generator 200 kva used for sale

A Varpe double-track scale including a Loma metal detector is available. Accuracy class: XIII(1), scale division: 1g, readability: 1g, product weight min./max.: 30g/500g, cadence: 103rpm, speed: 0.5m/s. Documentation available. On-site inspection is possible.

roll diameter: 200 mm roll length: 400 mm rolls drilled: Peripher Nip adjustment: hydraulisch total power requirement: 2x 5,5 kW Condition: new rolling mill, with CE marking, with 2 year warranty Specification: Monoblock laboratory rolling mill 200 x 400 mm - new - Roller diameter: 200 mm - Roll length: 400 mm - Roll bore: peripherally drilled - Individual drives: variable friction ratio - Roller bearings: roller bearings with manual grease lubrication - Gap adjustment: hydraulic - Gap adjustment: approx. 1 - 20 mm, during normal operation operation - Speed range approx.: 2.5 - 19.5 rpm - New hydraulic unit for roller gap and emergency system emergency system - New Johnson-Fluiten rotary joints - two adjustable guide plates Tecafine PE5 Natural to reduce the working range. - Working range approx.: 100 to 360  ...

Vacuum homogenizing system Make Haagen & Rinau Type Unimix RU IV 200 Net capacity 200lt Stirrer with scraper 1500/300 rpm 3.7/4.4 KW Homogenizer 1500/300 rpm 2.0/2.4 KW Heating by steam double jacket, max 6bar

Key data: 210 mm, 305 mm, 5000 1/min

CNC Lathe Make: Gildemeister Model: CTX 200 Control: Heidenhain Pilot 1190 Year of manufacture 1996 Switch-on hours: approx. 38,000 h Specifications Circumferential diameter over bed 440 mm Circumferential diameter over carriage 210 mm Turning length 305 mm Bar passage 42 mm Speed 5000 rpm Turret 12 stations Tool holder 20 VDI Machine dimensions L x W x H 2800 x 1651 x 1771 mm Machine weight approx. 3000 kg Accessories: Various tool holders Collet chuck on main spindle Tailstock Documentation

Key data: 380 mm, 575 mm, 5000 1/min

Smooth G control Travel X/Y/Z/W 230/100/625/575 mm Main spindle Max. speed 5,000 rpm Main spindle spindle nose A2-6 Sub-spindle Max. speed 6,000 rpm Sub-spindle spindle nose A2-5 16-cavity tool turret, VDI 16 driven tool stations 5.5 kW Max. speed ang. Tools: 5,000 rpm Toolsetter Parts catcher Full C-axis on main and counter spindle Cylinder interpolation Synch. Tapping Preparation Renishaw OMP Conveyor Interface for bar feeder 15 bar high pressure pump

: 0460 mm : 270 mm : 1500 mm : 230 mm : 76 mm : 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MAX DIAM 250 X 2000

Turntable diameter: 1650mm, turntable height: 65mm, mast height: 2560mm, max. load capacity: 2000kg, max. pallet dimensions X/Y/Z: approx. 1200mm/1100mm/2400mm. Machine dimensions X/Y/Z: approx. 2600mm/1650mm/2600mm, weight: approx. 550kg. Documentation available. An on-site inspection is possible.

Size: A3 Equipments: Maximum mechanical speed: 35 cycles/min. Dimensions: 700 x 260 x 30 mm Power specifications: Frequenz: 50 Hz Spannung: 230 V Stromstaerke: 2,5 A

Code: 0379 Brand: BRENNA + ELEPHANT - ITALY Model: GR 200 - CE Standard Manually operated jib crane with cantilever beam - CE Standard Lifting capacity 200 kg Chemical-anchored base Complete with: Electric hoist RWM Mod. W 125 T1 V1 Type F - Capacity 125 kg - Speed 8 mt/min - Motor 0,6 Kw - Rpm 1400 Pneumatic suction lifter ELEPHANT Mod. VLA6F with 6 plates suitable for handling sheet metal and other materials - Capacity 500 kg - Plate dimensions diameter 265 mm - Transverse and longitudinal plate adjustment - Compressed air operation with powerful and quiet vacuum generator - Operating pressure 6-7 bar Overall dimensions for transport mm 4000 x 1100 x 900 h + Pallet mm 2000 x 1300 x 600 h

Souffleuse - machine d'extrusion soufflage BEKUM BA 200 Tête D'accumulation de 8 l 1 tete et 1 station Matériau transformé: PE Capacité de production: 500 kg / h Type d'extrudeuse: Accumulator Rsbpmev Hpnre If Hisu Nombre d'extrudeuse : 1 Diamètre de la vis : 120 mm Rapport L/D: 24 Contrôle de l' épaisseur: oui alimentation matière Course d'ouverture : 710 mm Force de serrage : 800 KN

Pressing tool, clamping pad, square profile, support profile, square block -Square block: with through holes -Bore: Ø 78 mm -Number: 4x profile available -Price: per piece -Dimensions: 300/200/80 mm -Weight: 27.9 kg/pc.

pressure: 25 t throat: 200 mm stroke: 8 - 80 mm no. of strokes: 180 Hub/min distance table/ram: 330 mm table surface area: 550 x 400 mm hole in the table: 60 mm table height over floor: 800 mm table height over floor: 800 mm passage to the back: 200 mm ram surface: 355 x 220 mm ram adjustment: 50 mm power capacity: 2,5 kW total power requirement: kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 1,2 x 1,8 x 2,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ram capacity: 2000 t return capacity: 150 t table-size: 1015 x 1050 mm ram head dimension: 975 x 1050 mm dist. between pillars (left to right): 975 mm dayligth: 1000 mm distance table/ram: 600 - 1000 mm ram stroke: 400 mm table height over floor: 800 mm height over floor: 3650 mm Table ejector: 63 KN Ram ejector: 650 KN Table ejector stroke: 100 mm Ram ejector stroke: 100 mm Lenght of ram slide guiding: 1400 mm : Idle speed downward: 235 mm/s working feed: max. 20 mm/sec Working speed at 10000 KN: 14 mm/s Working speed at 20000 KN: 5 mm/s Idle speed upward: 250 mm/s overtravel time: 220 ms safety distance: 352 mm total power requirement: 194 kW weight of the machine ca.: 105 t dimensions of the machine ca.: ca. 5,00 x 6,50 x 8,00 m Technical data without engagement: sizing press with oil-hydraulic drive, hydr. and electrical control depending on UVV, light barrier (Comp. Sick), ejector ...

"The machine is in good technical condition, a test run is possible by prior arrangement."

Offer 25200 Specifications: - Pressure capacity 200 t - Working width 3100 mm - Passage between the uprights 2600 mm - Table width 180 mm - Projection 300 mm - Installation height 450 mm - Feed speed 80 mm/sec. - Working speed 9 mm/sec. - Retraction speed 60 mm/sec. - Ram stroke 120 mm - Adjustment range fixed stops 120 mm - Drive 400 V / 18.7 kW - Space requirement approx. W 3300 x H 2950 x D 1900 mm - Weight approx. 10500 kg - with: - Adjustment of the crimping depth + baling pressure -Mot. Backgauge with handwheel fine adjustment - 4-fold universal die - sharpening tool - Two-hand control panel, foot switch,

Key data: 6000 mm, 2200 mm, 2000 mm

CNC Guideway Grinding Machine Waldrich Coburg Way Grind 2000AC Year of construction 2013 Siemens 840D controller Table width 2,000 mm Grinding width 2,200 mm Distance between stand covers 2,200 mm Grinding height 2,000 mm Grinding length 6,000 mm Table longitudinal travel 6,825 mm Table load 8,000 kg/m Total table load max. 20,000 kg Max. grinding height: Universal grinding head 2,000 mm Circumferential grinding head 1,925 mm Table speed 1.1 - 1.2 m/min. - max. 10-14 m/min. Positioning accuracy +/- 1 mm Circumferential grinding head: Max. drive power 50 kW Spindle speeds 500 - 1100 rpm Grinding wheel dimensions: Diameter (max.) 600 mm Width 150 mm Inner diameter 150 mm Universal grinding head Drive power (max). 22 kW Spindle speeds 500 - 2500 rpm. Grinding wheel dimensions: Diameter (max.) 600 mm Width 100 mm Inner diameter 250 mm Gri ...

current intensivity: 200 A capacity at 100% load: 150 A : 230 V : kVA weight of the machine ca.: 9,0 t dimensions of the machine ca.: 0,46 x 0,15 x 0,32 m TIG welding system - New - 3m hose package - Additional 8m hose package - Ground cable - Gas connection hose - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Controls:FANUC 30iA WORKING RANGE -ROBOT-:. - capacity:170 kg - Reach:1520 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:800 kg

Controls:FANUC 30iA WORKING RANGE -ROBOT-:. - capacity:170 kg - Reach:1520 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:800 kg

Controls:KUKA KRC 2 WORKING RANGE -ROBOT-:. - capacity:150 kg - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1285 kg

High performance ultrasonic banderoling machine, arch size 700 X 750 mm, 30 mm band wideness. The US-2000 AST-MDM enables high perfomance. With the dynamic high-speed band feeding and the withdrawal by a brushless motor, the machine processes up to 30 bandings/min. Thanks to the packet height detection, the product memory and the band cen- tering, the banding happens very gentle and on the exact position. Postal packages can thus be banded very tight and without dama- ging the edges. The AST aggregate operates wear-free. Checked and serviced.

power capacity:110 kW feed pressure:10 bar Number of working hours:11 372 / Lastst. 7436 h volume capacity:16,75 m³/min total power requirement:110 kW weight of the machine ca.:2,3 t dimensions of the machine ca.:2400 x 1630 x1820 mm

High performance ultrasonic banderoling machine, arch size 700 X 750 mm, 30 mm band wideness. The US-2000 AST-MDM enables high perfomance. With the dynamic high-speed band feeding and the withdrawal by a brushless motor, the machine processes up to 30 bandings/min. Thanks to the packet height detection, the product memory and the band cen- tering, the banding happens very gentle and on the exact position. Postal packages can thus be banded very tight and without dama- ging the edges. The AST aggregate operates wear-free. Checked and serviced.

Cast iron bed Length: 2300 mm Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Weight: approx 3 T

grinding length:600 mm grinding width:200 mm total power requirement:5 kW weight of the machine ca.:1,4 t dimensions of the machine ca.:3 x 3 m

pressure:250 t distance between columns:1110 mm stroke:250 mm Distance table/ram, max. stroke up, adjustment up:500 mm Table surface area:1100 x 900 mm Table height above floor:950 mm Side window:690 mm Ram surface:1100 x 900 mm Oil volume:730 l Power capacity:56,0 kW Dimensions (WxDxH):2,3 x 1,55 x 3,96 m

material width:350 mm coil weight:2,0 t coil internal diameter:470 - 530 mm coil external diameter:1500 mm power requirement:1,0 kW weight:1,5 t dimensions (WxDxH):1,3 x 1,6 x 1,9 m

An unused explosion-proof three-phase motor WEG is available. Power: 37kW, voltage: 380V-415V/660V/460V, frequency: 50Hz, number of poles: 2, size: 200M/L, degree of protection: IP56, explosion protection: Ex eb, zone: 1, group: IIB, temperature class: T4 (135°C), cooling type: TEFC (surface-cooled with closed fan), insulation class: E, temperature class: G, operating mode: S1. Documentation available. On-site inspection is possible.

GENERAL CHARACTERISTICS:, Grinding Wheel Dimensions: Ø610xØ304,8x300 mm, Regulating Wheel Dimensions: Ø355xØ152,4x300 mm

GENERAL CHARACTERISTICS:, Grinding Wheel Dimensions: Ø610xØ304,8x300 mm, Regulating Wheel Dimensions: Ø355xØ152,4x300 mm

Offered as a package deal: GS-24 PLUS 200 and GS-24 PLUS SPM machines included. Machine 1 (Has two individual sealing units arranged one behind the other) Model: GPPL-GS-24-Plus-200 Year of Manufacture: 2020 The machine set is capable of producing various pouch types, including: - Three Side Seal Pouches (with/without zipper) - Stand-up Pouches (with/without zipper) - Both Side Gusset Pouches - Shape Pouches (via attachment) - Bottom Film Synchronization & Laminate Roll Conversions Applicable Films - Heat-sealable laminated films: - PET poly, PET MET poly, PET ALU foil poly, paper poly, multi-layer films (e.g., PA/PE) Production Range - Output: Up to 200 shots/min or 35 meters/min - Actual output depends on pouch size, repeat length, and laminate type Product Size Range - Three Side Seal Pouch: - 100–600 mm (W) x 100–400 mm (L), 1–2 line operations - Stand-up Pouch: - Si ...

TECHNICAL INFORMATION:, Grinding wheel dimensions (od x id x width): Ø508xØ304.8x204 mm, Dimensions of the regulating grinding wheel (od x id x width): Ø304,8xØ152.4x204 mm, Main motor power: 20 Kw, Voltage: 380 V, Height: 1700 mm, Length: 2000 mm, Width: 1080 mm, Weight: 4315Kg approx. machine and 60 Kg box

bore capacity in steel (diameter): 55 mm arm length: 2005 mm workpiece height max.: 1500 mm table-size: 1500 x 800 mm spindle taper MT: 5 spindle turning speed range: 30-1200 U/min feed range: 0,06 - 1,0 mm/U crossrail adjustment horizontal: 495 - 2.000 mm crossrail adjustment vertical: 505 - 1670 mm spindle stroke: 310 mm column diameter: 360 mm distance spindle/base plate: 825 - 1670 mm power requirement: 4,4 kW voltage: 400 V total power requirement: 7,2 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3,00 x 0,80 x 2,80 m - Pole-changing motor with 2 speeds - right / left rotation - machine light - Cube table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FOR SALE – AMADA PROMECAM HYDRAULIC PRESS BRAKE Model: ITPS – Length 2000 mm – Force 50 Tons With DELEM DA-65R numerical control ⚙️ TECHNICAL FEATURES: Brand: AMADA PROMECAM Model: ITPS Folding length: 2000 mm Maximum force: 500 kN (i.e. 50 tons) Maximum stroke: 105 mm CNC : DELEM DA-65R Date of manufacture: 03/02/1999 Voltage: 380 V / 50 Hz – Tri Current rating: 125 A Installed power: 11 kW Machine weight: 3450 kg Condition: Good working condition Comes with complete bending tools Photos available: General condition, numerical control, nameplate. Asking price: 12.500 € HT] ✅ Truck-mounted loading capability ✅ Ready-to-work machine

Offer 25221 Specifications: - Load capacity 2000 kg - Projection approx. 3000 mm - Swivel radius approx. 180 ° - 2 lifting speeds approx. 3.0 + 0.75 m/min - Hackenweg approx. 3000 mm - Operation of the chain hoist via hand remote switch - Manual swivelling of the boom + trolley movement - Boom IPE 300 - Overall height with swivel arm carrier approx. 1220 mm - Connection 400 V - Weight approx. 500 kg - Test book

Pinacho SC 200 Ø 402 x 1000 mm Distance between centers: 1000 mm Swing over bed: 402 mm Swing over cross-slide: 380 mm Swing in gap: 560 mm Diametre of main spindle bore: 42 mm Power on main spindle: 4 kW Number of speeds: 40 > 2800 rpm Digital screen: yes Length: 2390 mm Width : 910 mm Height: 1625 mm Weight: 1190 kg

A dismantled Autefa compensating stacker is available. Working width: 3000mm, working speed: 60m/min. On-site inspection is possible.

In-line homogenizer with high shear force Manufacturer BWS Technologie GmbH Type S 200 Material parts in contact with the product 1.4462 Double-acting mechanical seal Motor explosion-proof Output 22 kW, liter output max. 10,000 l/h Suitable for dispersing, emulsifying and homogenizing

Anleger - CMC Einsteckmaschine - Feeder - CMC Inserting machine RITMICA Universal H-200 Year 1992 - Serial-No. H-200 2 Feeder for CMC Inserting Machine

The scope of delivery includes: 01x Shelf connectors, used Manufacturer: Schäfer Type: PR600 Material colour: RAL 5010 blue Total length: approx. 280 mm Shelf spacing: approx. 200 mm L-profile: approx. 40 x 40 x 3 mm Weight: 0.400 kg | Pcs. 02x Screws M8 x 20 mm 02x Nuts M8 04x Washer M8 Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Continuous leaching system with double lye curtain with heating Cloth feed via Velcro fastener Placement on baking tray 60/80 without salter Speed adjustable Output approx. 400 sheets per hour

Birth Smoking Machine Specifications: Table size600 x 320 mm Borehole depth205 mm Drill hole length250 mm Height adjustment165 mm Engine speed 2840 rpm Weight180 kg

SANDRETTO series 8 790-200 SEF 90 Clamping force: 200 T Distance between tie rods: 510 x 510 mm Min / max mold thickness: 210 - 630 mm Opening stroke: 550 mm Injectable volume: 546 cm3 Material pressure: 1450 bars Screw diameter: 55 mm Weight: 9000kg Dimensions: 7.26 x 2.30 x 1.58 m Euromap 12 robot interface (CHAVERIAT A.111.24.PM - CH 2002 from 07/1998 as an option possible)

SCA Air Driven Piston Pump Max. Temp. 100 °C Material pressure 350 bar More items - new and used - can be found in our shop! International shipping costs on request!

Two Linde high-pressure tanks are available for the storage of hydrogen (GH2/GHe). Diameter: 2000mm, height: approx. 10600mm, wall thickness: 100mm, usable volume: 21.9m³/3600Nm³, max. operating pressure: 200bar, medium weight hydrogen/helium: 305kg/465kg, empty weight: 45000kg. Documentation available. On-site inspection is possible.

Engel victory 200/50 spex (2010) CC200 Clamping force: 50 t Screw diameter: 35 mm Type: Horizontal Drive: Hydraulic Hours: 56000

This COMAU C4G NH4 – 200 robot arm was manufactured in 2004. It is part of a set of 4 refurbished industrial robots, fully serviced and in excellent working condition. These units have been mechanically and electronically overhauled, ensuring reliable performance. Ideal for automation, assembly, or handling applications. Contact us for more information about this machine.