ger sca used for sale

General SKU276P416 LocationBarneveld MakeGericke (CH) Type50 No.2003 Year of construction1992 Pressure Working pressure3.9 Bar Main Features MaterialStainless steel Volume50 Ltr. Pressure3.9 Bar Specified Features - Pneumatic conveying system MaterialStainless steel 1.4571 (316Ti) Pneumatic air conveying systems Capacity50 Ltr Dished topcheck Dished bottomcheck Top connectionshopper (D600xd180xh700mm) with butterfly valve with actuator Outletdia.50mm, (butterfly halve with actuator) Max. temperature80 degr.C Information Mounted on consolesmobile Floorspace1,2x0,8 M Total height2,0 M Weight220 KGPneumatic conveying systemsGerickeConveying systems > Pneumatic conveying systemsBrand > Gericke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome ...

General SKU276P415 LocationBarneveld MakeGericke (CH) Type50 No.50.2154 Year of construction2002 Pressure Working pressure3.9 Bar Main Features MaterialStainless steel Volume50 Ltr. Pressure3.9 Bar Specified Features - Pneumatic conveying system MaterialStainless steel 1.4541 (321) Pneumatic air conveying systems Capacity50 Ltr Dished topcheck Dished bottomcheck Top connectionshopper (D500xd180xh700mm), with butterfly valve and actuator Outletdia.50mm, with butterfly valve and actuator Information Mounted on consolesmobile Floorspace1,1x0,8 M Total height1,8 M Weight220 KGPneumatic conveying systemsGerickeConveying systems > Pneumatic conveying systemsBrand > Gericke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine  ...

General SKU276P412 LocationBarneveld MakeGericke (CH) TypePTA 20 No.20.3032 Year of construction2004 Pressure Working pressure3.9 Bar Main Features MaterialStainless steel Volume20 Ltr. Pressure3.9 Bar Specified Features - Pneumatic conveying system MaterialStainless steel 1.4571 (316Ti) Pneumatic air conveying systems Capacity20 Ltr Dished topcheck Dished bottomcheck Top connectionsCone valve DN200 with actuator Outletdia.50mm (butterfly valve with actuator) Information Mounted on consolesmobile With switchgearcheck Floorspace1,2x1,0 M Total height1,3 M Weight170 KGPneumatic conveying systemsGerickeConveying systems > Pneumatic conveying systemsBrand > Gericke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Ba ...

General SKU276P418 LocationBarneveld MakeGericke (CH) Type50 No.50.3012 Year of construction2004 Pressure Working pressure3.9 Bar Main Features MaterialStainless steel Volume50 Ltr. Pressure3.9 Bar Specified Features - Pneumatic conveying system MaterialStainless steel 1.4571 (316Ti) Pneumatic air conveying systems Capacity50 Ltr Dished topcheck Dished bottomcheck Top connectionshopper (D500xd180xh450mm) Outletdia.50mm, with butterfly valve and actuator Max. temperature80 degr.C. Information Mounted on consolesmobile With switchgearcheck Floorspace1,9x1,0 M Total height1,5 M Weight250 KGPneumatic conveying systemsGerickeConveying systems > Pneumatic conveying systemsBrand > Gericke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ins ...

General SKU276P411 LocationBarneveld MakeGericke (CH) TypePTA 50 Mach.No.50.3017 Pressure Working pressure3.9 Bar Main Features MaterialStainless steel Volume50 Ltr. Pressure3.9 Bar Specified Features - Pneumatic conveying system MaterialStainless steel 1.4571 (316Ti) Pneumatic air conveying systems Capacity50 Ltr Dished topcheck Dished bottomcheck Top connectionsCone valve DN200 with actuator Outletdia.50mm (butterfly valve with actuator) Max. temperature80 degr.C. Capacity50 Ltr Information Year of construction2004 Mounted on consolesmobile With switchgearcheck Floorspace1,4x1,1 M Total height1,4 M Weight170 KGPneumatic conveying systemsGerickeConveying systems > Pneumatic conveying systemsBrand > Gericke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwid ...

General SKU326S596 LocationBarneveld MakeGericke TypeGMS 300 No.1005 Year of construction1991 Main Features MaterialStainless steel Volume240 Ltr. Motor4 KW Specified Features - Powder turbo mixer Paddle mixercheck Powder turbo mixers Powder turbo mixercheck Capacity300 ltr. Useful capacity240 ltr. Trough sizes840x870x470mm Inlet305x310mm Top connectionsdia. 35mm (1x) Inspection hatch400x240mm Outlet300x100mm Glands air purgedcheck Motor4 kW 380 Volt With lump breakercheck Motor2,2 kW 230-240/400-415 Volt Speed lumpbreaker2772 rpm MaterialStainless steel Information Total height1,6 M Weight900 Kg Floorspace1,8x1,2 MPowder turbo mixersGerickeMixers > Powder turbo mixersBrand > Gericke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome  ...

General SKU292N353 LocationBarneveld MakeGericke ag Main Features MaterialStainless steel Specified Features - Silo MaterialStainless steel Silocheck Closedcheck Diameter1000mm Cylindrical height1300mm Conical height800mm Flat topcheck Inlettangential (1x)80mm,( 1x)120mm Top connectionsts systemfilter 1194 0997/2 OutletGericke RA 550, dia 200mm Information Floorspace1,4x1,4 M Total height3,2 M Weight500 KGSilosGerickeTanks > SilosBrand > Gericke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Additional title: steam distillation system, Power: 1600 W, Current: 7 A, Voltage: 230 V, Frequency: 50/60 Hz

Overview  The labeler was manufactured in 2013 by the German manufacturer Gernep. The machine was regularly maintained by OEM and had a full renovation in the end of 2019. The labeler is already dismantled. Technical details  Output: approx. 8,500 bottles/h   Formats 33 cl Vichy – Longneck – 30 cl BNR ; Neck, front and back label. 2 different front label format parts 33 cl longneck; 75 cl Bierre Belge bottle Corked; Neck, front and back label. Stainless steel bottom frame Rotation: clockwise Right to left bottle transport 5912 running hours Air driven glue pumps replaced by electrical driven glue pumps.

General SKU267N238 LocationBarneveld MakeGerhard+Rauh GmbH TypeRZE counterflow column, DN900/700 No.6321 Year of construction1996 Pressure Working pressure1 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume4000 Ltr. Motor5.5 KW Specified Features - Extraction Capacity4000 Ltr Diameterdia. 700 mm Length10 m Max. temperature95 °C With rotorcheck Motor5.5 kW (230/400 V) With variable speed drivecheck Rotor speed88 rpm MaterialStainless steel 1.4539 (904L) Information Floorspace1,2 x 1,2 m Total height12 m Weight3000 kg ATEX compatiblecheck Technical specs Extra information-1/1 bar working pressureExtractionGerard + RauColumns > ExtractionBrand > Gerard + Rau What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspec ...

- Working wheel diameter: 600 mm - Grinding wheel width: 500 mm Conversion of the grinding machine with automatic plunge - automatic diamond coating with adjustment of ribs Machine repair with modification

1 head labeling machine, designed for the labeling of self-adhesive materials on any type of container or solid product (cylindrical or rectangular containers). Dimensions of the product to be labeled Max/min height: unlimited / 15mm Max/min width: 100mm / 15mm Dimensions of the reel Max/min height: 115 / 10mm Length min: 10mm Includes TIDIREFI marker type T127P with 12,9mm marking width and up to 6 lines of text. DOCUMENTATION AVAILABLE

Drying, blending, degassing, agglomerating system for plastic materials and more Automatic process. No operator needed. Italian technology and material quality standards. Used machine reconditioned Very versatile, can be used for a variety of applications: PAPERMILL PULPER, MIXED PLASTICS, but also ORGANIC MATERIALS to be dried and compacted, PEAT SUBSTITUTE, etc. Output is a continuous stream High ROI Installed power 400 kw – average power consumption 260 kw/h Low maintenance costs Ideal for 24/7 shifts On this link you’ll see the machine connected to an extruder: https://youtu.be/Q3Ayg62mfh8

VERTICAL MIXER, 10 m3 capacity, total height approx 5.400 mm including transmission group, max Ø 2.300 mm., constructed in painted electro-welded carbon steel., inner auger diam.350 mm. lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door on bottom of cone for complete discharging, with safety opening, side discharging pipe to big bag with valve at 2.500 mm from ground, max electric level indicator, paddle type, automatic greasing kit, 11 kw drive, complete with control panel., electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance and instruction manual

GUILLOTINE REEL SLITTER, - These reel splitters are particularly recommended to reduce the size of scraps before a further recycling process. They are ideal for paper, plastic, fabric, rubber, polylaminated, AL foil, in the shape of REELS, BALES, LOOSE MATERIAL, FIBERS, and more., - Proposed in different standard dimensions and cutting forces, or bespoke to project, these machines feature a sturdy steel structure, top quality components and are constructed according to the strictest EU regulations to perform at their best and keep their value in the years with the simplest maintenance., - Sturdy and reliable, these guillotines give excellent performances even on lower tonnage, for paper and plastic film reels., - with increased speed system, our guillotines can double the work done, compared with other models., - One operator is needed to work in full safety conditions: 2-hands operation ...

VERTICAL MIXER, 5.000 lt.capacity, total height approx 4.500 mm including transmission group, max Ø 1.800 mm., constructed in painted electro-welded carbon steel., inner auger diam.350 mm. lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door on bottom of cone for complete discharging, with safety opening, side discharging pipe to big bag with valve at 2.500 mm from ground, max electric level indicator, paddle type, automatic greasing kit, 7,5 kw drive, complete with control panel., electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance and instruction manual, installed power : 7.5

sheet width: 605 mm plate thickness: 1.50 mm distance between columns: 605 mm back stop - adjustable: 300 mm table width: 605 mm operating pressure: max 6.0 bar work height max.: 1025 mm work table:: 605 x 250 weight of the machine ca.: 268 kg dimensions of the machine ca.: 1200 x 950 x 1300 mm Furnishing: - pneumatically driven sheet metal shears - manual backgauge - Pneumatic pressure gauge - 2x side table stops including mm scale - 1x movable table stop - Piece counter - mechanical sheet metal hold-down device - Machine light - freely movable foot switch Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9325334 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

VARIOUS SIZES AVAILABLE, Example : for a 250 mm. screen Ø:, Single plate with 2 sliding breakers with radial holes 6,5 mm.diam. Screen diam.250 mm. Construction in steel on n.1 supporting wheeled cart Heating through 4 plate heaters W 3.750 V.240 each one Total power 23 Kw Hydraulic l power station 7,5 kw with control electrovalves, n.2 storage units Pump group externally positioned PTFE ring N.2 temperature controls on drawers N.2 temperature controls on bodies Max work temperature 260 °C Complete with all safety devices Control panel on hydraulic pack Pressure transducer User’s manuals, drawings CE, TYPE: Semi-automatic, non-stop

saw band length: 3660 x 27 x 0,9 mm cutting width: 0,9 mm capacity 90 degrees: square: 270 x 270 mm capacity 90 degrees: flat: 210 x 330 mm total power requirement: 1,5 kW / 300 Nm weight of the machine ca.: 1200 kg dimensions of the machine ca.: 1400 x 1900 x 1900 mm The GERD WOLFF KMS 280 V is a precision band saw with servo drive that has been specially developed for consistently precise cutting of round material from 10- 135 mm diameter. Capacity for round material (mm) diameter 10 mm 276 pieces are possible diameter 20 mm 78 pieces are possible diameter 30 mm 36 pieces are possible diameter 40mm 21 pieces are possible diameter 50mm 15 pieces are possible diameter 60mm 6 pieces are possible diameter 70mm 3 pieces are possible diameter 80 mm 3 pieces are possible diameter 90 mm to 135 mm 1 piece is possible Feed length in one piece: 780 mm The data for this ad was created with Modu ...

Made in sturdy painted carbon steel or AISI 304 stainless steel, drained or covered,.. Customized to your project, just send us your sketch with length, inner and outer diameter, drive, configuration or share your project with us and we will offer you the best solution.

OPTICAL SORTING UNIT, To sort different colors of PET HDPE PP PVC PC ABS PMMA and more, Customizable from 1 to 6 channels, High precision and smart technology which uses A.I.to grant excellent performances., The best cost-effective deal you can find to improve your final product or create a new business., Very quick assistance if needed, Compact and versatile machine, available from 0,940 .up to 2,7 mt. wide (L x H: 1,8 x 1,8 mt.), For a variety of different uses, this machine can separate parts as small as a salt grain and as large as a walnut so increasing the value of your reground plastic scraps ., The control panel with its touch screen allows full customisation on different materials and colors., The 16 million colors high resolution digital cameras gives extremely high performances and can recognize down to 0,09 mm.large defects., The NIR cameras allow to detect stone, glass, soil ...

Hopper opening 400x500mm Control panel Connection 1x230V / 50Hz 10 Amps. 1 phase (or two phases if no neutral) or 1×220-240V / 60Hz 10 Amps. 1 phase or 115V / 60Hz Capacity with fish boxes made of 25 kg/m3: 15-20 kg/h Capacity measured in fish boxes with lids (650 grams per piece: 23-30 boxes/h Dry boxes (for wet boxes a 3 phase machine is better) Non-corrosive Mobile on wheels Density 175-225 kg/m³ 1,5kW 1-phase 230/110 V 50-60 Hz LxHxW 1950x1600x630 mm, Possible additions : exit tray, tub for exit tray, Stainless Steel version, See the chart below for other sizes, installed power : 1.5

This ECS is used to separate the non-ferrous metal fraction from other scraps in plastic recycling lines.., It can handle very small parts but even larger ones, up to 400 mm, depending on the model., Metals which will be separated are : copper - alluminium - brass - bronze, Constructed in a workmanlike manner, durable and efficient machines made in Italy, these devices offer excellent performances in any plastic processing line., To get a customized offer, please send us :, - material processed and size, - contamination % and type, - max contaminants size, - throughput rate of the line

Description: Funnel opening 440 x 440 mm Approx. Onsite Dimension. (l x w x h): 800 x 700 x 2,400 mm, weight approx.: 70 kg

QUICK WASHER for RIGID and SOFT PLASTICS, made in AISI304 stainless steel, low water consumption, can be used with hot water or mild detergents, for reground LDPE LLDPE HDPE film, rigid PE PP PVC PET PA ABS PS PC, 7,5 kw motor 400V 50/60Hz, inner auger 400 mm diam., length 3.000 mm., material and water are loaded from the bottom, material discharging is done through a draining auger from top, bearings are positioned outside the wet chamber, seals on the lower bearing to exclude any contact with water, auger speed (and throughput rate) can be adjustable to change throughput rate 500 to 1.000 kg/h, by adding an inverter, Low water consumption (depending on contamination), The water can be mechanically filtered with a [water screening system](https://www.germanplast.eu/listings/5003567-germanplast-vibrat ing-screen-round-type) (available separately), This machine is to be electrically conne ...

plate thickness: 6 - 40 mm feed: 2,2 m/min total power requirement: 1,5 / 2,1 kW weight of the machine ca.: 65 Kg dimensions: 1,2 x 0,8 x 1,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer GER Model CM 2500 CNC Year 2000 CNC FAGOR 8055 Characteristics Distance between centre 2.500 mm. Centre height 300 mm Max grinding diameter 595 mm. Max weight between centers 2.000 kg. Max weight grinding on air 350 kg. Longitudinal movement Max programable speed 6.000 mm/min. Min programable increase 0.001 mm Cross movement Max.programable speed 6.000 mm/min Min programable increase 0.001 mm. Various Max. grinding wheel size Ø 500/80 mm. Grinding wheel Cutting Speed 45 m/s Parts Holder Centre Cone C.M.6 Centre Cone Tailstock C.M.6 2 Steady Rests INCLUDED Machine weight 12.000 kg.

Bottle washing machine GERA type: Arcade year of manufacturing: 2010 working hours: 32767 capacity: approx. 33.000 bph by 1,0 ltr. bottles control range: 13.200 - 36.300 bph cell pitch: 110 mm bottle cells per row: 30 bottle cells complete: 7.860 with pre-soaking The machine is still in production in Germany and will be available in February 2025

Chassis number: 669012 Weight: 1,7 tons Power: 15Kw Air pressure: 6,0 Bar Length mm: 6000 Width mm: 1200 Height mm: 2600 Transport size L x W x H: 2,9 x 2,5 x 1,4 Number of spindles: 8 spindles Condition machine : Working disassembled Control type: Manual Electric. Connection: 32A 400V Documentation: No Instructions: No Electric diagram: No Parts list: On request Photos/film available: Photos and video available

VERTICAL MIXER, 8 m3 capacity, total height approx 4.500 mm including transmission group, max Ø 2.200 mm., constructed in painted electro-welded carbon steel., inner auger diam.350 mm. lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door on bottom of cone for complete discharging, with safety opening, side discharging pipe to big bag with valve at 2.500 mm from ground, max electric level indicator, paddle type, automatic greasing kit, 11 kw drive, complete with control panel., electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance and instruction manual, installed power : 11

SINGLE SHAFT SHREDDER, 1.000 mm wide rotor, 370 mm diameter, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti - vibration foundation, Machine prepared for discharge by c ...

SINGLE SHAFT SHREDDER, V-rotor width 600 mm. diameter 260 mm, Rotor speed 80 - 125 rpm, Throughput rate 100-150 kg/h depending on material and screen, Drive power 22 kW, Max. number of knives 28 pcs 40 mm., screen size bespoke to project :15 to 40 mm, Hopper 600 x 800 mm, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmiss ...

SINGLE SHAFT SHREDDER, V Rotor width 1.500 mm. Rotor diameter 500 mm 16.69″ Motor power 90 kW n.82 knives 60 x 60, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti - v ...

4-SHAFT SHREDDER 22 KW, sturdy carbon steel electrowelded structure, anti-wear side walls, loading hopper, shredding surface 600 x 800 mm., n.4 x 800 mm long shafts, n.30 anti-wear cutting knives 20 mm thick, n.30 routing disks, n.2 planetary gearboxes, n.2 x 11 kw motors, inversion on overload, n.18 rpm average, bespoke screen size, extraction prepared for connection with blowing system, SIEMENS LOGO PLC with simple panel for complete control, CE compliance, Users manuals.

4-SHAFT SHREDDER 15 KW, sturdy carbon steel electrowelded structure, anti-wear side walls, loading hopper, shredding surface 600 x 800 mm., n.4 x 800 mm long shafts, n.30 anti-wear cutting knives 20 mm thick, n.30 routing disks, n.2 planetary gearboxes, n.2 x 7,5 kw motors, inversion on overload, n.18 rpm average, bespoke screen size, extraction prepared for connection with blowing system, SIEMENS LOGO PLC with simple panel for complete control, CE compliance, Users manuals.

TWIN-SHAFT HYDRAULIC SHREDDER, Hopper size: 2.5 x 1.8 x 1.2 m (or customised), construction in robust high thickness carbon steel, shredding surface 1.500 x 1.100 mm, 2 counter-rotating steel hexagonal shafts with differentiated speed 16-21 rpm, no. 30 blades, 50 mm, 2 teeth, very easy blade maintenance, welded profile connection frame 1.3 x 1.0 x 1.5 m approx., No. 2 gearboxes, No. 2 electric motors 37,5 kW ( 100 Hp) total power - 400 V/50 Hz, bearings strategically positioned so as not to be affected by the processed material, the bearings are connected to a centralised lubrication point that can be connected (as an option) either to an automatic lubrication system or to a manual greasing point where the operator can intervene regularly., hydraulic control unit,, electrical control panel with PLC and machine wiring, automatic overload reversal with programmable number of reverse cycles ...

SINGLE SHAFT SHREDDER, V Rotor width 2.000 mm. 78,74 Rotor diameter 500 mm 16.69″ Motor power 90 kW n.112 knifes 60 x 60, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on  ...

Key data: 1000 mm, 500 mm

GER (License ELB) Surface Grinding Machine Type RS 1000 Condition: very good Table longitudinal travel: 1000 mm Table cross-travel: 500 mm Vertical travel: 500 mm Grinding wheel dimension: 300 x 50 x 76 mm bore Spindle power: 7.5 kW Dimensions: approx: 3,000 x 2050 x 2,400 mm Weight: approx. 4000 kg Accessories: Electro-magnetic panne plate; coolant device; Legs The machine is suitable for repair operation; Repair, toolmaking and is very easy to use. Price net plus VAT plus loading costs

Germark labelling machine for bottles, model: BA050/01GR, serial number: 9600411, 220 V, 1100 W, label width: 170 mm, total dimensions: 2400 mm x 700 mm x 1670 mm.

General SKU396U1165 LocationBarneveld MakeGerteis Maschinen Processingeneering AG Type1-W-POLYGRAN 250/240 No.1065 Year of construction1997 Main Features MaterialStainless steel Width230 mm Specified Features - Sieve granulator Granulating sievecheck Rotor sizesdia. 240 x 230 mm Sieve sizesdia. 250 x 230 mm Sieve perforation1,5 mm With hoppercheck 50 ltr. InletDia. 315mm Motor400 volt (servo motor) With variable speed drivecheck Speed20-180 rpm MaterialStainless steel 1.4301 (304), Stainless steel 1.4435 (316L) Information Mounted on wheelscheck rail system With switchgearcheck Weight520 kg CEcheck Floor space1,30 x 0,85 m Total height1,60 m Extra SpecificationsSpeed left and right 20-180 rpm, typical 75 rpm, rotation angle left and right 0/720 degrees, typical 270 degrees. Sieve granulatorsGerteisSieves > Sieve granulatorsBrand > Gerteis What you can expect  ...

Gernal rotating cooking chamber, type: KBG-SE-LPF-2A, number: 02/00475, year of construction: 2002, 415 V, 50 Hz, year of construction: 2002, 108 kW, 191.4 A, inside dimensions: 1000 mm x 1050 mm x 2000 mm, s/s rack, 15 floors, dimensions floors: (15x) 640 mm x 535 mm, total dimensions: 1350 mm x 1650 mm x 3050 mm.

AERAULIC SEPARATION SYSTEM, for labels, dust, light weight contamination on flakes, granules and regrinds, max 1.800 kg/h, constructed in painted steel + galvanized steel elements, Complete system with 4 kw vent, Ø160 pipes, bends, clamps, Cyclone, hoppers, filter sleeve, complete with big bag supporting structure, Possible addition of weighing system, For lower production plants see our ref GE460, You are welcome to send a product sample to evaluate the best solution., installed power : 4.0

The system can be used for granulate, reground, agglomerate or powder, Including: hopper, injector, blower and piping length bespoke to your project., blower of suitable power, Cyclone with filtering system and a diverting valve Constructed in sturdy painted steel or galvanized steel The supporting structure can hold 1 or 2 big bags, Possible addition of weighing system for each big bag

SINK-FLOAT SEPARATION TANK for PLASTIC SCRAPS, Constructed in thick AISI 304 STAINLESS STEEL with reinforced plates and profiles, Dimensions mt.13,2 x 2,96, Inlet hopper for shredded plastics, Flanged water in/out ports, taps and ball valves, n.6 x 1,5 kw.driven rollers for material movement with Bonfiglioli gearboxes, n.2 chain conveyors on bottom to extract the sunk materials, n.1 diagonal stainless steel chain conveyor, collection drained auger for extraction of floating material, size: 13 x 3 mt., CAPACITY: 1.800-3.500 kg/h depending on materials

AERAULIC SEPARATION SYSTEM, for labels, dust, light weight contamination on flakes, granules and regrinds, For a capacity max 1.800 kg/h depending on material, constructed in painted steel + galvanized steel elements Complete system with Ø 160 mm.pipes, curves, clamps, cyclone, hoppers, sleeve Central body, lower and upper hoppers,, bolted hatch for cleaning purposes 0.37 Kw 4-pole motor Reducer, regulation valve, Complete with 0.75 Kw vent. Complete with big bag supporting structure., Possible addition of weighing system, For higher capacity, see ref. [GE461](https://www.germanplast.eu/listings/4115718-label-separating-s ystems), You are welcome to send a product sample to evaluate the best solution., installed power : 1.06

SINK-FLOAT SEPARATION TANK for PLASTIC SCRAPS, Constructed in thick AISI 304 STAINLESS STEEL with reinforced plates and profiles, Dimensions 5,0 X 2,4 mt., Inlet hopper for shredded plastics, Flanged water in/out ports, taps and ball valves, n.2 x 1,5 kw.driven rollers for material movement with Bonfiglioli gearboxes, n.1 chain conveyor on bottom to extract the sunk materials, n.1 diagonal stainless steel chain conveyor, collection drained auger for extraction of floating material, size: 5,0 x 2,4 mt., CAPACITY: 800-1.500 kg/h depending on materials

SINGLE SHAFT SHREDDERS SPECIAL FOR PLASTIC SCRAPS, form 600 mm to 2.000 mm wide rotor., Adjustable counter-knives, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti-vibration, Machine prepared for discharge by conveyor belt, Bolted and hardened rotor shaft on gear box side (ant ...

TWIN-SHAFT HYDRAULIC SHREDDER, Customised hopper, construction in robust high thickness carbon steel, shredding surface 1.000 x 580 mm, 2 counter-rotating steel shafts with differentiated speed, Blades 15 mm, 4 teeth or bespoke, Very easy blade maintenance, welded profile connection frame, No. 2 gearboxes, Electric motors 11 kW (15Hp) - 400 V/50 Hz, bearings strategically positioned so as not to be affected by the processed material, the bearings are connected to a centralised lubrication point that can be connected (as an option) either to an automatic lubrication system or to a manual greasing point where the operator can intervene regularly., hydraulic control unit,, electrical control panel with PLC and machine wiring, automatic overload reversal with programmable number of reverse cycles, width: 1.000 mm, Power: 11 kw

TWIN-SHAFT HYDRAULIC SHREDDER, Customised hopper, construction in robust high thickness carbon steel, shredding surface 1.000 x 700 mm, 2 counter-rotating steel shafts with differentiated speed, Blades 30 mm, 4 teeth or bespoke, Very easy blade maintenance, welded profile connection frame, No. 2 gearboxes, Electric motors 2x11 kW (30Hp) - 400 V/50 Hz, bearings strategically positioned so as not to be affected by the processed material, the bearings are connected to a centralised lubrication point that can be connected (as an option) either to an automatic lubrication system or to a manual greasing point where the operator can intervene regularly., hydraulic control unit,, electrical control panel with PLC and machine wiring, automatic overload reversal with programmable number of reverse cycles, width: 1.000 mm, Power: 22 kw

TWIN-SHAFT HYDRAULIC SHREDDER, Customised hopper, construction in robust high thickness carbon steel, shredding surface 1.300 x 700 mm, 2 counter-rotating steel shafts with differentiated speed, Blades 30 mm, 4 teeth or bespoke, Very easy blade maintenance, welded profile connection frame, No. 2 gearboxes, Electric motors 2x11 kW (30Hp) - 400 V/50 Hz, bearings strategically positioned so as not to be affected by the processed material, the bearings are connected to a centralised lubrication point that can be connected (as an option) either to an automatic lubrication system or to a manual greasing point where the operator can intervene regularly., hydraulic control unit,, electrical control panel with PLC and machine wiring, automatic overload reversal with programmable number of reverse cycles, width: 1.300 mm, Power: 22 kw