gem 520 used for sale

Plastic diaphragm valve, hand-operated GEMÜ Typ 677 15D 7715EO Z 880272107-00 DNDN 20 PN10 Installation dimensions: 110 mm material valve body: Polypropylene ( PP ) material diaphragm: PTFE new, with documents !; dimensions ( valve ): 145 x 90 x 125 mm Dimensions ( packaging ): 175 x 175 x 120 mm

Metal diaphragm valve, pneumatically actuated, closed at rest GEMÜ Type 615 15D 17345211/N 88066737-00 DN15 PN16 Installation dimensions: 110 mm Control pressure: 5,0 - 7.0 bar Valve body material: stainless steel (1.4435) diaphragm material: PTFE New, with documents ! Dimensions ( valve ): 110 x 70 x 105 mm Dimensions ( packaging ): 150 x 115 x 70 mm

Plastic diaphragm valve, pneumatically actuated GEMÜ Typ 630 25D 78711412/N 88242046-00 DN25 PN10 Installation dimensions: 120 mm Control pressure: 5,0 - 6.0 bar Valve body material: PP diaphragm material: EPDM Base plate: 132 x 71 x 15 mm hole spacing: 110 mm 2x bore: Ø 9.5 mm New ! Dimensions: 145 x 132 x 210 mm

Plastic diaphragm valve, pneumatically actuated GEMÜ Typ 630 32D 78711413/N 88278021-00 DN32 PN10 Installation dimension: 135 mm Control pressure: 5,5,0 - 6.0 bar Valve body material: PP diaphragm material: EPDM Base plate: 150 x 85 x 10 mm hole spacing: 125 mm 2x bore: Ø 9.5 mm New ! Dimensions: 165 x 150 x 280 mm

Plastic diaphragm valve, pneumatically actuated GEMÜ Typ 610 15D 7851411/N 88037717 DN15 PN6 Installation dimensions: 90 mm Control pressure: 5,0 - 7.0 bar Valve body material: PP diaphragm material: EPDM New Dimensions: 100 x 90 x 115 mm

Metal diaphragm valve, pneumatically actuated GEMÜ Typ 615 15D 1121321/N 88090958 DN15 PN6 Installation dimensions: 75 mm Control pressure: max. 5,5,5 bar Valve body material: Brass diaphragm material: EPDM New Dimensions ( valve ): 75 x 70 x 112 mm Dimensions ( packaging ): 150 x 100 x 85 mm

Plastic diaphragm valve, pneumatically actuated VENTIL- und MSR-TECHNIK Product no.: 401942 + 402435 + 400835 DN50 PN10 Installation dimensions: 185 mm Position sensor: GEMÜ 1231 Valve body material: PP Diaphragm material: FPM 4x threaded bore: M8 x 1.25 hole spacing: 45 mm New ! Dimensions: 245 x 145 x 390 mm

Plastic diaphragm valve, pneumatically actuated GEMÜ Typ 690 25D 7711411/N 88072419 4758987 DN25 DA32 PN10 Installation dimensions: 117 mm Control pressure: 5,5 - 7.0 bar valve body material: PP diaphragm material: EPDM mint ! Dimensions: 146 x 128 x 262 mm

Plastic diaphragm valve, pneumatically actuated GEMÜ Typ 690 32D 7711412/N 88052558 4758988 DN32 DA40 PN10 Installation dimension: 135 mm Control pressure: 5,5 - 7.0 bar Valve body material: PP diaphragm material: EPDM mint ! Dimensions: 175 x 160 x 330 mm

Plastic diaphragm valve, pneumatically actuated GEMÜ Typ 690 25D 7711411/N 88072419 47858983 DN25 DA32 PN10 Installation dimensions: 117 mm Control pressure: 5,, 5 - 7.0 bar Valve body material: PP diaphragm material: EPDM mint ! Dimensions: 146 x 128 x 233 mm

Plastic diaphragm valve, pneumatically actuated GEMÜ Typ 690 15D 7711411/N 88072417 47858986 DN15 DA20 PN10 Installation dimensions: 109 mm Control pressure: 5,5 - 7.0 bar Valve body material: PP diaphragm material: EPDM mint ! Dimensions: 146 x 128 x 233 mm

Plastic diaphragm valve, pneumatically actuated GEMÜ Typ 690 32D 7711412/N 88052558 4758984 DN32 DA40 PN10 Installation dimensions: 135 mm Control pressure: 5,5 - 7.0 bar Valve body material: PP diaphragm material: EPDM mint ! Dimensions: 175 x 160 x 270 mm

Plastic diaphragm valve, manually operated GEMÜ Typ 677 25D 771140 88072076 582850 DN25 DA32 PN10 installation dimensions: 116 mm valve body material: PP diaphragm material: EPDM as good as new Dimensions: 116 x 85 x 130 mm

Plastic diaphragm valve, pneumatically actuated GEMÜ DN65 DA75 PN10 Installation dimensions: 305 mm closed in rest position used, tested ! Dimensions: 420 x 305 x 260 mm

Inv. Num. : 6900 Type:- Producer: Gema ITW Generated:- Parameters: Weight: 1200 kg The center consists of the following parts: Manipulator 2x (working height 2100mm) Automatic guns 6x Peristatic pump under cyclone Control for 6 automatic guns Switchboard

Measurement data acquisition device, test device, telemetry system, Can-Bus monitoring -Gemac: CANobserver -Art.Nr.: 22550-00 -Number: 1 pieces -Dimensions: 115/50/H125 mm -Weight: 0.5 kg

Diaphragm valve, pneumatically actuated GEMÜ Type 610 61015D78 51411/N DN 15 PN 6 control pressure: 5,5 - 7.0 bar Diaphragm material: EPDM housing material: PP used, tested ! Dimensions: 90 x 90 x 130 mm

Ball valve, ball valve internal thread, metal ball valve -Manufacturer: GEMÜ, 2/2-way metal ball valve stainless steel, unused in original packaging -Type: B20 20D 137 SL Item No.: 88613077 -Size: DN20 3/4 -Pressure: PN63 63 bar -Hand lever: lockable -Quantity: 7x ball valve available -Price per piece -Dimensions of cardboard: 180/100/H50 mm -Weight: 0.6 kg/pc.

Ball valve, ball valve internal thread, metal ball valve -Manufacturer: GEMÜ, 2/2-way metal ball valve stainless steel, unused in original packaging -Type: B20 25D 137 SL Item No.: 88613078 -Size: DN25 1 -Pressure: PN63 63 bar -Hand lever: lockable -Quantity: 6x ball valve available -Price per piece -Dimensions of box: 195/120/H60 mm -Weight: 0.9 kg/pc.

Key data: 700 mm, 2000 mm, 1600 1/min

Machine Details Stock number 1105-03980 Machine Type: CNC Lathe Make GEMINIS Type GHT 4 G2 X 700 X 2000 Year of construction 2006 CNC control type Control FAGOR TC 8055 Storage location FRANCE Country of origin Delivery time immediately Freight base from location Price Technical details Turning diameter 720 mm Turning length 2000 mm Control FAGOR TC 8055 Spindle diameter 104 mm Turning diameter over carriage 470 Speed 0 - 1600 m/min Voltage 400 V Machine weight approx. 7 t Information CNC FAGOR 8055 TC

Hello everyone for sale are approx. 500 lfd. Meter Gemac shelving. 6 floors/field/depth 1,200 mm. We are also happy to do this in partial quantities. Shipping and assembly can be arranged!

General SKU231U212 LocationBarneveld MakeGemco TypeMemcomatio Solids: Double Cone No.B-85379 Year of construction1985 Main Features MaterialStainless steel Volume850 Ltr. Motor3 KW Specified Features - Tumbler mixer MaterialStainless steel 1.4306 (304L) Double cone tumbler mixercheck Capacity850Ltr. Diameter1400mm Length/Depth1500mm Cylindrical length480mm Conical length500mm (2x) InletDia: 460mm OutletDia: 200mm With motor3kW, 230/400 Volt, 2870rpm Information Mounted on mild steel framecheck With switchcheck With switchgearcheck(as is) Weight1800kg Floorspace2,7x1,6m Total height3mTumbler mixersGemcoMixers > Tumbler mixersBrand > Gemco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlan ...

General SKU018X226 LocationBarneveld Year of constructionunknown Main Features MaterialStainless steel Number of1 heads Dosing1000 ml Specified Features - Piston filler MaterialStainless steel Piston filler(1x) Dosing± 250/500/1000 Ml Number of pistons:1 Number of filling heads:1 Pneumatically operatedcheck With hopper(Capacity approx. 20 Ltr) Mounted on framecheck With switchcheck Floorspace1,2x0,6 M Total height2,0 M Information Weight100 KGPiston fillersGemini TechniekPackaging machines > Piston fillersBrand > Gemini Techniek What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Distance between centers: 6000 mm Height centers: 800 mm Max swing over bed: 1600 mm Max swing over slide: 1225 mm Main spindle hole diam: 150 mm Speed range: 4 Speed ​​range I: 0-90 rpm Speed ​​range II: 0-180 rpm Speed ​​range III: 0-355 rpm Speed ​​range IV: 0-710 rpm Cross slide travel: 830 mm Quill diameter: 320 mm Quill travel: 250 mm Equipped with: Control: Siemens Sinumerik 840 D Shop Turn 4 independent jaw chuck: Ø 1400 mm 4 independent jaw chuck: Ø 560 mm Square Auto Turret: SAUTER 4 pos - Ø 320x320 mm Tailstock and quill: motorized Chip conveyor: Yes 1 steady rest: Ø 100-500 mm 1 steady rest: Ø 500-900 mm

Description: Serial number: 13201.12084 Approx. Onsite Dimension. (l x w x h): 750 x 500 x 1,200 mm, weight approx.: 200 kg

turning diameter: 470 mm turning length: 720 mm control: FAGOR 8055 TC/B centre height: 366 mm dist. between centers: 3000 mm c-axis: 0 Drive tool: feed speeds: 8.000 mm/min main spindle bore: 92 mm spindle nose: DIN-55027-11 spindle diameter in front bearing: 150 mm spindle rate: 0-1600 Spindle power: 17/20,5 max. torque on the spindle: 1590/1920 quill:: 100 mm tail stock: 200 mm taper: Morse 6 : Sauter VCI50 Ø400 mm. bed width: 430 mm total power requirement: 28 kW weight of the machine ca.: 5.700 kg dimensions of the machine ca.: 6.800 x2.385 x1.765 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cantilever rack, heavy duty rack -Manufacturer: Gemac, cantilever rack base field double-sided -Cantilevers: 5 per side -Compartment height: 33 cm -perm. Load: 200 kg per cantilever arm / 1000 kg total. see nameplate -Quantity: 12x shelves available -Price per piece -Dimension: 1315/1210/H2000 mm -Weight: 98 kg/piece

Description: Including multifix swivel steel holder B , Accessory cabinet Contents: turning steel holder, collets with quick-clamping device Drehlänge: 900 mm, turning diameter over bed: 300 mm, turning diameter over slide: 140 mm, weight approx.: 950 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 900 x 1,400 mm

Shelf Shelving System Spare Parts Warehouse High Rack, Storage Rack, Industrial Rack Used Manufacturer: GEMAC Spare parts warehouse over 3 walk-in levels with floors, elevator and office space approx. 25000 sheet metal shelves each approx. 400 x 1100 mm Shelf load: 80 kg Load max: 500 kg Field width: approx. 1100 mm Depth: approx. 400 and 800 mm Shelf height approx. 1800 mm The plant is currently being dismantled

Vegetable cutter, make Kronen, type KG - 203, year 2017, Suitable for soft and sensitive as well as hard products,, with ​3 speeds 250/350/450 rpm. -, with fine-cut disc 2 mm stainless steel,, was in action for peeled ginger bulbs,, Output: approx. 9 kg / min., - Entirely made of high quality stainless steel, - No aluminum or plastic, - All attachments can be easily removed and cleaned in the dishwasher, - Full moon shaped large hopper - less pre-cutting, - Built-in long vegetable chute, - Stainless steel cutting tools, - Processes up to 900 portions per day or 9 kg per minute, Dimensions / weight: W x H x D: 416 x 603 x 680 mm, 68 kg, bowl contents: 17.5 liters

weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 850 x 750 x 1,500 mm

Key data: 720 mm, 3000 mm

CNC Cycle Lathe, Geminis, CNC 4 Plus 720/3000 Control: Fagor 800T CNC Lace width. : 3000mm, diameter over carriage 470mm, spindle bore: 80mm Speed range: 0- 1600rpm, Accessories: 3-jaw chuck, 4-jaw chuck, face plate, Multifix tool changer with inserts, chip conveyor, 2 steady rests The machine can be viewed under power!

Sensor, probe, immersion probe, float switch, magnetic switch, magnetic float switch, level switch -Manufacturer: IMO GEMS, single point level switch unused Ovp -Type: LS-1900 -Temperature sensor: IMO PT100 -Number: 2x sensor available -Price per piece -Dimensions box: 85/65/H100 mm -Weight: 0.2 kg

diameter: verschiedene mm condition: teilweise ohne Verpackung weight: ca. 1,4 t : . : 2,20 Euro /kg Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year: 2012 - technically efficient, ready to work - after full service - spindle 7 kW - axis movement range: X – 3500 mm, Y – 400 mm, Z – 300 mm - pneumatic rotary table A: -90° / 0° / +90° - 4 pneumatic clamps - magazine for 7 tools (SK 30 holder) - automatic quick tool change system - cooling and lubrication installation - operator panel, Windows system with online access - protective cabin - weight 2850 kg, dimensions: 4500 x 2100 x 2100 mm

Description: 280 - 510 mm Maximum 520 mm Approx. Onsite Dimension. (l x w x h): 660 x 320 x 50 mm, weight approx.: 5 kg

Centrifugal fans, centrifugal blowers, radial high-pressure fans with belt drive ELEKTROR Karl W. Müller Type: HRD 2/4 T Speed fan wheel: max. 5200 rpm Fan diameter: Ø 350 mm Induction: Ø 110 mm Output: Ø 10 mm Motor : no nameplate ! approx. 3.0 kW tested with 380 V 3 AC 50 Hz used, tested ! Dimensions: 600 x 520 x 600 mm

Center mounting, center mounting for rodless cylinders REXROTH MECHMAN 520 640 100 2 for piston diameter: Ø 63 mm New ! Dimensions: 150 x 75 x 40 mm

Center mounting, center mounting for rodless cylinders REXROTH MECHMAN 520 630 100 2 ( 5206301002 ) for piston diameter: Ø 50 mm New ! Dimensions: 112 x 60 x 30 mm

Pneumatic cylinder REXROTH 520 692 008 G 1/8 ISO 228/1 P max 10 bar Ø 25 x 200 Dimensions 50x8x8 cm

Replacement diaphragm SAMSON 520-0943 Diaphragm 40 cm² New ! Dimensions ( packaging ): 215 x 165 x 75 mm

Replacement diaphragm SAMSON 520-1211 Diaphragm 80 cm² New ! Dimensions ( Packaging ): 215 x 165 x 75 mm

Replacement diaphragm SAMSON 520-0976 Diaphragm 700 cm² New ! Dimensions ( packaging ): 260 x 210 x 130 mm

Replacement diaphragm SAMSON 520-0985 Diaphragm 350 cm² New ! Dimensions ( packaging ): 260 x 210 x 130 mm

Replacement diaphragm SAMSON 520-0984 Diaphragm 240 cm² New ! Dimensions ( packaging ): 265 x 100 x 140 mm

T-connector, T-connector, 7 pieces REXROTH 3 842 520 802 ( 3842520802 ) profile: 45 x 45 mm New ! Dimensions ( T-connector ): 45 x 45 x 15 mm Dimensions ( packaging ): 120 x 120 x 125 mm

Steel belt unwinding device, unwinding trolley PAGUS Ø 520 x 20 mm for 20 mm wide metal strapping Roll width: max. 20 mm Roller outer diameter: max. Ø 520 mm 2 Solid rubber wheels: Ø 150 x 35 mm Stabilizing plate: 320 x 100 x 10 mm lacquered version used, tested ! Dimensions: 730 x 320 x 420 mm

Plasma cutter SAF nertaZIP 520 04808 - 2300 Cutting capacity: max 20 mm 3~ 220 / 380 V Cutting gun with 5 m cable Dimensions: 500 x 750 x 1000 mm

Clamping angle PAGUS 700 x 520 x 390 mm Clamping area 1: 700 x 520 mm Material thickness: 29 mm Clamping surface 2: 700 x 390 mm Material thickness: 29 mm used, tested ! Dimensions: 700 x 390 x 620 mm

Support trestle PAGUS 300 - 520 mm Support height: 300 - 520 mm, adjustable in 5 steps ( 300 / 350 / 410 / 470 / 520 mm ) Support surface: 100 x 60 mm used, tested ! Dimensions: 300 x 290 x 300 mm