129,254 used machines on RESALE, but how to find them? Machine Search
Endress + Hauser Promah H 300 5H3B50-L162/0 ser nr. RC088519000 PROFINET DN50
Promag 50 50H50-10W1/0 DN50 stock: 1629 Promag 50 50H50-10W1/0 DN50 stock: 1621 Promag 50 50H50-4L13/101 DN50 stock :1622 Promag 50 50H50-72V3/125 DN50 stock:1630-1 SOLD All I-out (HART), F-out All tested and in good working condition!
x-travel: 3000 mm y-travel: 2500 mm z-travel: 1150 mm Control: 840 D Powerline tool taper: HSK-A63 table-size: 3000 x 2500 mm turning speeds: 16000 U/min total power requirement: 60 kW weight of the machine ca.: 50 t dimensions of the machine ca.: m - 5-Axis-Fräsmachine - max. rpm: 16.000 - X-Way: 3000 mm - Y-Weg: 2500 mm - Z-Way: 1150 mm - A-Axis: +/- : 100 mm - C-Axis: +/- : 181,5 mm - Tabelsize: 3000 mm x 2500 mm - option: Blowing air outside - kinematics: Clevis The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
COTTON SPINNING SMALL OPEN END LINE – YOC – 2007 Composition: 1. Cotton Blow room – 1 set ( capacity 500-800 kgs/h cotton), composed of: - Blendomat – 36 m rails for 36 bales, 2 rollers bale plucker - Staend.Br – condenser - SP-EM – metal separator - CL-C3 - Cleanomat ( fine cleamer) - MX-1-10 – multimixer - SP-DX - Dustex 2. Flat cards model TC-03 - 3 sets ( 60-90 kgs/h /each)- with: - DFK chute feeds - 3 liker in ; 12 stat.flats front and 6 st.flats back - IDF – autolevellers - Automatic can changer – cans dia 1000x1200 mm 3. Drawing frames TD -03 - 2 sets ( prod. Speed 600-800 m/min) - Creel for 8 slivers/cans - Cans delivery – 450 x1000 mm 4. Rotor spinning machines AUTOCORO 360 of 168 rotors /each – 2 sets - Delivery – 6” cylindrical ( waxing) - Rotors – type BD ( cotton) ( S556-BD & G536-BD on second machine) - Combers – B 174 ...
Level limit switch, level measuring device, sensor, switch, level transmitter -Type: Nivotester FTL325N-F1E1 -Number: 6x available -Price: per piece -Weight: 140 g
Level measuring device, sensor, switch, level transmitter -Fill level transmitter -Manufacturer: Endress-Hauser -Type: FTL20-012B -Number: 1x level transmitter available -Price: per piece -Weight: 0.4 kg
Transmitter -Manufacturer: Endress Hauser -Type: FTC 282 -Number: 2x devices available -Price: per piece -Dimensions: 60/170/H135 mm -Weight: 1.1 kg
Pressure transducer -Type: PMP131-A3101A1X -U: 12...30 VDC -Weight 0.5 kg
Check valve, non-return valve -Type: GS011 -Connection: DN100 -Nominal pressure: PN16 -Total length: 18 mm -Passage: 70 mm -Valve cover material: Stainless steel -Number: 1x valve available -Price: per piece -Weight: 2.5 kg
Suitable for Yanmar VIO 75 mini excavator/Nabtesco, model MSP 00 2609
Manufacturer: RASOMA Type of Machine : End Milling Machine Year of Manufacture: 2018 Total Weight: 16,000 kg Voltage: 3x400V, 50Hz Control Voltage: 24V DC, 230V AC Rated Current: 92 A Maximum Fuse: 125 A Power Rating: 62 kW Find more here - / Contact us at -
Evaporator Guntner -Type: S-GHN 080.2H/212-END50.E -Cooling capacity: 61.5 kW at DT8, 49.3 kW at DT7 -Fin spinning: 12 mm -Fans: 2 x 800 mm -Dimensions: 3970 x 1120 x 1400 mm -Electric defrost -Refrigerant: Freon -Volume: 115 L -Weight: 518 kg -Quantity in stock: 1 -Reference number: CH 588 -Condition: Used in good condition, evaporator 100% tight under nitrogen, fans working, ready to work
used flow meter, from plant dismantling, DN 40,
The scope of delivery includes: 01x End Stand Riser, used Shelving system: Bito Type:PRO Material color:sendz. galvanized Frame profile: P5 Profile dimensions: 120 x 76 x 2.25 mm Pitch holes: 50|50 mm Height: 500 mm + extension tab Depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
A walk-in CNC 5-axis large-format portal milling machine Fooke is available. Travel X/Y/Z: 3000mm/2500mm/1150mm, bridge height: 800mm, table dimensions X/Y: 3000mm/2500mm, spindle power: 28kW, spindle speed: 16000rpm, swivel range A: +/-100°, rotary range C: +/-181.5°, feed rate: 15m/min, rapid traverse X/Y: 20m/min, rapid traverse Z: 10m/min, rotary speed A/C: 8rpm, tool holder: HSK-63A. Machine dimensions X/Y/Z: approx. 6000mm/6000mm/5200mm, weight: approx. 50000kg, control: Siemens 840D powerline. Documentation available. On-site inspection is possible.
All items are sold on condition `as is and where is`. Ex work from current location excluding de-installation, de-hook up, discharge, packaging, crating and delivery. We are not responsible for any damage incurred during shipment.
Used Used end Canning Line 2019: Year: 2019 Condition: Good Used end Canning Line 2019: Year: 2019 For cans Speed: 720 packs/hour Type: with tray Case Packer: Number of heads: 1 Pick per head: maximum 3 Head type: magnetic Carton Closer Knecht Model: d-100 Speed: 12 pack/min Operation: automatic (refilling of the carton magazin is manuel) Closure type: hot melt glue If hot melt glue: Robatech Palletizer Ecoma / Kawasaki Model: 200900-25 maximum Packing height: 180 cm Layer pad placing system No pallet wrapper General Information: Layout: o Lunghezza: 4100 mm o Larghezza: 3100 mm o Altezza: 3100 mm Safety protections Code: NP 686 More details: https://bottlingscout.com
Reference : C14241 ATEX flowmeter from the brand ENDRESS HAUSER model PROLINE t-mass 65. Technical characteristics Model PROLINE T-MASS 65 Equipment Setup ATEX Documentation No documentation Status In your state Manufactured by ENDRESS+HAUSER
ATEX flowmeter from the brand ENDRESS HAUSER model PROLINE t-mass 65. Technical characteristics Model PROLINE T-MASS 65 Equipment Setup ATEX Documentation No documentation Status In your state Manufactured by ENDRESS+HAUSER
Endoline SPT case erector and taper 2017, Endoline 102 Case erector inline with Endoline SPT Case taper with top and bottom tape heads and side grip belts, with spare belts and boxes of tape, mobile, 1Ph
2x pieces of Unused Endress+Hauser PMP75 Pressure Transmitters., Order code: PMP75-3EX77/0, MWP 0.1/10 bar, p -1 ...10 bar, Mat. 1.4435/316L, Will be sold as a set only., Type of Machine: Pressure Transmitter
Unused Endress+Hauser Smartec CLD18 Conductivity measuring system., Order code: CLD18-1457/0, Firmware version: 02.00.09, Measuring range: 200uS/cm - 1.000 mS/cm, Temperature: -10 ... 110°C, Pressure: 13 bar, Type of Machine: Conductivity measuring system
Controller, Ecograph, Alpha-Log, Data Recorder, Recorder, Color Hybrid Recorder -Endress Hauser: Alpha-Log color hybrid recorder with accessories -Recorder: Type RSA10-31B1T -Isolation amplifier: RN 221 -Modbus: RS 485 -Thermometer: TST 10 -Pressure transmitter: PMC 133 -Individual components: see photos -Price/handover: complete -Transport dimension: 500/500/H200 mm -Weight: 11 kg
Wastewater neutralisation The system comprises: - Neutralisation tank with agitator - Final control tank - Lye tank - Acid tank - Pumps - Valves - Measurement, sensor and control technology (level measurement, pH measurement, flow measurement) - Control cabinet, Additional title: Waste water treatment plant, Capacity: 8 m3/h, Operation / Control: Control cabinet with touch-screen display / WAGO, Features: Neutralisation vessel (37 hl); final control vessel (4,5 hl); caustic vessel; acid vessel; pumps; process measurement, instrumentation and control technology; control cabinet
max. workpiece diameter:29 mm min. workpiece diameter:26 mm workpiece length:66 mm the system was originally delivered for the following workpiece sizes: diameter 26mm - 29mm length 65mm - 66mm Changing parts in the clamping device, handling, etc. would probably result in diameters of up to approx. Ø50mm Total length will probably be almost 400 mm possible with a few conversions. Also dependent on tool lengths, machining lengths on the component, etc. Workpiece: Piston pin Drawing number: WHT 000 718, WHT 000 718 A Workpiece dimensions (Ø, WxH): Ø26 x 66; Ø29 x 65 Length: 66 or 65 mm Material: 17Cr3 Quantity: xxx parts / year Cycle time: 5 sec. However, workpiece lengths up to 600mm are manageable. The machining diameter can be adjusted if the appropriate tools are available. The clamping station can currently only accommodate this product. However, this can be adapted by changing th ...
; Gross weight [kg]: 532; Engine: Caterpillar C1.5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 55
; Gross weight [kg]: 706; Engine: Caterpillar C2.2; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 55
; Gross weight [kg]: 608; Engine: Caterpillar C2.2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 66
Key data: 240 KW, 300 kVA, 400 V
MODEL: EQ-P300240 GENERATOR ENGINE: Perkins 1506A-E88TAG5 FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 300(kVA) / 240(kW) ENGINE POWER: 240(kW) CYLINDERS: 6 CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 2150kg DIMENSIONS L/W/HEIGHT (MM): 310010001700 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please se ...
Key data: 200 KW, 250 kVA, 400 V
MODEL: EQ-D250200 ENGINE: Deutz BF6M1015C-LA G1A FREQUENCY (HZ): 50 VOLTAGE (V): 400 MAXIMUM POWER: 250(kVA) / 200(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 3300kg DIMENSIONS L/W/HEIGHT (MM): 380012502000 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inqui ...
Key data: 250 KW, 313 kVA, 400 V
MODEL: EQ-D313250 ENGINE: Deutz BF6M1015C-LA G3A FREQUENCY (HZ): 50 VOLTAGE (V): 400 MAXIMUM POWER: 313(kVA) / 250(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 3500kg DIMENSIONS L/W/HEIGHT (MM): 380012502000 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inqui ...
Key data: 400 KW, 500 kVA, 400 V
MODEL: EQ-D500400 ENGINE: Deutz BF8M1015CP-LA G2 FREQUENCY (HZ): 50 VOLTAGE (V): 400 MAXIMUM POWER: 500(kVA) / 400(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 5000kg DIMENSIONS L/W/HEIGHT (MM): 460017002300 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inqui ...
3516 Diesel Generator Set Just 1032 WORKING HOURS!
; Power [PS]: 54; Gross weight [kg]: 889; Engine: Caterpillar C3.3; Accessories: Tanker, Battery, Control Panel, Stahldach, Caterpillar DE50GC Generator Set specifically designed for stand-by duty.; Water Tank Volume [l]: 103
SUMAB is currently offering a horizontal steam generator. Technical details: Capacity 1500 kg/h, allows you to produce steam in a short period of time. Pre-installed accessories are ready to run. A two part platform for easy assembly on site. Includes: water softening device, condensate tank, cavitation preventing pump, by-pass group with float trap, all fittings and piping connections.
Type: Engine, Type number: 12V71 7123-7305 GENERATOR 438KVA
Type: Engine, Type number: QST30-G2 GENERATOR 937,5KVA
; Power [PS]: 1822; Gross weight [kg]: 10293; Engine: Cummins KTA50-GS8; Accessories: Battery, Control Panel, Cummins C1675 D5A, Cummins KTA50G, , Incl. Coolant Heater and Battery Charger
; Gross weight [kg]: 4832; Engine: Caterpillar C15; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 910
; Gross weight [kg]: 5033; Engine: Caterpillar C15; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 842
This brand new machine is part of Caterpillars rebuild program, Ask us for more information., , Available in 50Hz - 400V , Prime rating 1.500 kVA, Standby rating 1.600, , Controls: EMCP4.2 / ADEM 3; Power [PS]: 1740; Gross weight [kg]: 14000; Engine: Caterpillar 3512B; Accessories: Battery, Control Panel
; Gross weight [kg]: 2016; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 349
; Gross weight [kg]: 3100; Engine: Deutz TCD6.1L6-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Sockets: (400V) 63A, 32A, 16A, Sockets: (230V) 2x 16A; Water Tank Volume [l]: 1100
; Power [PS]: 24; Gross weight [kg]: 757; Engine: X2.5-G2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 55
; Power [PS]: 41; Gross weight [kg]: 842; Engine: X3.3-G1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 55
; Gross weight [kg]: 5245; Engine: Volvo TAD1382GE-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1000
; Gross weight [kg]: 2960; Engine: Deutz TCD4.1L4; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1100
; Gross weight [kg]: 3254; Engine: Cummins 6LTAA9.5-G1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 525
maximum number of results exceeded
please refine your search
