geared used for sale

Trough screw, washing screw, screw conveyor used Conveying length: approx. 6500 mm Diameter: approx. 700 mm Slope: approx. 400 mm Wing height: approx. 210 mm Wing thickness approx. 4 mm Stainless steel Geared motor SEW 3 kW 22 rpm 220/400 V Dimensions approx. 7800 x 1800 x 1800 mm The screw can be converted according to your wishes by our own special machine construction. All articles are checked for function before delivery, if technically possible! Changes and errors in the technical data, information and prices as well as prior sale reserved.

Portal straightening press with 300 T capacity a) No-load and pressing speed up to 17 mm/sec b) Opening speed up to 55 mm/sec c) Table size 2500x1600mm d) Open height 700 mm e) Total size approx. LBH 4500 x 2300 x 3700 mm f) OIL temperature display on the tank g) Lubrication via lubrication nipples h) Table in grid construction, with T grooves according to customer requirements, otherwise 22mm i) Operation on swivel arm, mounted on the bridge j) Pressure setting from 50 T to 300 Tvia MONITOR k) Bridge moves through two geared motors, over racks l) Cylinder moves to the left and right over racks m) Machine body double painted n) Cylinder induction hardened Design Press type PORTALPRESSE Thermally neutral 80 – 120 °C Number of operating pages 3 pages Forces Pressing force max. 3,000 kN Free tearing force max. 500 kN Pressure build-up time Closed tool St ...

2-way geared in-line drilling machine make WEBO type Varia 20Fabr. -No: 20/14/1 and 20/13/6Technical specifications:Drilling capacity approx. 30 mmSpindle mount: MK 330 spindle speeds: 103 - 1450 rpmDistance spindle nose table: 100 - 600 mmProjection: 260 mmSpindle stroke: 150 mmFeeds: 0.1 - 0.3 mm / rev:Table size with / without channel: 100 x 500/800 x 350 mmT-slots in the table: 18 mmExternal dimensions L x W x H: 1000 x 900 x 2600 mmWeight approx: 1800 kgWith- Right-left run- Table height adjustable via crank- Drill heads height adjustable via crankused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Heavy 4-fold geared in-line drilling machine make WMW Saalfeld type BKR 20 x 4 AIFabr. -No: 08712-15Technical specifications:Drilling capacity in steel: 25 - 30 mmSpindle mount: MK 38 spindle speeds: 180 - 2000 rpm.4 automatic feeds: 0.08 - 0.32 mm / revQuill stroke: 140 mmTable size: 1800 x 350 mmProjection: 275 mmDrive power: 2 kWtotal connected load: 8 kWDimensions L x W x H: 2350 x 920 x 2350 mmWeight approx: 2480 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Helical geared motor / motor Manufacturer: SEW-USOCOME Type: RF57 DT90L4 Quantity in stock: 2 Turnover y/min : 1410/95 Transmission: 15 Power (kW): 1.5 Product Id: 1

Angle conveyor (roller-chain) - galvanized rollers - stainless steel chain - working length of the roll: 730 mm - roll diameter: 50 mm - lifting on chains: B08-1 - spacing between chains: 145 mm - number of chains: 5 - construction: stainless steel - includes 2 geared motors: - for rollers – SEWUSOCOME; 0.25 kW; 1300/77 rpm - for chains – SEWEURODRIVE; 0.25 kW, 1300/77 rpm

Technical data PaperSpike 2 G: Manufacturer Grumbach und Petermann GmbH Type 2500 Year of construction 2019 Dimensions accelerator belt 3,000 x 2,980 x 600 mm (l x w x h) Weight 1,100 kg Dimensions PaperSpike sorting unit 2,480 x 2,982 x 1,805 mm (l x w x h) Weight 3,100 kg Dimensions PaperSpike 2G complete 5,450 x 3,480 x 1,805 mm (l x w x h) Weight 4,600 kg Dimensions paper discharge conveyor 3,400 x 1,200 x 650 mm (l x w x h) Weight 400 kg Electrical equipment of the entire system: Voltage 380 - 420 V Connected load 9.5 kW Current consumption 20.34 A Operating principle: The material is fed in as dry and thin a layer as possible, preferably a monolayer, evenly over the entire width on the accelerator belt. The sorting roller with the spikes pulls the mixed paper from the chute, while cardboard boxes are impaled and held by the spikes. Material (paper) with low stiffness (newspapers, m ...

sheet width: 1550 mm plate thickness: 3 mm distance between columns: 1600 mm back stop - adjustable: 600 mm connected load: 3 kW weight of the machine ca.: 1,1 t dimensions: 2,06 x 2,14 x 1,21 m Demonstration machine with small paint damage. The machine works quietly and is powered by its geared motor Braking system energy-saving. Our machine is welded as a monobloc body from ST42 quality material. The knives of the machine are of 2379 quality and the brand name is BOHLER. These high-quality knives guarantee precise cutting. Emergency stop button, foot switch and finger guard are included standard equipment. (Documentation in English only) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 27500 € : 508.75 € : 5000x34x1,1 mm : 20-100 m/min : 360 mm : 360 mm : 640x360 mm : rund 360 mm, quadrat 360 : rund 310 mm, quadrat 270 : rund 360 mm, quadrat 360 : 800 mm : 0.12 kW : 3 kW : 3000 mm : 1200 mm : 1910 mm : 1635 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH (sample photo - roller table see photo - optio ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 51200 € : 936.96 € : 6800x41x1,3 mm : 20-100 m/min : 560 mm : 540 mm : 820x540 mm : rund 550 mm, quadrat 540 : rund 360 mm, quadrat 360 : rund 550 mm, quadrat 540 : 880 mm : 0.12 kW : 0.37 kW : 4 kW : 3800 mm : 1750 mm : 2350 mm : 3200 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH (roller table see photo - optional a ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 78800 € : 1442.04 € : 8400x54x1,6 mm : 20-100 m/min : 650 mm : 600 mm : 1000x600 mm : rund 650 mm, quadrat 600 : rund 440 mm, quadrat 440 : rund 650 mm, quadrat 600 : 880 mm : 0.12 kW : 0.37 kW : 7.5 kW : 4750 mm : 1970 mm : 2630 mm : 6520 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH The data for this ad was create ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 44100 € : 815.85 € : 6800x41x1,3 mm : 20-100 m/min : 560 mm : 540 mm : 820x540 mm : rund 550 mm, quadrat 540 : rund 360 mm, quadrat 360 : rund 550 mm, quadrat 540 : 880 mm : 0.12 kW : 4 kW : 3800 mm : 1750 mm : 2350 mm : 3200 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH (roller table see photo - optional available,  ...

sheet width: 2000 mm plate thickness: 8,0 mm max. plate thickness: 8,0 mm anbiegen roll diam. toproll: 240 mm roll diam. bottom roll: 240 mm side roll diameter: 240 mm work height max.: ca. 1100 mm work speed: 6,5 m/min voltage: 400 V total power requirement: 11,0 kW weight: 4910 kg range L-W-H: 4000 x 1300 x 1600 mm Furnishing: - robust 3-roller bending machine with asymmetrical roller arrangement - free-moving operation - analogue position display for rollers (scale) - Fixed top roller - manual infeed of the bottom roller, using handwheels with scales - electrically adjustable side roller An inclined position is possible by pushing out a coupling Inclination for bending tapered tubes Adjustment takes place via a geared motor - driven upper and lower roller Side roller runs as a drag roller - original instruction manual + machine card The data for this ad was created with ModulMW ...

sheet width: 2000 mm plate thickness: 8,00 mm max. plate thickness: 8,00 mm anbiegen roll diam. toproll: 240 mm roll diam. bottom roll: 240 mm side roll diameter: 240 mm work height max.: ca. 1100 mm work speed: 6,5 m/min voltage: 400 V total power requirement: 11,0 kW weight: 4910 kg range L-W-H: 4000 x 1300 x 1600 mm Furnishing: - robust 3-roller bending machine with asymmetrical roller arrangement - free-moving operation - analogue position display for rollers (scale) - Fixed top roller - manual infeed of the bottom roller, using handwheels with scales - electrically adjustable side roller An inclined position is possible by pushing out a coupling Inclination for bending tapered tubes Adjustment takes place via a geared motor - driven upper and lower roller Side roller runs as a drag roller - original instruction manual + machine card The data for this ad was created with Modul ...

Old Lodige KM 1200 D continuous mixer with ploughshares (year 1977) transformed into a mixer-dryer (year 2017) by the previous user. Modification made : New enclosure / mixing chamber in stainless steel 316. Change of motor transmission: belt -> geared motor Main material: 316 stainless steel Year: 2017 Type of drying: hot air blowing Without electrical cabinet With piping 1 - Ploughshare mixer 1200 L Motor manufacturer: SEW Power : 18,5 KW Material: 316 stainless steel + 2 manual butterfly valves + 2 manual Orbinox knife gate valves Porthole interior view Safety box suppression (brand : Vigilex) No manufacturers plate 2 - Fan n?1 Manufacturer: Kiekens Model: 8 KTEN 355 Year : 2017 Volume: 1204 m3 / H Power : 15 KW Temperature : 80?C Atex : yes Ex II 3D/G td nA 3 - Fan n?2 Manufacturer: Kiekens Model : 8 KTEN 28 ...

: neu : ca. 4 Monate ab Auftragse : Türkei : 32600 € : 658.52 € : 6000x41x1,3 mm : 20-100 m/min : 540 mm : 540 mm : 750x540 mm : rund 510 mm, quadrat 450 : rund 270 mm, quadrat 250 : 695 mm : 0.12 kW : 4 kW : 3000 mm : 1300 mm : 2150 mm : 2445 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment hydraulic uplift of sawing frame 3° inclined saw band user manual in GERMAN or ENGLISH (the vertical hydraulic clamping shown on the photos ...

Conveyor belt, trough conveyor, trough conveyor GASUS type DG 300-5/2.75 Belt conveyor, conveyor belt, belt conveyor Fabrig No: D-7321915 Year of construction 1996 Usable length: 2.75 meters Belt width: 230/300 mm Deflection roller diameter: 210 / 230 mm (rubberized drive roller )Pulley width: 400 mm Belt speed: approx. 15 meters /min. Motor power: 0.75 kW Mains connection: 400 volts, 50 Hz - Drive via SEW Geared motor inlet hopper 550 x 430 mm- Metal rollers with maintenance-free ball bearings - Belt tension adjustable via threaded spindles- Rubber conveyor belt with corrugated edge - Conveyor belt has grooves - stable frame made of sheet steel- for horizontal or slightly rising transport of bulk materials Overall dimensions L x W x H: 3000 x 950 x 700 mm Weight: 400 kg good condition; used

Conveyor belt Length: 5.80 m, width: 0.65 m. Geared motor: 0.55 kw. Cold air tunnel and air cooling equipment with 2 compressors and radiators.

bore capacity in steel (diameter): 40 mm throat: 297 mm bore stroke: 120 mm speeds: 8 / 75 - 1600 U/min table-size: 500 x 460 mm spindle taper: MK 4 column diameter: 115 mm spindle feeds:: 3 / 0,1 - 0,26 mm/U distance spindle /table: 715 mm distance spindle/base plate: 1180 mm engine output: 1,5 kW table rotating: 360 Grad weight of the machine ca.: 335 kg dimensions of the machine ca.: 0,5 x 0,76 x 1,89 m Electric 380 Volt: Cooling pump in machine base: Machinelight: Heavy geared boring machine with digital display for speed and drilling depth, hardened gears, thick-walled column, large table and base plate with T-slots, motorized table adjustment, electromagnetic feed engagement by means of snaps on the control lever. Machine not much used from the demonstration area. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution  ...

sheet width: 2050 mm plate thickness: 2 mm strokes per minute until: 38 cutting angle: 1,75 ° table height over floor: 870 mm total power requirement: 3 kW weight of the machine ca.: 1520 kg range L-W-H: 2,2 x 0,6 x 1,2 m Electric 380 Volt: Back stop with manual adjustment: Shadow line lighting: Foot switch: The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the rubber-covered blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emerge ...

Vertical mixing silo. Approximate capacity 56 m3, dimensions Ø3.590x8.370 mm of total height. Made of steel S-235 and built in sheet thickness 3 mm with perimeter rings of reinforcement UPN-80, support structure by means of 4 pillars HEA180 mm braced with HEA-120 profiles, inner thread of Ø300 mm, step 200 mm with shaft tube of 114.3x6.02 mm placed in tube-jacket of Ø 355x4,78 mm, registration on the side for visit and inspection and in the lower tube for emptying in case of jamming or breakdown, equipped with safety system, 4 inspection sights, two upper ventilation vents, maximum level indicator FILSA type MS-1, transmission by pulleys and belts with 22 kW motor at 1,000 rpm with safety protections, discharge pipe 200x200 mm connected to inner screw jacket of mixer with manual closure at the outlet mouth, Nozzle at the bottom of cone for complete emptying of machine, cat ladder with ...

TECHNICAL SPECIFICATIONS Manufacturer: THYSSEN KRUPP Fördertechnick Description: Chain conveyor, scraper conveyor Type: OTK 440/1200x9408 Design: stationary, heavy version Year of construction: 2001 Drive type: slip-on geared motor, planetary gear Drive power: 55 kW Length chain conveyor: 9,400 mm Chain conveyor width: 1,200 mm

sheet width: 2050 mm plate thickness: 3 mm strokes per minute until: 35 cutting angle: 2,0 ° table height over floor: 870 mm thickness at Niro-steel: 2 mm total power requirement: 4 kW weight of the machine ca.: 1550 kg range L-W-H: 2,5 x 1,57 x 1,21 m Electric 380 Volt: The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the rubber-covered blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and ...

Sell a conveyor belt from Fördertechnik und Maschinenbau Dip Ing Günther Röwe GmbH that is no longer needed. Strip widths 260mm Length 800mm Drive SEW geared motor I 60:1 VMIN 890/15 Kw 0,18 Nm 48

: neu : ca. 4 Monate ab Auftragse : Türkei : 44300 € : 8200x41x1,3 mm : 20-100 m/min : 810 mm : 750 mm : 910x750 mm : rund 600 mm, quadrat 600 : rund 360 mm, quadrat 360 : 725 mm : 0.12 kW : 4 kW : 4020 mm : 1600 mm : 2450 mm : 3970 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

Assembly star, assembly table, workbench, welding table, clamping plate, gluing press, gluing star, glue press, gluing stand rotating device, container rotating device, welding rotating device -Cube size: 750 x 750 mm -Working width: 750 x 4000 mm -Geared motor: 0.18 kW -pneumatic disc brake -Foot switch -Dimensions: 5250/1100/H2750 mm -Weight: approx. 800 kg

Offer 23093 Specifications: - Load capacity 2000 kg - Face plate diameter 1300 mm - Face plate can be swivelled up to 135 ° via geared motor - Rotary movement electr. infinitely variable - Footswitch for right-hand rotation - left-hand rotation - Welding current transmission 650 A - Drive 400 V - Table height in horizontal position 1360 mm - Space requirement approx. W 1600 x D 2200 x H 1360 mm - Weight approx. 2.0 t

Offer 23207 Specifications: - Load capacity 2500 kg - Face plate dimensions 750 x 750 mm - Face plate can be swivelled up to 135 ° via geared motor - Rotary movement electr. infinitely variable - Footswitch for right-hand rotation - left-hand rotation - Welding current transmission 650 A - Drive 400 V - Table height in horizontal position 1090 mm - Space requirement approx. W 1150 x D 1250 x H 1090 mm - Weight approx. 1.2 t

Three-phase electric motor, gearbox replacement motor HIMMELWERK 112D6G132M5,5 5.5 kW approx. 1400 rpm 380 V 3AC IP 33 gear diameter: Ø 42 mm, 24 teeth flange: approx. 370 x 300 mm Replacement motor for HIMMELWERK geared motor 112D6G132M5, 5 used, checked ! Dimensions: 790 x 370 x 320 mm

Geared motor, three-phase motor with gearbox LENZE SSN31-1MHAR i = 20 hollow shaft diameter: Ø 15 mm flange diameter (drive): Ø 62 mm Flange diameter (output): Ø 63 mm used, tested ! Dimensions: 80 x 65 x 102 mm

Geared motor with brake SEW, VECTOR ANTRIEBSTECHNIK ROTTERDAM SSG4W D112M-4-BS-HL ( SSG4WD112M-4-BS-HL ) 4,0 kW 84 rpm 220 / 380 V 3AC IP44 Shaft diameter: Ø 45 mm Wavelength: 90 mm groove width: 14 mm Motor foot 1: 185 x 185 mm hole spacing ( parallel to shaft ): 150 mm hole spacing ( transverse to shaft ): 135 mm Motor foot 2: 185 x 215 mm hole spacing ( parallel to shaft ): 150 mm hole spacing ( transverse to shaft ): 135 mm hole diameter: Ø 18 mm New ! Dimensions: 700 x 290 x 290 mm

Agitator motor, geared motor, with mounting plate GEPPERT RÜHRTECHNIK GmbH LRE 52/11.0-3 Gear motor: GETRIEBEBAU NORD Type SK9042.1AFH-160M/4 Motor: Type SK 160 M/4 ( SK160M/4 ) 11,0 kW 52 rpm 400 / 690 V 3AC 50Hz IP 55 Shaft diameter: Ø 100 mm, Shaft length: 290 mm Flange diameter (for agitator): Ø 128 / 198 mm x 38 mm bolt circle diameter: Ø 162 mm, 8x hole diameter: Ø 22 mm mounting plate: 520 x 520 x 20 mm hole spacing: 450 mm 4x hole diameter: Ø 25 mm used, tested ! Dimensions: 1020 x 900 x 400 mm

Servo motor with gearbox and brake, geared motor, permanent magnet motor BAUMÜLLER DSG 56-M ( DSG56-M ) 2,35 kW 4000 rpm 5.5 A IP64 / 65 Transmission: SPN Type: U35 Article number: 057403 i: 6,5 Shaft diameter: Ø 28 mm Wavelength: 50 mm Flange diameter: Ø 72 / 110 mm bolt circle diameter: Ø 90 mm 6x threaded hole: M8 x 1.25, depth: 20 mm used, tested ! Dimensions: 450 x 115 x 160 mm

Servo motor with gearbox and brake, geared motor, permanent magnet motor BAUMÜLLER DSG 71-K ( DSG71-K ) 3,4 kW 4000 rpm 8.3 A IP64 / 65 Transmission: SPN Type: U36 Article number: 058347 i: 7 Shaft diameter: Ø 28 mm Wavelength: 50 mm Flange diameter: Ø 95 / 110 x 110 mm bolt circle diameter: Ø 115 mm 4x threaded hole: M8 x 1.25 used, tested ! Dimensions: 490 x 150 x 190 mm

Servo motor with gearbox and brake, geared motor, permanent magnet motor BAUMÜLLER DSG 71-M ( DSG71-M ) 4,3 kW 4000 rpm 15.8 A IP64 / 65 Transmission: SPN Type: U36 Article number: 058347 i: 7 Shaft diameter: Ø 28 mm Wavelength: 50 mm Flange diameter: Ø 95 / 110 x 110 mm bolt circle diameter: Ø 115 mm 4x threaded hole: M8 x 1.25 used, tested ! Dimensions: 590 x 150 x 190 mm

Geared motor with brake and inverter SEW-Eurodrive WA20/T DRS71S4BE05/MM05/AMA6 ( WA20/TDRS71S4BE05/MM05/AMA6 ) MOVIMOT MM05D-503-00 0,55 / 0,055 kW 283 rpm 380 - 500 V 3AC 50 - 60 Hz IP54 Hollow shaft diameter: Ø 20 mm wavelength: 100 mm groove width: 6 mm 2x flange: diameter Ø 62 / 55 mm bolt circle diameter: Ø 70 mm 4x threaded hole: M6 x 1,0, Depth: 18 mm 2x Gear foot: 90 x 80 mm hole spacing (parallel to shaft): 90 mm hole spacing ( transverse to shaft ): 75 mm hole diameter: Ø 6.5 mm used, tested ! Dimensions: 380 x 195 x 255 mm

Geared motor with brake and inverter SEW-Eurodrive WA20/T DT71D4/BMG/MM05/RJ1A/AND3/AZSK ( WA20/TDT71D4/BMG/MM05/RJ1A/AND3/AZSK ) MOVIMOT MM05C-503-00 0,055 / 0,55 kW 28 - 283 rpm 380 - 500 V 3AC 50 / 60 Hz IP54 Hollow shaft diameter: Ø 20 mm Shaft length: 100 mm Groove width: 6 mm 2x Flange: diameter Ø 62 / 55 mm bolt circle diameter: Ø 70 mm 4x threaded bore: M6 x 1,0, depth: 18 mm 2x gear foot: 90 x 80 mm hole spacing (parallel to shaft): 90 mm hole spacing (transverse to shaft): 75 mm hole diameter: Ø 6.5 mm See also GM1140, GM1141 and GM1149 ! used, tested ! Dimensions: 380 x 175 x 260 mm

Geared motor with brake and inverter SEW-Eurodrive WA20/T DT71D4/BMG ( WA20/TDT71D4/BMG ) MOVIMOT MM05C-503-00 0,0,37 kW 135 rpm 230 / 400 V 3AC 50 Hz IP54 Hollow shaft diameter: Ø 20 mm wavelength: 100 mm groove width: 6 mm 2x flange: diameter Ø 62 / 55 mm bolt circle diameter: Ø 70 mm 4x threaded hole: M6 x 1,0, depth: 18 mm 2x gear foot: 90 x 80 mm hole spacing (parallel to shaft): 90 mm hole spacing ( transverse to shaft ): 75 mm hole diameter: Ø 6.5 mm used, tested ! Dimensions: 380 x 180 x 260 mm

Geared motor with inverter SEW-Eurodrive WA20/T DT71D4/MM03/BW1 ( WA20/T DT71D4/MM03/BW1 ) MOVIMOT MM03C-503-00 0,075 / 0,37 kW 2 - 36 rpm 380 - 500 V 3AC 50 / 60 Hz IP54 Hollow shaft diameter: Ø 20 mm Wavelength: 100 mm groove width: 6 mm 2x flange: diameter Ø 62 / 55 mm bolt circle diameter: Ø 70 mm 4x threaded hole: M6 x 1,0, Depth: 18 mm 2x Gear foot: 90 x 80 mm hole spacing (parallel to shaft): 90 mm hole spacing ( transverse to shaft ): 75 mm hole diameter: Ø 6.5 mm used, tested ! Dimensions: 315 x 180 x 235 mm

Geared motor with brake, absolute encoder and forced fan SEW-Eurodrive WA20/T DT71D4/BMG/TF/VR/ES3H/IS ( WA20/T DT71D4/BMG/TF/VR/ES3H/IS ) 0,37 kW 135 rpm 230 / 400 V 3AC 50 Hz IP54 Hollow shaft diameter: Ø 20 mm Shaft length: 100 mm Groove width: 6 mm 2x Flange: diameter Ø 62 / 55 mm bolt circle diameter: Ø 70 mm 4x threaded bore: M6 x 1,0, depth: 18 mm 2x gear foot: 90 x 80 mm hole spacing (parallel to shaft): 90 mm hole spacing (transverse to shaft): 75 mm Hole diameter: Ø 6.5 mm Forced fan: Type: VR/4114ENHU-180 0,011 kW 4200 rpm 24 V DC used, tested ! Dimensions: 545 x 220 x 155 mm

Geared motor with brake and inverter SEW-Eurodrive WA20/T DT71D4/BMG/MM05/RJ1A/AND3/AZSK ( WA20/TDT71D4/BMG/MM05/RJ1A/AND3/AZSK ) MOVIMOT MM05C-503-00 0,055 / 0,55 kW 28 - 283 rpm 380 - 500 V 3AC 50 / 60 Hz IP54 Hollow shaft diameter: Ø 20 mm Shaft length: 100 mm Groove width: 6 mm 2x Flange: diameter Ø 62 / 55 mm bolt circle diameter: Ø 70 mm 4x threaded bore: M6 x 1,0, depth: 18 mm 2x gear foot: 90 x 80 mm hole spacing (parallel to shaft): 90 mm hole spacing (transverse to shaft): 75 mm hole diameter: Ø 6.5 mm See also GM1133 and GM1141 ! used, tested ! Dimensions: 380 x 255 x 180 mm

Geared motor with brake and inverter SEW-Eurodrive WA20/T DT71D4/BMG/MM05/RJ1A/AND3/AZSK ( WA20/TDT71D4/BMG/MM05/RJ1A/AND3/AZSK ) MOVIMOT MM05C-503-00 0,055 / 0,55 kW 28 - 283 rpm 380 - 500 V 3AC 50 / 60 Hz IP54 Hollow shaft diameter: Ø 20 mm Shaft length: 100 mm Groove width: 6 mm 2x Flange: diameter Ø 62 / 55 mm bolt circle diameter: Ø 70 mm 4x threaded bore: M6 x 1,0, depth: 18 mm 2x gear foot: 90 x 80 mm hole spacing (parallel to shaft): 90 mm hole spacing (transverse to shaft): 75 mm hole diameter: Ø 6.5 mm See also GM1133, GM1140 and GM1149 ! used, tested ! Dimensions: 380 x 255 x 180 mm

Geared motor with brake and inverter SEW-Eurodrive WA20/T DT71D4/BMG/MM05/RJ1A/AND3/AZSK ( WA20/TDT71D4/BMG/MM05/RJ1A/AND3/AZSK ) MOVIMOT MM05C-503-00 0,055 / 0,55 kW 28 - 283 rpm 380 - 500 V 3AC 50 / 60 Hz IP54 Hollow shaft diameter: Ø 20 mm Shaft length: 100 mm Groove width: 6 mm 2x Flange: diameter Ø 62 / 55 mm bolt circle diameter: Ø 70 mm 4x threaded bore: M6 x 1,0, depth: 18 mm 2x gear foot: 90 x 80 mm hole spacing (parallel to shaft): 90 mm hole spacing (transverse to shaft): 75 mm hole diameter: Ø 6.5 mm See also GM1133, GM1140 and GM1141 ! used, tested ! Dimensions: 380 x 180 x 225 mm

Geared motor with flexible shaft ? 0.18 kW approx. 780 rpm ( counted ) engine: 4 M56?4?3 0,18 kW 1370 rpm 220 / 380 V 3AC 50 Hz IP44 Gear output: Driver: Ø 12 x 3 mm Flexible shaft: Length: 1.0 m Driver: Ø 15 x 5 mm New Dimensions ( without bendable shaft ): 345 x 125 x 160 mm

Geared motor with flexible shaft ? 0.18 kW approx. 780 rpm ( counted ) engine: 4 56 ? 4?3 0,18 kW 1370 rpm 220 / 380 V 3AC 50 Hz Gear output: Driver: Ø 12 x 3 mm Flexible shaft: Length: 1.0 m Driver: Ø 12 x 3 mm New Dimensions ( without Flexible Shaft ): 345 x 125 x 160 mm

DC gear motor, geared motor with speed sensor MAXON MOTOR M98405 001 457745 Gearbox: XG 35 < br /> Shaft diameter: Ø 14 mm Shaft length: 29 mm Groove width: 5 mm Flange diameter: Ø 40 / 62 mm bolt circle: 52 mm 4x threaded hole: M5 x 0.8, depth: 15 mm suitable protective housing - see S2489 ! used, tested ! Dimensions: 262 x 62 x 62 mm

DC gear motor, geared motor with speed sensor MAXON MOTOR M98405 02 431200 Transmission: XD 3 3 5 Shaft diameter: Ø 14 mm Shaft length: 29 mm Groove width: 5 mm Flange diameter: Ø 40 / 62 mm bolt circle: 52 mm 4x threaded hole: M5 x 0.8, depth: 15 mm suitable protective housing - see S2489 ! used, tested ! Dimensions: 262 x 62 x 62 mm

DC gear motor, geared motor with speed sensor MAXON MOTOR M98405 E 19 S24 Transmission: UA 35 Shaft diameter: Ø 14 mm Shaft length: 29 mm Groove width: 5 mm Flange diameter: Ø 40 / 62 mm bolt circle: 52 mm 4x threaded hole: M5 x 0.8, depth: 15 mm suitable protective housing - see S2489 ! used, tested ! Dimensions: 262 x 62 x 62 mm

Servo motor with gearbox and brake, geared motor, permanent magnet motor HAUSER HDX70C4-44S 8000 rpm 350 V AC, 15 A IP64 / 65 Gearbox: NEUGART Type: PL 70-20 i: 20 Shaft diameter: Ø 16 mm Wavelength: 28 mm Groove width: 8 mm Flange diameter: Ø 60 / 70 x 70 mm bolt circle diameter: Ø 75 mm 4x bore: Ø 5.5 mm 2x connection cable: length: approx. 2.2 m used, tested ! Dimensions: 335 x 70 x 100 mm

Geared motor INDUR Antriebstechnik AG 0,06 KW 3,3,3 - 4.1 rpm Transmission: A-31 / 25 Design: B14 / 1 Gear ratio: 400 Shaft diameter: Ø 12 mm Shaft length: 30 mm Groove width: 4 mm Flange diameter: Ø 40 mm bolt circle diameter: Ø 46 mm 4x threaded hole: M5 x 0.8, depth: 14 mm motor: S 56 C4 ( S56C4 ) 0,06 kW 1330 - 1640 rpm 220 - 280 / 340 - 480 V 3AC 50 / 60 Hz IP 55 used, tested ! Dimensions: 275 x 140 x 150 mm