generator natural gas used for sale

Offer 24603 Specifications: - Suitable for welding steel, aluminum special metals, Cr Ni, etc. - Welding current 450 A 60% ED - 360 A 100% ED - Welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - FRONIUS water cooling unit - Separate wire feeder case - Intermediate package device – wire feeder case 10 m - 4 rolls of wire feeder infinitely adjustable - MIG - MAG Hosepack water-cooled approx. 4 m - Ground cable -Reducer - Mobile undercarriage - Connection 400 V / 6.6 A / 8.7 kVA - Space requirement approx. W 650 x H 900 + 450 x D 1100 mm - Weight approx. 200 kg

Offer 24604 Specifications: - Suitable for welding steel, aluminum special metals, Cr Ni, etc. - Welding current 450 A 60% ED - 360 A 100% ED - Welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - FRONIUS water cooling unit - Separate wire feeder case - Intermediate package device – wire feeder case 1 m - 4 rolls of wire feeder infinitely adjustable - MIG - MAG Hosepack water-cooled approx. 4 m - Ground cable -Reducer - Mobile undercarriage - Connection 400 V / 6.6 A / 8.7 kVA - Space requirement approx. W 650 x H 900 + 450 x D 1100 mm - Weight approx. 200 kg

Machine Type: MIG/MAG Inverter Welding Machine Make Merkle Type MobiMIG 180 K Serial No. 89.754 Connection voltage 1 x 230 Volt Adjustment range 25 – 180 amps Duty cycle 20% ED at 180 amps 60% ED at 110 amps Current adjustment infinitely variable Cooling inverter through built-in fan Cooling burner gas-cooled Portable assembly system design Wire Feeder 2-Roller Gearbox Fuse 16 Ampere Dimensions L x W x H 450 x 210 x 480 mm Special Accessories ColdMIG Welding Process E-welding, MIG soldering, cored wire welding Weight 17 kg Age 12 years Condition workshop tested, very good incl. UVV workshop test report Scope of supply welding system with the following accessories: 1 piece of welding torch SBT 157 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire D-200 coil, 5 kg 1 can of non-stick sp ...

1. J616C Engines (2 units) Power: 2519 kVA General Overhaul (E60): 2011 Operating hours since overhaul: 20,503 Year of Manufacture: 1997 Serial numbers: 1200959 / 1200956 2. J320 GS S04 Engine (1 unit) Power: 2519 kVA General Overhaul (E60): 2011 Hours of operation since overhaul: 19,059 Year of Manufacture: 1997 Serial Number: 1200954 Scope of Supply: Diane XT3 Control Panel GEC ALSTHOM transformers ( 3 units: 2x2500 kVA, 1x1600 kVA) Gas Line Heat exchanger Fume exchanger Pumps Tabletop Cooler - ( Radiators ) Oil tank

Trumpf 3030 3000W 1999 Perfect machine, always under maintenance, with a new 3200 generator. CNC Siemens (no Bosch) Complete with everything, including disassembly.

Trumpf 3030 3000W 1999 Perfect machine, always under maintenance, with a new 3200 generator. CNC Siemens (no Bosch) Complete with everything, including disassembly.

Trumpf 3030 3000W 1999 Perfect machine, always under maintenance, with a new 3200 generator. CNC Siemens (no Bosch) Complete with everything, including disassembly.

Key data: 8000 KW, 750 1/min

Complete natural gas Power plant based on a Engine Manufacturer: WARTSILA Engine Model: W16V34SG Engine Power: 8000 KW Year of Manufacture: 2015 Total Operating Hours: 37 000 hours since new

I am pleased to offer for sale the complete Heat Recovery Steam Boiler with gas burner. Please see below key details about the power plant: Boiler Manufacturer: GEA - DELTAK Capacity: 20 ton / hour at 25 bar Year of Manufacture: 2006

We offer an MWM engine TCG 2032 V16 for sale. Specifications: Engine: MWM Type: TCG 2032 V16 Power: 3000 kW, (Actual power is 4000 kW, it has been reduced) Year of Make: 2009 Runninghours: 67,000 h

TO WHOM IT MAY CONCERN; WE VE 2 PCS USED REPORTED EXHAUST GAS TURBOCHARGERS ABB TPS 57 - D01 AT STOCK PLS FIND DETAILS ON BELOW TYPE TPL 57-D01 HT 466584 & 466585 N MAX 718 TMAX 650 nMAX 682 620 PLS FIND SERVICE REPORT ON FILES SECTIONS IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US With Kind Regards ; Aliaga Marine Services E-mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 abc.aliagamarine.com TURKEY

Machine type: MIG/MAG welding machine Make MERKLE Type ME 282 LK N Connection voltage 3 x 400 volts Adjustment range 40 – 280 amps Duty cycle 15% ED at 280 amps 60% ED at 200 amps Current setting 7 switching levels Point and interval setup Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire Feeder 2-Roller Drive Fuse 16 Ampere Dimensions L x W x H 885 x 375 x 590 mm Weight 80 kg Age approx. 25 years Condition workshop tested, good incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch SB 307 G, 3 mtr. long 1 piece ground cable permanently mounted 1 piece pressure reducer 1 roll of welding wire D 300, 5 kg 1 pair of welding gloves with cuff 1 piece spare parts box complete Equipped 1 can of ME 4000 non-stick spray 1 Piece ...

Machine type: MIG/MAG welding machine Make Merkle Type ME 202 LK Connection voltage 3 x 400 volts Adjustment range 30 – 200 amps Duty cycle 20% ED at 200 amps 60% ED at 120 amps Current setting 7 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 2-roller drive Fuse 10 Ampere Dimensions L x W x H 780 x 360 x 590 mm Weight 62 kg Special accessories for point and interval equipment 2/4-stroke gearshift Age approx. 30 years Condition workshop tested very good incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire 0.8 mm Ø, D 300, 5kg 1 can of non-stick spray 1 piece spare parts box complete Equipped 1 Piece Instructi ...

INDUSTRIAL GAS TURBINE Brand: Rolls-Royce Model: 501-KB5s-DLE Maximum pressure: 1,205 PSI Condition: Pre-owned / Overhauled : Industrial Equipment Operational Period: 1999 - 2011 Total Running Hours: 39,500 hours Documentation: I am reviewing the documents and will send you the key details shortly

Perkin Elmer Clarus 500 with autosampler and 2 x FID, currently serviced

Welding machine, fully functional

Fully functional welding machine

109 litre, Stock number: D934, Litre: 109, In stock: Yes, Amount in stock: 1 pc., Item: Gas Incubator, Inner dimensions: W 425 x H 520 x D 500 mm, Temperature: 0-55º C, Power: 230 Volt, Shelf: 3 pcs., Manufacturer: Heraeus, Model/type: BB16, Other: Inside copper cladding

Stock number: F653, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Cup filling/closing machine, Piston dosage: 50-550 cm³, Theoretical capacity: 2500-4000 UPH, Filling heads: 2 pcs. - Ø 80, and Ø 91 mm, Double jacket: Product container with double jacket, Lid: 2x2 lid magazine with pressure station, Manufacturer: Gasti, Type: Doga Therm 41S, Other: Cup magazine - Cassette conveyor with 2 formats

109 litre, Stock number: D935, Litre: 109, In stock: Yes, Amount in stock: 1 pc., Item: Gas Incubator, Inner dimensions: W 425 x H 520 x D 500 mm, Temperature: 0-55º C, Power: 0,6 kW - 230 Volt, Shelf: 3 pcs., Manufacturer: Heraeus, Model/type: BB 16 CU, Other: Double glass door and inside copper cladding

weight max. in kg: 5.500 kg Number of working hours: 2739 h weight of the machine ca.: 8,59 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Danstoker Gas boiler 3000 kw Year of manufactory 2016 Weishaubt gas burner Gasstring Pumps and pipes Panelboard All cabels Price is include loading Price 12000 euro Dismantled and ready for loading

Available a complete gas train of DUNGS DN100

Jenbacher 320 Year of manufactory 1999 Running hours total 40265 Running hours after major ouverhaul 265 Condition excellent Scope of delivery Engine and generator on frame Gasstring Charging unit Curkit breaker panel Diana blue panel All communication kabels Batteries Pumps and pipes Full set of documentation Loading on truck include in price Price 43000 euro Extra Exhaurst heat exchanger Ventilation fans Oiltanks and pumps Transformer Switch gear VLT Radiator for intercooler Loading on truck include in price Price 7000 euro Dismantled and ready for loading

Jenbacher 316 Year of manufactory 1996 Running hours total 99800 Running hours after major ouverhaul 20000 Condition good Scope of delivery Engine and generator on frame Gasstring Charging unit Curkit breaker panel EMS 2000 panel All communication kabels Batteries Pumps and pipes Full set of documentation Loading on truck include in price Price 18000 euro Dismantled and ready for loading

Jenbacher 316 Year of manufactory 1997 Running hours total 38867 Running hours after major ouverhaul 38867 Condition good Scope of delivery Engine and generator on frame Gasstring Charging unit Curkit breaker panel Diane blue panel All communication kabels Batteries Pumps and pipes Exhaurst heat exchanger Full set of documentation Loading on truck include in price Price 26000 euro Dismantled and ready for loading

Availale this complete DUNGS DN80 Gas Train ready for Shipping.

Key data: 681 KW, 1500 1/min

Jenbacher 316 Including: - Jenbacher Control (Diana Blue) - Gas line - On-site delivery and/or installation possible at an additional cost.

MIG MAG Welding Machine, Shielded Gas Welding Machine CLOOS Type GLC 357 NMIG MAG Welding Power SourceFabr. No. 576 Year of construction approx. 1985Nominal power 350 Amp.Power 350 Amp. - 80% ED 310Amp. - 100% EDEinfinitely variable adjustment rangeConnecting hose package 4.5 metersMains connection 380 Volt, 50 Hz, 32 Amp. Plug - 2-stroke and 4-stroke welding device - external wire feeder type CK 72 ZK with 2 roller drive and 4.5 meter hose package- 3 meter hose package with central connection and CLOOS hand torch- water-cooled-

MIG MAG welding machine, arc welding machine EWM type MIG 230Fabr. No.: L/0340 Year of construction 1994Power 230 Amp. = 35 % ED 120 Amp. = 100 % EDEsetting range 8 stepsMains connection 400 volts, 50 Hz, 16 Amp. Plug- 2-stroke and 4-stroke welding device- Spot welding device- 2-roll wire feeder- 3 meter hose package with central connection- Welding gas pressure reducerSpace requirement L x W x H 1000 x 450 x 700 mmWeight 70 kgGood condition; used

LPG forklift, gas forklift STILL type RX 70-16TSeries No. 517314G00021 Year of construction 2016Nominal load capacity 1600 kgLifting height 4920 mmFork length 1000 mmCarriage width 980 mmOverall height 2160 mmTotal width 1100 mmTotal length without forks 2200 mmNet weight 3040 kg- Triplex mast with full free lift 1550 mm- Hydraulic sideshift- LPG electric drive- 4-cylinder Volkswagen LPG engine with 30 kW- Hydraulic auxiliary steering- Front working lights- Reversing Warning light (blue)

Impulse Shielded Gas Welding Machine REHM Type RMP 400 Hybrid (REHM Mega Pulse)Pulse Welding Machine with Inverter Welding Power SourceFabr. No. 065013 built in 1998Power 400 Amp. = 60% ED 320 Amp. = 100 % EDEinfinitely variable adjustment rangeMains connection 400 Volt, 50 Hz, 32 Amp. Plug - separate 4-roll wire feeder with connecting hose pack meter - Digital display for voltage and current- Pulse welding device with single and double pulses - 2-stroke and 4-stroke welding device - 4 meter Binzel hose pack with

Key data: 1064 KW, 1500 1/min

Two units JENBACHER JGS 320GS NL available One engine dismantled and can be used for spare parts Capacity 1064 kw 1500 rpm With stamford alternator

Thermo Dionex ICS 5000 ion chromatography system, consisting of Dionex ICS 5000 SP (single pump) Dionex Autosampler AS-AP Dionex VWD (UV Detector) Dionex ICS 5000 TC, Used system

Machine is in good working condition. Parts shown by hand not come.

Machine is in good working condition.

A mint condition gas burner Elco is available. Burner capacity range: 510kW-950kW, gas types: G20/G25/G31, emission class: 3, combustion controller: TCH 5xx, max. gas inlet pressure G20/G25/G31: 300mbar/300mbar/148mbar, operating time: approx. 4 months. Machine dimensions X/Y/Z: approx. 600mm/550mm/1200mm, weight: approx. 90kg. Documentation available. An on-site inspection is possible.

gas turbine Turbomeca MAKILA TI POWER 1 MWe year 2000 hours 6400 Soundproof turbine box,

Machine type: MIG/MAG welding machine Make MERKLE Type RedMIG eco 2800 K complies with the EU Eco-Design Regulation No 2019/1784 Connection voltage 3 x 400 volts Adjustment range 30 – 280 amps Duty cycle 30% ED at 280 amps 60% ED at 210 amps 100% ED at 180 amps Current setting 14 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 4-roller drive DV 26 Fuse 16 Ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 97 kg Age 12 months Condition workshop tested, very good, incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, complete Equipped 1 pair of  ...

1. Equipment Overview Equipment: Siemens SGT-500 Gas Turbine Packages Quantity: Two (2) units available Condition: New Surplus / Zero Operating Hours Manufacturing & Storage: Manufactured in 2007 Never operated – zero operating hours Preserved and stored according to OEM preservation procedures Originally supplied for a cancelled FPSO project Certification: Marine Rated DNV (Det Norske Veritas) Certified 2. Gas Turbine Technical Data Model: Siemens SGT-500 Configuration: Single-shaft industrial gas turbine Fuel: Dual Fuel (Natural Gas / Diesel) Frequency capability: 50 / 60 Hz ISO Power Output (Indicative): Natural Gas: approximately 17.4 MW Diesel: approximately 17.0 MW Performance: Specific Fuel Consumption: Natural Gas: 221 g/kWh Diesel: 262 g/kWh Heat Rate: Natural Gas: 11,066 kJ/kWh Diesel: 11,200 kJ/kWh  ...

Dispenser for gastro trays

Key data: 637 KW, 1500 1/min

Natural gas operation Engine block incl. crankshaft, camshaft, pistons, connecting rods, wheel drive, vibration damper, turbocharger console

The Heracles system (Alpha M.O.S.) consists of Heracles II unit 230 V MXT5/MXT1701 columns, LHS2 Autosampler, electronic H2 leak detector, AlphaSoft V14 & AroChemBase V 4.1 software package, desktop computer with AlphaSoft installed. From the Heracles E-Nose data sheet: Heracles is an electronic nose based on dual flash gas chromatography technology dedicated to smell and aroma analysis. It can also be used with an autosampler. The system is composed of: - A dual fast GC electronic nose unit (hardware) to detect and analyze the volatile compounds in the sample - A computer for system monitoring, data acquisition and processing with AlphaSoft software - In some configurations: an autosampler for automated sample handling and injection” The system is defective. The VICI valve is probably defective and needs to be replaced. An offer for this is available.

Recon Part Number: 350517 Cylinders 11-20 J 420 A-Version Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 349183 BR 4 A version Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

GAS TURBINE CENTRAX PACKAGE OR ONLY CORE YEAR 1990 HOURS 40 000 PRICE LOADED IN FRANCE

The plant was shut down in 2024 and has 19,900 hours of use. It has been operating at around 19-21 MW/h LM2500 plant, including dismantling and logistics management, with immediate delivery. The plant was shut down in 2024 and has 19,900 hours of use. It has been operating at around 19-21 MW/h Power Output: 22 MW 25,759 KVA x 0.80 (50 Hz) 11,000v (It can be adapted to 60 Hz) Working Hours: 19.900 Number of starts: 215 Last Start: Jun 2024 Control Panel: Woodward Micronet and Bently Nevada Auxiliary Systems: Included Available documentation: work history, MTU review, single-line diagrams, manuals, periodic inspections. Complete control room with Woodward Micronet control units, Bentley Nevada vibration monitoring, ABB protection relays, and Siemens HMI. Gearbox and alternator -- ABB 50/60 Hz, 11,000V Filter box and enclosure.

Rated voltage: 12 kV, length: 4430 mm, height: 1700 mm, including documentation. An on-site inspection is possible.

196 MW ABB Gas Turbine Power Plant consisting of four (4) gas turbine generator units complete with Balance of Plant. The equipment is owned by the seller and is currently installed in the United States. Equipment Summary Manufacturer: ABB Models: GT11C / GT11D Quantity: Four (4) Gas Turbine Generator Units Total Installed Capacity: 196 MW 3 × ABB GT11C – 48 MW each 1 × ABB GT11D – 52 MW Generator Frequency: 60 Hz Generator Voltage: 13.8 kV Speed: 3,600 RPM Air-cooled generators with brushless excitation Complete Balance of Plant included Single GSU transformer included Operating History The units have been operated in peaking service with relatively low fired hours: Unit 1 – GT11C, 48 MW – 829 Starts / 3,595 Fired Hours Unit 2 – GT11C, 48 MW – 788 Starts / 3,496 Fired Hours Unit 3 – GT11C, 48 MW – 875 Starts / 4,420 Fired ...

Jenbacher J320 Shortblock En excelente estado. Nuevos cojinetes principales y cojinetes de bielas Camisas de cilindros, pistones y árbol de levas incluidos Opción de incluir culatas y componentes adicionales según la preferencia del comprador Listo para montaje y uso. Fotos adjuntas. ¡Contacta para más detalles! Cogeneración Técnica Energética ctenergetica.com +34 674945249