generator 200 kva used for sale

PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-200 Technical features Output: up to 200 cans/minute Recommended output: 150 to 180 cans/minute (according the can type) Format: diameter 83,7 mm Cans height: 25-62 mm

Height=2.08 m, Overall length= 2.05 m, Overall width= 1.35 m, Net weight= 1278 kg,

Net weight= 1260 kg,

Height=1.86 m, Overall length= 1.9 m, Overall width= 2.3 m, Net weight= 1272 kg,

Manual length adjustment via handwheel with digital display For mounting on any Elumatec single-head saw (left) Max. feed length: 3,000 mm Pneumatic Locking Brake

UVP HL-2000 Hybridization Incubator Temperature range: From ambient temperature +10°C to 99.9°C Hybridization furnace Model: HL-2000 HybriLinker 2 independent devices in 1 Membrane fixation by 254nm UV irradiation and hybridization Stainless steel interior Door with glass window protecting from ß emissions For long tubes. 300mm max The rotating wheel can hold up to twenty 35 x 150 mm bottles and ten 35 x 300 mm bottles at a time Membrane drawer with UV-resistant viewing window In excellent condition Tested at 37°C

LEICA DM 2000 Microscope (DM2000) - 3 Objectives Model: DM2000 Binocular Head Adjustable eyepieces HC PLAN s 10x/22 3 objectives: Plane 10x/0.22 Infinity / - / B Plane 40x/0.65 Infinity/0.17/D 100x Plan/1.25 Infinite Oil / 0.17 12V Lamp - Max 30W Average condition Power cord

Height=1.7 m, Overall length= 1.65 m, Overall width= 1.85 m, Net weight= 1530 kg,

Two Geiss CNC machining centers are available. 1) Geiss FZ 2000x1000, year of manufacture: 2012, travel path X/Y/Z: 2450mm/1400mm/800mm, B-axis: 285°, C-axis: 520°, speed: 30000rpm, table dimensions X/Y: 2000mm/1000mm, machine dimensions Y/Z: 2500mm/2450mm, weight: approx. 30500kg. 2) Geiss FZ 2800x1000, year of manufacture: 2013, table dimensions X/Y: 2800mm/2000mm, weight: approx. 42000kg. The Geiss machine with the year of manufacture 2013 has spindle problems. A cost estimate is available for this. The repair can be carried out before the sale or by the buyer. Documentation available. An on-site inspection is possible. Individual sale possible.

Ref. no.: 18597 Manufacturer: ENGEL Year of construction: 2007 Clamping unit Clamping force: 70 ton Opening stroke: 305 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2381 bar Measurements and weight Dimensions: 4,0 x 1,8 x 2,5 m Machine weight: 5600 kg Further information: The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries. One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced an ...

Year of manufacture: 1994 / overhauled: 2025 Circumferential diameter over bed ... 630mm Turning length ... 2000mm Circumferential diameter via support ... 340mm Main engine power ... 7.5kW L x W x H ... 4000 x 1400 x 1520mm Machine weight ... 2960kg The machine is in very good condition - after the general overhaul. More info on request. It is possible to visit our warehouse in Brno.

Key data: 1 mm, 40 mm

Hebrock Euro 2000 edge banding machine – ready for immediate use Our affordable alternative. For sale is a robust and proven Hebrock Euro 2000 edge banding machine from 1993. The machine has been overhauled and is ready for immediate use. Some components have already been repaired: • Several hoses renewed • Replaced several cylinders Despite its age, the machine delivers a clean and reliable work result – typical of Hebrock's solid construction. Technical data: • Voltage: 400V 50 Hz • Connected load: 11.5 kW • Pneumatic roller capping up to max. 3 mm edge thickness • HF cross-cut saw up to 8mm edge thickness • HF combi milling station • Double belt feed • Foldable side outriggers Ideal for smaller workshops or ambitious hobby users who are looking for a functioning edge banding machine. Feel free to take a look at our other offers! m ...

Key data: 2020 mm, 1600 mm, 350000 mm

Stock number: 4023 LATHE Manufacturer: SKODA, Type: SUT 200 TD x 35000 Machines NO.: ob22780, Year of manufacture: 1984 Specifications: Turning length 35000 mm Turning over transverse slides 1600 mm Ø Gr. turning diameter 2020 mm Max. weight in quill 63000 Kg Spindle Motors Power 2 x 82 kW Total power 2x150 kw kW Accessories: Querschlitte 2 x ( Double ) Universal chuck 2 x 2000 mm mm Ø Rotating bezel 6 Fixed bezel 5 + 2 mm Ø Tailstock 2 x Machine needs be to rebuild - with new control Length: 45,200 mm, Height: 3000, Width: 3500 mm, Weight: 150,000 kg

Inv. Num. : 9065 Type: GLS 200 Producer: GOODWAY Created: 2016 Parameters: Control System: FANUC Series Oi-TF Switch-on hours: 15380 h Hours: 7757 h Max. turning length: 300 mm Grinding diameter: 350 mm Maximum turning diameter over bed: 500 mm Maximum turning diameter over support: 380 mm Maximum spindle speed: 4500 1/min Spindle passage: 65 mm Number of tool head positions: 12 Weight: 3200 kg Equipment: Chuck Tool probe Bar Feeder Grips

Key data: 1 mm, 50 mm

Hebrock TOP 2000 edge banding machine – overhauled, serviced & ready for immediate use – others just push through – we check! For sale is a Hebrock TOP 2000, built in 2003, in well-maintained and technically revised condition. Radius / chamfer pneumatically adjustable. Heated inlet ruler. The machine has been extensively overhauled by us: • Most of the pneumatic hoses renewed • Replaced several pneumatic cylinders → Typical wear parts have already been dealt with and are unlikely to be an issue in the next few years. Safety switch also renewed. In addition, the machine comes from a company where specialist fitters were regularly on site for maintenance – recognisable by the existing maintenance stickers. → This speaks for a continuously maintained technical condition. Technical data: • Voltage: 400V 50 Hz • Power consumption: 6.9 kW • Current  ...

z-travel: 200 mm Clamping diameter of the cutter heads: max. 550 mm Max. permissible cutter head weight: 150 kg Mounting plate diameter for cutter heads: 360 mm Mounting cone for cutter heads Nominal diameter: 500 mm weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2 x 1,5 x 2,03 m Cutter Head Set-Up- and -Measuring Machine In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in dry milling, high gear cutting quality and a long service life can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing devic ...

Description Blumer Atlas 200 Label die-cutter ideal for small labels, banderoles and tax or value coupons from 1992, but very little used with tape feeder SE 18.4 Cross-section device Punching unit ST 18.2 Inline tape machine PB 18.2 and output channel Strip sizes: Length of the tape min. / max. 350 / 1115 mm Width of the tape min. / max. 45 / 215 mm (the smallest dimension is 20 x 44 mm) Label sizes: Pre-cut label size min. 25 x 45 mm Pre-cut label size max. 170 x 215 mm Stack height min. / max. 40 / 120 mm Intermediate bleed 3 – 40 mm Blank 3 �

Description R+S Verpackungstechnik Side sealing machine FAS 700 with shrink tunnel VAST 652 from 2013/2014 1 Minitec conveyor belt built in 2013, L approx. 5,000 mm, W 200 mm, w. sideways Guide rails, 1 conveyor belt R+S TB 2000, built in 2014 SN RS-46010, L 2,000 mm, W 350 mm, base frame height-adjustable, w. lateral. adjustable guide rail, 1 side welder R+S VAS700 built in 2014, SN RS-45943 1 shrink tunnel R+S VAST652 built in 2013 SN RS-47085 1 conveyor belt R+S TB 2000 built in 2014 SN RS-46004 L 2,000mm, W 350 mm, w. 2 sides adjustable guide rails, height-adjustable base frame

General SKU049Z226 MakeGlatt AG Pratteln TypeWST-CD 120/200 No.101015 Year of construction1991 LocationBarneveld Main Features MaterialStainless steel Volume500 Ltr. Specified Features - Fluid bed dryer batch Fluidbeddryer(1x) With pancheck Capacity500 Ltr Pan sizesdia. 1200x550mm, Pan with rotating bowl-mesh Capacity120-300 KG per batch Can be heated by steamcheck Without fancheck With dust filter:Air Handler Unit: MaterialStainless steel 1.4401 (316) General With switchgear(as is) Total height7,5 M Extra Specifications- With product discharge silo - With rotary valve for discharging and dosing - With CIP cleaning unit Technical specs Extra informationPan with rotating bowl-meshPowdered foodsGeneric medicinesStarchBiotechnologyCatalysts & fillersFeed additivesDiscountOther pharmaceuticsCosmeticsFood additivesSugarDairySolid pharmaceuticsDyes & pigmentsBiopharma ...

The Stork Westfalia Menger with a capacity of 200 liters is a versatile and robust device, ideal for applications in the food industry. This mixing machine is excellent for efficiently mixing, cooking, and cooling various ingredients. It is used but in good condition and ready for immediate use. The machine was workshop-overhauled about 5 years ago (new long-term storage, new belts, etc.), since then it has run for only about 10 hours as a test mixer. With its reliable construction and high-quality workmanship, the machine ensures smooth operation and a long service life. The 200-liter capacity allows larger quantities to be processed in a single pass, which can significantly increase efficiency in your production process. The Stork Westfalia Menger 200 liter is characterized by ease of use and maintenance friendliness. It is a cost-effective and powerful solution for operations seeking  ...

swing diameter: 2000 mm turning height: 1800 mm Control: Siemens Sinumerik 840 Dsl turning speeds range: 2,8-315 U/min cross rail adjustment - vertical: 1200 mm cross rail adjustment - horizontal: +/- 1150 mm : 1500 mm bit feeder section: 240 x 240 mm Minimum immersion diameter: 340 mm cutting capacity: 50 kN max. torque on the faceplate: 50000 Nm speed range step 1: 2,8 - 80 U/min speed range step 2: 12 - 315 U/min Max. clamping weight: 12000 Kg power capacity faceplate: 105 kW weight of the machine ca.: 33 t dimensions of the machine ca.: 10 x 5 x 6,5 m Further technical data: - Feed range of three-phase servo motors: 1–3000 mm/min, 0.01–50 mm/rev - Crossbeam travel speed: 425 mm/min Features/Accessories - Increased turning height (+600 mm) - Z-axis extended to 1500 mm - Magazine capacity: 20 positions - Magazine type: disc magazine - Max. tool length: 525 mm - Chi ...

Key data: 75 KW, 80 kVA, 400 V

Viessmann Gas-CHP Vitobloc 200 EM-70/115 Gas power and heat generator from 2013 with unknown operating hours, control with missing parts. 70 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 43.2L8 C 6/4, 80 KVA Manufacturer: Viessmann Model: Vitobloc 200 EM-70/115 Type: Gas CHP Serial Number: 7411148 3 02168 101 Engine: MAN E0836 E302 Power [KW]: 75 Power [KWel]: 70 Year of Make: 2013 Operating hours: unknown Weight unit [kg]: 2,500 Dimensions LxWxH [cm]: 340 x 90 x 180 AC Generator Leroy Somer LSA 43.2L8 C 6/4 Manufacturer: Leroy Somer Model: LSA 43.2L8 C 6/4 Type: AC Synchronous Generator Serial Number: 302845/2 Power [KVA]: 80 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 115 Speed [1/min]: 1,500 Year of Make: 2013

Thermalcycler PTC-200 DNA Engine block 96 well Pcr BIO-RAD Temperature range: approx. -5°C to 105°C Heating/cooling speed: up to 3 °C/s Temperature accuracy: 0.3°C to 90°C Capacity: 96 wells (double block) Dimensions (W x D x H): approx. 30 x 35 x 30 cm Weight: approx. 12 kg Power supply: 100-240 V, 50/60 Hz With Alpha BioRad PTC DNA Engine Systems Thermal Cycler PCR Lab Unit Block (Serial No.: AL057123)

A Happel layer palletizer is available. Products: bags/cartons/bundles/containers/drums, package rotation: 90°/180°/270°, pallet format: 800mm/1200mm, max. pallet height: 1500mm, min. product dimensions X/Y/Z: 150mm/150mm/40mm, max. layer weight: 150kg, max. palletizing capacity: approx. 2500pieces/h. Machine dimensions X/Y/Z: approx. 4000mm/2600mm/2500mm, weight: approx. 2500kg. An on-site inspection is possible.

Boiler lifter Kemper HK 200 for spiral mixer boiler from Kemper SP150AL - Lifting tipper - Manufacturer: Emil Kemper GmbH - Model : HK 200

hogedrukkoeling via de spindel spanentransporteur X-axis: 1660 mm Y-axis: 510 mm Z-axis: 510 mm Table dimensions: 2000 x 510 mm Max weight on the table: 1000 kg Admission in spindle (ISO): BT-40 Power on the spindle: 18,5 kW Control : Mazatrol 640M Toolchanger: yes Number of toolholders: 30 positions Number of rotations: 12 000 rpm Weight: 8250 kg

Spiral mixer extendable Diosna SPV 200 AF/T - Spiral mixer extendable - for max. 200 kg dough bzw. max. 125kg flour - 2 speeds - With digital foil display - Stainless steel spiral - With pliers lock - Boiler is with friction wheel drive - Head hydraulically lifting and lowering

Code: 0359 Brand: MASTERWOOD Model: TEKNOMAT 2000-P - CE Standard Electronic anuba inserting machine with 2 controlled axis for inserting anuba hinges – CE Standard Technical specifications: Working stroke length 3100 mm – Displacement speed 72 mt/min Working stroke height 350 mm – Displacement speed 15 mt/min Working stroke depth 150 mm - Displacement speed 15 mt/min Working table mm 150 x 3800 N° 2 rear stops with manual positioning N° 4 rear bracket-type clamps with reference stops Side stops with manual positioning 1 right - 1 left 2 pneumatic front clamps Anuba unit with double magazine for male female anuba hinges - Diameter 14 mm Tilting head - 7 + 90° Double stem anuba screw device Front fences on machine table for machining of assembled doors and windows Control CNC 2: Microprocessor control unit – Digital display – Multitasking operating syst ...

Offer 26114 Technical data: - Bending process is carried out by hand, supported by counterweight - Clamping of the upper beam via eccentric lever + foot pedal - Max. working width 2040 mm - Max. material thickness St 40 1.00 mm - Bending angle adjustment via end stop 10 - 180 ° - max. stroke upper beam approx. 70 mm - Max. adjustability bending beam 10 mm - Space requirement approx. W 2800 x H 1200 x D 900 mm - Weight approx. 520 kg - various bending rails as shown

Horizontal turning machine manufactured in 2018. This Mazak QUICK TURN 200MA L features a maximum workpiece diameter of Ø 360 mm and a maximum workpiece length of 535 mm. It is equipped with a spindle speed of 5,000 rpm and a turret with 12 VDI positions. If you are looking to get high-quality turning capabilities, consider the Mazak QUICK TURN 200MA L machine we have for sale. Contact us for further details.

Dimensions (L/W/H): 2570x1100x2490 mm Weight: 400 kg Total power requirement: 4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Horizontal turning machine manufactured in 1998. This DMG Mori Seiki CL-200B features an X-axis travel of 398 mm and Z-axis travel of 214 mm. It is equipped with a Renishaw tool setter and a workpiece catcher that has never been used. The machine has approximately 10,000 operating hours and has always been operated in a single-shift environment. If you are looking to get high-quality turning capabilities, consider the DMG Mori Seiki CL-200B machine we have for sale. Contact us for further details.

This 5-axis Mazak INTEGREX J-200 S was manufactured in 2021. It features a maximum machining diameter of 500 mm, X-axis travel of 450 mm, Y-axis travel of 200 mm, and Z-axis travel of 960 mm. The machine is equipped with a 36-tool magazine and a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality mill-turn capabilities, consider the Mazak INTEGREX J-200 S machine we have for sale. Contact us for further details.

The further development of the TBA 19 V10 was initially called V 20. The main changes can be seen at first glance in the control system and the final sealer. Like its predecessor, the system produces 7500 packs per hour in this format and does not differ from the TBA 19 V 10 previously known. The further development of the TBA 19 includes extensive innovations in the control and mechanics of the plant, which can lead to an improvement in efficiency in constant operation. As with all other machines, smooth and efficient operation requires consistent adherence to service intervals. The operator on the systems should be intensively trained and have sufficient experience in operation. This system also undergoes all the necessary tests and inspections before handover. Our customers are invited to this at any time in order to be able to inspect the machine in operation during the acceptance pr ...

This 4-axis NAKAMURA-TOME AS-200L was manufactured in 2017. It features a maximum turning diameter of 320 mm and a turning length of 570 mm. The machine includes a 12-station turret and a main spindle speed of up to 4500 rpm. If you are looking to get high-quality turning capabilities, consider the NAKAMURA-TOME AS-200L horizontal turning machine we have for sale. Contact us for further details.

Industrial robot, with cell phone Model: KR 210-2 2000 Year of construction: 2007

This 3-axis HEDELIUS C60 - 2000 vertical machining centre was manufactured in 2007. It features an impressive X-axis travel of 2000 mm, Y-axis travel of 620 mm, and Z-axis travel of 520 mm. The machine is equipped with a powerful 18.5 kW spindle and a tool magazine capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the HEDELIUS C60 - 2000 machine we have for sale. Contact us for further details.

Key data: 200 t

Horizontal Hydr. Straightening and bending press, 200 tons, hand and foot control, hydraulics. 18kw, with bending tools.

Weinig Unimat 2000 four-sided planer Working width 230mm Working height 160mm Number of spindles 8 Spindle system Down 11kw 12.000r.p.m Right 7.5kw 6000r.p.m Left 11kw 12.000r.p.m Right 7.5kw 12.000r.p.m Mountain 11kw 12.000r.p.m Down 7.5kw 12.000r.p.m Mountain 11kw 12.000r.p.m Down 30kw 6000r.p.m Inverter-adjustable feed speed up to 36m/min 4 drive rollers in the work table Pneumatic Material Clamps Total power of the machine 106kw Year of manufacture 2002

Banding / Banding Machine ATS Tanner Type US 2000 AB With ultrasonic tape welding, suitable for plastic and paper tape with a width of 30 mm. Powerful, proven technology. Strip tension infinitely adjustable via potention meter/rotary regulator. Offer price 3000,- EUR EXW or 3,500 EUR incl. packaging & shipping with transport insurance.

M.T.A.A ARIES TECH 2 105 HE, R410a New model year 2025:, 338 kW effective cooling capacity,, water inlet/outlet 20°/15°C, Ambient temperature +35°C, 4 hermetic scroll compressors and 2 refrigeration circuits, 4 condensers consisting of copper tubes and aluminium fins (NOT micro-channel), Shell-and-tube evaporator, Evaporator anti-freeze heater, -20°C ambient temperature kit option, Electrical panel heater, Brushless EC fans, availability: in stock, capacity: 338 kW cooling capacity, conditions: new machine, type: chilling unit

M.T.A.ARIES G 065 HE - new machine, Green R454b refrigerant, 150.000/200,000 BTU (174 / 232 kW), 198 kW effective output, Water IN/OUT 20°/15°C, Ambient temperature +35°C, Green R454B refrigerant, -- Global Warming Potential (GWP) = 467, which complies well in advance with the new F-Gas Regulation (EU) 2024/573, due to come into force on 1 January 2027 with a GWP ≤750 --, Shell-and-tube evaporator, 500-litre storage tank, P3 pump, Constructor Description:, The Aries G series liquid chillers are air-cooled units designed for outdoor use (electrical control panel protection rating IP54). All units are designed, manufactured and tested in accordance with ISO 9001 standards. The design of this range has focused on achieving full-load and seasonal efficiency ratings that meet the limits imposed by eco-compatible design regulations (ErP Tier 2 Compliant) for SEER and SEPR HT ratings, whil ...

Description DÖRRIES SDE 200 Vertical Lathe Details Type SDE 200 Machine number K240/50662 Year of manufacture 1977 Face Plate 2,000 mm Circulation 2,200 mm Turning height 2,150 mm Max. table load at reduced speed 20 to incl. documentation

Ref. №: 4365 Bin washer Type: NIEROS CL-K 200 D For washing: Eurobins – 200 l. Capacity: up to 40 bins/h depending on pollution Power: 28 kW Voltage: 3 x 400 V, 50Hz Machine dimensions in cm: Width: 170,0 Depth: 160,0 (when lid open 290) Height: 190,0