ger grinder used for sale

2-SHAFT SHREDDER 1.250 mm.90 kW, for waste of plastics, WEEE, light metals, cables, tyres, bulky waste and more, This is a versatile 2-shaft shredder, a new machine engineered to offer the best possible results in size reduction of various materials., Constructed entirely in Italy, according to the latest safety regulations with top quality materials and components., Reliable, evergreen, economic when compared to other EU brands of same quality, this machine comes from our long experience in size reduction of differente waste materials., Post-sale assistance is available with us and our 24/7 on whatsapp.., n.2 x 1.250 mm long shafts, 13-15 tpm Shredding chamber :1.250 x 900 mm, Electric motors 2 x 45kw (or bespoke to project), planetary gearboxes, grease lubrication, inverter for reverse movement on pre-settable threshold, n.12 knives in sturdy steel, 100 mm.thick, 2 hooks (for plastics, ...

Made in sturdy painted carbon steel or AISI 304 stainless steel, drained or covered,.. Customized to your project, just send us your sketch with length, inner and outer diameter, drive, configuration or share your project with us and we will offer you the best solution.

CONVEYOR BELTS SYSTEM to load scraps onto shredder or granulator, 1st conveyor, made to open the bale and manually separate materials, width 1.200 mm., length 5.000 mm. horizontally set, plain belt which can be either in PVC or RUBBER,, supporting structure made in sturdy carbon steel with short walls, Adjustable speed (average 15 m/min, 2nd coveyor, meant to lift pre-selected material onto the machine, width 1.200 mm, length 5.500 mm 30°inclination, Belt can be either in PVC or RUBBER, fishbone orwith draggers, supporting structure made in sturdy carbon steel, side walls 500-700 mm high, Adjustable speed (average 60 m/min, These machines are prepared to be connected to an existing electric panel to be synchronized with the main machine, availability: 3-5 months from drawing confirmation, working width: 1200 mm., options available: different angle, size, bekt material,..

Used Used labeller Gernep Labetta 5-640 sk: Year: 2009 Condition: As Is Used labeller GERNEP Year: 2009 Modello: LABETTA 5-640 SK Speed: 4000 Bph Direction: Clockwise 5 Heads Nr. 2 Stazioni Adesiva per: Front label (Also suitable for wraparound label) Stamp on cap Electronic cams Regolazione testata: elettronicamente Workable formats: minimum diameter 40 mm maximum 100 mm minimum height 40 mm maximum 300mm Safety protections Code: EA 504 More details: https://bottlingscout.com

A washing machine for cleaning glass bottles prior to beverage filling. The soiled empty bottles are loaded into bottle baskets and pass through the system for approximately 14 minutes. First, the bottles pass through a pre-soaking bath and a lye bath in the lower section, and are then rinsed in the upper section with lye, twice with hot water, cold water and finally fresh water. The cleaned bottles are discharged onto the bottle conveyor above the bottle inlet., Additional title: single-ended machine for cleaning glass bottles, Nominal capacity: 33000 Fl/h ; mechanical control range: 13.200 - 36.000 Fl/h, Number of basket holders: 269 pcs. ; of which 259 were filled – total number of bottles: 7.770 pcs., Processing time: 14,14 min, Heating / Cooling: 1.352.712 kJ/h, Water: 7,92 m³/h, Formats: 0,5 l NRW bottles, Material: housing from stainless steel, Position: in a cabinet on legs wi ...

General SKU291Y535 LocationBarneveld CEcheck MakeGerstenberg Schröder Motor Motor power37 kiloWatt Pressure Working pressure50 Bar Vacuum possiblecheck Main Features MaterialStainless steel Motor37 KW Inlet diameter65 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesø 280 x 170 mm Teethed rotorcheck InletDN65 OutletDN80 Motor37 kW, (380 V, 1470 rpm) MaterialStainless steel 1.4571 (316Ti) General TypeRL 280/170 No.4299-2-197917 Year of construction2006 Floorspace2,00 x 0,70 m Total height0,85 m Weight850 kg Extra SpecificationsVolume 6 l., cap. 5000-10000 kg/h for oil 80%,rotormachine (pin rotor machine) for crystallisation for margarine, boter and fatty products,&:nbsp:Oils & fatOintmentsStarchColloid millsCosmeticsFood additivesSugarConfectioneryBeveragesBiopharmaceuticalAPINew arrivalsGerstenberg SchröderIndustries > Food & Feed > Oils  ...

machine measurements: 3.000 mm machine weight: -- kg power capacity: 90 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offered for sale is a self-adhesive labeling machine. Nominal output: 11000bottles/h, reference circle diameter: 720mm, control range: 2000 to 12000bottles/h, number of container plates: 12, pitch: 188.4mm, starwheel diameter: 480mm, starwheel pitch: 8, number of self-adhesive labeling stations: 2, direction of operation: left-hand machine, control: touch panel. Equipped with infeed screw 1x, infeed/outfeed starwheel 1x, bottle plates 1 set, centering hoods 1 set, swivel arm, free-standing control cabinet. Inspection possible by appointment.

dimensions of the machine ca.: 6,2 x 3,4 x 2,6 m weight of the machine ca.: 9,6 t power requirement: 22 kW Control: FAGOR 8055i table-size: 1800x500 mm long. travel of table: 1660 mm table weight: 1700 Kg cross travel: 600 mm number of spindle speeds: 1500 U/min/rpm spindle drive: 12 kW -Usable grinding area 1,500 x 680 mm -Max. distance table – grinding wheel center 625 mm -Infinitely variable table speed 2–28 m/min -Cross-feed speed 0.02 – 5 m/min -Vertical feed speed 0.02 – 2 m/min -Infinitely variable table speed control Included -Max. grinding width (with 80 mm wheel) 680 mm -Smallest programmable CNC increment 0.001 mm -Grinding wheel dimensions Ø 400 x 80 x 127 mm -FAGOR servo motors and drives for 3 axes (X, Y, Z) Included -Electromagnetic chuck (high density) Included -Electromagnetic chuck dimensions 1,500 x 600 mm -Coolant filtration system with paper filt ...

Tamper-evident label removal system, Manufacturer GERMARK, Type MBSTE / Multibox TE, Year 2018, X : Length (mm): Mini 55 mm / Maxi : 200 mm , Z: Width (mm): Mini : 30 mm / Maxi : 140 mm , Y: Height (mm): Mini : 15 mm / Maxi : 140 mm , Dimensions of tamper-evident labels (mm): length : 20 / Height : 22 , Label roll (mm): Inner diameter: 76 mm / Maximum outer diameter: 400 mm

Overview This Gernep Soluta 6-720 2SK SD is a rotary self-adhesive labelling machine built in 2023. It carries two self-adhesive labelling stations on a 720 mm container table with twelve servo-driven bottle plates, and runs at a rated output of 11,000 bottles per hour with an adjustable range of 2,000 to 12,000 bottles per hour. Containers are fed in through a single infeed worm and an eight-division star, held on servo-driven bottle plates while the labels are applied, and discharged through the same star pitch. Height adjustment is electric, the labelling stations and the bottle-plate drive are servo-controlled, and the machine is operated from a touch panel with a free-standing control cabinet. Broken-container detection is fitted, and a VPN router for remote maintenance is installed. Technical data Manufacturer: Gernep Model: Soluta 6-720 2SK SD Year of manufacture: 2023 Machine typ ...

ROTO-CLASSIFIER to obtain a more uniform size on agglomerated materials, with exchangeable screen (8-10-12-14-16 mm….) suggested 10 for PE 12 for PP, constructed in a state-of-the-art manner with safety devices, side doors, basket size about 1500 mm x diam.600 mm.(or bespoke), gearmotor 0,75 kw, new machine, complete with lifting auger which collects material from the discharging hopper of the agglomerator., screw diam. 220 mm 1,5 kw, It can be completed with a pneumatic extraction system to bag filling station or vertical mixer, installed power - used power in work: about 60-65% : 0,75, availability: 5 weeks ca, options available: screen holes - length, conditions: new machine

with bespoke exchangeable screen (8-10-12-14-16 mm….), to obtain a more uniform size on agglomerated materials, new machine, complete with lifting auger which collects, material from the discharging hopper of the agglomerator. constructed in a state-of-the-art manner with safety devices side doors basket size about 1.500 mm x diam.600 mm. (or bespoke) gearmotor 0,75 kw screw diam. 220 mm 1,5 kw It can be completed with a pneumatic extraction system to bag filling station or vertical mixer, price options: new machine, bespoke to projecr

GER tangential grinding machine mod. RS-10/50 FEATURES Table dimensions: 1000×550 mm Table distance to the center of the grinding wheel: 625 mm Table Speed: 2 to 25 Max Ground Weight: 1000 kgs Longitudinal travel X: 1050 mm Cross travel Y: 500 mm Auto Penetration: Yes Wheel dimensions: Ø 400x80x127 mm Wheel holder: 12.5 HP Hydraulic pump power: 5.5 HP Equipped with Electromagnet: 760×500 mm

Air pressure-done piston pump aerial entrance pressure max. 8 cash Max Materialvolumenstrom Materialvolumenstrom materialvolumenstrom 4.5 l / min. translation 30:1 224 cash material temperature max. 90°C high-grade steel execution (changes and mistakes in the technical data, information and prices as well as intersales reserve!)

Te Coop: Merlin Gerin micropac sx 300

Auction-ID: A7-49715-104

Stock number: D513, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Vacuum screw conveyor, Dimensions: Ø 150 x L 2250 mm, Motor: 2,94 kW - 22,5-158 o/min., Manufacturer: Gerivac, Other: Prepared with zone for vacuum

Auction-ID: A1-50232-121

Auction-ID: A1-50232-128

Auction-ID: A1-47390-211

Auction-ID: A1-50232-122

Auction-ID: A1-50232-126

Auction-ID: A1-50232-123

Auction-ID: A1-50232-127

Auction-ID: A1-50232-124

Stock number: A051, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Scraped surface heat exchanger, Manufacturer: Gerstenberg & Agger A/S, Type: Labo Perfektor 1x57 B/L, Other: 4 zones

PN 0.712.001 THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-49883-112

Machine with problems for spare parts. Industrial Gerber automated CNC cutting system with large-format vacuum cutting table, intended for automated cutting of flexible materials and production components. Full functionality and cutting accuracy have been verified. Auction-ID: A7-50083-19

Lot for allocation. Industrial Gerber automated CNC cutting system with large-format vacuum cutting table, intended for automated cutting of flexible materials and production components. Full functionality and cutting accuracy have been verified. Auction-ID: A7-50083-18

GERMITEC - Hypernova Chronos REF. AS1-V2 UVC Disinfection Chamber Ultrasound Probe Ultrasonic probe for disinfection chamber Auction-ID: A1-49756-102

No nameplate available ; This lot has not been tested for functionality. Parts may be damaged or missing. The seller does not guarantee traffic and operational safety; The dimensions, weights and other data given are to be understood as non-binding guideline values. No liability is assumed for the accuracy of the information ; Auction-ID: A1-50030-35

Table Area: 670 x 270 mm Wheel diameter: Between 270 mm and 330 mm Motor power: 1.5 kW Advances: Automatic Main use: Grinding engine cylinder heads, surfacing engine blocks and small flat parts. Auction-ID: A3-46161-39190

Surface grinding machine

The machine is technical and geometrically in a very good state. it was till 2years in use an application and any time inbetrieb are taken. Grter draggable Durchme?er 60 mm the smallest tench-cash Durchme?er 0.5 mm Schleifscheiben-Durchme?er 356 mm Schleifdcheiben width 150 mms control disc-Durchme?er 254 mms control discs width 150 mms Drehzahl-Schleifscheibe 1,780 revo impulse achievement main engine 7 kW speed-control disc 20-250 revos weight 2,900 kg Platzbetarf 8 m²

Discus level sanding machine with Vertikaler-Schleifspindel and Schleifradaufnahme f?r Ceramische-Schleifsegmente. Construction year 1957 the machine is technical and geometrically in very good state. it was waited up to Au?erbetriebsetzung 2006 regelmig. hydraulic table impulse: infinitely variable adjustably vertical delivery: hydraulically Schleifrad-Durchme?er: 600 mms impulse achievement: 22 kW Magnetabme?ung: 300 x 1,000 mms Schleiftischabme?ung: 400 x 1,700 mms

Number of sanding units: 2 St. sanding width: 290 mm Sanding height max.: 180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

K+G Wetter Angle-Grinder E 130mm, 130mm, all stainless steel, 2 speeds, sorting device, in very good condition. The machine is immediatley available and can be inspected in our facility in Koblenz, Germany.

Number of sanding units: 2 st. sanding width: 390 mm Sanding height max.: 390 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 2 St sanding width: 190 mm Sanding height max.: 2 - 180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 8 st. sanding width: 180 (260) mm Sanding height max.: 160 mm Dimensions (L/W/H): 3065x1600x1900 mm weight of the machine ca.: 1300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 4 St. sanding width: 200 mm Sanding height max.: 150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 2 St. sanding width: 100,150 mm Sanding height max.: , The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Seydelmann AU 200-B, 200 mm automatic grinder, all stainless steel, hopper capacity approx. 400 litres, 2 working worm speeds, 3 feeding worm Speeds, refurbished. The machine is immediately available, and can be tested in our facility in Koblenz, Germany.

Planetary grinders Manufacturer Precise In a suitcase with extensive zubehoer Rule transformer Tool holder SK40 with interchangeable tightening bolt Control range: 15000 - 45000 rpm Orbital speed 70 - 120 rpm when working horizontally max.: 70 rpm Radial delivery: 0.0001 - 0.002 mm Reception: SK40 electr. Connection: 220 V, 600 W Special price

Key data: 1025 mm, 1540 , 1090

Machine type: EVP 550 Manufacturer: ERBA Power kW: 4.0 Total volume: 585 lt. Description: The EVP 550 vibratory finishing machine from ERBA has a flat work container base without separation. Emptying or separation is carried out via bottom emptying (manual/pneumatic). It has a fully automatic PLC process control (optional) and, on request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligat ...

Key data: 2300 mm, 2026 , 1615

Machine type: EVP 1500 Manufacturer: ERBA Power kW: 11 Total volume: 1500 lt. Description: The EVP 1500 vibratory finishing machine from ERBA has a flat work container base without separation. Emptying or separation is carried out via bottom emptying (manual/pneumatic). It has a fully automatic PLC process control (optional) and, on request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without oblig ...

Machine type: YE 60 Manufacturer: ERBA Power kW: 0.3 Total volume: 50 lt. Description: The ERBA separation line YE 60 is used to separate workpieces and grinding medium. This can be used as a stand-alone machine or in combination with other machines, such as the ERBA Turbo (centrifugal power system). The separation floor can be changed quickly and easily depending on the requirements. Optionally, a frequency converter can be installed, which enables the infinitely variable adjustment of the motor speed. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation.  ...