10 GFM used machine for sale

Complete Mechanical Upgrade by GFM, with increase of Power to 900 Ton/hammer and new CNC in 1991 Numbers ̈of Hammers: 4 Forging force: 3.600 Ton (900t per hammer) Strokes per minute: 270 Maximum diameter of forging: - circular cross section: Ø 400 mm - square cross section: 320 mm Minimum output diameter: - circular: 60 mm - square: approx 50 mm Maximum length of forging with/without lateral reception: 8.000 mm / 9.700 mm Feed of manipulator A: 7.140 mm Feed of manipulator B: 9.940 mm Workpìece weight: 2500 kg Total power supply (nominal power): ca 1.600 kW Machine weight: 493.000 kg

Crankshaft milling machine GFM FKP-60 CNC Mfg. 1984. Very good condition. Very low working hours Max. work piece length: 6000mm Max. working length: 5800mm Center height (without retaining wedge): 2100mm Max. stroke of clamping head: 5800mm Max. stroke of longitudinal carriage: 5995mm Max. stroke of portal: -X axes (horizontal): 910mm (2x 442+13) mm Max. stroke of milling carriage -Y axes (vertical): 910mm (2x 442+13)mm Rapid Speed of longitudinal carriage: 3975mm/minute Rapid Speed of portal: 2982mm/minute Rapid Speed of milling carriage: 2982mm/minute Portal feeds:0...2000mm/minute Milling carriage feeds: 0...2000mm/minute Power: 200kW Cutting head diameter: 720mm Outer diameter of cutting head:1680mm Cutting head RPM: 41.5-48-54.4 Cutting speed: 95-110-125m/minute Cutting head diameter: 1050mm Outer diameter of cutting head:1680mm Cutting h ...

Radial Forging Machine GFM SXL-32 The main equipment includes: - Manipulator A - Manipulator B - GFM 32 forging machine - N° 2 loading and unloading clamps - Transport roller track Technical data: - No. of forging hammers: 4 - Forging pressure of each hammer: 500 Mp = 5,000 bar - N° of strokes for each hammer: 310 strokes/min - Rated power each forging motor: 2 x 250 kW - Hydraulic pump motor power: 100 kW - Loading - unloading pincers motor power: N° 2 x 37 kW - Hammer length: 480 mm - Maximum raw piece diameter: 320 mm - Max hammer adjustment area: 210 mm - Largest forging diameter: Non-alloyed and low-alloy construction steel: 320 mm/Ø ….. 290 mm/Ø Biggest clamping diameter in clamping head: 320 mm High and special-alloyed steels: smaller dimensions - Max workpiece length: 3000 mm - Rapid traverse spee ...

CNC Radial Forging Machine GFM mod. SXL-16 Manufacture: GFM (Austria) YOM: 1974 / 2022 Machine number: 1293 PLC: Siemens S7 - Technology V4.2 with CNC Bosch Rexroth XM Numbers of Hammers: 4 Forging force: 800 Ton (200 t per Hammer) Strokes per minute: 580 Hammer length: 320 mm Maximum hammer setting scope - calculated by diameter: 100 mm Maximum diameter of forging regarding: - structural steel: circular cross section – Ø 160 mm square cross section – 130 mm - high alloy steel: circular cross section – Ø 120 mm square cross section – 100 mm Extreme quadrangle: 12 x 120 mm Maximum length of forging: 6000 mm Min and Max diameter of mounting in manipulator: 30 - 160 mm Feed of manipulator A: 6800 mm Feed of manipu ...

CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 New CNC Control SIEMENS SIMATIC Machine number: 1276 No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Manipulator B max. displacement: 7150 mm Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Machine dimensions: Forging height over floor: 615 mm Total height pf the machinr over floor: 16 ...

Cold Radial Forging Machine GFM SX-10 YOM: 1971/2024 CNC: Siemens SINUMERIK ONE with PLC 1500 Forging Box Number of forging hammers 4 Max. forging force per hammer 1250 kN Number of strokes 1200 1/min Hammer lenght 135 mm Diameter setting range 60 mm Forge eccentric 3,5 mm Chuck head Clamping force max. 50 kN Advance speed max. 20000 mm/min Stroke 1290 mm Workpiece rotation 35-71 1/min Workpiece lenght max. 900 mm Counter holder Clamping force max. 50 kN Advance speed max. 20000 mm/min Stroke 1290 mm Mandrel Clamping force max. 20 kN Advance speed max. 18000 mm/min Stroke 800 mm Dimensions Lenght approx. 9100 mm Width (with electrical cabinets an ...

- workpiece diameter d680 - max workpiece length 3400 mm - max working lengths 2600 mm - with discs (d1100 mm) - required electric capacity 60 kW/h - under power, in use

Box with crankshaft fress

diameter: 400 mm workpiece length: 8000 / 9700 mm number of blows: 4 Forging power: 3600 (4x 900) kN no. of strokes: 270 Hub/min length: Hammer 610 mm Material Inlet Diameter: round: 400/ Square 320 mm Control: GFM CNC total power requirement: 1600 kW weight of the machine ca.: 493 t dimensions of the machine ca.: 44 x 20,5 m The line was mechanically overhauled in 1991 with an increase in forging force to 900 tonnes/hammer and a new CNC control system - CNC control GFM CNC - Forging machine SX-40 - 2 manipulators with beds -- Manipulator A - stroke: 7140mm -- Manipulator B - stroke: 9940mm -- Maximum diameter in the manipulator: 400 mm -- High travelling speed of the manipulator: 500 mm/sec. -- Feed speed of the manipulator: 10 - 200 mm/sec. infinitely variable - Loading/unloading: -- Loader: max. load capacity: 2500 kg --- max. workpiece length: 3000 mm --- Minimum workpiece length: 15 ...

diameter: 130 mm workpiece length: 4000 mm number of blows: 4 Forging power: 1600 per Hammer kN no. of strokes: 620 Hub/min length: Hammer 270 mm Material Inlet Diameter: round: 130 / Square 115 mm total power requirement: 280 kW weight of the machine ca.: t dimensions of the machine ca.: 24,7 x 16 m The line is complete with: - Forging Machine SX-13 - 2 (two) Manipulators with Beds -- Max. diam. in the Manipulator: 130 mm -- Manipulator torque force: 3 kN -- Manipulator high travel speed: 500 mm/sec. -- Manipulator feeding speed: 15 - 200 mm/sec. infinitely variable - Loading / Unloading Devices -- Bar Loader: max. load capacity: 300 kg -- max. work piece length: 2.100 mm -- min. work piece length: 00 mm -- Bar Unloader: max. load capacity: 300 kg -- max. work piece length: 4.000 mm -- min. work piece length: 500 mm - Electrics with Controls and Pulpits - Hydraulics and Pneumatics Curre ...