gia used for sale

Manufacturer: Giardina Lackwalze 1450 mm Poore Neu NeuGiardina, Spare roller: Öl Walze, Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1450, Stahlkerndurchmesser ca. mm: 170, Diameter of neck: 30-40-60/40-60, Total lenght mm: 1820, Wedge follower: yes, Rubber coating defective: schleifen,

GIARDINA GROUP automatic powder coating line was built in 2018 in Italy by Giardina Finishing S.r.l. The line is characterised by a low level of wear, with a total operating time of approximately 6 months. During this period, it was used for coating panels intended for sectional doors. The GIARDINA GROUP powder coating line was designed for the comprehensive powder coating of flat metal components with maximum dimensions of 6000 x 1300 mm. The entire process is performed continuously, without the need for manual handling of the components. Transportation of parts between the individual stages is performed using a conveyor system. The system consists of: – BR-6000 loading roller conveyor – Dualtech 416 SB Dry automatic spraying machine – electronic control system with a PLC controller and touch screen – GPM/5 multi-level horizontal powder coating curing oven with hot air ...

Manufacturer: Giardina, Type: G02/05, Year: 2008, Control: Giardina, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-120, Working height: 900, Lackauftragseinheiten: 1, Vorschub Transport m/min min - max: 7-20, kW - Leistung Transport: 1,0, Durchmesser Auftragswalze mm: ca.240, Reverse und Gegenlauf: yes, everse drive: yes, rbakel: yes, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Pump system: Membrane, Carriage: yes, Strassenbetrieb: möglich, Carriage: yes, Year :2008

Manufacturer: Giardina, Type: G02/05, Year: 2008, Control: Giardina, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-120, Operating side: links, Working height: 900, Lackauftragseinheiten: 1, Vorschub Transport m/min min - max: 7-20, kW - Leistung Transport: ca.1,2, Auftragswalzengeschwindigkeit m/min min-max: 720, Gummierte Auftragswalze(n): yes, Durchmesser Auftragswalze mm: ca.240, Reverse und Gegenlauf: yes, kW - Leistung Dosierwalze: yes, rbakel: yes, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: band, Pump system: membrane, Carriage: yes, Electronic control board: yes, Strassenbetrieb: möglich, Einbaulänge Auftragsmaschine mm: ca.900, Carriage: yes, Year :2008

UV DRYER GIARDINA FOR HEIDELBERG 52 -Max size 36x52 cms. -UV dryer Giardina model 601/2 Year 1998, totally programmable -Low pile delivery, 2 UV lamps installed 600 W each -Air extraction motor, pipes -Max power 22 KW, 51 Ampere -2,5 meters length

Giana lathe mod. GFP14 - 710x 5300 - year 2007, control FAGOR GFP14

Manufacturer: Giardina, Working length mm: 4100, Working widht mm: 1400, Total hight mm: 950, Feeding speed max m/min: ca 25, Feeding speed min m/min: ca 10, Feeding speed continous adjustable: yes,

Manufacturer: Giardina Lackwalze 1450 mm 60 shore gerillt Neu, Giradina: yes, Roller rubber coating: 1450, Shore Härte: 60, Approx. thickness of rubber coating in mm: ca.30, Creasing on a 1 cm: gerillt,

Vacuum coating system with UV dryer/hardener Manufacturer: Giardina Year of construction: 1998 Paint shop Model: MCD/5 UV Dryer Model: SPC/12

Manufacturer: Giardina 1450 mm 40 shore 10 Gummierung , Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1450, Approx. thickness of rubber coating in mm: 10,

Manufacturer: Giardina, Type: Dualtech 401, Year: 2007, Control: Programm, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 1500, Spraying line: Ja, Conveyour system: Band, Laquer circles: 3, by rollers: Ja, Jet dryers (number): 2, Sanding machines (number): 1, Design sanding machine no 1: Costa CT 32/1350, IR dryers (number): 1, Belt conveyors (number): 1, Jet dryers (number): 2, Year :2007

Coating roller machine, roller application machine -Transfer in current condition as seen -Manufacturer: Giardina -Max. Width: 1260 mm -Casting gap: adjustable -with: 3x brush units -Connection power: 11 kW -Dimensions: 4600/2360/H1600 mm -Weight: approx. 4000 kg

Hersteller : Giardina, Spare roller: UV Walze, Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1450, Shore Härte: ca.30, Approx. thickness of rubber coating in mm: 30, Stahlkerndurchmesser ca. mm: 170, EPDM: Poore 2, Diameter of neck: 30-40-60/40-60, Total lenght mm: 1820, Wedge follower: yes, Rubber coating defective: Neu,

Manufacturer: Giardina Lackersatzwalze 1450 mm shore 25 30Gummi, Giradina: yes, Rubber coating length cm: 1450, Shore Härte: 25, Approx. thickness of rubber coating in mm: 30,

Manufacturer: Giardina, Working length mm: 3500, Working widht mm: 1400, UV-Band: ca 920, UV conveyor belt: 120, Bandkühlung: 60, Frequency converter: yes, Engine power kW: 3500 X 1700, Belt 13 length width mm: Spezialband mit Vibrationsmotor um Wasserbestand und Verlauf des Materials zu egalisieren,

Manufacturer: Giardina, Working length mm: 5000, Working widht mm: 1400, Total hight mm: ca 920, Feeding speed max m/min: 20, Feeding speed min m/min: 8, Feeding speed continous adjustable: yes, Belt 1 length width mm: 5000 X 1700,

Manufacturer: Giardina 3500 mm 1350 mm, Working length mm: 3500, Working widht mm: 1400, UV-Band: ca 920, Bandkühlung: 6,7, Frequency converter: yes, Engine power kW: 3500 X 1700, Belt 13 length width mm: Vorschub bei 50 Hz 6,7 M/min Istzustand/ über Frequenzumrichter mögliche Geschwindigkeit ca.20-25 M/min,

Manufacturer: Giardina Ersatzwalze 1452 shore 60 Gummi 20 mm Neu, Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1452, Shore Härte: 60, Approx. thickness of rubber coating in mm: 25,

Manufacturer: Giardina, Working length mm: 4100, Working widht mm: 1400, Total hight mm: 950, Feeding speed max m/min: ca 25, Feeding speed min m/min: ca 10, Feeding speed continous adjustable: yes,

Manufacturer: Giardina, Type: Rollbahn, Year: ca.2005, Driven: yes, driven: yes, Length-width mm: ca.980, Total hight mm: 890 +/-, Adjustable: yes, Roller pitch mm: ca.220, Conveyor speed m/min: 10-25, Year :ca.2005

Manufacturer: Giardina, Type: G 84/20, Year: 1994, Control: yes, Brush type: gekordelt, Diameter of brushes: 150, Compressed air cleaning: yes, Number of units: 2, kW Leistung Motoren: ca.2, Number of rotations controlled: yes, Fast exchange device: no, Working width mm: 1400, Through running hight mm: 150, Vacuum belt: no, Feeding speed continous adjustable: yes, Feeding speed min-max m/min: 7-21, kW-Vorschub: ca.1,5, Operating side: rechts, Product detection: no, Electrical hight adjustment: yes, rotor jets: yes, Year :1994

Manufacturer: Giardina, Type: GST 1400, Year: 2005, Work piece width min-max mm: 50-1350, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-60, Working widht max mm: 1300, Number of lamps: 1, kW power 1 lamp: 12, Lampen gerade eingebaut: yes, Adjustable: no, Power per lamp watt UV: 80, od distance mm: 100, Conveyor lenght mm: 2000, Outer belt width mm: 2450, Feeding speed m/min: 8-20, Conveyor: Stange, Drive power kW: 1,2, Year :2005

Manufacturer: Giardina, Type: MOS-Micrwellentrockner, Year: 2008, Control: Programm, Channel width in mm: 1500, Channel height in mm: 2000, Channel length in mm: 2900, Heating zone length in mm: MOS, Thermal output: 30.000 kcal H²O, Damper register - items: 1 Vorlauf 75/55 Grad, Heating battery: 1, Year :2008

Manufacturer: Giardina 3 D UV-Trockner, Type: GST 1400/3 Albatros, Year: 2005, Work piece width min-max mm: 100-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-60, Number of lamps: 3, kW power 1 lamp: 12, Lampen gerade eingebaut: yes, Adjustable: yes, Position of lamps: gerade, Power per lamp watt UV: 80, od distance mm: 120, Conveyor lenght mm: 3500, Feeding speed m/min: 2-7, Drive power kW: 1,5, Electrical power consumption kW: 44,1, Year :2005

Manufacturer: Giardina 1450 mm 20 shore 25 Gummierung Neu, Spare roller: Ölwalze, Giradina: yes, Rubber coating length cm: 1450, Shore Härte: 18, Approx. thickness of rubber coating in mm: 25, Stahlkerndurchmesser ca. mm: 170, Diameter of neck: 30-40-60/40-60, Total lenght mm: 1820, Wedge follower: yes,

Manufacturer: Giardina Lackwalze 1450 mm 30 shore gerillt Neu, Spare roller: UV Walze, Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1450, Shore Härte: ca.30, Approx. thickness of rubber coating in mm: 35, Stahlkerndurchmesser ca. mm: 170, Creasing on a 1 cm: gerillt, Diameter of neck: 30-40-60/40-60, Total lenght mm: 1820, Wedge follower: yes, Rubber coating defective: Neu,

Hersteller : Giardina, Spare roller: UV Walze, Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1450, Shore Härte: ca.30, Approx. thickness of rubber coating in mm: 30, Stahlkerndurchmesser ca. mm: 170, Diameter of neck: 30-40-60/40-60, Total lenght mm: 1820, Wedge follower: yes, Rubber coating defective: Riss,

Manufacturer: Giardina Lackwalze 1450 mm ca 35 shore muss geschliffen werden, Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1450, Shore Härte: 18, Approx. thickness of rubber coating in mm: 35, Stahlkerndurchmesser ca. mm: 170, Diameter of neck: 30-40-60/40-60, Total lenght mm: 1820, Wedge follower: yes,

Manufacturer: Giardina Lackwalze 1450 mm 55 shore Neu, Giradina: yes, Rubber coating length cm: 1450, Shore Härte: 50, Approx. thickness of rubber coating in mm: ca.20, Stahlkerndurchmesser ca. mm: 190,

Manufacturer: Giardina, Type: MCD, Year: 1992, Work piece width min-max mm: 80 - 240, Min.-max. workpiece height in mm: 80 - 240, Feeding speed m/min: 15 - 50, Electrical power consumption kW: 48, FREE TEXT: 6 UV Röhren - 30 KW, Year :1992

Manufacturer: Giardina Lackwalze, Year: 1999, Control: Siemens, Program: yes, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 3-80, Durchlassbreite min-max mm: 1400, Working height: 890, Lackauftragseinheiten: 1, Vorschub Transport m/min min - max: 5-25, kW - Leistung Transport: ca.1,5, Auftragswalzengeschwindigkeit m/min min-max: 5-25, Gummierte Auftragswalze(n): yes, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Rolle, Pump system: Membrane, Carriage: yes, Electronic control board: yes, Strassenbetrieb: möglich, Einbaulänge Auftragsmaschine mm: 900, Carriage: yes, Year :1999

Manufacturer: Giardina , Type: Wasser UV Spritzstrasse, Year: 2005, Maschinensteuerung übergeordnet: yes, Work piece width min-max mm: 900, Work piece hight min-max mm: 10-100, Work piece length min-max mm: 4500, Feeding speed m/min: 2-6, UV track: yes, Wasserlackstrasse + UV: yes, Inlet conveyor: 2500, Dedusters: yes, Spraying machine: Dualtech 301, 2 Lackkreise: yes, Belt conveyor: yes, Einlaufrollgang: yes, Angular transfer: yes, Microwellentrocknung: yes, Jet drier mm: yes, Heating medium hot water: yes, Outlet roller conveyor mm: yes, UV Trockner Lampen: 2 von oben 1 von unten, Wattleistung: 120, Adjustable: yes, Outlet transport mm: 4500, Jet drier: 1, Inlet conveyor: 2500, Spraying heads - total: 4, work piece detection: yes, Conveyour system: Rolle-Band, Spraying stations: 2, Fast exchange system spray gun carrier: yes, Laquer system - airmix: yes, Laquer recharging: yes, by rol ...

Manufacturer: Giardina, Type: Lackwalze, Year: 1996, Control: Programm, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 6-120, Working widht max mm: 1350, Operating side: links, Working height: 920, UV-laquer roller: yes, Widht of roller coater: 1300, Application roller drive m/min: yes, Widht of metering roller: 1300, Attachment bracket roller: yes, everse drive: yes, rbakel: yes, Feeding speed min/max: 8-25, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Rolle, Pump system: Membrane, Compressed air bar: 6, Year :1996

This Giardina RICHFRUITS / NEOMEC / KREMLIN Painting Line was manufactured in 2019. It features a comprehensive system for MDF or HDF boards, including dual circuit spray booths for clear and colored lacquers, designed for water-based UV lacquers. The line includes various elements like spray coating machines, drying tunnels with IR lamps, UV tunnels, and roller conveyors, all driven by KREMLIN pumps and spray guns. Contact us for more information about this machine.

A 4-level vertical dryer Giardina with a paternoster system for water-based and solvent-based coatings with flash-off, heating and drying zones is available. Workpiece length range: 300mm-3200mm, workpiece width range: 0mm-1350mm, workpiece height range: 0mm-80mm, working height: 950mm, door arrangement: vertical, number of doors: 16, number of trays: 66, levels: 4, accessibility: all sides, number of heating coils: 3. Machine dimensions X/Y/Z: approx. 5350mm/7550mm/6550mm, electrical cabinet dimensions X/Y/Z: 2500mm/500mm/2000mm. Documentation available. An on-site inspection is possible.

2020 Giardiana DUAL TECH 420 SBC DRY Overall dimensions - Width: 4850 mm - Length: 4930 mm - Max height: 2845 mm - Working height: 900 mm (+/- 50) Workpiece capacity - Width: 100–1300 mm - Length: 100–2800 mm - Max thickness: 50 mm Electrical - Voltage: 400 V - Motor protection: ATEX3G + PTC - Total power: 14.5 kW Paper belt conveyor - Speed: 1–3 m/min - Gearbox: S301P 1:8.9 P.71 B3 - Motor: 0.37 kW Infeed conveyor - Speed: 2–6 m/min - Gearbox: VF44FA1100 P63 B5 B3 - Motor: 0.18 kW Central conveyor - Speed: 1.5–4.5 m/min - Gearbox: C323P 1/136 P71 B3 - Motor: 0.37 kW Outfeed conveyor - Speed: 2–6 m/min - Gearbox: VF 44 P 100 P63 B5 B8 - Motor: 0.18 kW Spray guns - Quantity: 4 - Model: TT1301 MACH5 UG.09-154 FILTERMEDIA Spray gun drive system - Gearbox: C322P 7.2 SK110B B7 - Motor: brushless - Gun travel speed: 0–120 m/min Air supply unit - Intake air flo ...

4 sides trimming line

CATALOG NUMBER 6059 TECHNICAL DATA - number of horizontal spindles 2 × 20 pieces - number of vertical spindles 1 × 20 pieces - spacing of extreme spindles 610mm - spacing between spindles 32mm - stroke of the feed cylinder 60mm - max. length of the workpiece: 3400 mm - adjustment of horizontal spindles up / down, front / back - right / left adjustment of vertical spindles - possibility of working on each drilling apparatus separately - right drill - left, threaded (screwed) - 3 pneumatic clamps - engine power 4 × 1.85 kW - air demand 6-8 bar - dimensions length / width / height 4600x1180x2200mm - weight about 1500 kg Net price: PLN 18 900 Net price: 4345 euros depending on the price, 4.35 euros (Prices may vary with higher fluctuations)

Manufacturer: Giradina Lackwalze, Type: gelaufen in Maschine BMG/95/07, Year: 1998, Year :1998

Manufacturer: Giradina Lackersatzwalze 1300 shore 35, Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1300, Approx. thickness of rubber coating in mm: ca 25,

Manufacturer: Meinert, Type: ApstapelanlageMeinert P420-Y/Z-SCH, Year: 2005, Control: 3 Tec, Program: yes, Stacking device: yes, Work piece length max mm: 5200 X 1200, Work piece length min mm: 500 X 5200, Work piece width max mm: 1200, Stack height in mm: ca.1500, Number of stacks: 14, Stack upper edge mm: 1500, Workpiece weight/stack position in kg: ca.120, Start of stack in mm: Boden, Number of sucking lines: 2, Feeding speed max m/min: ca.60, Year :2005