gearbox w p used for sale

pressure: 160 t stroke: 500 mm total power requirement: 20,5 kW weight of the machine ca.: 7,5 t Rated force: 160 Mp (˜ 1600 kN / 160 tons) Operating pressure: 144 kp/cm² Speed: Downward: 200 mm/s Upward: 250 mm/s Ram stroke: 500 mm Throat depth: 360 mm Max. distance (table to ram): 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A universal batch mixer WP is available. Volume: approx. 140l, machine dimensions X/Y/Z: approx. 1500mm/900mm/1200mm, weight: approx. 500kg. An on-site inspection is possible.

Deck oven WP Matador MD101C52 - Manufacturer: Werner & Pfleiderer - Type: Matador MD101C52 - Deck oven with gas burner - 5 shelves each 120cm wide and 160cm deep - 3 Pull-out stoves - With exhaust hood - Combitherm Technical data: - 79 kW - 3N 400 V 50Hz 12A - Year of construction: 10/ 2014

Transducers, power transducers, active power transducers, analog-to-analog converters, frequency-to-analog converters, frequency dividers, isolation converters, signal converters -Manufacturer: Weidmüller, Signal converter 8795890000 -Type: WAS5 PRO Bridge -Price: per piece -Quantity: 9 pieces -Dimensions: 95/15/H110 mm -Weight: 0.1 kg/piece

Digestorium exhaust system for pharmacies, chemistry and medicine -Interior dimensions: 540/850 / H900 mm -Stainless steel version -Glass door front -With Camfit filter cartridge -Connection: 0.085 kW -Type suction: EB 225 -with extractor hood -Dimensions: 675/900/H1200 mm -Weight: 100 kg

Controlled cross table, cross sliding table, clamping table, clamping plate with T-slots, clamping angle, cross table NC, linear robot, coordinate table -Controlled cross table: was used as a soldering station -Manufacturer: Walko, cross table NC type PNC 500 -Table surface: 600 x 300 mm -Travel approx.: X 500 mm / Y 350 mm -Dimensions: 1050/1030/H1530 mm -Weight: 240 kg

Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, circular table saw, circular saw -Manufacturer: White Paisley, table saw on solid base -Motor power: 6.3 kW / 1430 rpm -Saw blade: Ø 550 mm -Max. Cutting height 180 mm -Cutting width: up to 455 mm -Table height: 850 to 1000 mm -Chip extraction: Extraction system can be supplied at an additional cost -Dimensions 1240/1100/H1500 mm -Weight: 762 kg

Heavy lathe, turning machine, lathe, center and feed screw lathe, center and feed screw lathe -Manufacturer: Weisser, lead screw lathe type PF200 -Turning length: 1340 mm -Turning Ø over bed: 420 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 41 mm -Spindle speeds: 31.5 - 1400 rpm -Three-jaw chuck: Röhm Ø 250 mm -Accessories: incl., see photos -Tailstock mount: MK4 -Drive motor: 2.5/3.5 kW -Dimensions: 2670/1000/H1230 mm -Weight: 1450 kg

Gear motor, electric motor, electric gear motor, spur gear motor for strapping machine, packaging machine, strapping machine, skinpack machine, wrapping machine, winding machine, drive unit for stretch wrapping system -Manufacturer: Bonfiglioli, drive unit from packaging machine ILAPAK Astra-STD -Gearbox: Type W63 U P80B14 i= 30 -Motor: 0.75 kW -Speed: 46.6 rpm -Individual components: see photos -Dimensions: 480/350/H250 mm -Weight: 22 kg

winch rope, crane rope, hoist rope, wire rope, stainless steel rope, forestry winch rope -Manufacturer: WDI Python, crane rope winch rope Ø 22 mm -Rope type: 6x36WS-IWRC with 1x full thimble see photos -Length: 44 m -Number: 4x wire rope available -Price: per piece -also other crane ropes: available -Transport dimensions: Ø 750 x 450 mm / Ø 745 x 465 mm -Weight: 114 kg /pc. / 108 kg/pc.

winch rope, crane rope, hoist rope, wire rope, stainless steel rope, forestry winch rope -Manufacturer: WDI Python, crane rope winch rope Ø 22 mm -Rope type: 6x36WS-IWRC -Length: 44 m -Number: 2x wire rope available -Price: per piece -also other crane ropes: available -Transport dimensions: Ø 850 x 510 mm -Weight: 126 kg/piece

winch rope, crane rope, hoist rope, wire rope, stainless steel rope, forestry winch rope -Manufacturer: WDI Python, crane rope winch rope Ø 22 mm -Rope type: 6x36WS-SFC with 1x loop see photos -Length: 44 m -Number: 4x wire rope available -Price: per piece -also other crane ropes: available -Transport dimensions: Ø 800 x 570 mm -Weight: 110 kg/piece

Number of spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. Control: Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ---------------------------------------------------------------------- This machine is currently being refurbished at our facility! Brief Summary: ---------------------------------------------------------------------- 5 spindles with 8,000 rpm 4 x HSK/Powerlock Axially and radial CNC adjustments of the spindles via control CNC-controlled adjustment and positioning of the feed Includes Weinig/Neumann RF 15 return conveyor system Detailed Description: ---------------------------------------------------------------------- - Technical Data: Working width: 20-230 mm Working height: 8-120 mm 1st tool holder - bottom ---------------------------------------- ...

Manufacturer: Weeke, Type: BHC 600 Profiline, Year: 2003, Control: Weeke, Working range X: 9.000, Working range Y-axis: 1.790, Working range Z: 370, C axis: yes, Work piece width min-max mm: 1.300, Min.-max. workpiece length in mm: 7.250, Min.-max. workpiece height in mm: 100, Feeding speed max m/min: 80, Pendulum processing: yes, Number of milling spindles vertical: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: 12, Number of tool changers: 2, Tellerwechseler: 2, Number of tools per tool-magazine: 8 + 18, Mitfahrender Werkzeugwechsler: yes, Vertical drills-X: 10, Drill vertical Y: 10, Horizontal drills-X: 3, Drill horizontal Y: 3, Number of tables: 2, Traverse table: yes, 2 station allocation: yes, Saw unit: yes, Laser positioning: yes, Year :2003

Manufacturer: Proteus, Type: 2 K und Wasserbasierende Mischanlage, Year: 2005, 2 K Mischanlage: yes, Steuerungsanlage für Mischverhältnisse: yes, Füllstandsüberwachung: yes, Wasserbasierend Lacke: yes, 2K-Lacke möglich: yes, Durchflussbereich l/min: 0,8-3,0, Kolbenpumpen gesamt: 4, Kolbenpumpen 1: 30-150, Übersetzungsverhältnis 2: 30:1, Volumenstrom Doppelhub ccm 2: 150, Kolbenpumpen 2: 3 Stück , Übersetzungsverhältnis 2: 30:1, Volumenstrom Doppelhub ccm 2: 150, Luftverbrauch bei 6 bar: yes, Schallpegeldruck db/A: 69, Laquer system - airless: yes, FREE TEXT: ohne Pistolen, Year :2005

Tier Oven Quail Mini Piccolo 4 Electric deck furnace with steam DMS 2 control with night start Extractor hood with fan Connection 400V, 16A-CEE plug Used stove

: gebraucht : 9313A : prompt, Zwischenverkauf v : 2900 € : 1 : 4080 mm MINT CONDITION manual clamping The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Weeke Model: Profiline ABL 220 Year of Manufacture: 2008 Type of Machine : CNC drilling machine with fitting units CE Certified: Yes Electrical Specifications - Operating Voltage: 400 V / 50 Hz - Power: 24 kW - Current: 50 A - Control Voltage: 24 V DC - Workpiece Dimensions - Length: min. 250 mm / max. 2400 mm - Width: min. 240 mm / max. 850 mm - Thickness: min. 12 mm / max. 60 mm The machine processes rectangular workpieces made of melamine-coated chipboard and similar panel materials. Machine Performance - Machining capacity: approximately 300 to 350 furniture frames per 7.5-hour working shift. - Axis Speeds: - X-axis: 80 m/min - Y-axis: 80 m/min - Z-axis: 20 m/min - Drilling Unit - V18 High Speed 7500 - Configuration: 18-spindle vertical drill unit (CONFIG-V18) - Spindle Speed: 1500 to 7500 rpm (variable speed controlled) - Direction of Rotation: Right / Left - ...

Used bread roll line W&P, type: Rollprofi -In bakery condition- For cut rolls, smooth and round knitted, long rolled and double rolls. - 5 rows - 600 mm working width - Integrated dough divider and drum rounder, Multimatic - Pre-proofing time: 12 min - 6 min before long-distance taxiing station - 6 min between long roller and cutting station - Weight range:24-85 g - Output: max. 4,680 pcs. / h Visits and test runs are possible by arrangement.

Head machine / dough divider W&P, Type: Multimatic MUC-5 -Overhauled- - Gentle dough division - 5 rows - Weight range: 35 - 85g - Capacity: max. 10,000 pcs. / h - Stainless steel - new tapes - Condition: Very good, many parts renewed Viewing and test run are possible.

General SKU292M351 MakeWysstec AG TypePharma-Extruder PHARMEX 35 T & Noduliser SPHAEROMAT 250 T No.11480 Mounted on framecheck Main Features Motor0.55 KW L/D6 Specified Features - Single screw extruder Single screw extrudercheck Screw diameter35 mm L/D6 D AC-motorcheck (1,5 kW Ex) With variable speed drivecheck Screw speed25-150 rpm Feeding with hoppercheck Capacity2-20 kg/h MaterialStainless steel 1.4305 (303) Single screw extruders With variable speed drivecheck (noduliser) Information LocationBarneveld With switchgearcheck Floorspace1,1x0,8 m Total height1,7 m Weight340 kg Extra SpecificationsNoduliser PHAEROMAT 250: - disc diameter: 250 mm - with outlet - with cover - motor: 0,55 kW (Ex) - with variable speed drive - disc speed: 0-1440 rpm Feed additivesAnimal feedOther feedSingle screw extrudersPowdered foodsWysstecIndustries > Food & Feed > Feed additive ...

The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames.; Gross weight [kg]: 1760; Engine: Perkins 1106A-70TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 327

General SKU082Z322 MakeWerner & Pfleiderer, Stuttgart TypeUK-14 X/AU No.154 576 Year of constructionunknown LocationBarneveld Pressure Working pressure6 Bar Main Features MaterialMild steel Volume200 Ltr. Motor17.5 KW Specified Features - Z-blade mixer Jacketcheck Max. temperature220 Degr. C. Screw speed20/40 Rpm Arm speed27/20 Rpm (front/back) Capacity250 Ltr, Useful 200 Ltr Double shaft kneaderMixtruder (1x) Masticator-armscheck Trough sizes740x685mm With covercheck With screw dischargecheck Motor30,0 KW, 380 Volt Motor11,0/17,5 KW, 380 Volt Z-blade mixers MaterialMild steel Information With switchgear(Dim. 80x40x180 CM) Floorspacekneader 2,8x1,4 M Total height1,6 M Weight3200 KG Extra Specifications- Dimensions drive unit 1,4x1,0x1,7 M (LxWxH), weight 2130 KG Technical specs Extra informationtest pressure is achieved at 220 Degr. C.Z-blade mixersDis ...

Technical Specifications & Performance Data The Used Linear Labeler Non Stop PackLab 2019 WING CWW 20 is a high-efficiency, second hand self-adhesive labeling solution designed for continuous operation in beverage production and industrial packaging environments. Optimized for wrap-around and front/back applications, it integrates seamlessly into a used bottling line alongside rinsing, filling, and capping equipment. Manufacturer: PackLab Model: WING CWW 20 Year of manufacture: 2019 Machine type: Linear self-adhesive labeler with non-stop dual stations Production speed: up to 20,000 bottles/hour (format and label dependent) Label applications: Wrap-around body labels on cylindrical containers; partial front and back labels on shaped containers Number of labeling stations: 2 (automatic interchange at end of reel, web break, or label absence) Container types handled: Glass bottles, metal c ...

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 3 kW Feed speed: 5-30 m/min. Weinig Powermat 500, year of manufacture 2010, window version ------------------------------------------------------- technical details short summary: -------------------------------------------------------- - 6 spindles, 5 of which are PowerLock - 8,000 rpm - Large PowerCom control system - Spindles 2, 3, and 4 axially CNC-controlled - Spindles 2, 3, 4, and 5 radially CNC-controlled - Window package for glazing bead removal: Pneumatic indexing of right and top spindles for bead removal See attached PDF document for detailed description Options with additional costs: -------------------------------------------------------- - Existing planing and molding tools by Leitz (price on request!) - Maweg Saturn Duo single-slot wood sander, manufactur ...

The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames.; Gross weight [kg]: 454; Engine: Perkins 404D-22G; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 66

Number of boring spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2.000 mm Feed motor: kW Planing and moulder Weinig Profimat 23 for four-sided planing and profiling of timber incl. a set of planing heads. Including dismantling and loading. Fixed loading date: 15.06.2026. Spindle 1: Bottom Spindle 2: Right Spindle 3: Left Spindle 4: Top Spindle 5: Bottom The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 1992 : 010190 : prompt, Zwischenverkauf v : 19800 € : 1 : 320 mm : 650 mm : 160 mm : 40 mm : 192 mm : 205 mm : 5 : 5 MK : 16 : 48 - 2500 1/min : 24 : 0.02 - 0.63 mm/U : 0.006 - 0.2 mm/U : 0.25 - 8 mm : 0.2 - 4 : 150 mm : 100 mm : 40 mm : 3 MK : 85 mm : 2,4 / 3 kW : 1582 mm : 715 mm : 1245 mm : 680 kg Heidenhain 3-axis digital readout NEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Quick-release collet chuck with various collets from 1 to 27 mm Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dough section and crier WP Multimatik MUS - Manufacturer: Werner & Pfleiderer Lebensmitteltechnik - Type: MUS - 4-row - Year of construction: 2005

x-travel:700 mm y-travel:450 mm z-travel:500 mm total power requirement:23,4 kW weight of the machine ca.:3100 kg dimensions of the machine ca.:3200 x 4000 x 2500 mm tool taper:ISO 40 feeds:0,2 - 0,6 - 0,12 mm/U spindle speeds::20 - 3150 , direkt programmierbar /min feed range:1 - 3000, in B=0,01 - 3 U/min rapid traverse in x-y-z axis:6m/ min, B = 7,6 U/min work table::NC Rundtisch(B-Achse) D=630 mm, 9T-nuten control:CNC432

General SKU253N183 LocationBarneveld MakeJohann Kreuziger Maschinenfabrik TypeRDH 500 RERE No.21159 Pressure Working pressure0 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume450 Ltr. Motor80 KW Specified Features - Planetary mixer Planetary mixercheck 1 Mixing/kneading shaftmixer arm and dissolver disc With scrapercheck Motor57 kW (mixer): 20 kW (dissolver) With variable speed drivecheck With gear boxcheck With panø 950 x 650 mm (on wheels) Capacity450 l Outlet75 mm With hydraulic liftingcheck (3,6 kW) MaterialStainless steel Information Year of construction1986 With switchgearcheck (as is) Floorspace3,6 x 1,8 m Total height3,4 m Weight6000 kgCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicPlanetary mixersOther chemicalFine chemicalsOintmentsPaints & coatings ...

General SKU204U042 MakeWerner & pfleiderer TypeZSK 70F175E Mach.No.231783 Year of construction1996 ( gearbox 2017) Sizes Screw diameter70 mm Main Features Motor108 KW L/D23 Specified Features - Double screw extruder MaterialNichrome 2.4869 Double screw extrudercheck Screw diameter70 mm L/D23 Co-rotatingcheck Water coolingcheck AC-motorcheck 108kW, 330Volt, 1500rpm With variable speed drivefrequency controller Screw speed198 rpm Exchangeable segmentscheck ( not included) Information LocationBarneveld With switchgearcheck Sizes switchgear1,25x0,7x2,15 m Floorspace4,6x2 m Total height1,7 m Weight6400 kg Extra Specificationsinlet: 142x130 mm - there are 2 screw shafts present - no screw segments present - no extruder head present Catalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsFood additivesSugarLubricants & oleoAnim ...

General SKU204W036 MakePfaudler-Werke TypeAE100 LocationBarneveld CEcheck Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume100 Ltr. Motor1.5 KW Specified Features - Glass-lined Reactor MaterialGlass - Enamel (PPG) Glass Reactors Reactorcheck Capacity138 l., (netto 100 l.) Vessel sizesDia. 500x931 mm Dished bottomcheck Top connectionscheck OutletDN80 With jacketcheck Volume 43 l. Max. temperature-25°C/+200°C With propellor stirrercheck Motor1,5 kW, 400 volt, 1415 rpm, (Ex) Speed mixing shaft224rpm Information No.74686 Year of construction2007 Mounted on legscheck Floorspace0,80x0,80 m Total height2,0 m Weight700 kg Extra Specifications- pneumatic glass-lined outlet valve includedCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmeticsLubrican ...

General SKU204W048 LocationBarneveld CEcheck MakePfaudler-Werke TypeAE100 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume138 Ltr. Motor1.5 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity138 l, (100 l. Vessel sizesDia. 800x500 mm Dished bottomcheck Dished top sidecheck Top connectionscheck Outletcheck With jacketVolume 43 l. Max. temperature-25°C/+200°C With propellor stirrercheck Motor1,5kW, 400V, 1405rpm (EX) Glass Reactors MaterialGlass - Enamel (PPG) Information No.74687 Year of construction2007 Floorspace1,0x1,0 m Total height2,0 m Weight700 kg Extra Specifications- pneumatic glass-lined outlet valve includedCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmeticsLubricants & oleoGlass-lined ReactorsSolid pharmaceutics ...

General SKU304W588 MakePfaudler TypeE 1200 No.62391 Year of construction1997 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialGlass Volume1200 Ltr. Specified Features - Glass-lined Reactor Reactorcheck Capacitybruto 1365 l, (netto 1200 l) Vessel sizesDia. 1300x1250 mm Dished bottomcheck Dished top sidecheck ManholeDN700 Top connectionsDN150, DN100 (4x) OutletDN100 With jacketcheck Volume 245 l Max. temperature-10°C/ +200°C Glass Reactors MaterialGlass - Enamel (WWG-9115) Information Floorspace1,50 x 1,50 m Total height1,80 m Weight2235 kg Extra Specificationscheckunused reactor bodyCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmeticsLubricants & oleoGlass-lined ReactorsSolid pharmaceuticsDyes & pigmentsAPIAgrochemicalsBiotechnologyOther chemicalFine chemicalsOintm ...

General SKU431U1385 MakePfaudler-werke LocationBarneveld CEcheck TypeBE 8000 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume8000 Ltr. Motor15 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity8000 l (bruto 9367 l) Vessel sizesø 2200 x 2400 mm Dished bottomcheck Dished top sidecheck ManholeDN600 Top connectionscheck OutletDN150 With jacketcheck Volume 800 l., allowable temp -25°C/+200°C Max. temperature-25°C/+200°C With propellor stirrercheck Motor15 kW (400 V, 1450 rpm, (Ex)) Speed mixing shaft290 rpm Glass Reactors MaterialGlass - Enamel (WWG-9115) Information No.124971 Year of construction1999 Floorspace2,70 x 2,70 m Total height4,64 m Weight8700 kg ATEX compatiblecheckCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCos ...

General SKU322W671 MakePfaudler LocationBarneveld CEcheck TypeBE-16000 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket8 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume16000 Ltr. Motor18.5 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity18200 L (netto 16000l) Vessel sizes⌀ 2542 x 4080 mm Dished bottomcheck Dished top sidecheck Manholecheck DN600 Top connectionsDN 300 (3x), DN200 (5x) OutletDN 150 With jacketcheck 1451 l Max. temperature-25/+200°C With propellor stirrercheck (With Cryo lock) Motor18.5 kW, 400/600V, 1474rpm (EX) Speed mixing shaft75 rpm Glass Reactors MaterialGlass - Enamel Information No.70173 Year of construction2003 Floorspace3,3x3,3 m Total height6,4 m Weight19000 kg Extra SpecificationsThis reactor has 3 repaired damages (see the photos). : Reparation report availa ...

General SKU292W513 MakePendraulik LocationBarneveld CEcheck TypeWDU 11 Main Features MaterialStainless steel Motor11 KW Specified Features - Dissolver Dissolvercheck Shaft length1370 mm Disc diametermax 250 mm Between shaft and frame435 mm With hydraulic unitcheck Motor11 kW, 400 volt, (Ex) With variable speed drive150-2000 rpm With mechanical liftingcheck Motorcheck MaterialStainless steel Information No.414 Year of construction2008 With switchcheck Floorspace0,47 m Total height3,40 m ATEX compatiblecheck Extra SpecificationsMixing disc and Stahl control Drum cap. 100-400 kg, dia. max 650 mm, : Catalysts & fillersDissolversSolventsDetergent & surf.Other pharmaceuticsLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicOther chemicalFine chemicalsOintmentsPaints & coatingsOils & fatPendraulikIndustries > Chemical > Catalysts & fillersMixers > Dissolv ...

General SKU292W506 MakePendraulik TypeWDU 15 No.415 Year of construction2008 LocationBarneveld Main Features MaterialStainless steel Motor11 KW Specified Features - Dissolver Dissolvercheck Shaft length1370 mm Disc diametermax 280 mm Between shaft and frame465 mm Motor11 kW, 400 volt, (Ex) With variable speed drive150-1800 rpm With mechanical liftingcheck Motorcheck MaterialStainless steel Information With switchcheck Total height3,40 m Weight1250 kg CEcheck ATEX compatiblecheck Extra SpecificationsWith mixing disc, Stahl control Drum dia. max 700 mm Catalysts & fillersDissolversSolventsDetergent & surf.Other pharmaceuticsLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicOther chemicalFine chemicalsOintmentsPaints & coatingsOils & fatPendraulikIndustries > Chemical > Catalysts & fillersMixers > DissolversIndustries > Chemical > SolventsIndustries >  ...

General SKU292W518 LocationBarneveld CEcheck Main Features MaterialStainless steel Motor13.5 KW Specified Features - Dissolver Dissolvercheck Shaft length1400 mm Disc diametermax dia. 280 mm Between shaft and frame530 mm Motor13,5 kW, 400 volt, (Ex) With variable speed drive300-1800 rpm With mechanical liftingcheck Motorcheck MaterialStainless steel Information MakePendraulik TypeWDR 18 With switchcheck Floorspace0,78 x 1,0 m Total height3,52 m Weight1350 kg ATEX compatiblecheck Extra SpecificationsMixing disc and Stahl control Drum cap. 400-1350 kg, max drum dia. 600-900 mm, Catalysts & fillersDissolversSolventsDetergent & surf.Other pharmaceuticsLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicOther chemicalFine chemicalsOintmentsPaints & coatingsOils & fatPendraulikIndustries > Chemical > Catalysts & fillersMixers > DissolversIndustries > Chemica ...

General SKU292W515 LocationBarneveld CEcheck Main Features MaterialStainless steel Motor5 KW Specified Features - Dissolver MaterialStainless steel Dissolvercheck Shaft length1370 mm Disc diametermax dia. 200 mm Between shaft and frame500 mm Motor5,0 kW, 400 volt, (Ex) With variable speed drive360-1800 rpm With mechanical liftingcheck Motorcheck Information MakePendraulic TypeWDV 5.0 With switchcheck Floorspace0,56 m Total height3,45 m Weight840 kg ATEX compatiblecheck Extra Specificationsdrum cap. 400-1350 kg, max dia. 600-800 mm, with mixing disc, Stahl controlCatalysts & fillersDissolversSolventsDetergent & surf.Other pharmaceuticsLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicOther chemicalFine chemicalsOintmentsPaints & coatingsOils & fatPendraulikIndustries > Chemical > Catalysts & fillersMixers > DissolversIndustries > Chemical > SolventsIn ...

General SKU292W514 LocationBarneveld CEcheck MakePendraulik Main Features MaterialStainless steel Motor7.5 KW Specified Features - Dissolver Dissolvercheck Shaft length1370 mm Disc diametermax 200 mm Between shaft and frame500 mm Motor7,5 kW, 400 volt, 1450rpm (Ex) Speed mixing shaft360-1800 rpm With mechanical liftingcheck Motorcheck MaterialStainless steel Information TypeWDV 7,5 Year of constructionunknown With switchcheck Floorspace0,56 m Total height3,45 m Weight840 kg ATEX compatiblecheck Extra Specificationsdrum cap. 400-1350 kg. max drum dia. 600-800 mm Catalysts & fillersDissolversSolventsDetergent & surf.Other pharmaceuticsLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicOther chemicalFine chemicalsOintmentsPaints & coatingsOils & fatPendraulikIndustries > Chemical > Catalysts & fillersMixers > DissolversIndustries > Chemical > SolventsIn ...

General SKU292W528 MakePendraulik TypeWDV10 LocationBarneveld Main Features MaterialStainless steel Motor10 KW Specified Features - Dissolver MaterialStainless steel Dissolvercheck Disc diametermax 250 mm Motor10 kW, 380 volt, (Ex) With variable speed drive260-1800 rpm With mechanical liftingcheck Motorcheck Information ATEX compatiblecheck Extra SpecificationsMixing disc and Stahl control : :Drum capacity 400-1350 kg, max drum diameter 600-900 mm.Catalysts & fillersDissolversSolventsDetergent & surf.Other pharmaceuticsLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicOther chemicalFine chemicalsOintmentsPaints & coatingsOils & fatPendraulikIndustries > Chemical > Catalysts & fillersMixers > DissolversIndustries > Chemical > SolventsIndustries > Chemical > Detergent & surf.Industries > Pharmaceutical > Other pharmaceuticsIndustries > Chemical > Lubricants ...

General SKU292W527 LocationBarneveld Main Features MaterialStainless steel Motor10 KW Specified Features - Dissolver Dissolvercheck Disc diameterMax dia. 250 mm Motor10 kW, 380 volt, (Ex) With variable speed drive360-1800 rpm With mechanical liftingcheck Motorcheck MaterialStainless steel Information MakePendraulik TypeWDV10 With switchcheck ATEX compatiblecheck Extra SpecificationsMixing disc and Stahl control : : Drum capacity 400-1350 kg, max drum diameter 600-900 mm. Catalysts & fillersDissolversSolventsDetergent & surf.Other pharmaceuticsLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicOther chemicalFine chemicalsOintmentsPaints & coatingsOils & fatPendraulikIndustries > Chemical > Catalysts & fillersMixers > DissolversIndustries > Chemical > SolventsIndustries > Chemical > Detergent & surf.Industries > Pharmaceutical > Other pharmaceuticsIndustrie ...

General SKU323S571 LocationBarneveld MakePfaubler TypeAE 2500 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume2500 Ltr. Motor11 KW Specified Features - Glass-lined Reactor MaterialGlass - Enamel (WWG) Glass Reactors Reactorcheck Capacity3515 Ltr. (nett. 2500 Ltr.) Vessel sizesdia. 1600x1600 mm Dished bottomcheck Dished top sidecheck Manholecheck Top connectionsDN100 (5x), DN200 (2x) OutletDN100 With jacketcheck Max. temperature-25/200 degr. C With propellor stirrercheck Motor11 kW 220/380 Volt Information No.50718 Year of construction1990 Floorspace2,2x2,2 M Total height3,6 M Weight4330Catalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmeticsLubricants & oleoGlass-lined ReactorsSolid pharmaceuticsDyes & pigmentsAPIAgrochemicalsBiotechnologyOther ...

General SKU201P079 MakePfaudler-Werke AG (DE) TypeT800 No.204401 Year of construction1971 LocationBarneveld Pressure Working pressure1.5 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialMild steel Volume898 Ltr. Motor1.5 KW Specified Features - Mild Steel Reactor MaterialMild steel Mild Steel Reactors Reactorcheck Capacity898 Ltr Vessel sizesdia.1100mm x1000mm Dished bottomcheck Dished top sidecheck Top connectionsdia.200mm, dia.80mm, (3x)dia.70mm Outletdia.50mm With jacket(174 Ltr) Max. temperature200 degr.C. With propellor stirrercheck Motor1,5 KW, 230/400 Volt (EEX) Speed mixing shaft86 rpm Information Floorspace1.4x1.2 M Total height2,6 M Weight1400 KG ATEX compatiblecheck Extra SpecificationsNot glassed Catalysts & fillersPaper & otherSolventsDetergent & surf.OrganicsE-waste & metalLubricants & oleoMild Steel ReactorsDye ...

General SKU402S948 MakeWerner & Pfleiderer (DE) LocationBarneveld TypeUK80 AES Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume80 Ltr. Motor30 KW Specified Features - Z-blade mixer Z-blade mixercheck Capacity80 Ltr. With covercheck With jacketcheck Max. temperature180 °C Arms can be heated/cooledcheck Double gearedcheck Motor30 kW 500 V 1450 rpm (Ex) Arm speed20-40 rpm With hydraulic unitcheck Screw dischargecheck Motor11/18 kW 500V Ex With variable speed drivecheck Screw speed750-1500 rpm MaterialStainless steel Information No.229808 Year of construction1990 Mounted on framecheck Floorspace2,6 x 1,7 m Total height2,3 m Weight5000 kg ATEX compatiblecheckCatalysts & fillersFeed additivesPaper & otherZ-blade mixersDetergent & surf.Other pharmaceuticsCosmeticsSugarLubricants & oleoAnimal feedOther feedSolid ...

General SKU088X452 MakeWerner & Pfleiderer TypeUK-14-X (fixed trough) No.89802 Year of constructionunknown LocationBarneveld Main Features MaterialMild steel/Stainless steel Volume200 Ltr. Motor5.5 KW Specified Features - Z-blade mixer MaterialMild steel, Stainless steel Z-blade mixer(1x) Capacity200 Ltr (useful) Trough sizes745x690x570mm With covercheck With jacketcheck Single gearedcheck With adjustable packing glandscheck Motor5,5 KW, 380 Volt (Ex) Bottom outletdia. 75mm (2x) Information Floorspacewithout motor 2,2x1,0 M Total height1,6 M ATEX compatiblecheckCatalysts & fillersFeed additivesPaper & otherZ-blade mixersDiscountDetergent & surf.Other pharmaceuticsCosmeticsSugarLubricants & oleoAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicPlastic & polymersRubberOther chemicalStarchPowdered foodsPaints & coatingsOils & fatWerner & Pf ...

General SKU054F306 MakeWerner & Pfleiderer Stuttgart TypeUK-80 K4UH No.163 258 / 483 188 Year of construction1979 LocationBarneveld Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket10 Bar Main Features MaterialStainless steel Volume80 Ltr. Specified Features - Z-blade mixer Z-blade mixer(1x) Capacity170 Ltr, Useful capacity 80 Ltr Trough sizes515x525x600mm With covercheck With jacketcheck Max. temperature350 Degr. C. Double geared(hydraulic driven, power pack is missing) With adjustable packing glandscheck Hydraulic tiltingcheck With hydraulic unitcheck Motor2,0 KW, 220/380 Volt MaterialStainless steel 1.4571 (316Ti) Information Mounted on foundationcheck Floorspace2,8x1,2 M Total height1,9 M Weight2450 KG Extra Specifications- With additional set masticator arms Catalysts & fillersFeed additivesPaper & otherZ-blade mixersDiscoun ...