ger sca used for sale

Valve block, control block, hydraulic control block, control unit, control valve -Manufacturer: GSL (German Standard Lift), control block for the drive of work platforms -Model code: Valves 4070... see photos -Dimensions: 340/300/H400 mm -Weight: 40 kg

Control unit, control element, interface, drive control, drive current control, high-performance pulse control, pulse control -Manufacturer: GSL (German Standard Lift), high-performance impulse control for driving work platforms -Type: 1204-406 -Voltage: 36-48 V -Dimensions: 195/145/H75 mm -Weight: 2 kg

Valve block, control block, hydraulic control block, control unit, control valve -Manufacturer: GSL (German Standard Lift), control block for the drive of work platforms -Model Code: Valves 4070... see photos -Dimensions: 340/300/H160 mm -Weight: 38 kg

Hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Manufacturer: GSL (German Standard Lift), hydraulic reservoir for the drive of work platforms -Additional parts: see photos -Dimensions: 300/295/H550 mm -Weight: 11.4 kg

Capacity: 2800 Watt volume: 100 L filter: HEPA : 230 mbar material: INOX Edelstahl Behälter : 5000 mm hose diam.: 32 mm : 5000 mm noise: 82 dB dimensions: LxBxH 50 x 50 x 135 cm weight: 35 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for driving work platforms from GSL (German Standard Lift) -Drive shaft: Ø 22 mm toothed -universally applicable -Number: 3x motors available -Price: per piece -Dimensions: 235/125 mm -Weight: 15 kg/piece

Tool holder, milling holder, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves -Milling holders: MK4 holder -Type: Ø27 x 60 mm Z 03 1-02 -Dimensions: 245/43/43 mm -Weight: 1.3 kg

Available in stock 1 x Used Injector Nozzle Test Stand. Use the injector nozzle test stand to verify the shape and atomization of the injected test fluid and to leak test the needle seating. The equipment is used but in good working conditions.

Tool holder, milling tool holder -Number: 21x SK50 recording -Receptacles: Ø 22-50 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills -Sale: only complete set -Weight: 88 kg

Labeler prepared for 3x adhesive labels with hot melt (front/back/safety tab). The labeller was overhauled in 2021 by the manufacturer Gernep, including new electrics according to CE standard. The labeller is equipped for the glass type DTO80. The labeller was in operation for about 200 hours after the overhaul.

end mill, end mill, milling cutter -Finishing cutter -Various: Diameter -Various: Manufacturers -Price/Sale: complete -Quantity: 7 pieces -Weight: 9 kg

One Way Filling line for Beer Capacity: 4000 bph Installed for 0,33 liter Stubby Bottle, 0,33 liter Steinie Bottle Holdefleiss 24 head counter pressure filler with 6 head crowner model early 70. Fimer Rinser 16 head 3-4000 bph. Year? (From kahl Schlichterle 2016) Gernep Labetta labeler 6-480 SK 3-4000 bph. Year 1996? Depall. Dansk Maskinmontasje 2016 Side Grib Conveyor, Carry Line 2016 Bottle conveyors. Dansk Maskinmontage 2016

Gerstel / CTC Mutlti Purpose Sampler MPS complete For the LC as well as GC YOC 2014, tray for 98 vials (2ml), gas-tight injection syringes

Made in sturdy painted carbon steel, Size and angle depending on availability of the moment

Servo Driven Labeller Mfc.: Gernep Built: 2017 Overhauled in 2020 2 cold glue stations for back and front + neck label 1 format for Steinie 3 formats long neck and Appo 33 cl back - front - neck (1 format)

Volume : 1200 ltr. Material : areas in contact with the product in stainless steel; --> mixer mounted on base frame.

Carbolite Gero AX30 Heating Oven Original price 3185 € Heating cabinets of the Apex AX series are economy laboratory devices for temperatures up to 250°C. The tabletop units are equipped with R38 PID controllers as standard. Digital PID Controller R38 Recirculating air fan for short heat-up times and excellent temperature homogeneity Stainless steel inner chamber Two height-adjustable, chrome-plated lattice shelves Door with locking function and airtight silicone gasket Complies with safety standard BS EN 61010-2-010:2003 Maximum temperature 250°C Minimum temperature RT + 30°C Volume (litres) 28 Temperature homogeneity (°C) ±5.0 250°C Heat-up time (min) 23 Recovery Time (min) 3 Dimensions: Inside H x W x D (mm) 295 x 300 x 320 External dimensions H x W x D (mm) 440 x 590 x 465 Load per grid/total 10/20(kg) Air change per h 65 Max. power (W) 1000 Holding power ...

Carbolite Gero AX30 Heating Oven Original price 3385 € Heating cabinets of the Apex AX series are economy laboratory devices for temperatures up to 250°C. Digital PID Controller R38 Recirculating air fan for short heat-up times and excellent temperature homogeneity Stainless steel inner chamber Two height-adjustable, chrome-plated lattice shelves Door with locking function and airtight silicone gasket Complies with safety standard BS EN 61010-2-010:2003 Maximum temperature 250°C Minimum temperature RT + 30°C Volume (litres) 28 Temperature homogeneity (°C) ±5.0 250°C Heat-up time (min) 23 Recovery Time (min) 3 Dimensions: Inside H x W x D (mm) 295 x 300 x 320 External dimensions H x W x D (mm) 440 x 590 x 465 Load per grid/total 10/20(kg) Air change per h 65 Max. power (W) 918 Holding power (W) 342 Weight (kg) 24 Condition: new, without original packaging  ...

Bottle washing machine GERA type: Arcade year of manufacturing: 2010 working hours: 32767 capacity: approx. 33.000 bph by 1,0 ltr. bottles control range: 13.200 - 36.300 bph cell pitch: 110 mm bottle cells per row: 30 bottle cells complete: 7.860 with pre-soaking The machine is still in production in Germany and will be available in February 2025

Height 2100 mm Width 1800 mm Length 3900 mm Capacity 3000 l Total power 6 kW Main Material Stainless steel, acid-resistant Cooling jacket tumbler Yes, refrigeration unit built into machine design

Labeling Machine Make: Gernep Type: SK 5000 Capacity: 5000 bph

Micro Feeder Gericke GLD 86 Agitator 0.03 kw - 16.5rpm, auger 0.08kw -210rpm, Control

High-temperature chamber furnace with an operating temperature of up to 2,000 °C, including water cooling and sequence control with automatic valves. Usable space: 600 mm x 600 mm x 600 mm (= 220 l.), el. Power: 117 kW,

Tool holder, milling holder, milling tool, long milling arbor, attachment holder, cutter head holder, cutter head holder -Milling chuck: SK40 chuck, 3 pieces -Type: 40x16x63 TGL 30 1359 -Hole: Ø 16 mm -Dimensions: 203/60/55 mm -Weight: 1.2 kg

Sell 6 Masterpact in very good working order, sold without locker. Make bid for the lot

MAGNETIC SEPARATORS, in form of overbelt plates,, grids, channels, stars, etc.

Including: Injector Hopper Pipe connection Bends Clamps Cyclone Customized to your project

We are selling a large-capacity 3D printer X1000 from German RepRap GmbH. The device is in good condition and has been serviced by Innovatiq., Scope of delivery:, - 1 pc. 3D printer X1000, - Small parts and remaining consumables, Installation space in mm (x/y/z): 1000 x 800 x 600 mm, build speed: 10 – 150 mm/s, Travel speed: 10 – 300mm/s, Layer thickness: 0.02mm, Filament diameter: 1,75 mm, Nozzle diameter: 0.4mm / 0.6mm / 0.8mm, extruder units: DD3 Dual, Extruder temperature: max.290°C, Print bed technology: Heatable up to 120°C, Data transfer/network: LC touch display, wireless printing via WLAN, Ethernet, software: Simplify3D Software, Power consumption: (max.) 2.5kW, approx. 30% in continuous operation, Power connection: Three-phase current 400V (CEE 3L+N+PE), 16 A, Dimensions in mm (w x h x d): 1725 x 1500 x 1320 mm, Weight in kg: 400 kg

4-SHAFT SHREDDER 22 KW, sturdy carbon steel electrowelded structure, anti-wear side walls, loading hopper, shredding surface 600 x 800 mm., n.4 x 800 mm long shafts, n.30 anti-wear cutting knives 20 mm thick, n.30 routing disks, n.2 planetary gearboxes, n.2 x 11 kw motors, inversion on overload, n.18 rpm average, bespoke screen size, extraction prepared for connection with blowing system, SIEMENS LOGO PLC with simple panel for complete control, CE compliance, Users manuals.

4-SHAFT SHREDDER 15 KW, sturdy carbon steel electrowelded structure, anti-wear side walls, loading hopper, shredding surface 600 x 800 mm., n.4 x 800 mm long shafts, n.30 anti-wear cutting knives 20 mm thick, n.30 routing disks, n.2 planetary gearboxes, n.2 x 7,5 kw motors, inversion on overload, n.18 rpm average, bespoke screen size, extraction prepared for connection with blowing system, SIEMENS LOGO PLC with simple panel for complete control, CE compliance, Users manuals.

VERTICAL MIXER 20 m3 capacity, total height approx 7.000 mm including transmission group (can be customized), max Ø 2.400 mm.(standard transport), constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, side discharging pipe to big bag with valve mm.at 2.500 mm from ground, max electric level indicator, paddle type, automatic lubricating kit, electric motor 15 kw, complete with control panel., electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance, drawings and instructions manual in English., Possible additions: wheeled slide, feeding screw and hopper, extraction auger, b ...

Wet Glue Labeling Machine Gernep Labetta Built in 1999 Round Runner Type 3/2/6 BR Chest, neck - back label Bottle Type 0.33 + 0.50 + 0.70 + 1.00L Glass Bottle 5,000 bph Running direction left - right Clockwise

SEMI-AUTOMATIC, NON-STOP SCREENCHANGER, Screen Ø 30 to 400 mm. Can fit any type of extruders with single or twin screws Made in sturdy steel on supporting wheeled cart for easy transport Smart construction out of our long experience in plastic extrusion Complete with control panel for temperature and pressure management Hydraulic power pack Connection flanges available on given design of pelletizer and extruder Single drawer with 2 sliding breakers (available also double/4 breakers), when asking for a quotation, please detail:, - Type of extruder, - screw (s) diameter, - production rate in kg/h, - material tyupe, - material MFI, - contamination and average %, - filtration required in mesh or my, type: Semi-automatic, non-stop

WHEELED SCREW CONVEYOR to charge TANKER TRUCKS, for plastic granules, capacity ca.60 m3/h, Constructed in carbon steel with antirust painting, Outer Ø 300 mm, Bearing casing with dust seals, loading hopper 1.000 x 1.000 mm., 7,5 kw gearmotor, wheeled supporting structure, Total screw length 7,0 mt., Discharging height 4,5 mt., flexible pipe with capacity sensor on discharge, complete with control panel, CE compliance, Users manual, Electrical drawings., ALSO AVAILABLE IN STAINLESS STEEL VERSION, See other similar items with different features [GE751](.germanplast/listings/7506589-wheeled-tanker-loading-screw-con veyor-basic)[-GE753](.germanplast/listings/7553224-wheeled-tanker-load er-adj-height-with-automatic-retractable-sleeve)[-GE750](.germanplast/ listings/6874982-tanker-loading-system-60-m3-h-automatic-retractable-s leeve), installed power - used power in work: about 60-65% : 7,5,  ...

WHEELED TANKER TRUCKS LOADING SYSTEM, for plastic granules, Loading speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1.000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper, Discharge height 4,5 m.from floor, Screw length 8.300 mm, The screw can be lowered for storage, The bearings are dust-tight ...

WHEELED SCREW CONVEYOR to charge TANKER TRUCKS, capacity ca.60 m3//h, Constructed in carbon steel with antirust painting, Outer Ø 300 mm, Bearing casing with dust seals, loading hopper 1.000 x 1.000 mm., 7,5 kw gearmotor, wheeled supporting structure, adjustable height by manual hydraulic pump, Total screw length 7,0 mt., Discharging height 4,5 mt., flexible discharging pipe with Capacity sensor, complete with control panel, CE compliance, Users manual, Electrical drawings., ALSO AVAILABLE IN STAINLESS STEEL VERSION, See also other versions with different features [GE752-](.germanplast/listings/7553190-wheeled-tanker-loader-7-mt-long -4-5-mt-discharging-point-or-bespoke)[GE753](.germanplast/listings/755 3224-wheeled-tanker-loader-adj-height-with-automatic-retractable-sleev e)-[GE750](.germanplast/listings/6874982-tanker-loading-system-60-m3-h -automatic-retractable-sleeve), capacity: 60 ...

AIR DRYING TUNNEL, for strands, dimensions 2.000 x 300 mm. (or bespoke), blower on bottom with 2 conveyors which send air through slits, constructed in AISI304 stainless steel

SINK-FLOAT SEPARATION TANK for PLASTIC SCRAPS, Constructed in thick AISI 304 STAINLESS STEEL with reinforced plates and profiles, Dimensions 5,0 X 1,5 mt., Inlet hopper for shredded plastics, Flanged water in/out ports, taps and ball valves, 1,5 kw.driven rollers for material movement with Bonfiglioli gearboxes, n.1 chain conveyor on bottom to extract the sunk materials, n.1 diagonal stainless steel chain conveyor, collection drained auger for extraction of floating material, size: 5,0 x 1,5 mt., capacity: 800-1.500 kg/h depending on materials

TANKER TRUCK LOADING SYSTEM, for plastic granules, Maximum speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1,000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper at a rate of 60 m3 per hour, the 300 mm.Ø screw can be lifted and lowered to easily move inside and outside., Maximum discharge heig ...

VIBRATING SCREEN - best solution for liquids and powders, Dynamic three-dimensional vibrations., The vibratory motion of the screen spans both horizontal and vertical directions, providing the flexibility of adjustment in both axes., Minimal installation requirements., No vibration transmission from the upper section to the base, Possible addition of wheels to the base., Quick disassembly for cleaning or mesh replacement., Each screen supports the installation of 1 to 4 separation stages, yielding 2 to 5 distinct product fractions., Constructed in carbon steel or stainless steel., All parts in contact with material are on AISI 304 stainless steel Fully compliant with CE regulations most required screen diameter from 400 mm up to 2.200 mm to cover all needs, self cleaning system,, Just ask for your own vibrating screen by listing the following specs:, - material, - process, - size of good ...

VERTICAL MIXER, 5.000 lt.capacity Total height approx 5.000 mm Max diam. 1,850 mm. Constructed in painted electro- welded carbon steel. Inner auger diam.280 mm. Loading hopper with safety grid and sampling shutter, 600 x 500 mm. Pulley and belt transmission, protected by carters Inspection door with safety limits, Cleaning hinged door on bottom of cone for complete discharging, with safety opening Side discharging pipe to big bag with valve at 1.000 mm from ground Bottom discharging pipe propeller type max level indicator automatic greasing kit 7,5 kw electric motor Complete with control panel. Electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V CE compliance and instruction manual, installed power - used power in work: about 60-65% : 7.5, capacity: 5.000 lt.

3,0 m3 capacity Total height approx 4.000 mm Max diam. 1.600 mm. Constructed in painted electro- welded carbon steel. Inner auger diam.280 mm. Loading hopper with safety grid and sampling shutter, 900 x 740 h 830 Pulley and belt transmission, protected by carters Inspection door with safety limits, Cleaning hinged door on bottom of cone for complete discharging, with safety opening Side discharging pipe to big bag with valve at 1.000 mm from ground Bottom discharging pipe propeller type max level indicator automatic greasing kit 5,5 kw electric motor Complete with control panel. Electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V CE compliance and instruction manual, installed power - used power in work: about 60-65% : 5.5, capacity: 3.000 lt.

VERTICAL MIXER 14.000 lt., Total height approx 5.500 mm, Loading from top with cyclone and dust sleeves collector, Max diam.2.380 mm., Constructed in painted electro-welded carbon steel., Inner auger diam.350 mm., Sampling hopper with safety grid and shutter, mm.600×500, Pulley and belt transmission, protected by carters, Inspection doors with safety limits, Cleaning hinged door with on bottom of cone for complete discharging,, with safety opening, Side discharging pipe to big bag with valve, paddle type max level indicator, automatic greasing kit, 11 kw electric motor, Complete with control panel., Electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance and instruction manual, installed power - used power in work: about 60-65% : 11