gem 520 used for sale

Inv. Num. : 7019 Type: KM 125-520C1 Producer: Krauss Maffei Created: 2004 Parameters: Duty cycle: 4818 h Clamping force: 125 t Plate dimensions: 745x770 mm Injection weight: 6000 kg

Manufacturer: Block-trafo EMI Filter , Type: HLD110 500/75 520 V AC 75A AC 50-60 Hz , Sale without warranty: UR=520 V AC, No right of return: HPF 25/085/21, Installation height: 75A AC,

Manufacturer: Esa Steuerungsdiplay, Type: VT 520G, FREE TEXT: war verbaut in Spritzmaschine Cefla,

Manufacturer: Celaschi, Type: TSA 520, Year: 1987, Maschinensteuerung: max. 290, Motore Maschine 1: 150, Magazine: 150, Schrumpftunnel: 2x3, Min.-max. workpiece height in mm: 5,5, Working hight min-max mm: 5,5, Cam distance mm: 5,5, Year :1987

Ref. no.: 18273 Hersteller: ARBURG Year of construction: 2008 Clamping unit Clamping force: 200 ton Opening stroke: 650 mm Distance between tie bars: 520 x520 mm Mould height min.: 250 mm Opening width: 900 mm Platen size (h x v): 728 x 728 mm Injection unit Screw diameter: 55 mm Injection volume: 474 cm³ Shot weight: 434 g Injection pressure: 1650 bar Measurements and weight Dimensions: 5.45 x 1.8 x 2.1 m Machine weight: 7150 kg

Ref. no.: 18271 Hersteller: ARBURG Year of construction: 2005 Clamping unit Clamping force: 200 ton Opening stroke: 650 mm Distance between tie bars: 520 x 520 mm Mould height min.: 250 mm Opening width: 900 mm Platen size (h x v): 728 x728 mm Injection unit Screw diameter: 55 mm Injection volume: 474 cm³ Shot weight: 434 g Injection pressure: 1650 bar Measurements and weight Dimensions: 5.45 x 1.8 x 2.1 m Machine weight: 7150 kg

grinding diameter max.: 75 mm grinding diameter - min.: 2,5 mm grinding wheel diameter: 508 mm max. width of grinding wheel: 254 mm regulating wheel width: 254 mm regulating wheel diameter: 280 mm weight: 8,6 t Centerless Grinding Machine | Lidkoping 520 Equipped with: - 1 Electrobalance system - 1 CNC plunge on the working wheel - 1 CNC drive motor on the control grinding wheel - Automatic pass on the workung wheel diamond cutter - 2 hydraulic diamond cutters - 1 Ruler holder for working in a row The machine is in a well contained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: CL520 | CL-520 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2-083-01-5203 -Type: 2083015203 -Number: 19x control cards available -Price: per piece -Dimensions: 20/190/H260 mm -Weight: 0.28 kg

Control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2-083-01-5201 -Type: 2083015201 -Number: 16x control cards available -Price: per piece -Dimensions: 20/190/H260 mm -Weight: 0.36 kg

Control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2-083-01-5202 -Type: 2083015202 -Number: 5x control cards available -Price: per piece -Dimensions: 20/190/H260 mm -Weight: 0.33 kg

Labyrinth housing seal -d: 90 mm -D: 145 mm -B: 24 mm -Number: 15x available -Price: per piece -Weight: 2 kg

Inert gas welding device, arc welding system, MIG/MAG welding system -Scope of delivery: without wire feed unit with hose package, according to the pictures -Manufacturer: Ess, inert gas welding machine MIG-MAG 520 MW without wire feed -Type: 520-2MW -Max. Welding power: 500 A -Water-cooled -Dimensions: 1160/500/H810 mm -Weight: 303 kg

Stacking boxes, stacking boxes, steel boxes, Euro stacking boxes, , Euro stacking containers, Euro stacking containers, transport and stacking containers, material boxes, rubbish containers -Manufacturer: Schäfer, metal container material box stackable -Material: galvanized steel -Number: 18x Container available -Price per piece -Dimensions: 1000/520/H615 mm -Weight: 39 kg/pc.

Oil hand pump, oil cabinet, oil cabinet, oil conveyor, oil dispenser, oil dispenser, oil station, oil slinger -Handover: in the current condition as seen -Level indicator: missing, see photos for condition -Manufacturer: Tecalemit, mobile oil dispenser with hand pump -Item no.: 1.520201.1 -Tank capacity: approx. 30 liters -Pump: hand operated -Hose: lockable with tap -Dimensions: 500/440/H820 mm -Weight: 17 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, milling unit from edge banding machine BRANDT KM 36 -Motor: Homag 0.55 kW / 12000 rpm -Voltage: 220V / 200 Hz -Dimensions: 520/450 / H570 mm -Weight: 66 kg

PLC control, electronic module, noise filter -Block Part.No.: B 0901031 -UR: 520 V 50-60 Hz 30 Aac -Dimensions: 270/70/H95 mm -Weight: 1.7 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 40 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Price: per piece -Number: 2 pieces -Dimensions: 85/56/H45 mm -Weight: 0.35 kg/piece

Straight grinder, straight grinder, belt grinder, internal cylindrical grinder, angle grinder, cut-off grinder -Pneumatic straight grinder -Length: 520 mm -Dimensions: 800/130/H130 mm -Weight: 5.5 kg

Band sawing machine Kasto HBA 520 AU saw area 350 x 350 mm, table load 7000 kg. Machine immediately available and available. Free truck loading.

KRAUSS MAFFEI KM 110-520 C1 injection moulding machine was built in Germany in 2003. The machine used in production plants produces top-quality plastic products using the injection moulding method, which involves feeding a plastic material of sufficient plasticity into an injection mould, which is then clamped with a high force of 110 tonnes. To ensure the highest possible operating efficiency and productivity, the machine uses reliable components, such as a powerful screw with a diameter of 45 mm and an ejector with a force of 22 kN. The KRAUSS MAFFEI KM 110/520 C1 injection moulding machine weights 6000 kg. Technical data of the KRAUSS MAFFEI KM 110-520 C1 injection moulding machine - mould clamping force: 110 t (1100 kN) - mould opening force: 7 t (70 kN) - injection volume: 275 cm3 - injection capacity: 159 cm3/s - injection pressure: 1878 bar - injection weight: 250 g - p ...

We sell our LAMEC 520, which was in use until recently, with die quick coupler; Drive press: new motor 1x 75kW with 1450rpm + alternatively 1x 110kW with 985rpm for biomass, incl. 2 pcs Pcs conditioners and 2 pcs dosing units frequency controlled; Control with star/triangle combination for 75kW motor, incl. several roller wheels and various dies; built-in die 4x40 for animal feed,

impressions: - Mio. max. printing speed sheets: 13000 /h max. paper size: 36 x 52 cm serial no.: 1809 dampening system: konventionell The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG 520-2 MW -Type: 520-2MW -Max. Welding power: 500 A -Water cooled -Wire feed case: ESS DVK 17 -Dimensions: 1160/500/H1220 mm -Weight: 379 kg

x-travel: 750 mm y-travel: 1000 mm z-travel: 870 mm Control: 840 D total power requirement: 29 kW weight of the machine ca.: 22,5 t dimensions of the machine ca.: B 3,2 x L 6 x H 3.3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale are 3 Sumitomo Demag IntElect 150/520-410 injection molding machines in good technical condition, complete with hydraulic stations, Witmann Battenfeld W-721 robots (3 axes) and robot work area fences. Stored in a heated room. Unfortunately, there is no way to see the operating time, because... The injection molding machines are not connected to the power supply. Clamping unit 1500. Closing force 1500 kN, holding force 1650 kN, opening stroke max. 495 mm, built-in mold height min/max 275/585 mm, max. the distance between the plates for clamping the mold is 1080 mm, the plates for clamping the molds are 770x770 mm, the clearance between the columns is 520x520 mm, the weight of the mold is max. 1700 kg, which makes the weight of the mold on the movable clamping plate 1150 kg. Ejector. ejector stroke - 125 mm, ejection force 35 kN, ejector return force - 35 kN Injection unit 41 ...

Clamping force: 125 tons Closure system: hydraulic Plate dimensions (H x V): 805x770 mm Dimensions between guide bars (H x V): 530x470 mm Mold min. thickness: 300 mm Screw diameter: 45 mm Injection volume: 275 cm3 Injection weight in PS: 250 g Pressure on material: 1878 bar Length x Width x Height: 4,48 x 1,5 x 2,2 m Weight: 7690 kg Year: 2005 Equipment: Hydraulic ejector Ejector stroke: 150 mm Ejector force: 22,6/9,9 kN Cooling circuits: 6

Fully hydraulic closing system, MC 4 control system with color monitor, integrated control panel and built-in disc drive. 1 complete plasticizing system for thermoplastics with a screw diameter of 45 mm - Levels for the foundation of the Nolato machine - Hydraulic blockade of reverse rotation of the auger - Hydraulic auger drive with standard speed - SVO open nozzle in 2-piece design (nozzle body with screw-in nozzle). - A device for sorting good and defective parts. Pneumatic pendulum. Pendulum speed approx. 3 sec. Free-standing device under the machines discharge shaft. Including electrical standard connector and software (Pos. 42.42). - Single pneumatic valve on the movable mold clamping plate for the blowing function (1 piece of 3/2 separating valve with 1 magnetic coil). Control to choose between road/time or time/time. Possibility to manually set the flow using 1 thrott ...

grinding length: 600 mm grinding width: 230 mm workpiece height: 400 mm table surface area: 600 x 200 mm dimensions of grinding wheel: 250x25x51 mm feed: 1...24 m/min cross feed: 0,02 mm power capacity - grinding motor: 5 kW grinding spindle speeds: 800 - 4200 U/min weight of the machine ca.: ca. 2,3 t dimensions of the machine ca.: ca. 2,8 x 2,5 x 2,0 m Optical condition: good: Mechanic: good: The machine can be viewed under current.: # 2512 Switch-on hours 6273 h Machine is functional, but in delivery condition Accesories: Vogel central lubrication Optidress E device Wet grinding device with belt filter Dressing device Electric sine swivel magnet 400 x 175 mm Operation manual Machine is functionally tested and has an electrical test report! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1500 kN, 35 mm

warehouse no.: 503299 manufacturer: ARBURG type: Allrounder 520 S 1500-290 controller: Selogica year of construction: 2018 operation hours: 17400 h clamping force: 1500 kN distance between tie bars h:: 520 mm distance between tie bars v:: 520 mm size of mould plates h: 695 mm size of mould plates v: 695 mm min. mould height: 450 mm max. open daylight: 1025 mm opening stroke: 575 mm screw diameter: 35 mm swept volume: 144 ccm injection pressure: 2000 bar measures of machine lxbxh: 4.42m x 1.61m x 2.2m total weight: 5900KG equipment included: screen text german cascade control unit-interface pneu.6x core pulling hydraulically 2x machine without material hopper mould heating 12x

Parallel Lathe MULLER & PESANT Between points: 2500 mm Maxi Ø on bench: 520 mm Maxi Ø over saddle: 280 mm Maxi diameter in brocken bed: 700 mm Spindle diameter: Ø 56 mm Spindle speed: from 12,5 to 1000 RPM TRIPAN Turret 3-jaws chuck Ø 250 mm Tailstock CM4 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1600 mm Weight: approx 3,5 T

Dimensions & Weight Net weight with control cabinet [t] 7.69 Dimensions (LxWxH) [m] 4.48 x 1.5 x 2.2 Clamping unit Clamping force [kN] 1250 Dimensions of mounting plates (hxv) [mm] 805 x 770 Clearance between columns (hxv) [mm] 530 x 470 Min./ max. mould height [mm] min 300mm Injection Unit Screw diameter [mm] 45 Injection volume [cm3] 275 Injection weight [g] 250 Injection pressure [bar] 1878

Cycle-controlled lathe GILDEMEISTER NEF 520 With control MANUAL PLUS 4110 Year of construction: 2005 Spindle bore: 70 mm Center width: 1000 mm Circulation O above bed : 500 mm Circulation O over face slide: 290 mm Center height: 250 mm Speed range: 10 – 3050 rpm infinitely variable With the following accessories: Slide protection with interior lighting 8-speed Sauter Revolver VDI 30 30 VDI 30 tool holders 2 driven tools VDI 30 1 collet chuck Coolant system 3 jaw chuck Röhm 0 250 mm 19 set of soft jaw inserts ICP Contour Programming Tailstock with extendable drill quill Chip pan Operating instructions

turning diameter over bed: 500 mm turning diameter over slide rest: 1150 mm turning length: 1040 mm Control: total power requirement: 12 kW weight of the machine ca.: 3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Grinding length: 750 mm Grinding width: 250 mm Grinding headstock/ Drive power: 5 kW Table clamping surface: 720 x 200 mm Grinding height to center spindle: 500 mm Grinding wheel: 225/250 x 25 x 51 mm Max. table load: 100 kg Power supply: 3 phases, 400 V

Key data: 1500 kN, 487 g/PS

Arburg 520A-1500-800 (207) General information Item number: 207 Availability: In stock Year of construction: 2007 Brand: Arburg Specifications Spray weight: 487 g Clamping force: 1,500 kN Stand: Used Screw diameter: 60 mm Spray pressure: 1390 bar Tie bar spacing: 520 x 520 mm Clamping plate size: 700 x 700 mm Control: Selogica Power: 74 kW Operating hours: 63,600 h Weight: 7300 kg Dimensions: 6 m x 2.4 m Funnel: No

Kalenderstanze - Calender Punch Machine Renz Super 520 Year 1967 - Serial-No. 3659 -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

-Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

power capacity: 3 kW feed pressure: 10 bar liter capacity: 420 l7min intake capacity: 520 l/min 0: 270 l turning speeds: 800 U/min sound - pressure - turn off level ca. max.: 71 dB total power requirement: 3 / 0,35 kW weight of the machine ca.: 170 kg dimensions of the machine ca.: 1,6 x 0,5 x 1 m Electric 400 Volt: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pneumatic feeder with 2 air suction units Thermal oil sealed heating roller Cutting unit Sheets size : 530x750 – 220x220 mm Sheet weights : 130-350 g/m² Speed : 25 m/m (3700 sheets SRA3/hour – 1800 sheets B2/hour)

3.0 carrying capacity 150kg weight Suitable for Euro recording

3.0 carrying capacity 150kg weight Suitable for Euro recording

Shredder for green waste, roots, waste wood, reed wood, organic waste, biomass, bark, etc. Equipment: Radio, hydraulic travel drive, overbelt magnet, SPECIAL FEATURE: Both shredding shafts, basket carrier with bio-cutting unit, baskets, tools, large service renewed before 100 hours of operation original Komptech.

Screw diameter: 40 mm Calculated injection volume: 217 cm³ Length/diameter ratio: 23 L/D Pressure on the material: 2377 bars Nb Temperature zones: 5 N CLOSING UNIT Closing force: 1500 kN GENERAL Heating power: 13 kW Total installed power: 22 kW Oil quantity: 345 l. Dimension: (WxHxD) 4.47 x 2.19 x 1.51 m. Weight: 6400 Kg

Control Type: MC4 Number of hours: 37,121 H Closing force: 110 T Opening stroke: 600 mm Between columns: 470 x 470 mm Tray dimensions: 745 x 770 mm Mini/maxi mould: 300 mm Max gap between trays: 900 mm Injection: Screw diameter: 45 mm Screw length: 20 D cm3: 275 Bars: 1878 General: Motor power: 18.5KW Heating power: 13KW Closing weight: 6T Options: Cores: 2 Robot interface: YES Bi metal: YES Others: accumulators

heavy-duty thickness planer SCM S 520 Planing width 520 mm Planing height max. 250 mm Chip removal 3 - 8 mm Ribbed Steel Feed Roller Rubber pull-out roller 4-knife planer shaft, diameter 120 mm motorized height adjustment l mech. DIGITAL Feed rate 5 - 8 - 12 - 18 m/min. Machine is WORKSHOP OVERHAULED IN TOP CONDITION

Key data: 1500 kN, 141 g/PS, 35 mm

Arburg 520S-1500-400 (217) General information SKU: (217) Availability: In stock Year of construction: 2008 Brand: Arburg Specifications Spray weight: 141 g Clamping force: 1,500 kN Screw diameter: 35 mm Spray pressure: 2000 bar Tie bar spacing: 520 x 520 mm Clamping plate size: 688 x 688 mm Tool installation height min.: 250 mm Control: Selogica Language: English,German Power: 33.9 kW Hours: 45343 h Weight: 6490 kg Dimensions: 4.9 x 1.7 m Funnel: No Core Train: Yes Euromap: Yes Air Valve: Yes Heating cans: Yes C90fn8e

Description: With water bath Internal dimensions: 600 x 450 mm With 4 drawers Approx. Onsite Dimension. (l x w x h): 700 x 600 x 800 mm, weight approx.: 150 kg

Closing unit Clamping force [kN] 2000 Dimensions of mounting plates (hxv) [mm] 715 x 715 Clearance between columns (hxv) [mm] 520 min./ max. mold height [mm] 250 / 500 injection unit Screw diameter [mm] 55 Injection weight [g] 310 Injection pressure [bar] 1720 Dimensions and weight Net weight with control cabinet [t] 6.63 Dimensions (L x W x H) [m] 6.00 x 1.50 x 2.40

Closing unit Clamping force [kN] 1250 Dimensions of mounting plates (hxv) [mm] 805 x 770 Clearance between columns (hxv) [mm] 530 x 470 Min./max. mold height [mm] min. 300mm Injection unit Screw diameter [mm] 45 Injection volume [cm3] 275 Injection weight [g] 250 Injection pressure [bar] 1878 Dimensions and weight Net weight with control cabinet [t] 7.69 Dimensions (length x width x height) [m] 4.48 x 1.5 x 2.2

Dimensions and weight Net weight with control cabinet [t] 7.69 Dimensions (length x width x height) [m] 4.48 x 1.5 x 2.2 Closing unit Clamping force [kN] 1250 Dimensions of mounting plates (hxv) [mm] 805 x 770 Clearance between columns (hxv) [mm] 530 x 470 Min./max. mold height [mm] min. 300mm Injection unit Screw diameter [mm] 45 Injection volume [cm3] 275 Injection weight [g] 250 Injection pressure [bar] 1878