generating set used for sale

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Top jaws: for power chucks -2 set: soft jaws, aluminum -Hole spacing: 54 mm -Price/sale: only complete -Dimensions: 135/170/H80 mm -Weight: 1.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Top jaws: for power chucks -4 set: soft jaws, aluminum -1 movement: hard jaws -Hole spacing: 54 mm -Price/sale: only complete -Dimensions: 310/390/H110 mm -Weight: 18.7 kg

Setup station, pallet changing system, pallet changer, pallet storage, tool changer chain, chain magazine, tool changing system, tool magazine -Setup station with: Garant ZERO CLAMP G-11886 -Manufacturer no.: 101545300002672 - 21063 1721559 -Dimensions: 400/400/H810 mm -Weight: 232 kg

air-cooled chiller, 3.6KW at Eurovent, coaxial evaporator, 40l tank capacity, internal P3 pump, scroll compressor, machine is perfectly suited for smaller cold water supplies of process applications. Compact design, simple control.

chiller, chiller Emicon RAS 601 S KP, , 60 Kw cooling capacity , 17.7 Kw. Electrical Power, Amp 51 YOC 2018 Refrigerant R290 Weight 1.062 kg.

Access ramp set -Driveway width: 170 mm -Height: 230 mm -Dimensions: 810/290/H270 mm -Weight: 10 kg

The refrigeration system was used by us for 1 year in the rental. The chiller has 2 refrigeration circuits and fan control. the cooling capacity is 240kW at 7/12°C and 35°C ambient temperature. the refrigerant used is R140a

The ENR series are air-cooled chillers for industrial use for outdoor installation. The ENR 038 has axial fans, scroll compressors, condensers with finned aluminum fins and self-cleaning coaxial evaporator for maximum operational safety. Internal pump, tank, fan control. Cooling capacity 37 Kw

Motor Connection Cable Set HÖRMANN 638 267 ( 638267 ) 7.5 m New ! Dimensions: 250 x 250 x 80 mm

Electronic module, digital input SIEMENS SIMATIC S5 ( SIMATICS5 ) 6ES5420-3BA11 Set consists of 3 circuit boards ! Dimensions: 245 x 200 x 60 mm

Thread cutting dies, replacement dies, thread cutting heads with chasers, thread cutting stock, thread cutting machine, pipe thread cutter -various: thread cutting sizes -Price: complete -Weight: 12 kg

max. film width: 355 mm max. speed: 0 /h serial no.: 8518 voltage: 100-240 V frequency: 50-60 Hz weight: 150 kg dimensions of press (L x W x H): Belichter 75 x 85 x 100 cm dimensions of press (L x W x H): RIP 70 x 50 x 70 cm repeating accuracy: +/- 25 µm RIP included up to 3000 dpi Red laser diode max. page width 355 mm max. 200 lpi screen ruling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Filter cartridge, filter cartridge set MAHLE PI4130SMX25 7.768.048.1 New ! Dimensions 270 x 85 x 85 mm

max. film width: 356 mm max. speed: 338 qcm/min Dimensions (L/W/H): 85x75x100 cm repeating accuracy: 25 µm material: Materialvorrat 76 m weight: 162 kg max. exposure length 2000 mm Resolution max. 2400 dpi red laser diode 670-680 nm point sizes 20-35 µm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Filter cartridge, filter cartridge set MAHLE 890044SMX6NBR H 240 RN 6 NBR 0240R005BN3HC 7.631.936.2 New !' Dimensions 260 x 155 x 100 mm

Die set, hand pipe thread cutter, thread cutting machine, pipe thread cutter, pipe thread cutter, cutting head -for pipe size: max. 2 inch -5x Cutting tips: 3/4 1 1 1/4 1 1/2 2 inch -2x Threaded ratchets: Type 111-R/12-R -Price/Sale: complete -Weight: 12.8 kg

Taurus 60 Turbine Generator Set Solar Taurus 60 T7301 Gas Turbine Engine Runnig hour 1165 hour after last Overhaul Output Power 5200 Kw Gearbox Solar Gear Unit 1165 hour after last Overhaul Type: Epicyclic Leroy Somer Generator 50 Hz

Final dimensions, reference standard LEFT FIRE 125 - 400 mm in wooden box Dimensions: 645 x 155 x 55 mm

Die set, hand pipe thread cutter, thread cutting machine, pipe thread cutter, pipe thread cutter, cutting head -for pipe size: max. 1 1/4 inch -4x cutting tips: 1/2 3/4 1 1 1/4 inch -Number: 1 set available - Price: per set -Dimensions: -Weight: 6.6 kg

Universal clamping pad -Execution: Toothed like a staircase. For use in pairs. Individual pads can be used in conjunction with clamps. -Support height: 72 to 240 mm. -Material: Heat-treated steel, painted. -Scope of delivery: 3 sets of different sizes -Weight: 6.2 kg

Chiller ENR160 130KW at 7/12°C, internal P3 pump, internal 390l buffer tank, system is perfectly suited for process applications as it is equipped with a shell-and-tube evaporator and a buffer as well as an internal P3 pump. low GWP refrigerant R454B, winter package, RS485,

Measuring pins set PAGUS 10 - 13 mm 63 pins step: 0.05 mm in wooden support used ! Dimensions: 240 x 150 x 60 mm

Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, quick-change insert -Take shaft: SK60 -2x sleeve: MK1 -2x sleeve: MK2 -2x sleeve: MK3 -2x sleeve: MK4 -2x sleeve: MK5 -Weight: 48 kg

Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, accessories -Execution: -interlocking in a stair-like pattern -for use in pairs -individual documents can be used in conjunction with clamping iron no. 372000 -Support height: 30 to 200 mm -Heated steel: painted -Weight: 6 kg

Chiller made by Linde Self-made for low temperatures, goes down to minus -25 °C, with two refrigeration circuits. With two Bitzer 6G-30.2Y compressors as main compressor and two 2N-7.2Y compressors as subcoolers. Bundle tube heat exchangers, condensers, etc. Compressors have been renewed.

Indicator set TELEMECANIQUE PXVF141 080342 max. 8 bar Indicator set consists of 2 indicators ! New ! Dimensions(single indicator): 75 x 35 x 30 mm Dimensions: 150 x 70 x 30 mm

Indicator set PARKER PXV-F141 80342 max. 8 bar Indicator set consists of 2 indicators ! New ! Dimensions(single indicator): 75 x 35 x 30 mm Dimensions: 150 x 70 x 30 mm

Cutting Clamp Kit, Hand Pipe Thread Cutter, Tapping Machine, Pipe Thread Cutter, Pipe Thread Cutter, Cutting Head -for pipe size: max. 1 1/4 inches -Cutting tips: 7 -Transport case -Weight: 9.8 kg

Chiller Make: SYSTEMAIR Type: SYSCROLL 170 AIR EVO PH Power: 170 kW – cooling and heating Electrical. Power: 77 kW/150A Refrigerant: R410A Weight: 1,385 kg Year of Make: 2014 4 pcs compressor Make: Copeland Scroll Type: ZP182KCE-TFD-455 Volume: 35.1 m³/h Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

Pressure gauge set WIKA 0 - 25 bar KL. 1.0 Ø: 100 mm connector 0.5 inch 4 pieces = 1 set stainless steel ! Dimensions: 210 x 240 x 60 mm

Brake shoe set, wheel brake, brake kit -Brakes: from GSL (German Standard Lift) aerial work platforms - universally applicable: can be used -with: return spring and brake lever -Number: 112 brakes available Price: per piece -Dimensions: 280/200/H110 mm -Weight: 2.2 kg/piece

Falzeinbrennmaschine - Joint-setting machine La Fornigrafica FEM Serial-No. 3 Working with 500 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Pressure gauge set WIKA 0 - 6 bar KL. 1.0 Ø: 100 mm connection 0.5 inch 6 pieces = 1 set stainless steel ! used !

Reamer, twist drill, drill bit, spiral countersink, three-flute, twist drill -Three-edged -Diameter: 28-40 mm -Recording: MK3 -Type: HSS -Quantity: 37 pieces -Sale/Price: only complete set -Weight: 50 kg

NH fuse -Type: HLS 00 -50 A 500 VAC -Price: per package of 3 fuses -12x packages: 3 pieces each -Weight: 0.6 kg per package

Falzeinbrennmaschine - Joint-setting machine Karl Tränklein FEM 608-53-6 Serial-No. 608-53-6 Working with 500 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Spare part, pressure ring set GRACO (WALTHER PILOT) 76106039001 61.8 x 84.7 x 6.2 mm pressure ring set consists of two pressure rings ! New ! Dimensions (set): 85 x 85 x 14 mm

Falzeinbrennmaschine - Joint-setting machine Karl Tränklein FEM 658-58-4 Serial-No. 658-58-4 Working with 500 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Clamping set, flange with clamping cone PAGUS flange: Ø 330 mm shaft: Ø 185 mm New ! Dimensions: 330 x 330 x 100 mm

Gauge block box, gauge blocks, parallel gauge blocks, test pin set, test pins, plug gauge -Manufacturer: Cary, plug gauge test pin set: 3.01 - 3.49 mm -Content / nominal dimensions: see photos -Dimension box: 135/85 / H60 mm -Weight: 0.3 kg

Vertical Clamp Set, Vertical Toggle Clamp WMW A63 TGL 34181 Height under clamping arm: 63 mm Clamping arm length: 125 mm Clamping arm opening angle: max. 105 ° Vertical clamp set consists of 5 vertical clamps ! New !' Dimensions(per clamp): 200 x 60 x 280 mm Dimensions: 300 x 180 x 280 mm

Clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, accessories -Tensioning tool: clamping bracket, various designs -Norm: according to TGL30- -Bores: Ø 14/20/22/24/26 mm -Thread sizes: M10 / M16 / M20 -Dimensions: Individual part pictures with dimensions can be sent -Price / fee: complete -Weight: 32 kg

Tool holder, milling holder, milling tool, adapter, clamping unit -Milling tool: Milling adapter ring set -Various sizes: see photos, more pictures can be sent -Dimension box .: 280/180 / H80 mm -Weight: 3.3 kg

Thread cutting dies, replacement thread cutting dies, thread cutting head with Strehler dies, thread cutting die, thread cutting machine, pipe thread cutter -Manufacturer: Ridgid, Thread cutting die set, unused, original packaging -Type: 3/4 BSPT -Number: 2 sets available -Price: per set -Weight: 0.1 kg/set

Push rod tensioner, push rod tensioner set DE-STA-CO Model 607 607 - M stroke: 41 mm Push rod tensioner set consists of 2 push rod tensioners ! New ! Dimensions: 160 x 110 x 85 mm

Corner Pipe Wrench Set VBW 1 1/2 and 1 No. 951 and No. 115 DIN 5234 Chrome Vanadium Steel New ! Dimensions: 440 x 80 x 25 mm

Threading dies, replacement dies, threading head with chaser dies, threading stock, threading machine, pipe thread cutter -Manufacturer: Ridgid, thread dies set unused original packaging -Type: 1/2 BSPT -Number: 2 sets available -Price: per set -Weight: 0.1kg/set

Wheel Shoe INA 2 x RUS 19069 KS ( 2xRUS19069KS ) GR3 136773-0/973 Dimensions (single shoe): 70 x 27 x 19 mm Set consists of two roller shoes ! New ! Dimensions(packaging): 110 x 85 x 45 mm

Cutting Wheel Set RIDGID E-1032 Diameter: 38.6 mm Cutting Depth: 11 mm Cutting Wheel Set consists of 6 cutting wheels ! New ! Dimensions(Packaging): 80 x 60 x 45 mm

Clamping jaws for round samples -Manufacturer: VAS, Clamping jaws for round samples, 4 pieces -Type: 15-30 mm -Dimensions: see photo technical drawing -Case dimensions: 270/230/H80 mm -Weight: 6.2 kg