131,076 used machines on RESALE, but how to find them? Machine Search
Key data: 130 mm
Stock# UG6397 Used line for WPC (wood plastic composite) acoustic panels production. Line had been working on acustic panels with width 600 mm x length up to 6 m. Maximal possible width up to 900 mm. Line consist of: - Twin screw, co-rotating extruder by Weber (D) model DS 13.27. Machine has twin screws, each with diameter 130 mm. Working length LD = 27. Extruder is driven by el. motor 145 kW. Barrel has 12 heating zones, each with el. heaters 5.5 kW. Includes Transi-Tec mixing and dosing device and unused spare barrel. - Calibrating table by Techno-Plast with 4 pcs of vacuum pumps (each power 4 kW) and one blower with power 1.1 kW. - Pull-off with a saw by Techno-Plast, driven with motor 5.7 kW - Profile collection table - Vacuum pump (Busch) - ONI water cooling exchanger Line new in 2010.
Root End Reducer B&Z Type WRP SO Well-preserved fully functional root end reducer made by Baljer and Zembrod. Built in 2004. Complete with control, disposal scraper conveyor straight approx. 8.0 m and ascending approx. 6.0 m. Including hydraulic log ejector. The hydraulic power unit with 15 kW is included in the scope of delivery, we also have the remote control for the control of e.g. sorting trolleys. Complete steel substructure. Length of milling shaft 1,380 mm. Drive of milling shaft with 75 KW motor. Feed motor slewing gear with 4.5 kW. Drive scraper conveyor with 3.0 kW.
Key data: 3915 KW, 6000 V
Wartsila 3.9 MW/50Hz Gas Generating Set 12V34SG with CHP Auxiliaries This power plant was built by Wärtsilä at the end of 2010 and commissioned in 2011 as a turnkey project, equipped with a heat recovery system for 10 bar steam production. The plant operates on standard natural gas supplied via a local pipeline. It was in operation until 2021, accumulating a total of 43,767 running hours before being shut down. The complete installation includes a step-up transformer, lube oil system, control panels, synchronizer panel, UPS systems, operator monitors, MCC, start-up system, air compressors, HRCS for 10 bar steam, exhaust system, 6 kV vacuum breaker with synchronization, as well as all manuals and technical drawings. The plant remains installed, with electrical power still connected to all devices. All scheduled maintenance was performed by Wärtsilä Service, with the last maj ...
Colors: 7 authorized (2x spots + white), External ESKO-RIP IN-50, Accessories as far as available., Total: approx. 146 million prints, The machine is currently in operational state.
Net capacity: 20,000l, gross capacity: 21,610l, operating temperature: -10 to 100°C, operating overpressure: -0.1 to 0.6bar, material: 1.4571, medium density: 1.3t/m³, height: 4958mm, diameter: 2850mm, empty weight: 2.9t, weight of insulation, platform, access ladder, pipe holder, agitator: 700kg, minimum installation weight: 3.6t. With complete documentation, sale including insulation. An on-site inspection is possible, fully cleaned and ready for operation.
Witzig & Frank TriFlex 5XYear of manuf. : 2018 Control : Fanuc 30i-B ____________Description:In General:Year of construction:2018Control system:FanucProcessing stations:5 piecesLoading station:1 pieceTravelling range:X-axis:450 mmY-axis:500 mmZ-axis:450 mmRapid traverse X/Y/Z:50 m/minTurret:Number of stations:8Speed:13,300 rpmTorque:58 NmTool holder:HSK 63 CWorkpiece/device:Dimensions max.:350 x 350 x 350 mmMax. permissible mass:250 kgMedia supply line:6 piecesNC swivelling rotary table:A-axis:+/- 150°B-axis:360°Max. load:250 kgTable diameter:320 mmEquipment:Loading/unloading:Fanuc Robot M20i-AChip removal:2x chip conveyorsCoolant supply:IKZ system, 20 barPosition measuring systems:Direct in all axes
SW BA W06-22Year of manuf. : 2020 Control : Siemens 840 Dsl Speed : 17500 rpmMovement X/Y/Z : 600/630/510 mmTool holder : HSK 63 ____________Description:In General:Year of manufacture:2020Control system:Siemens 840 DslTravel range X/Y/Z:600/630/510Spindle centre distance:600 mmRapid traverse X/Y/Z:120 m/minSpindles (2 pieces):Technology:Motorised spindlesSpeed:17,500 rpmPower:35 NmTorque:80 NmTool holder:HSK 63Swivel mount:Technology:A-axis or U-axis with counter bearingDrive:Direct drive (torque motors)Clamping bridge:Technology:Clamping bridges, each with 2 NC rotary tablesDrive:Direct drive (torque motors)Table diameter:Ø 340 mmMax. table load:2 x 90 kgMax. fixture dimensions:2x Ø 600 x 400 mmTool magazin:Technology:Chain magazineTool changer:Pick-upNumber of stations:2 x 72Max. tool diameter:80 mmMax. tool length:425 mmEquipment:Position measurement systems:Direct on all axes ...
EMAG WEISS W 11-CNC SL650Year of manuf. : 2020 Control : Sonstige WEISS CNC Centre width : 650 mm____________Description:In Generel:ear of construction:2020Control system:WEISS CNCCentre width:650 mmCentre height:200 mmGrinding wheel dimensions:400x60 mm + 500x60 mmWorkpiece headstock:Speed:10 -650 rpmWorkpiece weight max.:250 (100) kgSanding diameter max.:390 mmMounting:MK4Grinding headstock:Peripheral speed:20 - 50 m/sGrinding disc dimensions right:500 x 60 mmGrinding disc dimensions left:400 x 60 mmX-axis:380 mmZ-axis:700 mmB-axis:torque motor, infinitely variableTailstock:Pinole diameter:50 mmPionole stroke:45 mmMounting:MK 4Cylinder fine adjustment:+/- 0.04 mmEquipment:Positioning sensors:Direct scalesGrinding spindles:2x grinding spindle (left/right)GAP / Crash Controll:Structure-borne sound (Sensotronik)Balancing:MPM balancing deviceWorkpiece measurement:Marposs PF MEAutomat ...
used
Available: 6 gas generator sets Wärtsilä type 16V175SG2, mounted on skids, without control panels. Year: 1996 Service hours: 26,000 h Speed: 1500 rpm – 50 Hz Alternators: Stamford Please feel free to contact us for further information (price, photos, availability).
Universal milling machine MIKRON WF3DCM/155 Heidenhain TNC 155 Internal machine no. 58 Travels: X-axis: 500 mm Y-axis: 500 mm Z-axis: 350 mm Table surface: 800 x 450 mm Mount: SK 40 DIN ISO Machine weight: approx. 2.3 t
Key data: 8000 KW
Diesel Generators Wartsila 2 x 12V32 HFO – 2 x 4.0 MW/ 50Hz Deliver proven, industrial-grade power with these Wartsila 12V32 medium-speed diesel generator sets, currently available in standby condition. Equipment is maintained by the book and thus in good operational condition. Last thorough 48k Service was carried out in 2016 by Wartsila Service for both engines and since then, the plant has been operated about 20’000 hours. Designed for continuous and prime power duty, these units offer a good reliability, fuel flexibility, and choiceed auxiliaries — making them ideal for industrial plants, captive power projects, utilities, as a base load or back-up electric power generation. These units are priced for sale. Contact us today to receive commercial valuation, scope clarification, and inspection arrangements for this 8 MW Wartsila power solution Technical Characteristics ...
AKOMAG Combi 175-18 Semi-Automatic Bottle Washer (150–500 bph) AKOMAG Combi 175-18 is a compact, semi-automatic bottle washer designed for efficient internal and external cleaning of glass beverage bottles, including wine, beer, water, and soft drinks. Ideal for small to medium production volumes, it delivers a throughput of 150–500 bottles per hour, depending on bottle size, shape, and label removal requirements. Built entirely from stainless steel, the machine features a space-saving, modular design with options for sanitization and auxiliary modules. It uses a heated NaOH water solution (up to 70 °C) with low-pressure steam to ensure thorough washing and effective label removal. Automated rinsing and washing processes are combined with manual bottle loading and unloading for operational flexibility. Engineered for low water and energy consumption, the AKOMAG Combi 175-18 o ...
Key data: 19560 KW, 11000 V
Multifuel 19.5 MW Wartsila CHP Power Plant with 2 x 20V34DF (2021) This 19.5 MW multifuel (Gas / HFO / LFO) combined heat and power (CHP) plant is equipped with two Wartsila 20V34DF generating sets and exhaust gas heat recovery boilers. The plant was commissioned at the end of 2022 and has accumulated approximately 20,000 operating hours since new. All operation and maintenance activities have been performed by the Wartsila OEM Service team, ensuring that both the generating sets and auxiliary systems are maintained according to standards and remain in near-new condition. The plant is currently fully operational, available for immediate delivery, and can be load-tested for qualified buyers. The scope of delivery includes complete mechanical equipment capable of producing 19.5 MW of electrical power and 9.5 tons/hour of saturated steam at 10 bar. In addition, the delivery includes an ...
Key data: 53500 KW, 11000 V
Diesel Power Plant Wartsila 50 MW with 6 x 20V32 HFO Generator Set The diesel power plant has a total installed capacity of 53.5 MW and comprises six identical Wartsila 20V32 generator sets, each rated at 8.9 MWe (50 Hz). The generating sets are equipped with asynchronous AKV alternators and are designed to operate on heavy fuel oil (HFO). All necessary auxiliary systems are included. Each engine operates at 750 rpm and is turbocharged with intercooling. The engines are mounted on base frames that also function as wet oil sumps. The generator sets have accumulated approximately 35,000 total operating hours and have been maintained in accordance with Wartsila’s service guidelines. Maintenance has been performed by Wartsila Service and a certified service provider specializing in Wartsila engines. Engine cooling is provided by a radiator-based cooling system with two separate co ...
CNC horizontal boring machine Type: WHN 13.8 A-CNC Manufacturer: TOS Year: 1979 Overhaul: 2007 Control: Heidenhain TNC 530 Spindle diameter: 130 mm Spindle taper: ISO 50 Main motor power: 37 kW X: 3500 mm Y: 2000 mm Z: 1250 mm W: 800 mm Table: 1800 x 2200 mm Max table load: 12000 kg Machine weight: 36000 kg In good condition, fully functional Find more here - / Contact us at -
A professionally dismantled and preserved steam boiler system with a Loos steam boiler and Weishaupt burner is available. 1) Loos UL steam boiler, year of construction: 1991, max. steam output: 6000kg/h, max. operating overpressure: 16bar. 2) Dual fuel burner Weishaupt Monarch RGL 60/2-A, year of construction: 1991, version: ZM, output range: 800kW-6600kW, gas type: N, gas category: I, gas setting pressure range: 30mbar-170mbar, oil throughput range: 120kg/h-556kg/h. Documentation available. An on-site inspection is possible.
For sale are several Tungaloy interchangeable plate drills Prices and more on inventar-verkauf.de/id/alesco
WEIMA WLK 14P SINGLE SHAFT SHREDDER, previously used for PET bottles, industrial scraos from I.M., rotor width 1.400 mm Ø 368 mm., n.90 rpm, n.82 knives, Feeding room 1.400 x 1.700 mm., horizontal hydraulic ram, 75 kW drive, Screen 90 mm.Ø holes, Throughput rate ca.600 kg depending on material and feeding rate, Feeding hopper ca 600x 578 mm + 1000 x 78 mm inlet, The machine comes complete with extraction belt, magnetic separator, installed power - used power in work: about 60-65% : 75 kW, availability: 1 month, working width: 1.400 mm., options available: different screen size, conditions: totally reconditioned with warranty
This 3-axis WEMAS DZ 270 was manufactured in 2002. It features a turning diameter of 300 mm and a turning length of 754 mm. The machine is equipped with a HEIDENHAIN control unit and a 12-station disc turret from DUPLOMATIC, allowing for efficient tool management. If you are looking to get high-quality turning capabilities, consider the WEMAS DZ 270 horizontal turning machine we have for sale. Contact us for further details.
This 6-axis AMADA Wasino JJ3 was manufactured in 2007. It features a twin spindle, twin turret turning cell with a maximum spindle speed of 4000 rpm and a chuck size of 8â. The machine is designed for high-volume production with automatic loading and unloading capabilities. If you are looking to get high-quality turning capabilities, consider the AMADA Wasino JJ3 horizontal turning machine we have for sale. Contact us for further details.
This 3-axis WEMAS VZ 750 was manufactured in 2006. It features a HEIDENHAIN control unit with an iTNC 530 style interface, a T-slotted work table equipped with dual manual/hydraulic vises, and a mechanical spindle interface with coolant nozzles. If you are looking to get high-quality vertical machining capabilities, consider the WEMAS VZ 750 vertical machining centre we have for sale. Contact us for further details.
: gebraucht : WA0013 : 265 € : 1 : 835 mm : 80 mm : 12 mm mint condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Equipment Included - Wurster and Dietz OPTIMAT swing-stroke full gate saw, built circa 1970 - Splitting wedge - Cross conveyor - Roller conveyor - Sharpening machine - Setter - Wurster and Dietz Edge Saw FR 7, built circa 1965 Find more here - / Contact us at -
Excellent condition - Fully operational - Loading / Transport possible! The WDN0004 automatic edgebander has been designed for the hot use of pre-glued tapes for finishing linear and shaped panels. Thanks to this technology, the thickness between the edge and the panel is practically non-existent, allowing an excellent finish. Quick to register and start. In just 2 minutes the machine is ready to work. Product of the Italian brand Freutek, it is made with a scratch-resistant worktop and sturdy sheet metal structure, equipped with an automatic feeder. With double scrapers for a clean and glue-free result. Automatic facing of the front and rear excess edge. Equipped with auxiliary rollers located on the working base to obtain an optimal pressure of the panel on the gluing unit. it is equipped with a powerful 3.59 Kw motor for working. The Freutek WDN0004 is complete with protection agai ...
Rod line consisting of: Feeding system with agitated hopper Werner & Pfleiderer extruder ZSK model Ø53x33D twin-screw Manual filter changer, CFM75 model 10-strand + 6-strand rod granulation head TI400/4 4 M immersion tank Periplast dryer Granulator Screening
Robot type : W643 – 269 Control N° : CNC 6 – 2617 Year : 2004 Removal X – Axis : 1200 mm SER Standard Vertical Y – Axis : 2600 mm SER Standard Horizontal Z – Axis : 4500 mm SER Standard Placing C – Axis : 60NM-P 90 Rotation A – Axis : No Rotation B – Axis : 15,0NM-MOT 0-270
General SKU060Y349 MakeHermann Waldner GmbH Wangen No.W-3188 Year of construction1994 LocationBarneveld Specified Features - Stirring vessel Material finishPolished inside Pressure Working pressure1 Bar Working pressure jacket2.5 Bar Main Features MaterialStainless steel Volume568 Ltr. Motor0.88 KW Stirring vessels MaterialStainless steel 1.4435 (316L) Closed stirring vessel(1x) Capacity568 Ltr Vessel sizesdia. 800x900mm Dished bottomcheck Dished top sidecheck Manholedia. 250mm Top connections3x dia.35mm + 3x dia.45mm + dia. 60mm Outletdia. 50mm With jacket(60 Ltr) Max. temperature90 Degr. C. With propellor stirrermake Ekato, type EM-040 Motor0,55/0,88 KW, 400 Volt Speed mixing shaft498/975 Rpm Information Floorspace1,6x1,6 M Total height2,4 M Extra Specifications- Equipped with 3 CIP nozzles DiscountStirring vesselsHermann WaldnerDiscountStirring vessel ...
General SKU048W209 MakeWestfalia TypeSAK-20036 No.1643130 Year of constructionunknown LocationBarneveld Main Features MaterialStainless steel Motor30 KW Specified Features - Separator Separator(1x) Motor30,0 KW, 380 Volt Max. rotor speed4500 Rpm MaterialStainless steel Information Floorspace1,8x1,5 M Total height1,5 M Weight2000 KGDiscountSeparatorsWestfaliaDiscountCentrifuges > SeparatorsBrand > Westfalia What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
Horizontal turning machine manufactured in 1999. This Weiler E35 D features a Siemens Sinumerik 810D control with Weiler D1 user software and a 12.1-inch TFT color flat screen. It includes a coolant unit with a flow rate of 30 l/min and a tool holder for quick-change operations. If you are looking to get high-quality turning capabilities, consider the Weiler E35 D machine we have for sale. Contact us for further details.
used
A modular bucket filling and lidding system Wittmann Robot Systeme is available. Components: bucket stack feeding, bucket stack transfer unit, bucket singulation, rake and filling, stopper, lid feeding, lidding, lid inspection and rotation for the further conveying processes. Number of formats: 6, format distribution round/rectangular, round bucket diameter: 226mm, round bucket height: 194mm, min. rectangular bucket dimensions X/Y/Z: 195mm/299mm/170mm, max. rectangular bucket dimensions X/Y/Z: 302mm/415mm/220mm, bucket volume: 5l/6l/10l/11l/16l. Including the corresponding conveyor units and motors. Documentation available. An on-site inspection is possible.
turning diameter: 400 mm turning length: 1000 mm swing diameter over bed slide: 400 mm turning diameter over slide: 225 mm bed width: 433 mm spindle bore: 56 mm total power requirement: 7,4 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: 2,5 x 0,9 x 1,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
WMW MODUL ZFWZ 160/3 gear hobbing machine was built in 1971 in the GDR by VEB Werkzeugmaschinenkombinat 7. Oktober” Berlin. The machine is used in plants manufacturing extremely precise drive components for, among others, the automotive, aerospace and machinery industries. It enables the efficient machining of spur and worm gears with a maximum external diameter of 160 mm. The machining process is performed by means of a spindle with a cutter with a maximum diameter of 110 mm. The spindle of the MODUL ZFWZ 160X3 machine moves along the contour of the workpiece, cutting the material along its entire circumference. Using this method, it is possible to achieve the desired shapes and teeth finish with the highest accuracy. The WMW MODUL ZFWZ gear hobbing machine weighs 3000 kg. Technical specifications of the WMW MODUL ZFWZ 160/3 gear hobbing machine General data - maximum external di ...
This 3-axis WAFIOS BER-35 tube bending machine was manufactured in 2008. It is CE marked and has completed safety-technical approval, ensuring compliance with safety standards. If you are looking to get high-quality tube bending capabilities, consider the WAFIOS BER-35 machine we have for sale. Contact us for further details.
grinding diameter: 100 mm grinding length: 400 mm centre height: 100 mm z-axis: 425 mm table speed -stepless-: 0,05 - 5,00 m/min workpiece spindle head rotation speed: 90 - 1.000 U / min. grinding head swivelling: -2 - +30 Grad tailstock quill taper MT: 3 grinding wheel speeds: 1.800 / 2.000 U/min grinding motor: 3,70 kW dimensions of grinding wheel: 350 x 50 x 127 mm total power requirement: 7,00 kW weight of the machine ca.: 2,50 t dimensions of the machine ca.: 3,00 x 2,50 x H2,20 m With 2-axis digital display FAGOR, coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
abgel. Operating hours: 3120 h, with loading fork
Overview The Meheen M6 isobarometric filler from the American manufacturer Wild Goose was built in 2020. The machine was used very little. Technical Details Capacity: Up to 2.160 bottles per hour Number of filling heads: 6 Last used formats: 0,33l Longneck Possible bottle diameter: 5.3 cm - 7.6 cm Dimensions (Floor): 1680 mm x 1070mm
Filling Machine Manufacturer: Würschum Type VH 150 Volume Minimum 3 ml Maximum 150 ml Manual filling machine for pastes and creams
Overview This complete isobarometric filling line for sparkling wine was manufactured in 2022 by Italian manufacturers DUETTI, GAI, ROBINO & GALANDRINO, WIN&TECH and MAKRO. It is designed for premium sparkling wine in glass bottles and includes depalletizing, rinsing, isobaric filling, capping, wirehooding, capsuling, labelling, CIP and filtration. The line is still in production, has approx. 2,100 operating hours and can be visited on request. It will be available end of March 2026. Technical data Application: Sparkling wine (glass bottles) Capacity: Up to 4,500 bph Formats & Speeds: 0.187 L: 4,500 bph (4°C & 15°C) 0.375 L: 4,500 bph (4°C & 15°C) 0.750 L: 4,000 bph (4°C) / 2,900 bph (15°C) 1.500 L: 2,000 bph (4°C) / 1,500 bph (15°C) Operating hours: 2,100 Scope of Delivery Depalletizer | DUETTI | M Automatic | 2022 | — Rinser–Filler–Capper Monoblock | GAI | 4033 (16 ri ...
used
Manufacturer: ROBOCUT Type: Wire EDM Year of Manufacture: 2019 Find more here - / Contact us at -
Manufacturer: Wenzel Type: RS 1012 / CNC Year of Manufacture: 2003 Type: CNC Coordinate Measuring Machine Measuring Volume - X-axis measuring range: 2,000 mm - Y-axis measuring range: 1,000 mm - Z-axis measuring range: 1,200 mm Measurement Accuracy - Maximum permissible length measurement error (MPE): 15.0 micrometres + (L / 45.0 mm) micrometres - Maximum overall: 50.0 micrometres (valid across the entire measuring range) Probing System - Probe head: Renishaw PH10 M - Probing system type: Renishaw TP20 - Probing system number: 153R13 Find more here - / Contact us at -
el. cabinet. Documents are available. Capacity: app. 15-20.000 ltr/h Suitable for wine, beer
Overview This 5 Gallon Water Bottling filler was built in 2003 with proven technology by American manufacturer Steelhead. The machine is already dismantled, in storage and can be viewed in person. Techn. Details Capacity: 600 bph
This 3-axis Wenzel LH87 was manufactured in 2010. It features an X-axis travel of 800 mm, Y-axis travel of 1500 mm, and Z-axis travel of 680 mm, with a maximum table load of 1000 kg. The machine includes a Renishaw probe system and integrated rotary indexing table. If you are looking to get high-quality measurement capabilities, consider the Wenzel LH87 CMM machine we have for sale. Contact us for further details.
CMM machine manufactured in 2003. This JENOPTIK wave C8000 features a measuring height of ±20 mm and a measuring length of 120 mm. It includes a feed unit, a column, and operates on Windows 2000 with Turbo Contur software. The package comes with a PC tower, monitor, keyboard, mouse, printer, granite surface plate, and calibration accessories. If you are looking to get high-quality contour measuring capabilities, consider the JENOPTIK wave C8000 machine we have for sale. Contact us for further details.
Belt width gross: 920 mm, Description: Descending spiral, infeed at the top, outfeed at the bottom, Belt width nett: 880 mm, Tiers: 23 pcs., Link height: 80 mm, Product gap: 65 mm, Length per tier: 17.8 m, Belt length: 409 m, Refrigerant: NH3, ammonia, Evaporator size: 1800 m2, 975 L, Cooling power: 250 kW, Power: 3 x 400V, 50Hz, 64 kW
General SKU321S566 MakeWLS Gabler (D), Pressquick PQ 12 LocationBarneveld TypeE-60/10 D Main Features Motor3 KW Inlet diameter345 mm L/D3 Specified Features - Single screw extruder Single screw extrudercheck Screw diameter60mm, Screw length 180mm L/D3 With jacketcheck AC-motor3.0 kW, 220/380 Volt With variable speed drivecheck Screw speed9-89 Rpm Inlet345x250mm Feeding with hopper- incl. mixer MaterialStainless steel Information No.12355 Year of constructionUnknown With switchgearcheck Floorspace1.8 x 0.7 M Total height1.35 M Weight560 Kg Extra Specifications: Without die plate Single screw extrudersFood additivesWLS GablerExtruders > Single screw extrudersIndustries > Food & Feed > Food additivesBrand > WLS Gabler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination w ...
Liebherr WSC 1200____________Description:In General:Year of manufacture:2009Control system:Siemens 840 DExternal gear diameter:1,200 mmInternal gear diameter:1,200 mmMaximum gear width:260 mmMaximum workpiece diameter:1,500 mmMachine base:Travel:600 mmLateral adjustment:+/- 60 mmCutting head:Spindle diameter:125 mmTool holder:SK 45Distance between spindle and table:0–820 mmStroke length:270 mmMax. module:16 mmMax. tool diameter:300 mmMax. spindle speed:25 rpmTable:Table diameter:900 mmTable bore:320 mmBore depth:520 mmMax. speed:12 rpmMax. table load:95 kNEquipment:Chip removal:2 magnetic belt conveyorsCoolant supply:Cutting oil system with filter and temperature controlSet-up operation:Electronic handwheel
maximum number of results exceeded
please refine your search
14.500 € 
