gen power used for sale

FINN-POWER SG-6 turret punch press was built in 1999 in Finland by LILLBACKA CORPORATION. The machine has been regularly serviced throughout its service life. The FINN-POWER Shear Genius SG6 was created as an answer to the daily challenges of modern business. This system is designed for precision punching, stamping and cutting of sheet metal with a maximum length of 3061 mm and a width of 1528 mm. The integration of all the necessary equipment in a single place enables significant reductions in production costs as well as overall working time. All machining processes are performed fully automatically, in a single work cycle. The loading system separates a single sheet from the stack and fixes it in pneumatic clamps. The holes are punched by means of reliable tools taken from the 20-station turret. Parameters such as stroke depth, stroke length and stroke speed can be fully adapted  ...

Hydraulic motor Manufacturer : Rotary Power Article: SMA 1430 C1 182 Condition : New

Key data: 520 mm, 520 mm

Parotec Face Plate Pallet PowerGrip 160 Stitch Partool Zero Point Clamping System Face plate custom-made by a sister company von Schunk. Such a face plate for the Parotec is not available for sale. Very good used condition. Various milling on the top, see pictures the dimensions can be found in the pictures. Weight approx. 50kg. There are other Parotec accessories in stock Other used interchangeable plates, a steel groove plate, You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice.

Key data: 318 t, 318

Parotec Face Plate Pallet PowerGrip 160 Stitch Partool Zero Point Clamping System Face plate custom-made by a sister company von Schunk. Such a face plate for the Parotec is not available for sale. Very good used condition. Various milling on the top, see pictures the dimensions can be found in the pictures. Weight approx. 50kg. There are other Parotec accessories in stock Other used interchangeable plates, a steel groove plate, You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice.

Key data: 318 t, 318

Parotec Slot Plate Pallet Power Grip 160 Stitch Partool Zero Point Clamping System Very good used condition. the dimensions can be found in the pictures. Weight approx. 30kg. There are other Parotec accessories in stock More used interchangeable plates, one face plate D.52cm You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice.

Two (2) Surplus/Never used, Mobile Substations 25/30 MVA, 115/13.8 kV. 60 Hz. 3 Phase, with ODTF1/ODAF2 cooling, YNd1 Connection, Cooper Windings, on a low bed chassis trailer, HV Surge arrester, High Capacitive Voltage transformer, 145 kV Hybrid Switchgear, Outdoor Circuit Breaker Roof Bushing, Control and Protection Panel, Battery Charger, Batteries and all the auxiliary equipment for this substation.

Automatic planing and moulding machine WEINIG Powermat 700 Year of construction 2020 Tool Assembly 018 (u-r-l-o-o-u) 1. Spindle bottom 7.5 Kw 6,000 rpm 2nd spindle right 15 Kw 8,000 rpm 3. Spindle left together with right spindle driven 8,000 rpm 4. Spindle top 11 Kw 8,000 rpm 5. Spindle top 7.5 Kw 8,000 rpm 6. Spindle bottom 7.5 Kw 8,000 rpm Feed rate 5 Kw Feed speed infinitely variable 5 - 40 m/min Total connection 56.5 Kw Equipment: - Comfort Set - Electronic digital displays - Folding device - MarathonCoating for table insert in front of the 1st spindle  - Stop lip after the right spindle with quick adjustment - Pressure roller from above opposite the right spindle, swivels away and spring-loaded - Shorter roller spacing compared to the right spindle - Extension of the pendulum axle compared to the left spindle up to 150 mm - CNC control for dimension adjust ...

FINN-POWER X5 turret punch press was built in 2006 in Finland by Finn-Power OY (now PRIMA INDUSTRIE S.p.A.). The machine is used for precision machining of sheet metal with a maximum thickness of 8 mm. The machining process is performed fully automatically by means of a reliable workhead, operating with a maximum force of 25 tonnes. Together with the head, a 20-station turret cooperates which enables a large number of tools of all sizes and types to be stored. The material feed, in turn, is carried out on a large brush table, which prevents scratches and scrapes on the workpiece surface and significantly reduces noise levels. All this is complemented by equipment, consisting of, among others, light curtains and tools. Thanks to all of this, the offered FINN POWER X5 CNC punching machine is the best choice for companies that place emphasis on the high quality of manufactured parts. The to ...

Frequency converters, frequency converters, drive converters, controllers, inverters -Manufacturer: Siemens, Sinamics Power Module 240 -Input: 3 AC 380-480 V 31.5 A 50/60 Hz -Motor: IEC 7.5/11 kW -Dimensions: 340/190/H290 mm -Weight: 12.7 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 135 mm -Piston rod: Ø 60 mm - Stroke: 1020mm -Max. Pressure: 175 bars -Number: 2x available -Price per piece -Dimensions: 1660/235/H200 mm -Weight: 130kg

Cordless riveting tool, blind rivet gun, blind rivets -Transfer in current condition as seen -The device works, the batteries are defective -without: batteries -Dimensions: 345/90/H250 mm -Weight: 5.3 kg

Converter module -Type: S 909 -Number: 2x module converters available -Price: per piece -Weight: 6.3 kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Manufacturer: Oldham, charger type High Power III 36-80 -Input voltage: 220/380V 50Hz -Power: 36 V / 80 A -Dimensions: 555/410/H790 mm -Weight: 66 kg

2-component gun, multi-function gun, cartridge gun, cartridge press, battery gun, battery-powered cartridge press -Manufacturer: Meritool, cordless gun PowerPush 5026 Type 2 -Cartridge: 600 ml -Accessories: incl. battery 20 V, see photos -Dimensions: 630/80/H290 mm -Weight: 2.3 kg

Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control, converter, controller -Manufacturer: Power Automation, Servo Controller -Type: MI305 -Dimensions: 300/115/H250 mm -Weight: 3.8 kg/piece

CNC control, control rack, electronic module -Manufacturer: Power Automation / Innovance Technology, Control -Type: Replacement device ArtNo. 181998 -Individual components: see photos -Dimensions: 255/330/H140 mm -Weight: 5.7 kg

Manufacturer: SHW Type of Machine: PowerSpeed 5 Condition: used 5x axis 5k hours was used for Aluminum and stainless steel 48 place tool changer 8 meter travel table Find more here - .ucymachines/ Contact us at - sales@ucymachines

CNC turning-milling center Emco Hyperturn 65 Powermill SMYB Commissioning 7/2019 At call! Siemens 840D-SL Shopturn Main spindle BigBore spindle passage 76mm KK8 - 4,000 1/min Sub-spindle KK6 - 5,000 1/min 40-speed chain magazine HSK-T63 Turret bottom VDI30 / Sauter Electronic handwheel Emco Tool Breakage and Wear Gear milling Shopturn Expansion Pack 5-axis simultaneous machining Energy management for Sinumerik OPC UA / Siemens interface 3D machine model Emco Standard Bar Feeder Interface Machine Status Lamp LED Multiflow Cleaning Gun Oil Mist Separator Belt filter system with IKZ Main Spindle Clamping Hook Hainbuch Clamping Top Mini Combi Ax Hoist Sub-spindle Schunk 185mm THW-plus with hard jaws The options list is complete! No interest in dealer enquiries! No separate dealer price! WB mechanics GmbH is a precision mechanics workshop that markets its ...

CNC turning-milling center Emco Hyperturn 65 Powermill SMYB Commissioning 10/2017 At call! Siemens 840D-SL Shopturn Main Spindle SuperBigBore Spindle Passage 95mm KK8 - 3,500 1/min Sub-spindle KK6 - 5,000 1/min Milling spindle HSK-T63 12,000 1/min / new milling spindle 2024 40-speed chain magazine HSK-T63 Turret bottom VDI30 / Sauter Electronic handwheel Emco Tool Breakage and Wear Gear milling Shopturn Expansion Pack 5-axis simultaneous machining Energy management for Sinumerik OPC UA / Siemens interface 3D machine model Emco Standard Bar Feeder Interface Machine Status Lamp LED Multiflow Cleaning Gun Oil Mist Separator Belt filter system with IKZ Main Spindle Clamping Hook Hainbuch Clamping Top Mini Combi Ax Hoist Sub-spindle Schunk 185mm THW-plus with hard jaws The options list is complete! No interest in dealer enquiries! No separate dealer price!  ...

Manufacturer: Homag, Type: Power FL 14/10/12/CF, Year: 2004, Control: yes, Number of milling spindles: 4, Required space L x W x H mm: 8400x4750, Year :2004

Manufacturer: Siemens, Type: SITOP power 20, Serial number: 6EP1 436-2BA00, Power Input: 50/60Hz, Power Output: 22,8-26,4V,

For sale are 4 pieces of fully overhauled turbochargers from the manufacturer ABB. These turbochargers have an operating time of 0 hours since their complete overhaul and are therefore in mint condition. 1 piece turbocharger Z140, Ref. P/N: 634433 1 piece Turbocharger Power2 340-H44 HP, Ref. P/N: 1205685 1 piece turbocharger Z140, Ref. P/N: 634434 1 unit Turbocharger Power2 340-H44 HP, Ref. P/N: 1205686 The year of manufacture and the nominal power in kW are not available (nv). Please do not hesitate to contact us with any questions or for more information. We look forward to your inquiry. Connection dimensions suitable for the following motors: - Jenbacher J624

We sell 170 x Dell PowerEdge T340 In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete systems and components in refurbished conditions from all these manufacturers ...

KIMLA POWERCUT LF 1530 6 kW fiber laser for tubes and sheet metal was built in 2021 in Poland. The reliable machine built on a rigid monolithic body equipped with state-of-the-art fibre technology guarantees the achievement of very smooth and even edges along the entire length of the workpiece, regardless of the machined material. The sheets are cut with a high-quality 6 kW fibre optic beam on a steel work table with integrated automatic pallet changing system, which allows uninterrupted machining by simultaneous loading and unloading of the workpieces during the cutting process. All cutting parameters are programmed in the intelligent PC-CAM CNC controller, which allows for very fast and dynamic operation with excellent accuracy. The KIMLA fibre laser cutting machine is also equipped with an integrated cutting system, extending the machine’s machining capabilities to include the cu ...

Manufacturer: FINN Model: POWER LP6 Year of Manufacture: 2007 Working hours: 21,500 available : immediately Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: FINN POWER Model: LPe5 Year of Manufacture: 2002 Work area: 2500×1250 mm (+ repositioning) AVAILABLE: immediately Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Prima Power Model: Combo Type of Machine : Laser cutting machine Twin-tower automated sheet metal warehouse by PrimaPower - specyfikation: - Combo 1530/2 H6.3, twin-tower warehouse, height 5,970 mm - Year of manufacture 2014 - Control panel - IOW station on the Y axis with rear bumpers for material positioning on block no. 2 - Barrier system and service door for the IOW station - Double wagon on the Y axis for connecting the LD machine to the SG on block no. 1 - 38 cassettes with a load capacity of 3 tons each, sheet stack height up to 100 mm - Maximum stored material dimensions 3000 x 1500 mm. Sheet stack up to 100 mm - The warehouse is loaded with full pallets (without a wooden support) using a forklift and a forklift, or with single sheets - Two trolleys on the outfeed side deliver material to connected devices. The trolley with a further outfeed runs ...

; Gross weight [kg]: 35

; Gross weight [kg]: 2250

pressure: 175 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 180 mm/sec return speed: 135 mm/sec work speed: 10,0 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 90,0 mm oil volume: 200 ltr. voltage: 400 Volt total power requirement: 15,0 kW weight: 11.950 kg range L-W-H: 5100 x 2150 x 2850 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen 2D graphic programming 15 high definition color TFT screen Bending sequence calculation Product programming and display in real size USB interface - Motorized backgauge with R-axis, on recirculating ball spindles - ...

pressure: 100 t chamfer lenght: 2600 mm distance between columns: 2200 mm column arm: 410 mm ram stroke speed: 200 mm/sec work speed: 9.5 mm/sec return speed: 155 mm/sec work stroke: 275 mm dayligth: 530 mm table height: 900 mm table width: 90.0 mm oil volume: 150 ltr. voltage: 400 Volt total power requirement: 7.5 kW weight: 6850 kg range L-W-H: 3750 x 1950 x 2800 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 53T (touchscreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.8 ...

pressure: 175 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 410 mm ram stroke speed: 180 mm/sec work speed: 10.0 mm/sec return speed: 135 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 90.0 mm oil volume: 200 ltr. voltage: 400 Volt total power requirement: 15.0 kW weight: 9450 kg range L-W-H: 4250 x 2150 x 2800 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-58T graphic/touch screen 2D graphical programming 15 TFT color screen with high resolution Bending sequence calculation Product programming and real size display USB interface - Motorized backgauge with R-axis, on ball screws - X = 800 mm R =  ...

pressure: 60.0 t chamfer lenght: 2100 mm distance between columns: 1700 mm column arm: 410 mm ram stroke speed: 160 mm/sec work speed: 10.0 mm/sec return speed: 165 mm/sec work stroke: 275 mm dayligth: 530 mm table height: 900 mm table width: 90.0 mm oil volume: 150 ltr. voltage: 400 Volt total power requirement: 7.5 kW weight: 5640 kg range L-W-H: 3250 x 1960 x 2750 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 53T (touchscreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135 ...

pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 180 mm/sec work speed: 10.0 mm/sec return speed: 160 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 160 mm oil volume: 300 ltr. voltage: 400 Volt total power requirement: 18.5 kW weight: 13800 kg range L-W-H: 5150 x 2250 x 3000 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen 2D graphic programming 15 high definition color TFT screen Bending sequence calculation Product programming and display in real size USB interface - Motorized backgauge with R-axis, on recirculating ball spindles - X ...

The power encoder cable for Tetra Pak systems plays a vital role in the operation and monitoring of various equipment within the Tetra Pak machinery, particularly in processes like filling and packing. Here are some key features and details regarding power encoder cables used in Tetra Pak systems:, Key Features of Power Encoder Cables:, - Function: The power encoder cable connects the encoder to the control system, allowing for the transmission of signals that monitor the position and speed of moving parts in the machinery., - Signal Transmission: These cables are designed to carry data signals related to rotational positioning, helping ensure that machines operate accurately and efficiently., - Durability: Power encoder cables are built to endure the rigorous conditions within Tetra Pak machinery, including exposure to moisture, variable temperatures, and physical wear. They are often m ...

Siemens SITOP UPS1600 Power Supply Item number: 6EP4137-3AB00-2AY0 Type: SITOP UPS1600 Input: DC 24V/43.4A Output: DC 24V/40A Battery connection: DC 24 V / 3 A Weight: approx. 2.5 kg Condition: used Price without VAT per piece Country of origin: Austria Piece1

Key data: 4 Meter, 13 t

Machine Type: Plasma Inverter Cutting Machine Make Hypertherm Type Powermax 30 AIR Serial No. 033.100 Connection voltage 1 x 230 Volt Adjustment range 15 – 30 amps Duty cycle 20% ED at 30 amps Current adjustment infinitely variable max. cut-off cut for a short time 15 mm at 125 mm/min max. quality cut for a short time 7 mm at 500 mm/min Cooling inverter through built-in fan Cooling burner compressed air cooled Portable assembly system design Fuse 16 Ampere Optional accessories integrated compressor Dimensions L x W x H 420 x 195 x 330 mm Weight with burner 13 kg Age 4 years Condition workshop tested, very good incl. UVV test report Scope of delivery Plasma cutting system with the following accessories: 1 piece AIR T30 hand cutting torch 4.5 mtr. long 1 piece ground cable 1 Piece Instruction Manual Warranty: 18 months from th ...

Punching force: 300kN, max. operating pressure: 300bar, weight: 13500kg, operating hours: approx. 52300h. Documentation available. An on-site inspection is possible.

A bevel gear rolling test machine Gleason is available. Workpiece diameter: 330mm, max. center distance: 203mm, driver spindle nose distance range: 100mm-250mm, max. offset range upper/lower: 203mm/50mm, driver spindle bore: 99mm, driver spindle taper per meter: 15.5mm/m, counter spindle bore: 58mm, counter spindle taper per meter: 12.7mm/m, spindle speed: 1500rpm, test angle range: 0°-180°, driver spindle repeatability: +/-0.004mm, runout: +/-0.003mm, machine dimensions X/Y: approx. 1550mm/2050mm, weight: approx. 2400kg. An on-site inspection is possible.

CNC Prima Power Laser Cutting & Welding Machine TYPE: Optimo 2545 Basic: X= 4,500mm, Y= 2,500mm, Z= 1,020mm Length of the shaker (per PC): 4000 mm Width 2250mm/ Duty width: 3000mm Height: < 400 mm Process path (with coupled movement): 10,000 mm Loading capacity: 600 kg/m2 Max Speed: 0.5m/s Max acceleration: 0.5m/s2 Max kickback:

PowerPak 560 packaging machine for soft and hard film, fully equipped (cross-cutting, cross-cutter, longitudinal crushing knife, perforating device, and standard longitudinal cutting) features two movable labelers (top and bottom web) 510 mm wide x 590 mm long for pre-feeding 30 A 20 kW Triolabel printing device, Machine designation: GEA Powerpack 560, Construction year: 2017, Mains connection: 3/N/PE 400V 50/60 Hz, Circuit diagram number: ELTL170300

KIMLA POWERCUT LF1020 fiber laser was built in 2022 in Poland by POLCOM Przemysław Kimla. The machine has worked for a total of 814 hours and is in very good condition. Laser cutting is performed by means of a stable 2 kW fibre beam, which is generated by a resonator of the highest energy efficiency. A focusing lens system inside the cutting head ensures optimum beam geometry for various types of workpieces. As a result, the edges of the machined workpieces are distinguished by their unprecedented smoothness and absence of irregularities. The entire machining process is fully automatic, thanks to the use of an automatic pallet exchange system. This system enables simultaneous loading and unloading of workpieces during cutting, thus increasing production efficiency and reducing machine downtime to a minimum. The POWERCUT LF1020 fibre laser is offered with an extensive range of equi ...

This Walter Helitronic Power Grinding machine was manufactured in the year 2004. It is equipped with a WALTER HMC 600 control unit and has 5 axis. The machine has a spindle speed of 7000 rpm.

FINN-POWER LP6 punch laser machine was manufactured in 2008 in Finland by FINN-POWER OY. The machine was used for machining AISI 304 and AISI 316 stainless steel sheet metal. Since its purchase, it has been regularly serviced by the manufacturer and has undergone annual technical inspections. The FINN-POWER LP6 is a high-performance sheet metal machining center that combines punching and laser cutting technologies. It enables comprehensive machining of workpieces with a maximum thickness of 8 mm, eliminating the need for additional operations on other machines. The use of both these technologies in a single system reduces task completion times and increases overall production efficiency. Punching is performed by means of a hydraulic cylinder, whose stroke and speed are fully numerically controlled. The ability to programme the upper stroke limit enables the punch’s movement to be ...