gearbox w p used for sale

Three-jaw chuck, three-jaw lathe chuck -Clamping plate -Mouth size: Ø 160 mm -Quantity: 2x food available Price: per piece -Weight: 7 kg

Three-jaw chuck, three-jaw lathe chuck -DH200x3-III -TGL: 30-2332 -Mouth size: Ø 200 mm -Recess: Ø 155 mm -Bolt circle: Ø 174 mm -Through hole: Ø 57 mm -Weight: 12 kg

Roller chain, drive chain -Type: 08 B-1 -Length per package: 5 m -Price: per chain -Number: 3x available -Weight: 3.5 kg

Wartsila 8R32 Crankshaft Standard sized Measurement reports available Without cracks or weldings

Key data: 3645

Wartsila 9R32LN generator 1 unit available Year:2005 60 Hz 3645 Kw at 720 RPM

Inv. Num. : 7260 Type: WHN 13.4 A Producer: TOS Created: 1986, GO 2003 Parameters: Control system: MEFI CNC 859 Work table length: 1800 mm Work table width: 1600 mm Maximum table load (uniform): 12 t Maximum spindle speed: 1098 1/min X-axis travel: 3000 mm Y-axis travel: 2000 mm Z-axis travel: 800 mm W-axis travel: 1250 mm Spindle diameter: 130 mm Cone: ISO 50 Machine height: 3900 mm Machine length: 6200 mm Machine width: 5930 mm Machine weight: 32 t

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder -Number: 1x recordings Manufacturer: Komet -partially with internal water cooling -Weight: 12 kg

SKODA W200GNR 1978 /CNC MEFI 836 y.m. 2005 ball screws y 4150mm x 8000mm millng heads floor plates 5600x1885x400 rotary table E20 load 20tons

W160HC with ISO 50 y.m. 1987 xtravel 4000mm y travel 3150mm rotary table S35C load 35tons, 3150 x 2800mm milling heads, tools

Nakamura WTS 150 Y2 Bar Lathe :::SPECIFICATIONS::: CNC Model: Fanuc CNC Version: 16i - T Main Spindle Nose: ASA 5 Main spindle power: 7.5Kw Main spindle bar clearance: 42mm Turning diameter: 310mm Turning Length: 255mm Main spindle speed: 6000 Number of Tool Turrets: 3 Number of first turret tool slots: 12 Number of first turret motors: 12 First Turret X-Axis Travel: 207.5mm First Turret Y-Axis Travel: +-30mm First Turret Z-Axis Travel: 300mm Number of second turret tool slots: 12 Number of second turret motors: 12 Second Turret X-Axis Travel: 207.5mm Second Turret Y-Axis Travel: +- 30mm Second Turret Z-Axis Travel: 300mm Number of third turret tool slots: 12 Number of third turret motors: 12 Third Turret X-Axis Travel: 207.5mm Third Turret Z-Axis Travel: 800mm Rapid feeds for linear axes X Y Z: 40m/min High refr ...

- Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Cable length: approx. 6m -Weight: 150 kg

Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Number of shaker bottles: 1 piece -Cable length: approx. 6 m -Weight: 72 kg -Functionally tested

Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Number of vibrating bottles: 1 -Cable length: approx. 6 m -Weight: 105 kg

Tip distance approx.                                                    400 mm Tip height above bed 130 mm 12 speeds from 125 – 2800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx.                                          400 kg

Tip distance approx.                                                    500 mm Tip height above bed 125 mm 16 speeds from 120 – 1800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx.                                          450 kg

Fiber optic measuring amplifier, fiber optic sensor, fiber optic cable sensor, universal reflex sensor, reflex sensor -Manufacturer: Wenglor, fiber optic cable sensor unused in original packaging -Type: UF87PA3 -Number: 3x sensors available -Price per piece -Dimension box: 105/90 / H40 mm -Weight: 0.2 kg / pc.

Compressor control, compressor control, control panel, control box, control unit -Manufacturer: WA Wille Automationstechnik, control box control unit -Type: unfortunately no type designation -Dimensions: 305/210/H110 mm -Weight: 4.2 kg

Cutter head, milling adapter, carbide milling cutter, indexable insert milling cutter, face milling head, milling head -Manufacturer: Widax-Heinlein diameter 173 mm -Type: M400 Ø160 R 12 607 -Number of teeth: 12 -Adjustment: SK50 -Dimensions: Ø 173/260 mm -Weight: 12 kg

live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper -Manufacturer: WMW, live centering tip, 2 pieces -Type: ZN 205 -Recording: MK5 -Price/Sale: complete -Overall dimensions: 270/190/100 mm -Weight: 10 kg

Shell cutters, shell cutters, milling cutters, shell-type milling cutters -Manufacturer: WMW, shell mill -Inside: Ø 32/14 mm -Dimension: Ø 96 x 47 mm -Weight: 1.5 kg

Cardan shaft, cardan shaft, universal joint -Cardan shaft: universal joint, unused -Type / order no .: 21001375 402027/201 7610AVA10 -Shaft: Ø 36 mm -Measurements: see photos -Number: 15x universal joint available -Price per piece -Dimensions: 120/62 / H56 mm -Weight: 1.1 kg / pc.

Drive shaft, cardan shaft, universal joint -Cardan shaft: Universal joint, unused -Type / Order No.: 21001375 402027/201 7610AVA09 -Shaft: Ø 24 mm -Dimensions: see photos -Number: 4x universal joints available -Price: per piece -Dimensions: 102/46/H50 mm -Weight: 0.6 kg/pc.

Used Weiler meat grinder, model 878 AG.

Tapping chucks, thread chucks, tapping chucks, milling tools, tapping attachments -Manufacturer: WMW ABW, tapping chuck holder MK2 with 5 pieces of holders -Type: GB2 M5 - M16 -Dimension: O 62 x 192 mm -Weight: 1.8 kg

Rotary table, rotary indexing table, dividing head, dividing head -Manufacturer: Walter, rotary table type RT 250 TG -Clamping surface: Ø 250 mm -Bore center: Ø 48 mm -Groove width: 12 mm -Dimensions: 460/400 / H150 mm -Weight: 44 kg

diameter: 200 mm amount: 6 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, electric gear motor -Manufacturer: Watt Drive, gear motor type HG OKG 71N4 -Speed: 246 rpm -Power: 0.37kw -Torque: 14.4 Nm -Shaft: Ø 20 x 40 mm -Protection class: IP55 -Dimensions: 400/170/H210 mm -Weight: 15kg

Approximately 3,000 running hours. Key Information: Output: 3150 containers per hour 250ml; 2700 containers per hour 500ml Molds and tooling for 250ml and 500ml IV bags/bottles (14 cavity) included Tooling for Eurocap or nipple/pierce top presentations Eurocap cap welding machine with cap elevator Three product filters 14 parison programable parison head with Moog controller.

Vibrating plate, vibrator, vibration plate, soil compactor, construction vibrator -Manufacturer: Weber, vibratory plate type TC 66 S -Motor power: 6.3 kW -forward/backward- lever position reversed -Engine: Hatz small diesel engine type 1D41S -Operating weight: 430 kg -Dimensions: 900/580/H1450 mm -Total weight: 454 kg

Stn -; Kuipers Woudsend steriltank. • Holdup volume 3000 litre, bruto 3400 litre • Working pressure -1/5 bar. • Test pressure 7 bar. • Design temperature 0/159°C. • Year of manufacture 2001. • Net weight ±1100 kg • Including complete documentation of tank.

Used stainless steel batch fluid bed dryer made by Aeromatic model Stre-30 G-W101. New 1978. Swiss production Wirbelschicht - Trockenungsaniage - Capacity of 150 liters of water evaporation / hr. - A shower - The heat exchanger - A blower - There is a buffer tank - The control panel - Channels are filter - Two tanks interchangeable - Worked at the pharmacy (product unknown) - A bag filter, co channels - Removed, not running around. Year - Complete documentation and schematics - Dimensions: Wed. 90 cm, length 170 cm, the total size of approx. 3 m height. Approx. 170 cm

Sensor actuator distributor, distributor strip, interface, sensor actuator distributor, sensor actuator -Manufacturer: Weidmuller, sensor-actuator-distributor ovp -Type: SAI-8-M 5P M12 170125 -Dimensions box: 175/65/H50 mm -Weight: 0.3 kg

Binding machine Renz WP300 Art.Nr. PS6005

Used drum mixer made by ,,IWS” INOX WELDING SERVICES, 1000 L capacity. Stainless steel. New: 2022 Drum mixer for bulk and granular materials. 2 pieces available.

Geared motor, electric motor, electric geared motor -Manufacturer: ABI, Geared motor type WDF271x -Speed: 25 rpm / i=1:59 -Power: 0.12 kW -Shaft: Ø 20 x 20 mm -Protection rating: IP55 -Dimensions: 310/165/H185 mm -Weight: 9.5 kg

max diam 340 , max modul 8

NEW - TB08148-1 - Electronics 230V from spare parts warehouse.

Key data: 9700 , 11000

Wartsila 20V34SG complete Gas Power plant 9.7 MW 50 Hz 11K Volts Year of make 2011 45.000 Working Hours Maintanence done regularly by wartsila 20V34SG engine with all auxilaries: ABB AMG 1120LT08 Alternator, compressors, Lt Ht water tanks, LV MV HV step up Transformers, control panels, Unic control system, radiators, maintanence tanks, 2 x Napier 357 turbochargers, safety spares, Caterpillar emergency generator,Natural Gas Regulator Unit, engine tools, instruction manual and more... Please contact for more info and complete scope / offer

A used rack oven Wachtel Compact 1.8 KHV Stir from 2013 with gas burner is for sale and immediately available in our warehouse in Bielefeld. The stove is fully assembled in our warehouse. Rack Oven Rotary Oven Wachtel Compact 1.8 KHV Stir - Year of construction 2013 - with gas burner - Door hinge on the right - with exhaust hood including fan - with digital control - for 60x80 or 58x78cm trays - Operating voltage: 400 volts -Control voltage. 230 volts - Frequency: 50 Hz - Power 2.5 kW -20 pieces in stock -External dimensions approx.: 158x170x280cm WxDxH Trade-in and delivery possible, further pictures and information on request

Complete Genset, 0 hours after M6 maintenace, damaged crancksahft. (new bearings, liners, renewed turbochargers, renewed cylinder head, new main, pilot gas valves. Lot of spare parts available.

Spherical plain bearing, rod end, ball joint head -rod end. Shaft Ø 50 mm -Thread: M52x3 -Receptacle Ø: 21 mm -Number: 2x joint head available -Price per piece -Dimension: 250/150/H100 mm -Weight: 5.4 kg/pc.

Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Manufacturer: Weissenfels, Lever chain hoist 3 ton -Load capacity: 3 tons -Chain length: 4 m -Quantity: 1 piece -Price: per piece -Transport dimensions: 700/300/H210 mm -Weight: 25 kg

Tersa Knife Shaft Motor 3x 3HP, 400V, 50Hz Saw blade diameter 250mm Cutting height 85mm to 90° Cutting height 55mm to 45° Mandrel 3000/6000 rpm Sliding table 1450 x 320mm Cutting length 1200mm Mitre fence Eccentric clamps Weight 485kg G&RO-HX260-CE

Key data: 165 mm, 750 mm, 2800 U/min

Manufacturer: Gildemeister Model N.E.F. 320 K Year of construction 2004 Condition Used Siemens control system Specifications Circulation diameter 320 mm Turning length 750 mm Speed range - main spindle 3500 rpm Drive power - main spindle 9 kW Bar diameter 50 mm Tool holder Multifix size B Tailstock mount MK 4 Rapid traverse X / Z 8 / 10 m/min Machine weight approx. 2.5 t Space requirement approx. 2500 x 1800 x 1885 mm Accessories: 3 Jaw chuck Forkardt 200 Tool package Documentation

Reflective light barrier, reflective light sensor, light barrier, light sensor -Manufacturer: Sick, Light sensor light barrier type WL27-2F431S09 -Connection: DC 10-30 V -Number: 11 sensors available Price: per piece - Dimensions: 130/80/H25 mm -Weight: 0.1 kg/pc.

Ignition device for Jenbacher Manufacturer: WOOD WARD Model: IC-920 Serial No.: 15119859

turning diameter over bed: 380 mm turning diameter over slide rest: 0 mm turning length: 950 mm centre distance: 1000 mm centre height: 180 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ignition device for Jenbacher Manufacturer: WOODWARD Model: IC-920 Serial No.: 15152511

mechanically switchable clutch, detachable clutch, power clutch, clutch -Manufacturer: Ortlinghaus, coupling without type designation -Translation: i= 1:1 -Shafts: Ø 24x60 / 24x55 mm -Dimensions: 310/212/H213 mm -Weight: 32 kg

Universal milling and drilling machine KUNZMANN WUF5/3 with Heidenhain ND 780 Built in 1989 in good condition. Technical data WUF5/3: Position indicator Heidenhain ND 780 The ND 780 position indicator is particularly suitable for use on milling, drilling and turning machines with up to three axes. Router table: Clamping surface 850x350 mm Clamping grooves 5 Groove width 14H7 mm Groove spacing 63 mm Workspace: Longitudinal (X-axis) 490 mm Transverse (Y-axis) 310 mm Vertical (Z-axis) 400 mm Max. distances: Top of the table up to Horizontal spindle centre 40 – 420 mm Top of the table up to Vertical head lower edge 350 mm Milling spindle: Tool holder SK40 Horizontal speeds 40 – 2500 min-1 Vertical speeds 40 – 2500 min-1 Quill stroke 60 mm Vertical head can be swivelled on both sides + - 90° Feed rate 1000 mm/min Rapid traverse 4000 mm/m ...