generator 200 kva used for sale

Electric motor, three-phase motor -Volt: 415 V. -Power: 0.063/0.4 kW -Speed: 460/2840 rpm -Shaft: Ø 17 x 35 mm -Construction: B14 -Protection class: IP 65 -Dimensions: 330/220/H170 mm -Weight: 9 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Passage: Ø 55 mm -Weight: 12 kg

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Passage: Ø 54 mm -with: base plate -Weight: 26 kg

Silo 2 m³ volume, payload 3.2 to, dead weight 690 kg Dimensions 1200 x 1600 mm, height 2200 / 2980 mm Spout height 1100 mm Outlet NW 250 Inspection/filling lid in silo roof NW 500 Silo butterfly valve

Three-phase motor, electric motor -Power: 30 kW -Speed: 2945 rpm -Protection class: IP 55 -Construction: B5 -Shaft: Ø 55 mm -Number: 1x available (1x without fan cover and fan disc) -Price: per piece -Dimensions: 760/400/H500 mm -Weight: 237 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 500 x 200 mm -4x T slots: 14 mm -Clamping angle: rotatable, swiveling, tiltable -Foot recording: mm -Dimensions: 500/300/H210 mm -Weight: 50.5 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 0.75 kW -Speed: 3000 rpm -Max. grinding wheels: Ø 200 x 32 mm -Operating voltage: 380 volts -Dimensions: 540/280/H1230 mm -Weight: 116 kg

Center height: 300 mm Center width: 2000 mm Circumferential Ø: over bed 620 mm Spindle bore: 83 mm Spindle mount: size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 14 - 1000 rpm Feeds: longitudinal/flat 0.086-4.842/0.04-2.258 mm/rev Thread pitches: 0.5 - 28 mm Electrical connection: 380/400 V, 15 kW Space requirement: 3600 x 1200 x 1350 mm Weight: 3400 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Transfer in current condition as seen -Speed: 112/224 rpm -Power: 0.5/0.7 kW -Construction: B3 -Diameter shaft: Ø 24 mm -Protection class: IP 54 -Dimensions: 400/220/H205 mm -Weight: 23 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 200 mm -Passage: Ø 50 mm -one set: hard interchangeable jaws -Weight: 15 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 200 mm -hard: interchangeable jaws -Base plate for: machine table -Passage: Ø 54 mm -Weight: 22 kg

Operating mode: fully automatic/inline or manual Belt Feeding/Insertion: Automatic Band width: 5 mm Output: approx. 36 p/min Option: With Parcel Press and Parcel Stopper Transport speed table belts: Infinitely adjustable Technical documentation: fully available Odometer reading: approx. 50,000 strapping

Three-jaw chuck, three-jaw lathe chuck -without: interchangeable jaws -Mouth size: Ø 200 mm -Recess: Ø 162 mm -Bolt circle: 3 x 180 mm -Passage: Ø 52 mm -Weight: 13 kg

Dear Ladies and Gentlemen, We have the following Oil Transformers in stock Description: Type : Oil Transformer Finish : Hermetic Make :P AUWELS Year of construction : 2001 Condition : Used Inspected Rated power : 2000 KVA Medium voltage : 20 KV + 4 x 2.5 % Low voltage : 400 V Groupset : Dyn 5 Frequency : 50 Hz Dimension Length 205 cm Width 114 cm Height 205 cm Weight 5290 KG Other powers and voltages also available from 100 KVA to 5000 kva. All transformers are tested and ready for use and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery . Available for further questions Mon to Sat 8 a.m. to 10 p.m.

Three-jaw chuck, 3-jaw chuck -Type: DHB 200x3x5 TGL 30 2332 -Mouth size: Ø 200 mm -Passage: Ø 54 mm -max.: 3000 rpm -Short taper mount: Ø 105 mm -Weight: 24 kg

Offer 24194 Specifications: - Max. working width 2040 mm - Max. material thickness 2 mm - Bending angle approx. 0 - 135 ° - Bending angle lockable with end stop - Upper beam is operated with side hand crank - Max. stroke upper beam 85 mm - Max. adjustment bending beam 80 mm - Bending process is supported by eccentric weight - Space requirement approx. W 3250 x H 1250 x D 450 mm - Weight approx. 1620 kg

Clamping angle for workpiece clamping -Dimensions: 200/320/H220 mm -Thickness: 25 mm -Groove: 20 mm -Surface: milled -Weight: 22.7 kg

Workbench, work table, assembly bench -Width: 2000 mm -Depth: 950 mm -Height: 875 mm -Number: 1x drawers -with storage space for a tool trolley -Weight: 108 kg

Type of mixer Height 1700 mm Width 1300 mm Length 3500 mm Capacity 2000 l Power supply: 400V 50Hz 3N Total power 18 kW Main Material Stainless steel, acid-resistant Agitator Type Vane Agitators Product ejection Pneumatic bottom flaps, product ejection from below Loading No loading, it is possible to buy a pillar loading for the machine Mixer Type Open Mixer Number of rollers Twin shaft

Electric motor, three-phase motor -Volt: 415 V. -Power: 0.063/0.4 kW -Speed: 460/2840 rpm -Shaft: Ø 17 x 35 mm -Construction: B14 -Protection class: IP 65 -Price: per piece -Number: 3x available -Dimensions: 395/210/H190 mm -Weight: 7 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Piston: Ø 50 mm stroke: 200 mm -Piston rod: Ø 20 mm -Quantity: 1x available --Dimensions: 65/65/H580 mm -Weight: 4.2 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 200 mm -Piston diameter: 80 mm -Piston rod: 22 mm -Total length: 445 mm -Total length extended: 645 mm -Price: per piece -Number: 2x available -Dimensions: 96/96/H445 mm -Weight: 6.6 kg

MINOX E-Tumbler Screening Machine --> New Machine from Customer Order for Illustration: -2-decker, screening in 3 fractions -2x ball knock cleaning -Lifting device -Safety clamping screws -Sieves of your choice; Fabric : areas in contact with the product in stainless steel 1.4301 (Aisi 304) 2-deck machine : 2.6m² / deck Drive : 4 KW

Folding machine good condition, ready for immediate use. For details, please refer to the nameplate

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 200 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -End position damping: adjustable on both sides -Dimensions: 54/54/H400 mm -Weight: 2.2 kg

Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 200 mm -Piston: Ø 50 mm -Piston rod: Ø 20 mm -Dimensions: 65/65/H450 mm -Weight: 3 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 200 mm -Piston diameter: 50 mm -piston rod: 16 mm (connection M16 x 1.5 thread) -Total length: 383 mm -Total length extended: 583 mm -Price: per piece -Number: 1x available -Weight: 1.35 kg

Stop, depth stop, length stop for miter saw, pull saw... -Receiver: Bosch profile -Length Unit of measurement: 2000 mm -Price: complete -Dimensions: 2215/100/H1000 mm -Weight: 10 kg

geared motor, electric motor -Speed: 40.5 rpm -Power: 0.55 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Dimensions: 445/230/H210 mm -Weight: 26 kg

Gear motor, electric motor, three-phase motor -Speed: 19.5/78 rpm -Power: 0.1/0.4 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Dimensions: 410/220/H210 mm -Weight: 21.9 kg

table length: 4000 mm table width: 2000 mm : 28 mm table height: 815 mm : kg weight of the machine ca.: 1,3 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Ribbed underside for reinforcement. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used fully automatic labeling machine made by KHS Innoket model SE 2000. New 2007. Wet and hot glue labeling capability. Automatic film roll change at each RF station; automatic paper label magazines. Machine speed for RF (hot glue) - max 45,000 butts/hour. Machine speed for paper labels - max 45,000 butts/hr. Machine equipped with 2 stations for paper labels, 2 stations for film labels; 40 plates.

Gear motor, electric motor -Speed: 20.5 rpm -Power: 0.37kw -Type: B5 -Diameter shaft: Ø 30 mm -Protection class: IP 65 -Number: 1x motors available -Price per piece -Dimensions: 500/230/H220 mm -Weight: 31kg

WEINGARTEN DE 200-20 press built in 1975 in Germany is used for precision workpiece machining. The rigid construction combined with a high press force of 200 tonnes make the machine the perfect solution for mass production of various types of parts. The process of precision sheet metal pressing can be fully automated when the WEINGARTEN press is retrofitted with a sheet metal feeder. Technical specifications of the WEINGARTEN DE200-20 200 t press - press force: 200 t - maximum slider stroke: 200 mm - minimum slider stroke: 15 mm - maximum number of slider strokes: 60/min - minimum number of slider strokes: 20/min - slider adjustment: 110 mm

clamping force: 200 kN injection volume: 80 cm³ screw diameter: -- mm platen size: 350 x 300 mm Condition: used, Specification: C-frame injection moulding machine for TPV - second-hand clamping unit: - Clamping unit: vertical - Tonnage: 20 t - clamping force: 200 kN - Heating platen size: 350 x 300 mm Injection unit: - Injection volume max.: 80 cm³ - Connected load: 3x 400 V, 50 Hz - Pump output: 11 kW - Total output: 44 kW Dimensions L/W/H approx.: 2,000 x 1,500 x 2,500 mm Space requirement approx: 5 m² Weight approx.: 3.200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock number: 3919 CNC LATHE Manufacturer: MAZAK, Type: HQR 200 MSY Year of manufacture: 2018 Specifications: Max. circumferential diameter 344 mm dia. Turning length 860 mm Main motor power 22 kw Main spindle speed range 5000 rpm Hole through drawing tube 65 mm dia. C Axles 0.001 Both spindles Y axis upper 100mm / lower 70mm mm Tool turret 1 with 12 stations Tool turret 2 with 12 stations Powered tools. 6000 Both Turrets rpm Control Mazak Smooth Fabr. Accessories: Collet device. Heinbuch 65 both spindles Hydr. Chuck main spindle 210 mm dia Hydr. Chuck Subspindle 210 mm dia Driving angle tools 6 pieces Driving Tools Straight 5 pcs. Tool setter Charging Hydrafeed X-Tract Delivery time September 2024 Length: 4000 mm, Height: 2500 mm, Width: 2700 mm, Weight: 12500 kg

Gear motor, electric motor -Speed: 65 rpm -Power: 0.55 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Number: 1x geared motors available -Price: per piece -Weight: 31 kg

Key data: 350 mm, 500 mm

Stock number: 3920 CNC LATHE Manufacturer: Mazak , Type: Quick Turn Smart 200 Year of Make: 2012 Specifications: Max. circumferential diameter 350 mm dia. Max. turn. About Bed 660 mm Dia. Turning length 500 mm Main motor power 15 kw Spindle bore 65 mm dia. X axis movement 195 mm Z ash movement 560 mm Tool turret with 12 stations Controlled in 2 Axes Accessories: Hydraulic Main Centering Chuck 200 mm dia. Various tool holders. Cooling water system. Hydraulic tailstock. Length: 2700mm, Height: , Width: 1680mm, Weight: 4410 kg

Hand lever scissors, hand tin snips, tin snips, sheet metal snips -Hand lever shears -Material thickness: max. 2 mm -Blade length: 200 mm -Dimensions: 790/540/H1715 mm -Weight: 28 kg

PKC/ 2000 Steam peeler for vegetables with steam buffer used, sold as it is, where it is, price ex location

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25/13 mm -Drawing with the pictures -Total length: 200 mm -Total height: 188 mm -Weight: 6 kg

Gear motor, electric motor -Speed: 30.5 rpm -Power: 0.55 kW -Brake: 440 V -Construction: B5 -Shaft diameter: Ø 30 mm -Protection class: IP 65 -Number: 1x motors available -Price: per piece -Dimensions: 605/250/H215 mm -Weight: 36 kg

Gear motor, electric motor -Speed: 68 rpm -Power: 0.55 kW -Construction: B5 angle -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 400/180/H200 mm -Weight: 21 kg

Frequency converters, frequency converters, converters for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Power: 2.8 kW -Output: 42 V -Frequency: 200 Hz -Dimensions: 1160/600/H720 mm -Weight: 74 kg

Machine vice, vice, drill press vice -Jaw width: 155 mm -Back height: 80 mm Clamping depth: max. 200 mm -Dimensions: mm -Weight: 35 kg

I sell an automatic pneumatic cross-cut saw GreCon Dimter 2004, built in 1992. Entrance table automatic / continuous system Exit table 3 ejectors on the left outlet table. Length: 15.50m Optimization with automatic defect detection and automatic cutting diagram programming. Available the same. Spare parts and documents included.

Wire brush round, round grinding brush, braid round brush, grinding wheel, cup wheel -Inside: Ø 32 mm -Outer: Ø 200 mm -Width: 25 mm -Number: 3x discs available -Price: per piece -Weight: 1 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 51 mm -Outer: Ø 200 mm -Width: 19 mm -Number: 1x discs available -Price: per piece -Weight: 1.2 kg

Height 2300 mm Width 2700 mm Length 2200 mm Weight 5000 kg Power supply: 400V 50Hz 3N Total power 102 kW Main Material Stainless steel, acid-resistant Cutter Type Vacuum Bowl Cutter Cutter bowl made Stainless steel, acid-resistant Bowl capacity 200 l Number of knives on the head 6 pcs. Knife shaft speed 680-5050rpm Bowl speed 4-16 rpm