135,630 used machines on RESALE, but how to find them? Machine Search
SINGLE SHAFT SHREDDER 150 kw (or 180 kw), sturdy structure in electro-welded steel, cutting chamber dimensions mm. 2000x1000, electro-welded sheet metal hopper for top loading, installed power on the rotor 75 + 75 kw optional 90 + 90 kw, hydraulic unit power 11 kw (15 HP), transmission by belts, 1 rotor, rotor diameter 480 mm., rotor length 2000 mm., 122 reversible tools, 4 usable tool sides, 8 upper fixed blades, 8 lower fixed blades, 73 average rotor revolutions/min., weight 13000 kg, production 3500-5000 kg/h, emergency stop, drawer inversion system, supports for bearings with sealing system against dust and liquids, Adjustable steel counterblade, hydraulically operated pusher drawer with 1000 mm of useful stroke, transmission system by means of pulleys and belts, electrical panel according to EEC standards with inverter, SIEMENS main internal board, Power: 150 kw or 180 kw, width: 2. ...
QUICK WASHER for RIGID and SOFT PLASTICS, made in AISI304 stainless steel, low water consumption, can be used with hot water or mild detergents, for reground LDPE LLDPE HDPE film, rigid PE PP PVC PET PA ABS PS PC, 7,5 kw motor 400V 50/60Hz, inner auger 400 mm diam., length 3.000 mm., material and water are loaded from the bottom, material discharging is done through a draining auger from top, bearings are positioned outside the wet chamber, seals on the lower bearing to exclude any contact with water, auger speed (and throughput rate) can be adjustable to change throughput rate 500 to 1.000 kg/h, by adding an inverter, Low water consumption (depending on contamination), The water can be mechanically filtered with a [water screening system](.germanplast.eu/listings/5003567-germanplast-vibrating-screen- round-type) (available separately), This machine is to be electrically connected to an ...
An overbelt metal separator is used to remove ferrous contamination from chopped scraps, on the extraction belt from a shredder. We offer different solutions in size and power even for stainless steel., Just send us your requirements and we will send you a most cost-effective, targeted offer., An overbelt metal separator is the easiest way to remove ferrous contamination from scraps., This machine is a available in different sizes, with different magnetic forces, Constructed according to the Italian Top Quality Standards, This is an example :, OVERBELT MAGNETIC TAPE SEPARATOR TYPE R60-80E, - 800 mm wide at a distance of 200 mm from the belt, - Construction characteristics :, - permanent magnet in bipolar conformation with low-carbon iron structure made with Sr Ferrite permanent magnets with high magnetic induction and great coercive force (guaranteed magnetic field strength 20 years), - ...
CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 30.000 lt. (or bespoke) vertical mixers which fill each other through the endless screw conveyor., for each mixer :, total height approx 9.500 mm including transmission group, max diam. 2400 mm.(standard transport) - 2 x LKW for the whole system, constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, loading hopper with conveying screw, bottom discharging on the other mixer, side discharging pipe to big bag with valve mm.at 2.500 mm from ground, electric level indicator, paddle type, electric motor 22 kw, complete with cont ...
GUILLOTINE REEL SLITTER 60 T, Working width 2.000 mm, Working height 1250 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of, conveyor belt, fork-lift tray to handle the reel before and after splitting, spare knife, Force: 60 T, working width: 2.000 mm. 78.74, working height: 1.250 mm.
SINGLE SHAFT SHREDDER 75 KW, sturdy structure in electro-welded steel, cutting chamber dimensions mm. 1300x1300, electro-welded sheet metal hopper for top loading, installed power on the rotor 75 kw (100 HP) optional 90 kw (120 HP), hydraulic unit power 5,5 kw (7,5 HP), transmission by belts, 1 rotor, rotor diameter 400 mm., rotor length 1300 mm., 80 reversible tools, 4 usable tool sides, 5 upper fixed blades, 5 lower fixed blades, 73 average rotor revolutions/min., weight 6200 kg, production 2500-3500 kg/h, emergency stop, drawer inversion system, supports for bearings with sealing system against dust and liquids, Adjustable steel counterblade, hydraulically operated pusher drawer with 800 mm of useful stroke, transmission system by means of pulleys and belts, electrical panel according to EEC standards with inverter, SIEMENS main internal board, Power: 75 KW, width: 1.300 mm. 51.18
SINGLE SHAFT SHREDDER 55 KW, sturdy structure in electro-welded steel, cutting chamber dimensions mm. 1100x1300, electro-welded sheet metal hopper for top loading, installed power on the rotor 55 kw (75 HP) optional 75 kw (100 HP), hydraulic unit power 5,5 kw (7,5 HP), transmission by belts, 1 rotor, rotor diameter 400 mm., rotor length 1100 mm., 66 reversible tools, 4 usable tool sides, 4 upper fixed blades, 4 lower fixed blades, 73 average rotor revolutions/min., weight 5500 kg, production 1200-2000 kg/h, emergency stop, drawer inversion system, supports for bearings with sealing system against dust and liquids, Adjustable steel counterblade, hydraulically operated pusher drawer with 800 mm of useful stroke, transmission system by means of pulleys and belts, electrical panel according to EEC standards with inverter, SIEMENS main internal board, Power: 55 kw
GUILLOTINE REEL SLITTER 60 T, Working width 3.500 mm, Working height 1.250 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T, installed power - used power in work: about 60-65% : 15
GUILLOTINE REEL SLITTER 60 T, Working width 3.000 mm, Working height 2.000 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T
GUILLOTINE REEL SLITTER 60 T, Working width 3.500 mm, Working height 850 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T, installed power - used power in work: about 60-65% : 15
GUILLOTINE REEL SLITTER 60 T, Working width 3.000 mm, Working height 1250 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T
GUILLOTINE REEL SLITTER 50 T, Working width 3000 mm, Working height 1500 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 20-41 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 50 T, installed power - used power in work: about 60-65% : 15
GUILLOTINE REEL SLITTER 50 T, constructed in sturdy painted steel,, Working width 3.000 mm, Working height 850 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 41-20 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 50 T
GUILLOTINE REEL SLITTER 50 T, Working width 2.500 mm, Working height 1.500 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 50 T
GUILLOTINE REEL SLITTER 35 T, Working width 2.500 mm, Working height 1.500 mm, Cutting force 2x17,5 Ton., No.2 pumps 30+30 lt/min, volume 21+21 ccm, Speed up: 84 mm/sec, Speed down : (80 Bar) 40-20 mm/sec, Oil tank 175 lt., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydrauliC pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer.
Our VERTICAL MIXER 5 to 30 m3 are used to blend different batches of one material and grant a more homogeneous quality within one lot., Please see our attached [PDF](drive.google/file/d/1kQKOuxvrbrpfSZBrVxh2jrXbJ7StrQMp/view?usp=d rive_link) and photos for different sizes availables., Another important task they are used for, is to complete cooling of materials after a heat related process, like regranulation or agglomeration, in order to avoid the possibility that materials, due to residual heat, clog into lumps., Our standard mixers for plastic materials are constructed in sturdy electro-welded steel, painted on the outer surface with an anti-rust layer and a protection coating. Installed in a sheltered, dry place they will perform at their best for years ., - inner auger diam.350 mm., - lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600 x ...
CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 20.000 lt. vertical mixers which fill each other through the endless screw conveyor. (ask for different capacities), for each mixer :, total height approx 6.950 mm including transmission group, max diam. 2.380 mm.(standard transport), constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters (possible gearbox, instead), inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, bottom discharging pipe on the other mixershopper with pneumatic valves, side discharging pipe to big bag with valve mm.at 2.700 mm from ground with pneumatic valves, electric min/max level indicator, paddle typ ...
QUICK WASHER for RIGID and SOFT PLASTICS, made in AISI304 stainless steel, low water consumption, can be used with hot water or mild detergents, for reground LDPE LLDPE HDPE film, rigid PE PP PVC PET PA ABS PS PC, 7,5 kw motor 400V 50/60Hz, inner auger 400 mm diam., length 3.000 mm., material and water are loaded from the bottom, material discharging is done from top, bearings are positioned outside the wet chamber, seals on the lower bearing to exclude any contact with water, auger speed is adjustable to change throughput rate 500 to 1.000 kg/h, throughput rate can be adjusted according to contamination and material, Low water consumption (depending on contamination) About 60 lt., The water can be mechanically filtered with a [water screening system](.germanplast.eu/listings/5003567-germanplast-vibrating-screen- for-water-powder-granule) (available separately) to be reused in the proces ...
AUTOMATIC VERTICAL BINDING BALER, for FILM, WOVEN PP, PET, RIGID AND SOFT PLASTICS, PAPER, CARDBOARD and more, 80 Tons ca. pressing force, 45 kw drive, complete with oil heating and cooling systems, proportional pressure flow controller, Bale size LxWxH 1.100x720 mm (adjustable length), feeding hopper size : 1.100 x 1.600 mm., Average throughput rate, - with 30 kg/m3 materials 5-7 Ton/h, - with 50 kg/m3 materials 9-11 Ton/h, - with 120 kg/m3 materials 17-19 Ton/h, 5 vertical-wire binding, Cycle with no material, no twisting : 25 ca, Pre-press flap with 2 x 20 Ton force, Exchangeable bottom plate in hardox in channel and chamber, oil tank capacity 950 lt., Machine weight ca.25.000 kg., General features, common to all balers:, Construction ìn sturdy carbon steel with top EU components., Compact and easy to use, Automatic binding, Fully automatic with adjustable parameters on touch screen ...
AUTOMATIC VERTICAL BINDING BALER, for FILM, WOVEN PP, PET, RIGID AND SOFT PLASTICS, PAPER, CARDBOARD and more, 100 Tons ca. pressing force, 45 kw drive, complete with oil heating and cooling systems, proportional pressure flow controller, adjustable channel pressure, Bale size LxWxH 1.100x720 mm (adjustable length), Filling hopper size 1.100 x 1.600 mm., Average throughput rate, - with 30 kg/m3 materials 6-8 Ton/h, - with 50 kg/m3 materials 10-12 Ton/h, - with 120 kg/m3 materials 18-20 Ton/h, 5 vertical-wire binding, upper and lower photocells to control material feeding feeding, Cycle with no material, no twisting : 22 ca, Pre-press flap with 2 x 20 Ton force, Exchangeable bottom plate in hardox in channel and chamber, Baler weight ca.27.000 kg., General features, common to all balers:, Construction ìn sturdy carbon steel with top EU components., Compact and easy to use, Automatic bind ...
AUTOMATIC VERTICAL BINDING BALER, for FILM, WOVEN PP, PET, RIGID AND SOFT PLASTICS, PAPER, CARDBOARD and more, 120 Tons ca. pressing force, 90 kw drive, complete with oil heating and cooling, proportional pressure flow controller, Filling hopper 1.100 x 1.600 mm., Bale size LxWxH 1.100x720 mm (adjustable length), Average throughput rate, - with 30 kg/m3 materials 6-8 Ton/h, - with 50 kg/m3 materials 11-13 Ton/h, - with 120 kg/m3 materials 19-22 Ton/h, 5 vertical-wire binding, Cycle with no material, no twisting : 21 ca, Pre-press flap with 2 x 26 Ton force, Exchangeable bottom plate in hardox in channel and chamber, Machine weight ca 28.500 kg, oil tank capacity : 1.500 kg, General features, common to all balers:, Construction ìn sturdy carbon steel with top EU components., Compact and easy to use, Automatic binding, Fully automatic with adjustable parameters on touch screen panel., A M ...
LIFTING AUGER, for regrinds, box housing mm.400 outer Ø, internal spiral 300 mm Ø, bearings with dust protection, Length 8,5 mt., Collection hopper 900 x 500 mm (or bespoke), exhausting outlet, intermediate supports every 3 mt., Bonfiglioli gearbox, 5,5 kw drive, complete with Users manual. CE compliance and el,.drawings, installed power - used power in work: about 60-65% : 5.5, availability: ca 4 weeks from confirmation, conditions: new machine, type: to collect and lift materials
Distance between points: 1000 mm, Height of points: 180 mm, Max. diameter to be rectified: 355 mm, Max. piece weight between points: 300 Kg, Max. weight with plate: 125 Kg, Transverse travel of the carriage (X axis): 350 mm, X-axis speed: 0.01 / 6.000 mm/min, X-axis Resolution: 0.0001 mm, X-axis measurement system: Digital ruler, Longitudinal travel of the carriage (Z axis): 1.300 mm, Z-axis speed: 0.01 / 15,000 mm/min, Z-axis resolution: 0.0001 mm, Z-axis measurement system: Digital ruler, Working wheel dimensions (od x id x width): Ø500 x Ø203 x 80 mm, Main engine power: 7,5 Kw, Angle of rotation of the grinding head: -30º / +210º, Workhead rotation speed: 10 / 800 rpm, Workpiece holder head cone: MORSE 5, tailstock cone: MORSE 4, Ø of the tailstock shank: 60 mm, Course of the counterpoint reed: 40 mm, Dimensions: 4600 mm Length x 2400 mm Width x 2050 mm Height, Weight approx.: 6. ...
Distance between points: 1000 mm, Height of points: 180 mm, Max. diameter to be rectified: 355 mm, Max. piece weight between points: 300 Kg, Max. weight with plate: 125 Kg, Transverse travel of the carriage (X axis): 350 mm, X-axis speed: 0.01 / 6.000 mm/min, X-axis Resolution: 0.0001 mm, X-axis measurement system: Digital ruler, Longitudinal travel of the carriage (Z axis): 1.300 mm, Z-axis speed: 0.01 / 15,000 mm/min, Z-axis resolution: 0.0001 mm, Z-axis measurement system: Digital ruler, Working wheel dimensions (od x id x width): Ø500 x Ø203 x 80 mm, Main engine power: 7,5 Kw, Angle of rotation of the grinding head: -30º / +210º, Workhead rotation speed: 10 / 800 rpm, Workpiece holder head cone: MORSE 5, tailstock cone: MORSE 4, Ø of the tailstock shank: 60 mm, Course of the counterpoint reed: 40 mm, Control type (CNC/manual): CNC, CNC brand: FAGOR, CNC model: 8040-T, Dimensions ...
CONVEYOR BELTS, for waste material and more, sturdy steel structure, constructed in a workman like manner, Italian quality and components, can be lined in PVC, RUBBER or SHUTTER TYPE BARS, Can be prepared and fitted for METAL DETECTORS, and completed with OVERBELT METAL SEPARATORS, Size and characteristics bespoke to the project., Just fill your enquiry with the following data:, - Materials to be transported (photos appreciated), - Quantity in Tons/h, - required working width, - total length, - horizontal length, - diagonal length, - heigh of discharging point, - if prepared for metal detecto, - if fitted with metal detector (in this case, please add maximum contamination size), - if positioned in covered/uncovered place, We will send you a most targeted offer.
DUAL-SHAFT HYDRAULIC SHREDDER, Loading hopper, Sturdy supporting structure in carbon steel, shredding surface 1.300 x 960 mm ca, 2 counter-rotating steel shafts, 75 mm thick knives, 2 hooks, max speed 18 rpm, planetary gearbox, Hydraulic motor 90 kw (120Hp) 400 V/50 Hz (can be fitted with a 75 kw drive), hydraulic power unit,, 400 lt. oil tank, automatic overload reversal with programmable number of reverse cycles, control panel with electronic system to set maximum number of inversions, cooling fan, Complete with electrical drawings, user manual, CE compliance, Possible addition of loading and extraction belt with magnetic separator, width: 1.300mm, availability: 70 days ca, conditions: reconditioned, Power: 90 kw
DUAL-SHAFT HYDRAULIC SHREDDER, shredding surface 1.000 x 850 mm ca, including loading hopper, Sturdy supporting structure in carbon steel, 2 counter-rotating steel shafts, n.20 x 50mm.thick knives (or bespoke), Hydraulic motor 37 kw, 400 V/50 Hz, hydraulic power unit,, 200 lt. oil tank, control panel, automatic overload reversal with programmable number of reverse cycles, Complete with electrical drawings, user manual, CE compliance, Possible addition of loding and extraction belt with magnetic separator, width: 1.000 mm, availability: 150 days ca, conditions: reconditioned, Power: 37 kw, Special Features: Interesting prices for these IT shredders, starting from 135 k€ for a hydraulic machine
We are offering for sale a Robotic 3D welding station consisting of a welding robot and two rotary tables. Manufacturer: Gernert Schweißtechnik Model: OTC DR 4200L Year of Manufacture: 2001 Find more here - .ucymachines/ Contact us at - sales@ucymachines
A GM Gera bottle cleaning system is available. Throughput capacity with 1l PET bottles: 13000 bottles/h, bottle cells: 3240 pieces, cells per basket row: 18, cell pitch: 110mm, chain pitch: 169mm, total treatment time: approx. 15min, total immersion time: approx. 7.5min, housing material: stainless steel (SST). System dimensions X/Y/Z: approx. 8900mm/4200mm/3350mm, weight: approx. 23650kg, operating hours (09.2025): approx. 14300h. Documentation available. An on-site inspection is possible. Expected to be available from mid-March 2026.
DRAINING AUGER, construction in aisi 304 stainless steel,, case diameter (U-shape) 380 mm, total length 4.500mm,, internal stainless steel spiral diam. 230mm,, drainage with stainless steel perforated plate L=3.500 mm,, nr.6 hinged side doors,, gear motor power 2.2 kw, installed power - used power in work: about 60-65% : 2.2
BUFFER SILO 15.000 lt. (or 8.000 - 12.000 - or bespoke), barrel Ø 2,2 mt. - height 3.0 mt., overall height 5,23 mt, made in electro-welded carbon steel sheet, sturdy supporting structure, internal rotor with spiral and agitator arms, inspection hatch on barrel wirh safety devices, bonfiglioli gearbox, power 3 kw electric motor, transmission with elastic coupling, finish painted externally with rustproofing and enamel, CE compliance + instruction manual, installed power - used power in work: about 60-65% : 3
Gericke CSM centrifugat rotary sifter Stainless steel Year 1998 CM 215009
Modular vise, jaw width 125mm Gerardi Modular 125 Stable Machine Vise, Drill Vise Total length approx. 345mm Clamping range approx. 150mm Jaw width 125mm with pull-down jaws Additional prism jaw Mechanical clamping actuation with 19mm wrench or ratchet The machine can be demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse, see "other offers of this year". provider".
BAG FILLING STATION WITH LIFTING AUGER, single or double bag filling station for 1000 kg. (apprx) big bags, all made in sturdy carbon steel structure
Circular screen feeder with a maximum filling volume of 1,000 l.; Motor power spread arm: 15 kW; Motor power turntable: 0.55 kW. Container diameter: 1200 mm; Plate diameter: 1600 mm; Hopper diameter at the top: 1400 mm. Discharge height: Approx. 730 mm; Screen height: 300 mm / Perforations: 30 x 15 mm (oval). Spreading arm provided with scraper plates made of Hardox. The scope of delivery includes a control cabinet with frequency converters for regulating the speeds of the platter and spreading arm.
General SKU396U1165 LocationBarneveld CEcheck MakeGerteis Maschinen Processingeneering AG Type1-W-POLYGRAN 250/240 Main Features MaterialStainless steel Width230 mm Specified Features - Sieve granulator Granulating sievecheck Rotor sizesdia. 240 x 230 mm Sieve sizesdia. 250 x 230 mm Sieve perforation1,5 mm With hopper50 ltr. InletDia. 315mm Motor400 volt (servo motor) With variable speed drivecheck Speed20-180 rpm MaterialStainless steel 1.4301 (304), Stainless steel 1.4435 (316L) General No.1065 Year of construction1997 Mounted on wheelsrail system With switchgearcheck Floor space1,30 x 0,85 m Total height1,60 m Weight520 kg Extra SpecificationsSpeed left and right 20-180 rpm, typical 75 rpm,rotation angle left and right 0/720 degrees, typical 270 degrees.Powdered foodsSieve granulatorsFine chemicalsStarchAgrochemicalsSpicesCatalysts & fillersFeed additivesC ...
General SKU292N352 MakeGericke ag Mounted on framecheck Main Features MaterialStainless steel Specified Features - Silo Silocheck Closedcheck Diameter1000mm Cylindrical height1500mm Conical height800mm Flat topcheck Inlettangential, (1x) 80mm Top connectionssystemfilter 4206 0306/10-2 OutletGericke RA 550, dia.200mm MaterialStainless steel General LocationBarneveld Floorspace1,3x1,3 M Total height3,2 M Weight500 KGPaints & coatingsPowdered foodsOintmentsFine chemicalsStarchRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesDetergent & surf.SugarAnimal feedSilosOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicGerickeIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > OintmentsIndustries > Chemical > Fine chemicalsIndustries > Food & Feed > StarchIndustries > Chemical > Rubbe ...
General SKU316S537 LocationBarneveld CEcheck Main Features MaterialStainless steel Motor0.55 KW Inlet diameter250 mm Specified Features - Metering screw Metering screwcheck Screw diameter85 Pitch85 Shaft diameter21 Screw length600mm With hoppercheck InletDia: 250mm(2x), Dia: 100mm, 150x150mm OutletDia 145 and 100mm (3x) With motor0,55kW, 400Volt, 1400rpm Screw speed10,5-104 rpm With jacketcheck Metering screws MaterialStainless steel 1.4571 (316Ti) General MakeGericke Typeingredënten dosering Year of construction2010 Mounted on framecheck Floorspace2,3x2,1m Total height3,1m Weight1000kg Extra Specificationsfitted with Gericke DBW-300 metering beltspecifications:length: 1800mmwidth: 300mmthis dosing unit includes 3 dosing screws:#1Screw Dia: 85mmpitch: 85mmLength:600with ribbon mixer:± 165mmx75, Length :250mm#2screw Dia: 40mmpitch: 30mmlength:600mmwith rib ...
Guillotine, reel slitters for paper and plastics 50 T, Working width 2.500 mm, Working height 850 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 20-41 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulik pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., See item [RES100](.germanplast.eu/listings/4115633-guillotine-reel-slitter) for full description., Force: 50 T
GUILLOTINE PAPER AND FILM REEL SLITTER 50 T, Working width 2.500 mm, Working height 1.250 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 20-41 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., See item [RES100](.germanplast.eu/listings/4115633-guillotine-reel-slitter) for full description., Force: 50 T
Guillotine, reel slitters for paper and plastics 2500x850mm, Working width 2.500 mm, Working height 850 mm, Cutting force 2x17,5 Ton., no.2 pumps 30 + 30 l/min, Pump volume 21+ 21 ccm, Speed up 84 mm/sec, Speed down (80 Bar) 20-40 mm/sec, Oil tank 175 lt., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T
Guillotine, reel slitters for paper and plastics 35 T, constructed in sturdy painted steel,, Working width 2.500 mm, Working height 1.250 mm, No.2 pumps 30+30 lt/min Volume 21+21 ccm, Speed up : 84 mm/sec, Speed down : (80 Bar) 40-20 mm/sec, Oil tank 175 lt, Cutting force 2x17,5 Ton., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Increased speed system, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T
Guillotine, reel slitter for paper and plastics 25 T, NOW IN STOCK, Working width 1.500 mm, Working height 850 mm, Cutting force 1x25 Ton., 7,5 Kw drive 400V 50 Hz, No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, OIl tank : 135 lt., With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 25 T, availability: NOW IN STOCK
Guillotine, reel slitters for paper and plastics 50 T, Working width 3.000 mm, Working height 1.250 mm, No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 41-20 mm/sec, Oil tank 255 lt., Cutting force 2x25 Ton., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 50To, installed power - used power in work: about 60-65% : 15
Guillotine, reel slitters for paper and plastics 30T, Working width 1.500 mm Working height 1.250 mm Cutting force 1×30 Ton., No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, Oil tank : 135 lt. Single piston with 2-sides racks to avoid any oscillations and swaying 7,5 Kw drive 400V 50 Hz Safety devices included : Emergency STOP button+ pull-rope STOP+ Knife protection + 2-hands operation + protection grids + hydraulic knife locking system. hydraulic pack can be lodged on top for space saving Complete with control panel User’s manual, drawings, CE compliance for overseas transport, you will need an out-of-gauge 20’fcl Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Size for transport: LxWxH 2,5 x 1,5 x 2,50 m. + 0,8 x 0,6 x 1,0 m. (hydrauluc pack), Force: 30 T, width: 1.500 mm.(59.06), height (cutting): 1.250 ...
Guillotine, reel slitter for paper and plastics 60 T, Working width 3.000 mm, Working height 1.500 mm, Increased speed system, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T
Guillotine, reel slitters for paper and plastics 60 T, Working width 3.500 mm, Working height 1.500 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T, installed power - used power in work: about 60-65% : 15
Guillotine, reel slitters for paper and plastics 60 T, Working width 3.500 mm, Working height 2.000 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T
Guillotine, reel slitters for paper and plastics 35 T, Working width 2.000 mm, Working height 1.500 mm, Increased speed system, Cutting force 2x17,5 Ton., no.2 pumps 30 + 30 l/min, Pump volume 21+ 21 ccm, Speed up 84 mm/sec, Speed down (80 Bar) 20-40 mm/sec, Oil tank 175 lt., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T
maximum number of results exceeded
please refine your search
