GILDEMEISTER used machine for sale

Gildemeister Sprint 65 Linear CNC lathe (with 2nd spindle, 3 turrets and Y-axis) Diameter of spindle bore 65 mm Spindle speed 5,000 rpm Spindle motor 25/20 kW Spindle speed counter spindle 5,000 rpm X-axis movement 165 / 165 / 165 Movement Y-axis 80 mm Z-axis travel 220 / 150 / 650 mm Movement of the W-axis (counter spindle to the main spindle) 690 mm C-axis indexing 0.0001° Number of towers 3 Number of tools on turret 12 (3x 12) Tool cone VDI 30 Bar Feeder LNS Quick Load Servo 65 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

Gildemeister Sprint 65 Linear CNC lathe (with 2nd spindle, 3 turrets and Y-axis) Diameter of spindle bore 65 mm Spindle speed 5,000 rpm Spindle motor 25/20 kW Spindle speed counter spindle 5,000 rpm X-axis movement 165 / 165 / 165 Movement Y-axis 80 mm Z-axis travel 220 / 150 / 650 mm Movement of the W-axis (counter spindle to the main spindle) 690 mm C-axis indexing 0.0001° Number of towers 3 Number of tools on turret 12 (3x 12) Tool cone VDI 30 Bar Feeder LNS Quick Load Servo 65 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

Control Siemens ... Sinumerik 840 D Turning diameter ... 365mm Rotation length ... 450mm Inclined bed Spindle bore ... 52mm Tool turret ... 12/6 Spindle speed ... 0-6000/min. Main engine power ... 12/16kW Axis C ... 360° Max. rod diameter ... 60mm L x W x H ... 4000 x 1640 x 1730mm Machine weight ... 3500kg The machine is in good condition, possible to test under electricity.

Refurbished 1992 Tapping Multi-edge hammering 1x threaded rods 2x threaded spindles Bar feeder Giovanni Cucchi DBMF 26 (YOC 2001) Lots of accessories

Control Siemens ... Sinumerik 840 D Turning diameter ... 400mm Rotation length ... 600mm Inclined bed Axis Y ... 64mmmm Counter spindle Spindle bore ... 51mm Driven Tools Bar feeder Machine weight... 3700kg Number of spindle deer ... 0-6000/min. Axis X ... 160mm The machine is in good condition, possible to test under electricity.

Key data: 324 mm, 600 mm

CNC lathe GILDEMEISTER CTX 420 linear V 3 With control Heidenhain ELTROPILOT 4290 Year of construction: 2003 Max. rotatable diameter: 324 mm Max. rotatable length: 600 mm Max. circulation diameter: 680 mm Spindle bore: 79 mm Max. spindle speed: 4500 rpm With the following accessories: Slide protection with interior lighting 12-speed turret with 12 driven stations 50 tool holders VDI 40 5 driven tools VDI 40 1 pc Hydraulic Lynette Tailstock with quill Conveyor Hydraulic jaw chuck Forkardt 0 250 mm Foot switch for jaw chuck + tailstock adjustment Coolant device 210 l ( 20 l/min ) 6 bar Operating instructions

Turning diameter 80 mm Bar diameter 20 mm Spindle speed 10000 rpm X1, Y1, Z1, X2,Z2 axes Controller Fanuc FANUC 160iB LNS barfeeder

Turning diameter 380 mm Turning lenght 330 mm Spindle bore 56 mm Spindle speed 6000 rpm Controller Fanuc 32i

- 6 spindles - Guide tubes Equipment according to pictures Available from week 20/2024

Cycle-controlled lathe GILDEMEISTER NEF 720 With control MANUAL PLUS 4110 Year of construction: 2001 Spindle bore: 92 mm Center width: 1500 mm Circulation O above bed : 710 mm Circulation O over face slide: 410 mm Center height: 350 mm Speed range: 36 – 1800 rpm infinitely variable With the following accessories: Slide protection with interior lighting Multifix Tool Holder Coolant system 3 jaw chuck Forkhardt 0 315 mm ICP Contour Programming Tailstock with extendable drill quill Chip pan Operating instructions

Key data: 320 mm, 750 mm

Manufacturer: Gildemeister Model N.E.F. 320 K Year of construction 2004 Condition Used Siemens control system Specifications Circulation diameter 320 mm Turning length 750 mm Speed range - main spindle 3500 rpm Drive power - main spindle 9 kW Bar diameter 50 mm Tool holder Multifix size B Tailstock mount MK 5 Rapid traverse X / Z 8 / 10 m/min Machine weight approx. 2.5 t Space requirement approx. 2500 x 1800 x 1885 mm Accessories: 3 Jaw chuck Forkardt 200 Tool package Documentation

Key data: 520 mm, 625 mm, 5000 1/min

Manufacturer: Gildemeister Model CTX 420 V 3 Year of construction 2004 Condition Used Control Heidenhain iT Specifications Circulation diameter 565 mm Turning length 625 mm X-travel 260 mm Speed range - main spindle 25 - 5000 rpm Drive power - main spindle 25 kW Max. torque 270 Nm Spindle nose 170h5 Rod diameter 65 mm C-axis 0.001° Revolver Stations 12 pos. Tool holder VDI 40 Driven tool stations 12 pos. Speed driven tools 4500 rpm Drive power driven tools 12 kW Max. torque 27 Nm Tailstock mount MK 4 Rapid traverse X / Z 60 / 45 m/min Total power requirement 55 kVA Machine weight approx. 6.0 t Space requirement approx. (without bar feeder) 3495 x 2484 x 1885 mm Accessories/Equipment Bar feeder 3200 mm Iemca Master 880 MP-E Conveyor Parts catcher Conveyor belt C-axis Driven tools Collet Chuck Hainbuch 3 Röhm jaw chuck Too ...

Key data: 225 mm, 640 mm, 4000 1/min

1 pc used CNC lathe Make: Gildemeister Model : CT 40 Control: EPL 2 Built in 1987 Switch-on hours: 2250 hours Specifications Circulation over bed 400 mm Turning length 640 mm Turning diameter 225 mm Spindle size, flat flange 140h5 Spindle bore 72 mm Drive power 11 kW Speed range, infinitely variable 20-4000 min Z-rapid traverse/feed speed 10/5 m/min. X-rapid traverse/feed speed 10/5 m/min. Recording VDI 30 Number of tool positions 12 Length x Width x Height 3260x1720x1650 mm Machine weight 3400 kg Accessories: Hand chuck Documentation

CNC lathe GILDEMEISTER CTX ALPHA 300 with bar feeder and parts pick-up device Built in 2010 in good condition. Duty Cycle: 22930 Hours: 7326 Control Heidenhain CNC-Pilot 640 Circulation over bed: 380 mm Circulation via face slide: 290 mm Spindle bore: 73 mm Flat travel ( X ) : 190 mm Longitudinal travel ( Z ) : 335 mm Speed max. 6000 rpm C-axis 360° Number of driven tool stations 12 pos. Tool holder VDI 30 Accessories: 3 jaw chuck hydraulic 170 mm Conveyor Coolant system Hydraulic hollow clamping device Tool drive C-axis Parts pick-up device Bar Feeder Irco RBK10012 Tailstock

CNC lathe Gildemeister CTX 400-Series 2 - Control/Heidenhain CNC Pilot - Max. circulation diameter / face carriage 470 mm - Max. circulation diameter / bed 570 mm - Max. turning length 600 mm - Infinitely variable speed 25-5000 rpm - Rapid traverse 20/24 m/min - Spindle bore approx. 79mm - Chuck diameter max. 250mm - Disc turret - Cross-section max. 20/20mm - Morse taper tailstock MK4 -Conveyor 9oxqtvdvxq Dimensions approx. LxWxH 5.5x2.5x1.7 meters Weight approx. 5700 kg

Controller FANUC 16i-TB Main and counter spindle: max. rod diameter 12 mm max. speed 12,000 1/min Travel: X1 (linear)= 30, Y1= 195, Z1= 120 mm Y2= 180, Z2= 180 mm Tool holder 1: 5 tools, 4 of which are driven Tool holder 2: 8 Tools Bar feeder FMB minimag 3200

Year of construction 2007 Control Siemens 840D Rotational diameter. [mm] 640 Turning length [mm] 1500 Main Spindle: Motor Spindle Technology Speed 5,000 rpm Power 35 kW Torque 370 Nm C-axis 0.001° Bar passage 65 mm Workpiece clamping 3-jaw chuck, Schunk ROTA NCF plus 315-104 Counter spindle: Motor Spindle Technology Speed 5,000 rpm Power 35 kW Torque 370 Nm C-axis 0.001° Bar passage 65 mm Workpiece clamping 3-jaw chuck, Schunk ROTA NCF plus 315-104 Travel in Z 1,500 mm Tool carrier I (X/Y/Z/B): Technology Milling spindle on cross slide Speed 12,000 rpm Power 22 kW Torque 100 Nm Tool holder HSK-A63 Travel X/Y/Z 550/220/1,585 mm Rapid traverse in X/Y/Z 40/24/70 m/min B-axis 240° Tool carrier II (X/Z): Technology Star turret with 12 stations Tool holders VDI40 Tool drive 4,000 rpm, 10.7 kW, 32 Nm Travel in X/Z 225/1,400 mm Rapid traverse in X/R  ...

Key data: 205 mm, 650 mm

For sale: Gildemeister CNC lathe type Sprint 65 Linear equipped with a Fanuc 310I control. This CNC lathe is equipped with 2 equal spindles with a bar passage of 65 mm. The machine also has three turrets with 12 positions where you can place driven holders in any position! The upper turret is equipped with a Y-axis with a displacement of 80 mm ( (+50, - 30 mm). The turning diameter is 205 mm. The maximum turning length is 650 mm. The movement X1, X2, X3 is 165mm, the Z1 axis movement is 220mm, the Z2 axis movement is 150mm, and the Z3 axis movement is 768mm. The W2 axis movement is 690 mm and the maximum rapid traverses are 30 meters/min. The maximum speed of both spindles is a speed of 5,000 rpm and both spindles have a full C-axis. The tool holder holder on all turrets is VDI-30. The machine is also equipped with a hinged belt chip conveyor with right ejection and the machine has an Ir ...

- Control: FANUC 32i - max. rod Ø: 65 mm - Turret with 12 stations (not driven) - Speed 5,000 1/min -Tailstock -Conveyor - without air filter - Bar feeder TOP-Automazioni XF 475 - Max. bar length 4,200 mm

Universal lathe GILDEMEISTER NEF 320 K With Siemens SINUMERIK 810 DE CONTROLLER (SIMATIC PANEL TOUCH SCREEN) Year of construction: 2001 Spindle bore: 52 mm Center width: 750 mm Circulation O above bed : 320 mm Circulation O over face slide: 150 mm Flat travel : 185 mm Speed range: 14 – 3550 rpm infinitely variable With the following accessories: Slide protection with interior lighting Multifix Tool Holder Coolant system 3 jaw chuck 0 200 mm Tailstock with retractable quill Chip pan Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICESHIP TRAINING THE MACHINE IS IN VERY GOOD CONDITION

Key data: 700 mm

CNC lathe GILDEMEISTER CTX gamma 1250 With control control Siemens 840 D SL with Shop Turn Year of construction: 2009 Travel in X: 480 mm Travel in Z: 1300 mm Spindle bore: 102 mm Turning diameter max. 700 mm Speed range: max. 2500 rpm With the following accessories: Slide protection with interior lighting (automatic sliding hood operation) 12-speed turret with 12 driven tool stations 50 tool holders VDI 50 3 Driven Angle Heads, 2 Driven End Heads C Axis & Spindle Brake (Hydr.), Partial Hollow Clamping Device Tension Tube 104 mm 3 Jaw chuck SMW Autoblock hydraulic (0 500) Direct Displacement Measuring System (X Axis) Tailstock with quill Signal light 4 coloured DMG Netservice on board Coolant system 980 l 8/20 bar with belt filter system Conveyor Coolant spray gun Operating instructions

Cycle-controlled lathe GILDEMEISTER NEF 520 With control MANUAL PLUS 4110 Year of construction: 2005 Spindle bore: 70 mm Center width: 1000 mm Circulation O above bed : 500 mm Circulation O over face slide: 290 mm Center height: 250 mm Speed range: 10 – 3050 rpm infinitely variable With the following accessories: Slide protection with interior lighting 8-speed Sauter Revolver VDI 30 30 VDI 30 tool holders 2 driven tools VDI 30 1 collet chuck Coolant system 3 jaw chuck Röhm 0 250 mm 19 set of soft jaw inserts ICP Contour Programming Tailstock with extendable drill quill Chip pan Operating instructions

Key data: 505 mm, 635 mm, 5000 1/min

Year 2003, Heidenhain iT control system, TurnPlus control extension Tool drive C-axis approx. 4000 spindle hours Turning diameter 300 mm above bed 505 mm Longitudinal stroke Z 635 mm Spindle bore 68.5 mm, max. spindle speed 5000 rpm,  AC main drive21 kW Bar machining package consisting of: - Hydr. Hollow clamping device, tension tube inside max. 67 mm - Workpiece pick-up device - Indicator light Connection for bar loading magazine or bar feeder Accessories: chip conveyor, power chuck Berg KH 200/68              Tailstock, coolant spray gun, partial hollow clamping device l Technical documentation. The machine is still in use and is available for approx. available at the end of December 2023.

Matching bar feeder DMG S Loader, year of construction 2010 unused, lateral sliding device. ( original price at that time 18000,- EUR) Bought for a Guildmaster CTX 310 but never used it.

CNC vertical milling machining center Deckel Maho DMC 635 V ecoline.

GILDEMEISTER MF TWIN 65 Y CNC-Drehmaschine die 1999 in Deutschland gebaut wurde, ermöglicht vollautomatische Produktionsprozesse bei hoher Genauigkeit und niedrigen Betriebskosten. Die Maschine, die sich durch ihre umfangreichen Bearbeitungsmöglichkeiten auszeichnet, ist dank ihrer robusten Bauweise, der umfangreichen Ausstattung und dem Fokus auf hohe Produktivität ideal für jeden Produktionsbetrieb, selbst bei anspruchsvollsten Herausforderungen. Das CNC-Drehzentrum MF TWIN 65Y führt Präzisionsbearbeitungen von Metallwerkstücken mit einem maximalen Durchmesser von 200 mm durch, wobei zuverlässige Werkzeuge in zwei Werkzeugköpfen mit 12 Positionen (oben und unten) eingesetzt werden. Das Drehen der Werkstücke findet in einem großen Arbeitsraum statt, der mit einem um 45° geneigten, starren Bett und einem integrierten Späneförderer ausgestattet ist, der den Arbeitsraum sa ...

Year of construction 2014 Control Siemens 840 Dsl Main Spindle: Motor Spindle Technology Speed 7,000 rpm Power 16 kW Torque 75 Nm Bar passage 50 mm Workpiece clamping collet chuck, Hainbuch Kombi Axfix Gr. 52 Counter spindle: Motor Spindle Technology Speed 7,000 rpm Power 16 kW Torque 75 Nm Workpiece clamping collet chuck, Hainbuch Kombi Axfix Gr. 52 Tool carrier I (X/Y/Z): Technology turret with 12 stations Tool holder VDI 25 Tool drive 8,000 rpm, 1.5 kW, 10 Nm Travel in X/Y/Z 165/70/360 mm Rapid traverse in X/Y/Z 30/15/60 m/min Tool carrier II (X/Y/Z/B): Technology turret with 12 stations and swivel axis Tool holder VDI 25 Tool drive 8,000 rpm, 1.5 kW, 10 Nm Travel in X/Y/Z 215/70/740 mm Rapid traverse in X/Y/Z 30/15/60 m/min B-axis -23.5°/158.5° Tool carrier III (X/Y/Z): Technology turret with 12 stations Tool holder VDI 25 Tool drive 8,000 r ...

Multi-spindle lathe (8 spindles) max. rod diameter 16 mm Guide tubes 4,000 mm Conveyor

Gildemeister CTX Beta 500, Year of construction 2009, Control Heidenhain IT Plus, Travel X/Z 300/550 mm, Y axis +/- 60 mm, Main spindle up to 5,000 rpm, C axis, rods Ø up to 77 mm, 16-speed revolver, VDI 30, Addressed. Tools Interface Bar Feeder, programmable tailstock, Chip conveyor, three-jaw chuck Ø 250mm, 7,200 spindle hours, Accessories

Key data: 500 mm, 635 mm, 5000 1/min

- Control: Heidenhain CNC Pilot 3190/4290 - Software update Turn-Plus - Turning diameter: 500 mm - Turning length: max. 635 mm - Spindle speed: 25-5000 rpm - 12-speed turret, no driven tools -Tailstock -Conveyor