generating set used for sale

Coin set Moldova 2003 1 - 50 Bani st + 10 Lei Wine holidays pp, total 10.91 Lei

Reduction Ratio: 4.4 Lubrication: FUCHS Plantogear 220S Oil Maximum torque capacity: 90 Nm Max speed: 6000 rpm Lifespan: 10,000 h Weight: approx. 23 kg Material: Aluminum outer housing Compatibility: NetGain Hyper9 engine interface and Renault Twingo cardan shaft Additional information: New product from an electrical conversion project Auction-ID: A1-45524-1

KMS Federal Republic of Germany 1975D 1976F 1977 G 1978 F st 43.52 DM

Reduction Ratio: 4.4 Lubrication: FUCHS Plantogear 220S Oil Maximum torque capacity: 90 Nm Max speed: 6000 rpm Lifespan: 10,000 h Weight: approx. 23 kg Material: Aluminum outer housing Compatibility: NetGain Hyper9 engine interface and Renault Twingo cardan shaft Additional information: New product from an electrical conversion project Auction-ID: A1-45524-13

Included: Case Auction-ID: A1-45495-278

Functions: Fully automatic 8-stage charging system including regeneration mode (Recond) for deeply discharged batteries and special SUPPLY mode as power supply. Auction-ID: A1-45495-235

Reduction Ratio: 4.4 Lubrication: FUCHS Plantogear 220S Oil Maximum torque capacity: 90 Nm Max speed: 6000 rpm Lifespan: 10,000 h Weight: approx. 23 kg Material: Aluminum outer housing Compatibility: NetGain Hyper9 engine interface and Renault Twingo cardan shaft Additional information: New product from an electrical conversion project Auction-ID: A1-45524-3

Unaudited Auction-ID: A7-45427-240

Unaudited Good condition Auction-ID: A7-45427-148

Reduction Ratio: 4.4 Lubrication: FUCHS Plantogear 220S Oil Maximum torque capacity: 90 Nm Max speed: 6000 rpm Lifespan: 10,000 h Weight: approx. 23 kg Material: Aluminum outer housing Compatibility: NetGain Hyper9 engine interface and Renault Twingo cardan shaft Additional information: New product from an electrical conversion project Auction-ID: A1-45524-2

REMS Bracket No.22 R 1/4\" - 1\" Thread Cutter Thread Cutting Head Auction-ID: A7-45427-227

Included: Case without instruction manual Auction-ID: A1-45495-277

Reduction Ratio: 4.4 Lubrication: FUCHS Plantogear 220S Oil Maximum torque capacity: 90 Nm Max speed: 6000 rpm Lifespan: 10,000 h Weight: approx. 23 kg Material: Aluminum outer housing Compatibility: NetGain Hyper9 engine interface and Renault Twingo cardan shaft Additional information: New product from an electrical conversion project Auction-ID: A1-45524-6

Included: 2 x cases and accessories Auction-ID: A1-45495-279

Cart Box Nuts up to 50mm see pictures Condition: never used / new (5) Auction-ID: A1-45681-911

Reduction Ratio: 4.4 Lubrication: FUCHS Plantogear 220S Oil Maximum torque capacity: 90 Nm Max speed: 6000 rpm Lifespan: 10,000 h Weight: approx. 23 kg Material: Aluminum outer housing Compatibility: NetGain Hyper9 engine interface and Renault Twingo cardan shaft Additional information: New product from an electrical conversion project Auction-ID: A1-45524-5

Auction-ID: A1-45411-569

With contents, dimensions: 193x330x65cm (HxWxD) Auction-ID: A1-45411-172

New in original packaging Unused The McGee Energy HD is a complete audiophile solution. It consists of two high-quality active monitors in an elegant high-gloss finish and a separate control unit (preamplifier) that centrally manages all connections. Special highlights: • Sound: Powerful, detailed sound thanks to perfectly tuned internal amplifiers (Active Speakers). • Versatility: The compact black control unit offers digital and analogue inputs for TV, PC, CD player or smartphone. • Design: Timeless high-gloss design in white/black – an eye-catcher in any living room or home office. Technical data & connections: • Inputs (Digital): 1x Optical (Toslink), 1x Coaxial – ideal for modern TVs or streamers. • Inputs (analog): 1x line-in (RCA/RCA) for turntable (with pre-amp) or mobile phone. • Outputs: Dedicated 5-pin XLR connection to the speakers (cable included) ...

2 UNITS/SETS OF SDM0054 PACKED TOGETHER. A SINGLE SDM0054 CORRESPONDS TO: Set composed of 4 centesimal micrometers for measurements from 0 to 100 mm. Measurements: 0-25mm; 25-50mm; 50-75mm; 75-100mm. Certificate included Machine condition: unchecked. Approx. Transport dimension: LxWxH 280 x 120 x 130 mm; Approx. Weight: 3kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 2x SDM0054 PACKED TOGETHER: 280 x 240 x h130 mm - 6 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-43157-48

setup mounted on electrically adjustable desk, with HBM work cart Auction-ID: A1-45411-17

5 UNITS/SETS OF SDM0065 PACKED TOGETHER. A SINGLE SDM0065 CORRESPONDS TO: Set composed of 2 thousandth internal three-point micrometers for measurements from 12 to 20 mm. Measurements: 12-16 mm; 16-20mm. 20 mm diameter calibration ring included. Rod diameter 10.8 mm, maximum depth 150 mm. Certificate included Machine condition: unchecked. Approx. Transport dimension: LxWxH 240 x 170 x 60 mm; Approx. Weight: 5kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 5x SDM0065 PACKED TOGETHER: 240 x 850 x h60 mm - 25 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-43157-88

Drilling material HSS, TIN coated Consisting of the following sizes, 10 x 1 mm. / 10 x 1.5 mm. / 10 x 2 mm. / 10 x 2.5 mm. / 10 x 3 mm. 10 x 3.2 mm. / 10 x 3.5 mm. / 10 x 4 mm. / 10 x 4.2 mm. / 10 x 4.5 mm. 10 x 5 mm. / 10 x 5.5 mm. / 10 x 6 mm. / 10 x 6.5 mm. / 10 x 7 mm. 10 x 7.5 mm. / 10 x 8 mm. / 5 x 8.5 mm. / 5 x 9 mm. / 5 x 9.5 mm. 5 x 10 mm. / 5 x 10.5 mm. / 5 x 11 mm. / 5 x 11.5 mm. / 5 x 12 mm. 5 x 12.5 mm. / 5 x 13 mm. Note that all drill bits have a TIN coating. Supplied in a steel box. Condition: never used / new (5) Auction-ID: A1-45681-861

5 UNITS/SETS OF SDM0064 PACKED TOGETHER. A SINGLE SDM0064 CORRESPONDS TO: Set composed of 3 internal thousandth three-point micrometers for measurements from 6 to 12 mm. Measurements: 6-8 mm; 8-10mm; 10-12mm. 2 calibration rings included, diameter 8 and 10 mm. Rod diameter 5.8 mm, maximum depth 100 mm. Certificate included Machine condition: unchecked. Approx. Transport dimension: LxWxH 240 x 170 x 65 mm; Approx. Weight: 5kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 5x SDM0064 PACKED TOGETHER: 240 x 850 x h65 mm - 25 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-43157-58

With contents, dimensions: 193x330x65cm (HxWxD) Auction-ID: A1-45411-173

2 UNITS/SETS OF GER0002 PACKED TOGETHER. A SINGLE GER0002 CORRESPONDS TO: 6 tool holders, brand Freutek, type HSK-63F-ER40, balanced, up to 25,000 rpm, new packaged, lubricated in sealed bag and single pack. Machine condition: unchecked. Approx. Transport dimension: LxWxH 500 x 100 x 100 mm; Approx. Weight: 8kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 2x GER0002 PACKED TOGETHER: 500 x 200 x h100 mm - 16 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-43157-23

Dimensions: small table: 50x48, larger table: 70x40 Auction-ID: A1-45411-543

5 UNITS/SETS OF ATT0035 PACKED TOGETHER. A SINGLE ATT0035 CORRESPONDS TO: TAPS AND DIES SET 40 pcs. Professional set made of heat treated steel alloy. Taps and dies suitable for making threads on mild steel and aluminium. Supplied with key for taps and tapping bits. Protective case for transport and to always have them in order. Machine condition: unchecked. Approx. Transport dimension: LxWxH 330 x 210 x 50 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 5x ATT0035 PACKED TOGETHER: 330 x 1050 x h50 mm - 10 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-43157-12

9 sets, each consisting of frame 02.PR.0740B + 2 x fork 80 cm Auction-ID: A1-45411-212

With contents, dimensions: 193x330x65cm (HxWxD) Auction-ID: A1-45411-174

Pneumatic Impact Wrench Set 1/2\" 10 sockets in 9, 10, 11, 13, 14, 17, 19, 22, 24 and 27 mm 1 pc 1/2\" extension rod 1 x 4 mm Allen Wrench In storage case Air consumption at 6 bar 130 l/min Operating pressure 6.3 bar Torque 550 / 685 Nm Weight 2.5 kg Dimensions L-W-H 430 x 350 x 100 mm Condition: never used / new (5) Auction-ID: A1-45681-912

Absolute Top Quality HSS - 5% Cobalt Drill Bit. Consisting of the following sizes 10 x 1 mm. / 10 x 1.5 mm. / 10 x 2 mm. / 10 x 2.5 mm. / 10 x 3 mm. 10 x 3.5 mm. / 10 x 4 mm. / 10 x 4.5 mm. / 10 x 5 mm. / 10 x 5.5 mm. 6 x 6 mm. / 6 x 6.5 mm. / 6 x 7 mm. / 5 x 7.5 mm. / 5 x 8 mm. 3 x 8.5 mm. / 3 x 9 mm. / 3 x 9.5 mm. / 3 x 10 mm. in a sheet steel housing. Condition: never used / new (5) Auction-ID: A1-45681-870

Mold stamp set, see pictures Weight 12.5 kg Dimensions L-W-H 400 x 200 x 200 mm Condition: never used / new (5) Auction-ID: A1-45681-901

8 telescopic pull-outs, 1 swing door, Digital Thermometer RS pro RS 41 Auction-ID: A1-45526-19

Nut sizes in 1\": 30 - 31 - 32 - 34 - 36 - 38 - 41 - 46 - 48 - 50 - 55 - 60 - 65 - 70 - 75 - 80mm. 1 x Ratchet Head. 1 x extension rod 400 mm. 1 x extension rod 200 mm. 1 x T connector 500 mm. Condition: never used / new (5) Auction-ID: A1-45681-846

192 food sets for small animals in 16 boxes of 12 each, each consisting of 1 x food bowl, 1 x food scoop and 1 measuring cup Auction-ID: A7-45677-148

Various analogue and digital measuring instruments (calipers, bore gauges, micrometers, precision tools). Metal shelf cabinet included. Assorted and approximate quantities Estimated weight: 60 kg Approximate dimensions: 900x400x1800h mm Auction-ID: A7-44996-200

Set of roller skates for handling heavy loads from the EXPRESS brand, delivered in its original metal case. Complete set including several steel roller elements for the movement of industrial machinery and equipment. Used condition with signs of wear, oxidation and peeling paint (see photos). Box in good structural condition with closures present. Old, very robust and particularly heavy equipment. Information: Brand: EXPRESS Type: roller shoes / industrial trucks Metal case: yes Complete: yes Condition: Used Auction-ID: A3-43511-33550

set of tyres, from Massey-ferguson 3095, front tyres 2x 420/70 R28, 2x rear tyres 520/70 R28. Auction-ID: A1-40134-320

Consists of: Berko BFN240 Bj.2013, sn.13N014362, Creemers Eminent EDD1200 Bj.2008 sn. CAI325441. Auction-ID: A1-41992-107

General: • Extensive stainless steel catering and food processing set • Consisting of several professional devices and containers • Sale as a complete item • Robust, durable stainless steel design Components of the set: 1. Gas stove (MBM) Manufacturer: MBM (Italy) • Model: C6FV70 • Power: 33.1 kW • Multi-burner gas stove with oven • Stainless steel design 2. Industrial scales (Bizerba ITL) • Manufacturer: Bizerba • Model: ITL • Maximum load capacity: 60 kg (according to the nameplate) • Electrical connection: 230 V • Mobile version with frame 3. Stainless Steel Centrifuge/Fruit Processing (Shag) • Manufacturer: Zottel • With perforated basket (spin cycle) • Year of manufacture: 2011 4. Stainless steel tanks (mobile) • 2x tanks available • Capacity: approx. 200 litres each • Design: stainl ...

Punching tools / press tool components from MISUMI – i.e. punches and dies / cutting bushes (button dies) for sheet metal working. On the parts you can see designations like SJAS..., EMSD... and on the note several times MISUMI. MISUMI leads SJAS

Tires replaced in 2024, then about 15,000 km driven. New MOT comes up. Auction-ID: A1-42013-4

Width Sizes: 110cm, 60cm, 40cm — for 3/3.5T excavator — all buckets are equipped with reversing ears Auction-ID: A1-40134-234

Punching tools / press tool components from MISUMI – i.e. punches and dies / cutting bushes (button dies) for sheet metal working. On the parts you can see designations like SJAS..., EMSD... and on the note several times MISUMI. MISUMI leads SJAS

Contents: 2 x tables 95 x 95 x 73 cm, 4 x black cantilever office chair Auction-ID: A1-45762-147

Including 3 Dauphin office chairs, 58 x 58 x 87 cm (LxWxH), armrest height: 65cm; A filing cabinet of the brand Ophelis 114 x 50 x114 cm (LxWxH) depth 40cm; One desk 200 x 100 x 73 cm ( LxWxH) Height adjustable; An office lamp from the brand ZumTobel height 200cm light size 40 x 70 cm, A paper shredder from the brand Dahle 36 x 26 x 56 cm (LxWxH), without monitor or telephone Auction-ID: A1-45762-132

Punching tools / press tool components from MISUMI – i.e. punches and dies / cutting bushes (button dies) for sheet metal working. On the parts you can see designations like SJAS..., EMSD... and on the note several times MISUMI. MISUMI leads SJAS

Mobile table 160x80x73cm LxWxH, 2x swing chair office chair, Auction-ID: A1-45762-144

Mobile table 160x80x73cm LxWxH, 2x swing chair office chair, Auction-ID: A1-45762-142