early 2027 as the complete filling line will be replaced. Technical data Capacity: currently running at 18,500 bph, but can also work at significantly higher speeds. Formats: 0.75l bottle 0,5l bottle Application: Inspection of empty bottles prior to filling Configuration: Multiple inspection modules including base inspection, sealing surface inspection, thread inspection, mouth/finish inspection, sidewall inspection, residual liquid detection, foreign container detection, bottle height control (±2.5 mm tolerance) Inspection systems:Base inspection (camera) Sealing surface inspection Thread inspection (conical ...
Overview This Krones Linatronic M empty bottle inspector, manufactured in 2015, is designed for the reliable inspection of returnable glass bottles in beverage production lines. The system combines multiple inspection technologies including camera-based vision systems, infrared sensors, and high-frequency detection, ensuring the identification of contamination, residual liquids, closure issues, and bottle defects. With a capacity of up to 15,000 bottles and more per hour, the machine is well suited for medium-capacity bottling lines. The unit is equipped with a 3-fold Ecopush rejection system and supports a wide range of bottle types and glass colors, making it a flexible solution for breweries and beverage producers. Technical data Manufacturer: Krones Model: Linatronic M Machine type: Empty bottle inspector Year of manufacture: 2015 Capacity: up to approx. 15,000 bottles per hour and ...
Overview The Heuft InLine IR – high speed empty bottle inspector is characterized by its compact installation dimensions. High-speed inspection of empty bottles is easily possible (up to 50,000 bottles/h). It can perform all standard inspections (sidewall inspection, infeed inspection, neck finish inspection, base inspection, discharge inspection, HF caustic and IR residual liquid detection). In addition, it has a separate module for foreign bottle detection (height, contour, color). In 2016 it was overhauled and modified installed including conveyor control. Tech Specs: Capacity: 5,000 – 50,000 bottles / h Compact installation dimensions 2016 overhauled and modified Features: Processes all standard inspections: sidewall, infeed, neck finish, bottom, discharge, HF caustic and IR residual liquid detection Separate module for foreign bottle detection (height, contour, color)
maximum number of results exceeded
please refine your search
18 € 
