used GILDEMEISTER twin

GILDEMEISTER MF TWIN 65 Y CNC-Drehmaschine die 1999 in Deutschland gebaut wurde, ermöglicht vollautomatische Produktionsprozesse bei hoher Genauigkeit und niedrigen Betriebskosten. Die Maschine, die sich durch ihre umfangreichen Bearbeitungsmöglichkeiten auszeichnet, ist dank ihrer robusten Bauweise, der umfangreichen Ausstattung und dem Fokus auf hohe Produktivität ideal für jeden Produktionsbetrieb, selbst bei anspruchsvollsten Herausforderungen. Das CNC-Drehzentrum MF TWIN 65Y führt Präzisionsbearbeitungen von Metallwerkstücken mit einem maximalen Durchmesser von 200 mm durch, wobei zuverlässige Werkzeuge in zwei Werkzeugköpfen mit 12 Positionen (oben und unten) eingesetzt werden. Das Drehen der Werkstücke findet in einem großen Arbeitsraum statt, der mit einem um 45° geneigten, starren Bett und einem integrierten Späneförderer ausgestattet ist, der den Arbeitsraum sa ...

This Gildemeister TWIN 32 lathe was built in the year 2001 in Germany. It is equipped with a SIEMENS Sinumerik 840D control unit. The machine has a main spindle speed of 8000 rpm. 2 units are available.

Manufacturer: Gildemeister Type: Twin 65 with counter spindle & automation. Year of construction: 2010 Control: Siemens 840D powerline Circulation diameter above bed: 250 mm Flat travel carriage 1: 300 mm Longitudinal travel carriage 1: 650 mm Perpendicular Y-axis: ± 40 Flat travel slide 2: 180mm Longitudinal carriage 2: 650mm Rod passage max: ø 65 Drive power:40/100% 25/37 KW Speed range from – to: 20-5000 rpm Weight approx.: 10.000 kg Equipment: 2x star turret: 12x Driven tools: 12x VDI 40 2 turrets (all stations driven) Tool carrier: 12x VDI 40 2 turrets (all stations driven) Tailstock: Yes + counter spindle MK 4 Quill mounting: Yes Chip Conveyor: Yes Accessories: -Y-axis. -Coolant tank: 980l / 80 bar. -Coolant device for lower turret 8/20/80 bar. -Belt filter system -Mechanical oil mist separators 600m³ with contamination indi ...

BRAND: GILDEMEISTER YEAR: 2001 MODEL: TWIN 32 APPLICATION TYPE: TURNING LOCATION: HUNGARY MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: SIEMENS MODEL: SINUMERIK 840D MAIN DRIVE SPINDLE SPEED RANGE: 8000 1/MIN SPINDLE MOTOR POWER: 26 KW Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - BAR CLEARANCE ON MAIN/COUNTER SPINDLE 32 MM - CLAMPING CYLINDER Ø36MM ON MAIN/COUNTER SPINDLE - 2 / 12-POSITION REVOLVER HEADS, DRIVEN TOOLING (BOTTOM-TOP DESIGN) - TURNING DIAMETER 145MM, NORMAL TURNING DIAMETER 100MM - SPINDLE DISTANCE 580 MM - DRIVEN TOOLS 3. 8 KW, 6000 RPM MAX. - WITH AUTOMATIC DOSING OPENING, PNEUMATIC OPENING

2-revolver turning center Guildmaster (DMG) Type: Twin 65 RG2 V5 Built: 2004 Control: Siemens 840 D Switch-on hours: 37,300 h Spindle hours: approx. 16,250 h Technical data: ----- - Spindle speed Hsp. & Gsp. max.: 5,000 rpm - Spindle bore S1 & S2: 79 mm - Power: 370 Nm at 40% ED - Rod passage Hsp.: 65 mm - Spindle nose: 2x 170H5 - Circulation max.: 250 mm - Rotates max.: 200 mm - Distance between spindles: 900 mm - Peak height: 1,288 mm - Slide path plan X1/X2/X3: 300/180/175 mm - Slide path along lengthZ1/Z2/Z3: 650/650/670 mm - 2x turret with 12 stations each, .. all driven, recording VDI 40 - 2x C-axis - Y-axis in the upper turret +/-40 mm - Part gripper with laxative belt internally - Chip conveyors - Automatic door - Total connection value: 85 kVA - Weight: approx. 10,500 Kg Accessories: ----- - Documentation - Holder package (fixed 20x + driven 1 ...

Year built 2004 OTHER TECHNICAL DATA POWER OF ROTATING TOOLS 4 Kw MACHINE EQUIPMENT Tool holder set supplied DIMENSIONS AND WEIGHT Length 3000 mm Width 2500 mm Height 2010 mm Weight 6700 Kg

turning diameter: 200 mm turning length: 635 mm control: SIEMENS 840D Powerline greates pass round over bed: 250 mm spindle turning speed range: 20-7000 U/min turret head: 2x 12 weight of the machine ca.: 10 t Y- & B- axes Misc. accessories more details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 2 turning diameter: max. 250 mm toll turrets: 2 x 12 control: Fanuc 16 T tool taper: HSK 63 : 04800000181 frequency: 50 Hz ampere: 168 A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: SIEMENS SINUMERIK 840 D Operating hours: 29500 Technical data Number of axis total: 4 Number of spindles: 2 Distance spindle nose: 580 mm Swing over cross-slide: 100 mm Swing over bed: 145 mm Spindle hole: 50 mm Turning diameter: 100 mm Bar diameter with collet: 36 mm Clamping chuck diameter: 140 mm Carriage 1: Longitudinal travel (Z-axis): 320 mm Transversal strocke (X axis): 220 mm Carriage 2: Longitudinal travel (X-axis): 345 mm Cross travel (z-axis): 120 mm Turret slide: number: 2 Number of positions turret 1: 12 Number of positions turret 2: 12 Driven tools turret 1: 12 Driven tools turret 2: 12 Spindle speeds: 30/6000 rpm Spindle speeds: 30/6000 rpm Power of driven tools: 2.1 kW Plage vitesse de rotation rad./axial: 30/6000 rpm Collet bore: 36 mm Spindle speeds: stepless from: 40 rpm up to: 8000 rpm Back spindle: max. speed: 40/8000 rpm Power of back spindle: 26/21 kW st ...

Max. bar diameter: 32mm, max. rotational speed: 8000/min, connected load: 42kVA, control: Siemens 840D, weight: 5.5t, operating/spindle hours: 67,086/53,283h, with bar loader FMB turbo 5-42, inspection is possible, both turrets of the machine have no y-axis.

Year of construction 2001 Siemens Sinumerik 840D driven tools turning diameter 100 mm rotation length 320 mm Rod diameter max.: 36 mm Spindle speed 40 - 8000 rpm Working range X1/Z1 220/320 mm Working range X2/Z2 120/345 mm Distance between spindles 580 mm Spindle head size: 140H5 mm Spindle bore: 50 mm Rapid traverse X1,2/X3/Z 30/20/30 Spindle diameter in the front bearing: 120 mm Conveyor Coolant device Bar loader Weight approx. 6000 kg

turning diameter: 100 mm turning length: 580 mm control: Sinumerik 840 D total power requirement: 50 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 4,8 x 2,2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 100 mm turning length: 210 mm control: Siemens 840 D Powerline tool taper: VDI 25 swing diameter: 145 mm bar material dia.: 42 mm centre distance: 580 mm slide I - cross travel: (X1) 220 mm slide I - longitudial travel: (Z1) 320 mm y-axis: (Y1) +/- 30 mm rapid travel x/y/z: 30/15/30 m/min slide II - cross travel: (X2) 120 mm slide II - longitudial travel: (Z2) 345 mm rapid traverse x + z axis: 30/30 m/min Subspindle:: Ja / yes longitudinal travel: (Z3) 380 mm vertical stroke: (X3) 145 mm rapid traverse x + z axis: 20/30 m/min main spindle speeds:: 35 - 7000 U/min. Subspindle spindle speeds: 35 - 7000 U/min. tailstock quill stroke: 230 mm tailstock quill taper MT: 3 main drive motor: 35 kW Subspindle motor: 35 kW Dimensions (LxWxH): 4200 x 2585 x 2041 mm weight of the machine ca.: 5,3 t Equipment: CNC control Siemens 840 D Powerline. 2 x 12-station turret, all positions  ...

Control: SIEMENS 840C Year of production: 1999 - head 1: 12 tools (all driven sockets + Y axis) - head 2: 12 tools (all sockets driven) - max rpm 5000/min. - 2 x C-axis - Y axis - powered tools - travel in the X1 axis = 220mm - travel in the X2 axis = 220mm - travel in the Z1 axis = 550mm - travel in the Z2 axis = 550mm - travel in the C axis = 0° - 360° (main spindle) - travel along the C axis = 0° - 360° (intercept) - pass-through spindle Fi-66mm - main hydraulic Hainbuch sleeve holder - BISON three-jaw hydraulic catching chuck - finished part collector - Bar magazine and feeder: IRCO SIMAG - high pressure cooling system - chip conveyor - full programming manual - Mechanical and Electrical Documentation - machine weight: 6.5 tons

Two turret drives, sub spindle, Y-axis, tailstock SIEMENS 840 control system Turning diameter (mm) 100 Turning length (mm) 320 Spindle bore diameter (mm) 50 By 36 max. Distance between centers (mm) 580 Places for tools in the turret 1 (pcs) 12 Drive places in the revolver 1 (pcs) 12 Turret stroke 1 X (mm) 220 Turret stroke 1 Z (mm) 320 Places for tools in the turret 2 (pcs) 12 Drive places in the revolver 2 (pcs) 12 Turret stroke 2 X (mm) 120 Turret stroke 2 Z (mm) 340 Spindle speed (rpm) 8000 Total power (kW) 28 Overall dimensions of the machine (length x width x height) 2300x2300x2000 Machine weight (kg) 6000

turning diameter:320 mm turning length:1100 mm total power requirement:65 kW Tool taper:VDI 40 spindle motor:25 kW spindle turning speed range:5 - 4000 U/min work piece power:7,5 kW slide I - cross travel:250 mm slide I - longitudial travel:945 mm slide II - cross travel:198 mm slide II - longitudial travel:1080 mm spindle diameter in front bearing:140 mm spindle bore:79 mm weight of the machine ca.:10 t dimensions of the machine ca.:5,9 x 2,6 x 2,9 m Machine with CNC control FANUC 16 TT - C-axis - 2 revolving heads 12-fold with driven tools - portal loading system optional - coolant device, chip conveyor

bar material dia.:36 mm chuck diameter:100 mm turning length:580 mm greates pass round over bed:145 mm turning diameter:100 mm turning speeds:2x 25-8.000 1/min positive location each:2xC-Achse, 0,001° Grad Sub spindle:ja/yes turret (x-stations):2x 12-fach VDI 25 driven tools:2x 12 turning speeds:31-6.300 1/min control:Sinumerik 840 D total power requirement:50 kVA weight of the machine ca.:6 t dimensions of the machine ca.:4,8 x 2,2 x 2 m turning- milling center with 8-axis (X1:220mm, Z1:320mm, X2:120mm, Z2:340mm, Z3:380mm, C1, C2, Y-axis) high pressure pump 20bar, tailstock on right side, collet device on main and subspindle, parts conveyor, bar magazin IRCO Simag 42.1-R for 3,2m bars, chip conveyor, approx.109.700 hours "machine on", approx. 84.300 hours "spindle on"

Machine is not in working condition, and can be used for spare parts only. , Workspace Chuck diameter: 250 mm Plan transfer stroke X: 800 mm Longitudinal stroke Z: 300 mm Feed Rapid speed X: 100 m/min Rapid velocity Z: 45 m/min Spindle box Spindle head (flat flange): 170h5 mm Spindle diameter in the front bearing: 120 mm Spindle bore: 79 mm Main drive Power of the three-phase hauplan drive: 22 kW Torque ED 100%: 210 Nm Speed range: 20 ? 5000 rpm C-axis Speed range: 0-100 rpm Torque (holding torque brake): 240 Nm Point silence accuracy: < 0.02 degrees Tool carrier Number of tool stations: 12 Tool holder according to DIN 69880 Cylinder shaftdiameter: 40 mm Drive power (40% ED): 10.8 kW Torque: 28 Nm Speed, max.: 6000 rpm Hydraulics Content, complete: approx. 25 L Pressure max.: 80 bar Pressure for clamping device, max.: 70 bar Coolant device Content: approx. 25 L Pump power: 1.7 kW Flow ra ...

Tailstock for Gildemeister CTX 600

DATA ABOUT THE MACHINE Machine type: CNC lathe Manufacturer: Gildemeister Type: CTX400 Year of construction: 1993 Condition: used Location Warstein , Germany Reference M-GIL-0922 DESCRIPTION We offer you a used CNC lathe from the manufacturer Gildemeister NEF. Technical data (without guarantee) Circulation diameter over bed: 500 mm Turning length: 600 mm Number of spindle rotations: 20 - 5000 rpm Number of tools: 12 Spindle bore: 72 mm Tailstock pinole diameter: 80 mm Tailstock pinole stroke: 100 mm Total power requirement: 45KVA Space requirement approx.: 4.5 x 2.0 x 1.8 m Drive for driven tool (tool turret) without function Machine is in continuous production. Availability: From mid-Oct. 2022 Our offer is aimed at commercial persons who are covered within the meaning of the Trade Code according to §14 GewO. The offer is subject to change, subj ...

BRAND: GILDEMEISTER YEAR: 2001 MODEL: NEF 320 K APPLICATION TYPE: TURNING LOCATION: GERMANY MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 1440 MM MEASUREMENTS DEPTH: 2600 MM MEASUREMENTS HEIGHT: 1440 MM CONTROL UNIT BRAND: SIEMENS MODEL: SINUMERIK MAIN DRIVE NUMBER OF SPINDLES: 2 SPINDLE SPEED RANGE: 14 - 3550 1/MIN NUMBER OF AXIS: 2 Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - SWING OVER BED : 320 MM - SWING OVER SLIDE : 150 MM - CHUCK DIAMETER: 200 MM - FACE TRAVEL :185 MM - CENTRE DISTANCE: 750 MM - SPINDLE MOUNTING MK6

GILDEMEISTER GMC 20 ONE Built in 2014 Engine hours: 22504 (as of 17/10/2018) 6-spindle rod machine with Siemens Control 840 D Powerline - 5 cross-slide layers 1;2;3;4;5 - 2 side slides position 6:1 for cutting off and 1 for back processing - 1 drive for pick-up spindle - 1 set of collets - Pump for tool cooling 250L/min at 3 bar - Central lubrication system Optional / Accessories â?¢ -Independent feed for longitudinal slide guide block (movement of the guide block such as CNC axis) â?¢ Drive for frontal spindle Pos. 2, max. speed = 6000 rpm â?¢ Drive for frontal spindle Pos. 4, max. speed = 6000 rpm â?¢ Drive for frontal spindle Pos. 5.max. speed = 6000 rpm â?¢ Pneumatic workpiece unloading slide for Pos. 6, including pneumatic unit â?¢ Workpiece conveyor belt â?¢ Hinge belt conve ...

Machine Details Stock number 1105-03811 Machine type CNC lathe - inclined bed machine Brand GILDEMEISTER Type CTX 410 Year of construction 2004 Control type CNC Control HEIDENHAIN TURN PLUS Storage location FRANCE Country of origin Germany Delivery time available at short notice Freight Base EX WORK Technical details Turning diameter 320 mm Turning length 600 mm Turning diameter 320 mm Travel - x 260 mm Travel - z 635 mm Orbital diameter 680 mm Orbital diameter via slide 365 mm Spindle bore diameter 87 mm Turret head (x-fold) 12 Main spindle speed heidenhain turn plus 1/min Rapid traverse X + Z - axles 24/30 m/min Drive power - spindle motor 21 kW Control HEIDENHAIN TURN PLUS Power supply 40 kVA Information control HEIDENHAIN TURN PLUS 2 AXIS MACHINE 12-fold turret VDI 30 Spaneforderer

Control: Siemens 840D Solution line, Auto bar loader: Top Automazioni XF 375

Key data: 600 mm, 1250 mm, 3000 1/min

Machine Details Stock-No. 1105-03939 Type of machine CNC Lathe - Inclined Bed Type Make GILDEMEISTER DMG Type NEF 600 Year of manufacture 2006 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time immediately Freight basis EX WORK Price Technical details turning diameter 600 mm turning length 1250 mm control SIEMENS 840 D greates pass round over bed 600 mm centre height 350 mm Spindle Bore 92 mm turning speed range 3500 rpm Rapid Travel - Longitudinal/Face 20 m/min face stroke 400 mm tailstock quill diameter 100 mm Tailstock Quill Stroke 1150 mm tailstock taper MT 5 Turret (X-Stations) 12 turning diameter over slide 410 mm Additional information Acc. 3-Jaw Chuck 315 mm, tailstok turret 8 P ,chip conveyor, coolant CNC Siemens 840 D