generator 200 kva used for sale

Pneumatic cylinder FESTO DNC-100-200-PPV-A 163472 stroke: 200 mm Rod diameter: Ø 35 mm pmax: 12 bar used ! Dimensions: 580 x 115 x 160 mm

Pneumatic cylinder JOUCOMATIC PES 125 TA 200 RDM 45070772 piston Ø 125 mm stroke 200 mm Rod diameter Ø 32 mm Dimensions: 500 x 220 x 155 mm

Hydraulic Testing Press WALTER + BAI AG 200 kN D-200-D / CSRG-5501 pressure max: 200 kN stroke: max approx. 200 mm (at the moment limited by measuring probe and limit switch) largest height: 400 mm table: 340 x 340 mm 380 V Dimensions: 1300 x 840 x 2050 mm

Motorroller ITOH DENKI Power Moller PM 570 AS - 15 - 200 - 3 - 200 - NR 630 A Diameter: Ø 63 mm Length: 200 mm New ! Dimensions: 260 x 70 x 70 mm

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Straightening Plate, Straightening Table, Spotting Plate PAGUS Work surface: 200 x 200 mm Height: 80 mm used, tested ! Dimensions: 390 x 200 x 100 mm

Drill, High Frequency Tool, High Frequency Machines BOSCH 0 602 118 001 0.36 / 0.42 KW 200 / 265 V 150 / 200 Hz connection cable approx. 3.5 m used, tested ! Dimensions: 450 x 300 x 90 mm

Drilling machine, high-frequency tool, high-frequency machines BOSCH 0 602 102 001 0.16 / 0.2 KW 2300 / 3300 rpm / 200 / 265 V 150 / 200 Hz connection cable approx. 2.8 m used, tested ! Dimensions: 350 x 200 x 70 mm

3-jaw chuck, three-jaw chuck ROTO RECORD DHAP 200 TGL 30 2334 outer Ø: 200 mm bolt circle Ø: 175 mm bore Ø: 54 mm height with jaws: 120 mm max. 3200 rpm split jaws ! Dimensions: 200 x 200 x 120 mm

Including transport trollet Auction-ID: A1-48746-88

Plot has been tested for operation Auction-ID: A1-40164-269

Plot has been tested for operation Auction-ID: A1-40164-284

Plot has been tested for operation Auction-ID: A1-40164-282

Plot has been tested for operation Auction-ID: A1-40164-281

Plot has been tested for operation Auction-ID: A1-40164-276

Plot has been tested for operation Auction-ID: A1-40164-283

approximately 2000 Allen bolts and 2000 stainless steel body rings Auction-ID: A1-46380-82

Mercedes-Benz C 200 d Estate with automatic transmission. Vehicle data: • Registration date: 11.06.2019 • Mileage: 174,065 km • Fuel: Diesel • Power: 118 kW / 160 hp • Displacement according to vehicle documents: 1,597 cm³ • Emission standard: Euro 6 • Body: station wagon, 5 doors • Seats: 5 • Exterior color: Black • Technical inspection valid until September 2028 Equipment: • Navigation system • Rear view camera • Parking assistant with automatic parking function • Heated front seats • Two vehicle keys Location: Mönchengladbach. Auction-ID: A1-51007-105

Brand: Deutz-Fahr Model: Agrotron 150.6 Profiline Year: 2007 Hours: 7,290.2 hours on the clock Fuel: Diesel Power: approx. 150 hp Transmission: 4WD (4x4) Speed: 40 km/h Suspension foredeck Suspended cabin Front linkage 3-point rear linkage Rear PTO 4 double-acting hydraulic spool valves Front hydraulic line Rear exterior hydraulic controls Multi-function controls in the cab Driver's seat with suspension Front and rear work light Flashing lights Exterior mirrors First owner Original tires, depending on the seller Condition: very good overall condition according to the seller, the papers will be published Auction-ID: A3-46138-35274

Mercedes 200d; road tax free; leather upholstery; skylight electronic; all around new brakes + pipes; and had a major service; account present! Auction-ID: A1-47394-183

Toyota Land Cruiser 100 4.2 TD Automatic Registration date: 02.01.2004 Mileage: 298,813 km 4.2-liter turbodiesel (1HD-FTE) Power: 150 kW / 204 hp Automatic transmission All-wheel drive Engine and gearbox running Dutch vehicle documents available Curb weight: 2,560 kg Permissible total weight: 3,260 kg Towing capacity braked: 3,500 kg Trailer hitch available Automatic climate control Toyota AHC – hydraulic suspension height adjustment (HI/N/LO), function not tested Toyota navigation/multimedia system Roof rails and side running boards Toyota alloy rims with coarse tyres Maintenance/service documents available Large cargo space with partition wall Interior in condition appropriate to age and mileage Bodywork with signs of wear Significant rust and corrosion spots present Corrosion is visible , especially on wheel arches, sills, body edges and t ...

- Mitsubishi Pajero Pinin - Year of manufacture / first registration: 15.07.2004 - Color: Black - Passenger cars, closed - Gasoline - Emission class: Euro 3 - Displacement: 1,999 cm³ - Power: 95 kW - Mileage: approx. 108,999 km according to the speedometer - Manual transmission - All-wheel drive (4x4) - Electric sunroof (working) - Fog lights available - Radio functional - Pininfarina version - Leather interior - Roof rails available - 2 vehicle keys available - Service booklet available - Interior well-maintained with signs of wear and tear typical of age - Headlights in good condition - Paint has faded a bit due to age - No major dents found - Alloy wheels with 215/65 R16 98S tyres - Rust on both sills - Rust and blistering on the front wheel arches - Rust on the rear wheel arches - Wheel arches that have already been reworked (visually defective) - Rust on th ...

approximately 2000 Allen bolts and 2000 stainless steel body rings Auction-ID: A1-46381-454

CNC lathe HEYLIGENSTAEDT HEYNUMAT 21U x 2000 Robust horizontal CNC lathe, manufactured by Heyligenstaedt & Comp. GmbH in Giessen, Germany. A 2-axis machine equipped with a FANUC 0T series control , suitable for medium and large-scale turning operations. Technical data Manufacturer Heyligenstaedt & Comp. GmbH Córdoba Heynumat 21U x 2000 Year of manufacture 1981 Machine type Horizontal CNC lathe, 2 axes Nominal working length 2.000 mm Turnable/swing diameter Approx. 719mm Maximum spindle speed 2.240 rpm Spindle power Approx. 55,9 kW / 75 hp Bar capacity Approx. 76mm tool tower 12 positions CNC control FANUC 0T series Source Giessen, Germany Availability In stock The photographs show auxiliary equipment and tooling associated with the machine, including the KNOLL Filtron 300S-2 filtration system . Auction-ID: A1-51153-4

Model: Atego 1218 Version shown: 1218 L / 11.9 Genre: truck Bodywork: converted van / horse transport 1st registration: 09/11/2007 Fuel: Diesel Displacement: 4,250 cc Power: 130 kW, or about 177 hp Number of axles: 2 Drive axles: 1 Suspension: Pneumatic Number of seats: 1 + 1 (2 seats) Empty weight / tare weight: 7,210 kg MAW: 11,990 kg Indicated payload: 4,705 kg Mileage at check: 354,624 km Belgian registration: 1-RVH-467 Documents: Belgian registration certificate + certificate of conformity present Technical inspection: carried out in June 2026 and valid until 02/06/2027 Condition at technical inspection: compliant, with several minor failures reported, including corrosion of the chassis/superstructure and some bodywork/cab elements. Possibility of doing the cellar part - possibility of making it a mobile home Equipped with a latest-generat ...

Simon RPNA2 leek top lifting harvester – automatic box filling – 2005 – incl. Simon RPNA 2007 donor machine Specifications: Brand: Machines Simon Model: RPNA2 Year of construction: 2005 Version: 1-row top lifting harvester Processing: automatic box/palox filling Drive Functions: Hydraulic Weight: approx. 1,300 kg (indicative, not weighted) Plucking belts: approx. 40% Support pools: approx. 50% Reading table: replaced around 2016 Features: Automatic box filling First model of brush torpedoes Blade cutting with 2 smooth blades Leaf polisher above the brush torpedoes Hydraulically driven polisher under the picking belts Anti-slip on the drive pulleys Imitation support pulleys Tires on rim Road lighting Particularities: Including second machine: Machines Simon RPNA, year of construction 2007, serial number 24427. The second machine is intended for part ...

Auction-ID: A1-50377-243

230/400V, PTO drive, 3-point connection Auction-ID: A1-50597-131

Automatic transfer panel for three-phase 250kVA generators, Maximum power connection rating: 250 kVA, Generator monitoring connection: Three-phase connector, Frequency: 50/60 Hz, Maximum current: 550 A, Maximum voltage: 1000V. Auction-ID: A1-50595-21

Generator set Champion DualFuel 2000 (operation with gasoline & gas possible), stable / avg. Output voltage (V): 230, stable / avg. Output power (W): 1600 (1440 in gas mode), Maximum output power (W): 2000 (1800 in gas operation), DC DC output: 12V-8.3A,Output : 2x Schuko socket (230V), 1x 12V DC (8.3A charging current), Generator type: Mobile digital inverter,Engine type: 1 cylinder, 4-stroke, Champion OHV engine (192 cc), Fuel: Normal gasoline / E10 or propane gas,Fuel / oil tank capacity (L): 4.2 / 0.4,Runtime (25% load) of up to 11 hours (petrol operation), 29 hours (propane operation with 11kg), Noise level: 53 dB(A)/7m – no-load Auction-ID: A1-50853-7

Inverter (TSW-Technology) Type: Single-phase, continuous power 1600W, Connections: 1 x Schuko socket (230V), 1 x 12V DC (8.3 A charging current), 1 x USB (5V, 1.5A), Motor: 4-stroke OHV, 1 cylinder, weight 21kg; Auction-ID: A1-50853-10

- Thermal power 46.50 KW - 40000 kcal/h. - Consumption 3.92 kg/h. - Airflow 1800 m³/h. - Fuel: diesel. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-33

Endress diesel generator set with Deutz engine (defective / in need of repair) • Generator set: Endress Power Generators • Design: Soundproofed diesel generator set / stationary generator • Year of construction: 2008 • Operating hours: 74 h • Engine manufacturer: Deutz AG • Engine type: BF 4M 1013 EC • Engine power: 102 kW / 137 hp • Rated speed: 1,500 rpm • Engine number: 10676428 • Exhaust/engine identifier: D20C102 • Fuel: Diesel • Cooling: Liquid-cooled • Control: Electronic generator control GC M02-C • Design: Closed, soundproofed steel housing Equipment / Construction: • Deutz 4-cylinder diesel engine • Generator integrated • Electronic control and monitoring panel • Engine Protection • Emergency stop switch • Main switch / power protection • Refrigeration system with cooler • Starter and alternator • Fuel a ...

Year & Manufacturer: 2008 – WORMS / Robin Power: 2.6 kW at 3000 rpm Working parameters: 50 Hz, 230 V single-phase, 11.3 A, power factor 1, rated speed 3000 rpm, application class G1 Compliance: CE marking, sound level Lwa 96 dB Power supply: Robin 6.0 EX17 petrol engine Remarks: Serial number not legible on the plate. Pre-owned condition with traces of use visible in the photos. Auction-ID: A1-50671-5

Viewing by appointment Unused Auction-ID: A1-51065-62

According to the specification, it was stopped flawlessly about 12 months ago at 114 hours. Equipped with lifting eyes Auction-ID: A1-50864-24

Unused in the original packaging Compact and reliable inverter unit from JCB Continuous power of 1800 watts Maximum power of 2000 watts Suitable for construction, automotive and professional use Ideal for garages, workshops and mobile service Suitable for sensitive electronic equipment Reliable pull start 5.5 litre fuel tank Run time up to 8.5 hours at 50% load Clear and uncluttered LCD display European 230V socket 12V DC output USB-A and USB-C connection Suitable as a compact emergency power generator Low net weight of only 16 kg Compact and easy to transport Auction-ID: A1-40407-77

Nitrogen generators membrane or PSA systems for laboratory up to production (500 L/h to several m3/h) No more gas cylinders in laboratory, plant or car repair shop (tyre gas)! Wear-free operation >99.5% pure nitrogen from mostly existing in-house compressed air Constant and safe gas generation guarantees reliable analytical results Operation-free 24-hour operation also in hazardous areas Safe operation due to low operating pressures Economically thanks to fast payback even on a technical scale! N2 production according to the membrane process The nitrogen generators continuously supply nitrogen up to a maximum purity of 99.5%. After the compressed air flows through highly effective filters, the compressed air is decomposed in a hollow fiber membrane module into a concentrated nitrogen flow and an oxygen-enriched portion. The membrane process has the great a ...

Petrol generator set with AVR technology (automatic voltage regulator) 3.200 W, petrol, 2x 220 V 16 A, start type: mechanical, engine CC: 224.0, 6.9 hp, fuel tank in litres: 18.0, running time at 25 % power: 12 hours; portable generator Auction-ID: A1-50853-4

Soundproof diesel generator set Power Generator PG6500DS. Operates in three-phase 230/380 V – 50 Hz. Rated power of 6.0 kW and maximum power of 6.5 kW. Engine speed of 3,000 rpm, power factor 1.0. Weight: 165 kg. Equipped with keyed electric starter, voltmeter, circuit breaker, 220 V AC sockets and 12 V DC (8.3 A) output. The unit shows normal signs of use (scratches, dust and dirt) but the set seems complete. Sold in the condition visible in the photos. Rated power: 6.0 kW Maximum power: 6.5 kW Voltage: 230/380 V Current: 20 A Frequency: 50 Hz Motor speed: 3000 rpm Power Factor: 1.0 Phase: Three Phase Weight: 165 kg DC output: 12 V / 8.3 A Auction-ID: A3-46138-39130

Only the fluid tube and flange radiator assembly with integrated control cabinet (steam generator) will be auctioned. All other devices shown in the pictures are not up for auction. Auction-ID: A1-51071-30

Compact carrying case One 230V 13AMP output, one 12V DC 8AMP output and one integrated USB output with parallel sockets Impact resistant PP & PA Spark plug Single cylinder, 4-stroke, OHV, air-cooled USB Charging Facility 5V DC 1.5amp ECO mode save fuel consumption Auction-ID: A1-40900-176

Hyundai Gasoline Generator – Model HY2500i Compact and portable Hyundai aggregate with blue housing and two sockets. Suitable for mobile power supply on construction sites, in workshops and in emergency situations. Brand: Hyundai Peak power: approx. 2,500 watts Rated power: approx. 2,000 watts Voltage: 230 V Frequency: 60 Hz according to the rating plate Weight: approx. 28 kg 2 pieces Hyundai gasoline generator - model HY3200C Robust Hyundai gasoline generator with open tubular frame, suitable for construction sites, workshops and mobile power supply. Brand: Hyundai Model: HY3200C (55017) Rated power: 3.0 kVA Maximum power: 3.2 kVA Voltage: 230 V Frequency: 50 Hz Fuel tank: 10 litres Oil capacity: 600 ml Weight: 27 kg Noise level: 96 dB LwA Powertech PT2000 Gasoline Generator Compact and lightweight petrol generator, suitable for mobile power supply at the campsite, in the workshop o ...

2x Hager HG1200 petrol generators – unused stock goods Technical data per device: ✓ Manufacturer: Hager ✓ Model: HG1200 ✓ Year of construction: 2023 ✓ Gasoline generator ✓ Voltage: 230 V ✓ Continuous power: 700 W ✓ Mobile and compact design Condition: ✓ Unused stock goods ✓ Several identical devices available ✓ You will receive 2 identical devices from our stock ✓ Photos serve as sample/reference images ✓ Serial numbers may vary ✓ Minimal bearing-related traces or deviations possible Scope of delivery: ✓ 2x Hager HG1200 power generator ✓ 2x user manual ✓ Tools and accessories according to illustrations Note: ✓ The Hager HG1200 is also offered individually in a separate auction . Auction-ID: A1-50373-80863

Hager HG1200 petrol generator – unused stock Technical data: ✓ Model: Hager HG1200 ✓ Year of construction: 2023 ✓ Gasoline generator ✓ Voltage: 230 V ✓ Continuous power: 700 W ✓ Mobile and compact design Condition: ✓ Unused stock goods ✓ Several identical devices available ✓ You will receive an identical device from our stock ✓ Photos serve as sample/reference images ✓ Serial numbers may vary ✓ Minimal bearing-related traces or deviations possible Scope of delivery: ✓ 1x Hager HG1200 power generator ✓ 1x user manual ✓ Tools and accessories according to illustrations Note: ✓ In another auction, we are also offering the Hager HG1200 as a pack of 2 . Auction-ID: A1-50373-8086

Technical data: Table load: 20 to. Table length: 2,000mm Table width: 2,000mm Table height: 930mm Table shift: 1,500mm Total power: 8.1 kW

manual roll gap adjustment 2x7.5 kW motor Bearing Oil circulation lubrication adjustable roller speed 10-41 rpm BJ 1990

Roller die line consisting of:- 1 x Troester 200mm pin barrel extruder Type QSM200K-16D power roller feed, 10 rows of 8 pins, L/D ratio 16:1 Serial no. 1816/88, year 1988, With temperature regulation unit, 282kW ASEA DC variable speed motor mounted on rails (moves away from calender to clean out etc) Hydraulic sheeting head linked directly to:- 1 x Adamson 24in dia x 68in wide two roll calender, peripherally drilled rolls cross axis, bush type bearings, motorised nip adjustment with unidrive gearbox 277kW ASEA DC variable speed motor Hydraulic clamping device for extruder Set of 4 x cooling drums Dual wind up and liner applicator Chalking Unit Siemens PLC control. Complete line in excellent condition. PRICE: On request.

technical data: Make: AEG Type: AM 200 L4 Connection: 380 V / 57 A kW: 30 kW rpm: 1470

Ladies and gentlemen, we may, on the basis of our general terms and conditions of delivery and payment for the trade in used machinery and equipment, offer you the following: Ladies and gentlemen, Offer: 1 piece br. Aluminium continuous casting plant, Make: SMS 3200 tons Price: € net, on request from the location. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection i ...

Cat. No. 06-1101-8 new with lid-round standing on feet from V2A – 2,000 litres top quality for the favorable price, the best high-grade steel to German Institute for Standardization welds minimally, stable feet standard equipment: material V2A, 1.4301 according to. German Institute for Standardization 17440, inside 3IIId=2B – outside marbles completely pickled, passiviert and neutralises rest outlet DN 50 level indicator with strip and scale swimming lid completely with accessories air-bleed valve and bleed valve air pump transport hooks for lid on / from state feet volume: 2,000 litres Diameter: 1,310 mm Cyl. Height: 1,500 mm Total Height: 2,165 mm feet: 3 surcharges upon request For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, exc ...