126,739 used machines on RESALE, but how to find them? Machine Search
in stock on pallet Auction-ID: A1-45790-123
Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault desp ...
in stock on pallet Auction-ID: A1-45790-126
in stock on pallet Auction-ID: A1-45790-122
Key data: 250 KW
MAN gas engine is available with very low hours. Type: E2842E312 Scope of supply: CHP Gas line Control Panel Exhaust gas cooler Enclosed silenced container
PRESS DESIGN drive system: eccentric / crank PRESS FORCES total force (nominal): 80 to PRESS TABLE table surface (left-right): 850 mm table surface (front-back): 550 mm SLIDE table surface (left-right): 560 mm table surface (front-back): 376 mm spigot hole diameter: 50 mm stroke: 110 mm stroke rate (max.): 60 /min SLIDE (MECHAN. PRESS) slide adjustment: 80 mm stroke min.: 0 mm stroke max.: 110 mm TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 360 mm DIMENSIONS / WEIGHTS space requirements -left/right-: 855 mm space requirements -front/back-: 1635 mm total height: 2640 mm total weight approx.: 5400 kg ATTACHMENTS (PRESSES) 2-hand engagement: yes ...
Pick up in 2580 Putte Auction-ID: A3-43515-10657
CONTROLS conventional PRESS DESIGN drive system: eccentric / crank frame design: C-frame, single sided PRESS FORCES total force (nominal): 100 to SLIDE slide force: 100 to stroke rate (max.): 72 /min SLIDE (MECHAN. PRESS) slide adjustment: 80 mm stroke adjustment: yes stroke min.: 8 mm stroke max.: 112 mm TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 407 mm ATTACHMENTS (PRESSES) 2-hand engagement: yes for safe tools only
Key data: 264 KW, 450 kVA, 400 V
Jenbacher Gas-CHP J 208 GS-C Gas electricity and heat generator from 1994 with 67,000 operating hours, CHP unit with control and silencer, additional parts. 1 available 253 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Stamford HC 534C2, 450 KVA Manufacturer: Jenbacher Model: J 208 GS-C Type: Gas CHP Engine Serial Number: 21619 Engine power [KW]: 264 Electrical power [KWel]: 253 Speed [1/min]: 1,500 Year of Make: 1994 Hours: 67,000 Weight unit [kg]: 5,000 Dimensions LxWxH [cm]: 450 x 150 x 195 AC Generator Stamford HC 534C2 Manufacturer: Stamford Model No.: HC 534C2 Type: AC Synchronous Generator Serial number: 49059/2 Power [KVA]: 450 Voltage [V]: 231 / 400 Frequency [Hz]: 50 Current [A]: 649 Speed [1/min]: 1,500 Year of Make: 1994
Auction-ID: A1-45793-120
Key data: 2000 KW, 2500 kVA, 400 V
2MW Cummins QSV91 available complete with control panel, gas line, heat exchanger, log books and maintenance manuals etc.
Key data: 75 KW, 112 kVA, 400 V
Buderus Gas CHP EN 70 MAN E0836 E302 Gas electricity and heat generator from 2014 with 81,648 operating hours. 1 available 70 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 44.2 S7/4P, 112 KVA Manufacturer: Buderus Model No.: EN 70 Type: Gas CHP Engine: MAN E0836 E302 Serial Number: 100006776 Power [KW]: 75 Year of Make: 2014 Hours: 81,648 AC Generator Leroy Somer LSA 44.2S7/4P Manufacturer: Leroy Somer Model: LSA 44.2S7 C 6S/4 Type: AC Synchronous Generator Serial number: 30692/5 Power [KVA]: 112 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 162 Speed [1/min]: 1,500 Year of Make: 2014 Weight [kg]: 440
5pcs power generator (power plant) total power : 6750KVA, was completely overhauled in 2017 equipped with new control and higher-level regulation., the system was responsible for the emergency power supply of a large data center until 2025 was always kept up to date with the latest technical standards and continuously maintained and serviced, the system is in excellent condition. Engine: Deutz MWM TBD604 BV12, 200h operating hours, year 1994, Pgebqwdsyzb R Tskpgok Generator: Siemens 1FC7 567, 10.000V, 50Hz, 78A, 1350KVA, Aggregate control: DEIF , Genset control, new Version Year 2016/17, Higher-level control: DEIF, Load management, synchronization, fuel managemente, ec. ec. Year 2017, Circuit breaker 10KV : Siemens Silencers, recirculating coolers, pumps, ec. ec.
4 cylinder, engine runs but not with starter motor Auction-ID: A3-43520-17015
Neat power harrow. Outside surface rust from standing in very neat and little-used condition. Auction-ID: A3-43520-17018
PRESS DESIGN drive system: eccentric / crank PRESS FORCES total force (nominal): 15 to PRESS TABLE table surface (left-right): 360 mm table surface (front-back): 260 mm SLIDE stroke rate (max.): 165 /min SLIDE (MECHAN. PRESS) slide adjustment: 40 mm stroke min.: 7 mm stroke max.: 60 mm TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 226 mm ELECTRICAL SPECIFICATIONS total power consumption: 1.15 kW mains voltage: 400 V DIMENSIONS / WEIGHTS total weight approx.: 630 kg ATTACHMENTS (PRESSES) safety guard / safety door: yes 2-hand engagement: yes foot engagement: yes European CE standards: yes
Includes: transport box 1230x810x1030mm, various accessories.
Equipped with 12500 W; 5m; Maximum power 120A; Unused in box
including punching tools, machine is professionally disconnected and disassembled for loading on your transport, additional costs are mentioned separately during both
Key data: 664 KW, 830 kVA, 400 V
Running hours 60,000
PRESS DESIGN drive system: eccentric / crank PRESS FORCES total force (nominal): 45 to PRESS TABLE table surface (left-right): 700 mm table surface (front-back): 440 mm opening in bed (diameter): 40 mm SLIDE table surface (left-right): 410 mm table surface (front-back): 280 mm stroke rate (max.): 110 /min SLIDE (MECHAN. PRESS) slide adjustment: 65 mm stroke min.: 0 mm stroke max.: 90 mm main drive power: 5.5 kW TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 380 mm distance between columns (H-frame): 360 mm ATTACHMENTS (PRESSES) 2-hand engagement: yes foot engagement: yes European CE standards: yes
Offer 25369 Specifications: - Max. load capacity with full ballast approx. 250 kg - 4 Vacuum Glass Suction Cups 200 mm - Lifting height in the middle of the top suction cup up to approx. 2.5 m - Separate height adjustment + twisting device - min. construction height approx. 1285 mm - max. overall height approx. 2720 mm - max. total length approx. 2100 mm - min. width approx. 620 mm - Net weight depending on ballast approx. 260 to 410 kg - Charger 220 V - Battery 12 V -Operating instructions
Key data: 150 KW, 220 kVA, 400 V
Sokratherm Gas-CHP GG 140S oE Gas electricity and heat generator from 2010, with approx. 60,000 operating hours, with control and silencer. 1 available 140 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: MarelliGenerators MJB 250 LA4, 220 KVA Manufacturer: Sokratherm Model: GG 140S oE Type: Gas CHP Serial Number: F103064 Engine: MAN E2876 E312 Electrical power [KWel]: 140 Thermal power [KWth]: 216 Gas capacity [KWgas]: 392 Year of Make: 2010 Operating hours: approx. 60,000 Weight unit [kg]: 2,850 Dimensions LxWxH [m]: 3.00 x 0.9 x 2.4 AC Generator Marelli MJB 250 LA4 Manufacturer: MarelliGenerators Model: MJB 250 LA4 Type: AC Synchronous Generator Serial Number: MJB2572GT68MO Power [KVA]: 220 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 317 Speed [1/min]: 1,500 Year of Make: 2010
PRESS DESIGN drive system: eccentric / crank PRESS FORCES total force (nominal): 50 to PRESS TABLE table surface (left-right): 700 mm table surface (front-back): 450 mm SLIDE table surface (left-right): 430 mm table surface (front-back): 200 mm clamping surface diameter: 340 mm spigot hole diameter: 40 mm stroke: 90 mm stroke rate (max.): 70 /min SLIDE (MECHAN. PRESS) slide adjustment: 70 mm stroke min.: 0 mm stroke max.: 90 mm main drive power: 3 kW TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 300 mm DIMENSIONS / WEIGHTS space requirements -left/right-: 700 mm space requirements -front/back-: 1295 mm total height: 2300 mm total weight ...
PRESS DESIGN drive system: eccentric / crank PRESS FORCES total force (nominal): 80 to PRESS TABLE table surface (left-right): 860 mm table surface (front-back): 620 mm thickness of bolster plate: 70 mm opening in bed (diameter): 165 mm SLIDE table surface (left-right): 570 mm table surface (front-back): 390 mm spigot hole diameter: 50 mm stroke: 120 mm SLIDE (MECHAN. PRESS) slide adjustment: 90 mm stroke min.: 9 mm stroke max.: 120 mm main drive power: 5.5 kW TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 360 mm DIMENSIONS / WEIGHTS space requirements -left/right-: 1420 mm space requirements -front/back-: 1700 mm total height: 2990 mm to ...
Key data: 48 KW, 60 kVA, 400 V
Execution: Category: Emergency Power Generator Stationary Aggregate type: stationary Design: Soundproofed Technical data engine: Engine manufacturer: Deutz AG Engine type: F 6 L 912 Motor power: 56 KW Cooling: Air-cooled Starting: Electric 12 V DC Speed: 1500 rpm Fuel: Low sulphur fuel oil Emission standard: TA-Luft Technical data generator: Generator manufacturer: Stamford Generator Type: S1L2-Y Generator power: 60 kVA Generator current: 86.40 amps Short-circuit current: 259.2 amps Overload: 95.04 amps Voltage 400 / 231 Volt Voltage regulator: yes electronic AVR Power factor: cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Version: Automatic start Functions: Emergency power operation Switch: Generator switch 4 poles Delivery set up Base frame tank with drip pan Capacity / litre: 1 ...
Hydraulic power unit REXROTH consisting of: Hydraulic tank 250 Ltr. Electric motor 15 kW REXROTH Internal Gear Pump HYDAC Accumulator SCHMÖLE Heat Exchangers Temperature monitoring Hydraulic filter Return filter
Key data: 2000 KW, 2500 kVA, 10500 V
2x caterpillar 3520-C Unused genset! 0-Hours gensets are located in our warehouse for inspection adres: Kranenpool 10 6443VA Brunssum Netherlands check our website for more generators! generalpowerholland.nl +31681163153 what's app number
Key data: 70 KW, 63 kVA, 400 V
HAATS Gas CHP G 50 K Gas electricity and heat generator from 1999 with unknown operating hours. 1 available 50 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA C44.1 M3, 63 KVA Manufacturer: HAATS Model: G 50 K Type: Gas CHP Engine: MWB 12 NA-K (Mercedes engine block) Serial Number: GS50-113VLFN03089901 Power [KW]: 76 Power [KWel]: 50 Year of Make: 1999 Operating hours: unknown Weight unit [kg]: 2,500 Dimensions LxWxH [cm]: 360 x 120 x 200 AC Generator Leroy Somer LSA C44.1 M3 Manufacturer: Leroy Somer Model No.: LSA C44.1 M3 Type: AC Synchronous Generator Serial Number: FF089446/02 Power [KVA]: 63 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 91 Speed [1/min]: 1,500 Year of Make: 1998 Weight [kg]: 315
The VISCOTHERM Hydraulic Power Unit B/C 11–22 Z/HP is a powerful, robust pump unit for the reliable supply of the ROTODIFF hydraulic motor in decanter centrifuges. With an 11 kW electric motor, a gear pump (22 l/min at 270 bar) and integrated proportional control, it enables infinitely variable adjustment of the screw speed during operation. The 85-litre tank, an efficient oil/water cooler and extensive monitoring and protection components ensure safe and long-lasting operation – even under demanding industrial conditions.
Steam Boiler CHP Power Plant with 240 MW Pyroflow CFB Boiler A combined heat and power (CHP) plant in very good condition, with an electrical capacity of 88 MVA and a thermal capacity of 240 MW. The plant is designed to operate primarily on wood-based biomass, with coal as a backup fuel. This is a complete power plant, still in full operation, and includes all technical systems from fuel feeding to the dispatch of electricity and live steam. The equipment has been exceptionally well maintained and extensively upgraded throughout its lifetime, meeting the most stringent modern quality standards. The steam boiler utilises Circulating Fluidised Bed (CFB) technology with the commercial-type PYROFLOW, manufactured in Finland by Ahlström in 1989. This CFB boiler delivers a steam flow of 100 kg/second at a pressure of 137 bar and a temperature of 535ºC. The primary fuel has been wood-ba ...
PRESS DESIGN drive system: eccentric / crank table cushion: yes PRESS FORCES total force (nominal): 63 to nominal work capacity: 630 kNm PRESS TABLE table surface (left-right): 900 mm table surface (front-back): 560 mm opening in bed (diameter): 250 mm SLIDE table surface (left-right): 450 mm table surface (front-back): 310 mm clamping surface diameter: 50 mm stroke: 100 mm stroke rate (max.): 100 /min SLIDE (MECHAN. PRESS) slide adjustment: 80 mm stroke min.: 17.5 mm stroke max.: 100 mm DIE CUSHION (TABLE CUSHION) number of cushions: 1 TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 340 mm distance table - slide max.: 440 mm ELECTRICAL SPECIFICATION ...
maximum number of results exceeded
please refine your search
50 € 
