ger grinder used for sale

Manufacturer: Berthiez Model: VG 100 Condition: Used Stock number: 9513 Table diameter: 1000 mm Weight: 10000 kg

Okamoto ACC818NC Grind-X Precision Surface Grinding Machine Type: CNC surface grinding machine Manufacturer: Okamoto Model: ACC818NC – Grind-X Year of build: 2019 Serial number: Not visible Control: CNC Application: Precision surface grinding Power supply: 3 phase, 200 V, 50 Hz Control circuit: AC100 / DC24 V Total power: Approx. 9 kVA / 6.5 kW Main motor power: Approx. 2.2 kW Maximum load current: 30 A Short circuit interrupting capacity: 5 kA Installation dimensions: approx. 2105 x 1611 x 2233 mm Machine weight: approx. 1800 kg Grinding capacity: Maximum workpiece length: approx. 450 mm Maximum workpiece width: approx. 200 mm Maximum grinding height: approx. 350 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-49922-72

Technical data Manufacturer: G+H Machine Type: Surface Grinding Machine Grinding area: 600 x 450 mm Magnetic plate: 600 x 400 mm Clamping surface to spindle center: 140–525 mm Max. table load: 600 kg Max. table longitudinal movement: 650 mm Max. transverse movement: 400 mm Table speed: 5–35,000 mm/min Transverse and vertical speed: 100–1,000 mm/min Grinding wheel: 300 x 50 x 76.2 mm Max. grinding wheel Ø: 300 mm Spindle motor: 7.5 kW Total connected load: approx. 15 kW Operating voltage: 400 V / 3 phases Mains frequency: 50 Hz Machine weight: approx. 2,100 kg Configuration Standard magnetic plate 600 x 400 mm, electric infeed with 0.001 or 0.01 mm per increment, abrasive media holder 20–30 mm. Remarks The technical information was taken from the operating instructions that came with the machine. Scope of functions and scope of delivery accordin ...

The machine is in good technical condition; testing is possible by prior arrangement. 2 UNITS

Power: 6 kW Working parameters: grinding length 4000 mm; feed rates 7 m/min and 14 m/min Equipment included: long magnetic table, movable grinding head, coolant, grinding wheel and magnetization controls Power supply: 380 V Remarks: Machine no. 1059 76. Auction-ID: A1-50001-7

Auction-ID: A1-50026-41

Double grinding stone, 2820 rpm, Sharpening stones D= 200 x 20/25 mm. Auction-ID: A1-48994-57

Grinding stone on stand, 2750 rpm, Sharpening stones D= 200 x 35 mm. Auction-ID: A1-48994-54

Auction-ID: A1-50026-40

- Max afstand tussen de punten: 7100 mm - Max bewerkingslengte: 6600 mm - Max werkstukgewicht tussen de punten: 18 ton - 2x 2 brillen worden meegeleverd met de machine - Max conische slijphoek: 10° - Max concaaf/convex slijpen: max 12,7 mm van de diameter - 1 bed met slijpkop (in twee delen over de lengte) en 1 werkstukbed met aandrijfkop en tegenpunt. - 1 filtereenheid - 1 elektrische kast Center distance: 7100 mm Max dia of the workpiece: 1100 mm Control: Num 1060 Motorpower: 90 kW Weight: 126 ton

CONTROLS   CNC controls FANUC SERIES 18-M WORKING RANGE -CUBIC-   X-axis travel: 500 mm   Y-axis travel: 300 mm   W-axis travel: 450 mm   rotating range C-axis from: 0 °   rotating range C-axis up to: 360 ° TABLE   table surface (left-right): 600 mm   table surface (front-back): 380 mm   workpiece load (max): 300 kg ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1800 mm   space requirements -front/back-: 2000 mm   total height: 3165 mm   total weight approx.: 3100 kg

charge load: 125 liter : 1.000 mm tank diameter / tank height: 920 / 480 mm : 210 mm voltage: 380 V weight of the machine ca.: 630 kg dimensions of the machine ca.: 1,10 x 1,50 x 1,30 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used industrial Christen precision tool and cutter grinder, carrying a Hahn & Kolb, Stuttgart distributor/dealer badge. The machine appears to be a specialised universal grinder intended for sharpening and regrinding cutting tools such as drills, milling cutters and similar tooling. Equipped with an adjustable grinding head, grinding wheel with guard, indexed tool-holding/workhead assembly, multiple graduated adjustment controls and handwheels. The machine is mounted on an integrated pedestal cabinet and is supplied with various tool holders, arbors, collets and other grinding accessories stored in the cabinet, as pictured. Operational condition has not been verified; offered in its current condition as pictured. Auction-ID: A7-50083-28

inv 6209 - Grinder Manufacturer: Dyno-Mill Wab Model: KD5 Year: 1994, upgraded to ATEX standards in 2005 Serial Number: 940929 Capacity: 5 liters With trolley Overall dimensions (W x D x H): 1500 x 1130 x 2030 mm Weight: 585 kg Power supply: 380 V / 11 kW Auction-ID: A1-49706-135

Number of sanding units: 6 st. sanding width: 45-165 mm Sanding height max.: 45-92 mm weight: 2200 kg Ecoline Q-SAND 6 For sale on behalf of a customer -------------------------------------------- Full text as PDF attachment! Short description: Machine with infeed conveyor and automatic height detection. It has two grinding discs on top and two grinding discs on the bottom, each connected to a brush unit. Technical manufacturers description: Ecoline Q-Sand: the ideal grinder for squared timber and more. Designed to work on both sides of the workpiece with three-dimensional adjustment, the Q-Sand guarantees maximum precision and uniformity. It is equipped with grinding discs, flap brushes, and a double disc for more effective material removal, thus improving adhesion for subsequent treatments. The Q-Sand can be installed in a production line or, due to its complete operational autonomy, c ...

Belt sander: This machine can also be mounted without a base. Therefore, it is suitable as a table belt sanding machine. Belt width 100 mm Strap length 1220 mm Belt speed 1140 m/min. Package size max. 0.62 x 0.4 x 0.35 cm Total power requirement 1.5 kW Machine weight approx. 0.04 t Dimensions L x W x H 0.97 x 0.67 x 0.37 m Condition: never used / new (5) Auction-ID: A7-50084-23

Combined belt grinding and pipe grinding machine with - Abrasive belt K 40 - with 7 grinding rollers. 20, 28, 32, 41, 48, 60 and 76mm Sanding belt direction left/right Belt width 100 mm Belt length 2000 mm Belt speed 15/30 m/sec Tube diameter 20 - 76 mm Angle adjustable from - to 30 - 90 degrees Connection voltage 400 V Total power requirement 2.5 /3.3 kW Machine weight approx. 0.19 t Space requirement approx. 1.2 x 0.75 x 0.7 m Condition: never used / new (5) Auction-ID: A7-50084-105

Combined belt grinding and pipe grinding machine with - Abrasive belt K 40 - with 7 grinding rollers. 20, 28, 32, 41, 48, 60 and 76mm Sanding belt direction left/right Belt width 100 mm Belt length 2000 mm Belt speed 15/30 m/sec Tube diameter 20 - 76 mm Angle adjustable from - to 30 - 90 degrees Connection voltage 400 V Total power requirement 2.5 /3.3 kW Machine weight approx. 0.19 t Space requirement approx. 1.2 x 0.75 x 0.7 m Condition: never used / new (5) Auction-ID: A7-50084-15

Belt sander with - Contact disc: 600 x 150 mm Belt width 150 mm Belt length 2000 mm Belt speed 33 m/sec Total power requirement 4 kW Machine weight approx. 100 t Space requirements approx. 1.2 x 0.5 x 0.85 m Condition: never used / new (5) Auction-ID: A7-50084-95

Belt sander with - Contact disc: 200 x 75 mm - Continuous surface grinding table: 75 mm Belt width 75 mm Belt length 2000 mm Belt speed 37 m/sec Total power requirement 3 kW Machine weight approx. 0.105 t Space requirement approx. 1.2 x 0.5 x 1.0 m Condition: never used / new (5) Auction-ID: A7-50084-207

Belt sander with - Contact disc: 600 x 75 mm Belt width 75 mm Belt length 2000 mm Belt speed 30 m/sec Total power requirement 3 kW Machine weight approx. 70 t Space requirements approx. 1.2 x 0.5 x 0.75 m Condition: never used / new (5) Auction-ID: A7-50084-7

Power Cutter Grinding wheel 250mm Speed 2880rpm Motor 1.1KW with various grinding wheels with vice and dial gauge stroke Coolant system Connection voltage 380Volt see pictures Condition: unchecked (6) Auction-ID: A7-50084-199

Belt width 75 mm Belt length 2000 mm Belt speed 30 - 34 m/sec Total power requirement 4.1 HP Machine weight approx. 75 kg Space requirements approx. 1.2 x 0.5 x 0.85 m Condition: never used / new (5) Auction-ID: A7-50084-140

Belt width 150 mm Belt length 2000 mm Belt speed 30 - 34 m/sec Total power requirement 4.8 HP Machine weight approx. 100 kg Space requirements approx. 1.2 x 0.5 x 0.85 m Auction-ID: A7-50084-201

The air grinder is a great tool for grinding/grinding, deburring, shaping/milling, and engraving on a variety of different materials. Auction-ID: A7-50066-296

Technical data Supply voltage: 230 V / 50 Hz Motor power: 700 W Motor speed: 26000 rpm Spindle diameter: 6 mm Auction-ID: A7-50066-88

The air grinder is a great tool for grinding/grinding, deburring, shaping/milling, and engraving on a variety of different materials. Auction-ID: A7-50066-96

Technical data Supply voltage: 230 V / 50 Hz Motor power: 700 W Motor speed: 26000 rpm Spindle diameter: 6 mm Auction-ID: A7-50066-188

Bench grinder and sander ideal for polishing, deburring, edge chamfering and finishing. Auction-ID: A7-50066-69

Suitable for cutting and sanding masonry, concrete and steel Auction-ID: A7-50065-23

Suitable for cutting and sanding masonry, concrete and steel Auction-ID: A7-50066-23

The air grinder is a great tool for grinding/grinding, deburring, shaping/milling, and engraving on a variety of different materials. Auction-ID: A7-50066-196

Bench grinder and sander ideal for polishing, deburring, edge chamfering and finishing. Auction-ID: A7-50066-269

Suitable for cutting and sanding masonry, concrete and steel Auction-ID: A7-50065-123

Technical data Supply voltage: 230 V / 50 Hz Motor power: 700 W Motor speed: 26000 rpm Spindle diameter: 6 mm Auction-ID: A7-50065-188

Suitable for cutting and sanding masonry, concrete and steel Auction-ID: A7-50066-123

Bench grinder and sander ideal for polishing, deburring, edge chamfering and finishing. Auction-ID: A7-50065-69

22,000 rpm, spindle Ø6 mm, maximum wheel capacity 25 mm, never used Overall dimensions: 250 x 200 x 100 mm Weight: 2 kg Auction-ID: A7-50208-311

Bench grinder and sander ideal for polishing, deburring, edge chamfering and finishing. Auction-ID: A7-50065-169

Suitable for cutting and sanding masonry, concrete and steel Auction-ID: A7-50066-223

Bench grinder and sander ideal for polishing, deburring, edge chamfering and finishing. Auction-ID: A7-50066-169

Bench grinder and sander ideal for polishing, deburring, edge chamfering and finishing. Auction-ID: A7-50065-269

The air grinder is a great tool for grinding/grinding, deburring, shaping/milling, and engraving on a variety of different materials. Auction-ID: A7-50065-296

The air grinder is a great tool for grinding/grinding, deburring, shaping/milling, and engraving on a variety of different materials. Auction-ID: A7-50065-196

The air grinder is a great tool for grinding/grinding, deburring, shaping/milling, and engraving on a variety of different materials. Auction-ID: A7-50065-96

Technical data Supply voltage: 230 V / 50 Hz Motor power: 700 W Motor speed: 26000 rpm Spindle diameter: 6 mm Auction-ID: A7-50066-288

Technical data Supply voltage: 230 V / 50 Hz Motor power: 700 W Motor speed: 26000 rpm Spindle diameter: 6 mm Auction-ID: A7-50065-288

Rotor power: 45 kW Auxiliary power: 8 kW Total power: 53 kW Power supply: 400 V / 50 Hz Protection: 125 A Year: 2022 Weight: approx. 3400 kg Equipment: control cabinet, console, documentation Auction-ID: A1-50223-106

Suitable for cutting and sanding masonry, concrete and steel Auction-ID: A7-50065-223

CONTROLS   CNC controls FANUC 0I-TFP WORKING RANGE CYLINDRICAL GRINDING   swing diameter (max): 350 mm   workpiece weight between centers (max): 80 kg WORKING RANGE EXTERNAL GRINDING   grinding diameter (max): 350 mm   grinding length: 400 mm WORKPIECE SPINDLESTOCK   spindle revolutions (max): 1500 /min   drive power: 3 kW   spindle bore diameter: 30 mm   tool fixture: MK 5   c-axis: yes   - positioning/indexing: 0.5 ° TAILSTOCK   distance betw. centers (max): 400 mm   sleeve stroke: 60 mm   taper: MK 4 SPINDLESTOCK GRINDING SPINDLE   X-axis travel: 370 mm   Z-axis travel: 500 mm   tilting range (B-direction) min: 60 °   drive power: 9 kW GRINDING TOOL   diameter (max): 500 mm   borehole: diameter: 203.2 mm   width: 63 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx ...