gearbox w p used for sale

Werner Pfleiderer Double Conus Kneader used unfortunately no type plate available, we assume DK65, for which we do not guarantee Machine in condition as returned by the customer, was overhauled according to the previous owner smooth and smooth running, machine automatically switches to the second stage Timer adjustable for 3-30 minutes, head then lifts independently Machine also runs with the head open or can be lifted during operation, this should be corrected before use by means of limit switches The machine must be thoroughly cleaned before use Video about test run and other pictures available

Double head saw EMMEGI NORMA 400 TU/4 Screwing unit GEVO SE1-SA Double head welding machine URBAN AKS 1200 Single head welding machine PRESSTA EISELE APOLLO End milling machine HAFFNER AF 362 Drain slot milling machine ROTOX FWS 380 Copy router STB F130/S Corner cleaning machine STB WP-OF2 Glazing bead saw HAFFNER GL 172

ORDER NO. 6623 TECHNICAL DATA - diameter range of machined pins 200mm - min length of input material 1100mm - infinitely variable feed speed + front/rear - knife head drive motor 15kW - feed motor 1,7kW Successively: - 2 toothed pulling shafts - 4-knife head - 2 smooth pulling pin shafts - electrically adjustable knife head - electrically adjustable shafts - dimensions length / width / height 3570x1300x1700mm - weight about 4000kg ADVANTAGES – German production - the possibility of turning poles into a cone – used turner, very good condition Net price: 159900 PLN Net price: 35533 EUR depending on the price 4,50 EUR (Prices may fluctuate with higher fluctuations)

; Gross weight [kg]: 818; Engine: Perkins 1103A-33G1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including: 125 liter fuel tank capacity; Water Tank Volume [l]: 125

In-store oven Quail Mini Thermic Plus 10 - Quail Mini Thermic Plus 10 hot air oven - Ovens 5+5 controllable - for 5 + 5 baking trays 60x40cm - Door stop on the right - elek. Power supply: 18.2 kW - with proofing cabinet - Control: Shopmatic 5 Plus Timer - 400 Volt AC /3Ph/N/PE/ 50Hz - Year of construction 10 / 2008

Shared oven WP Matador Store 6.4 A used electrically heated shared oven WP Matador Store 6.4 for bakery and confectionery is currently for sale and immediately available in our warehouse in Bielefeld. The stove is equipped with base and exhaust hood. Floor oven W&P Matador Store 6.4 - 4 floors each 60x40cm -per floor one sheet 60x40cm -1 x Hood 8 x ADK with RBA 0.1 kW 230 Volt - 1x base 6.4 600 - with exhaust air hood including vapour condenser -electrical data per floor: 3.6kW; 3-400V; 1.45 kW - Year of construction External dimensions approx. Width : 93cm Depth 100cm Height: 210cm incl. hood Floor entrance height 14cm Oven is functionally tested and cleaned -Oven can be inspected and tested in our warehouse

turning diameter over bed: 1100 mm turning diameter over slide rest: 780 mm turning length: 4100 mm Control: Siemens type: 840 D bed width: 710 mm faceplate: 1000 mm turning speeds: 1110 U/min total power requirement: 4,79-69 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0339 Brand: WEINIG Model: PROFIMAT 23/E - CE Standard Automatic 5-spindle moulding machine for the production of frames, furniture parts, windows, doors, moldings, broom handles, wooden toys, and various - CE Standard Features: Heavy-duty base made of solid cast iron Chainless cardan feed: precise, robust, and durable Special feed roller teeth that reduce the depth of entry into the wood Compact feed system Pneumatic pressure on the feed rollers DIGISET WEINIG for left and upper spindles: tool adjustment is performed directly via dual digital displays Technical data: Min/max working width 20/230 mm Max working height mm 120 Feed speed variator 5–24 mt/min Shaft diameter mm 40 Shaft speed rpm 6000 Feed roller diameter 140 mm Pre-planing table length 2000 mm Soundproofing and full protective coating Motorized vertical feed adjustment Side roller pressur ...

- for the production of sliced rolls, smooth rounds, long rolled rolls and double pieces Year of construction: 2007 Weight range: 30-85 g Hourly output: max. 3,000 pieces 4-row system with 600 mm working width Integrated dough divider and drum transformer, Multimatic Pre-fermentation time 12 min (6 min before long roll station and 6 min between long roller and cutting station)Hanger drying Variable depositing device for digestate carriers of 3 Euro sizes: 400x600 / 580x780 / 580x980 mm UV Disinfection StationSiemens Touch Screen Control External dimensions (LxWxH): 3000x1250x2550 mm

LADENOFEN RUSTIKAL - GEBRAUCHT. FÜR WEITERE INFORMATIONEN KONTAKTIEREN SIE MICH BITTE

--> with discharge screw; Volume : 110 ltr. Drive : 15 KW Drive screw discharge : 7,5 KW Material : Mild steel Weight: 3000 kg Dimensions : L 2.60 m x W 1.60 m x H 1.80 m.

--> Tilting kneader with double jacket Material : wetted areas in stainless steel Volume : 260 ltr. Usable volume: 200 ltr. Dimensions: L 2.60 m x W 1.20 m x H 1.35 m.

--> tilting kneader, with double jacket; Material : wetted areas in stainless steel Volume : 210 ltr. Usable volume: 160 ltr. Dimensions : L 2.40 m x W 1.15 m x H 1.35 m;

Drive : 200 KW Volume : 90 ltr. Usable volume: 63 ltr. Bucket speeds : 45.5 / 41.2 rpm Drive : 200 KW Engine speed : 1500 rpm Weight: ca. 11,5 to Weight gearbox: approx. 2950 kg.

Brotschneidemaschine verwendet. Sehr guter Zustand.

Metal band saw blade, band saw blade, metal saw band -Manufacturer: Wespa, metal saw band Bitec M42 Plus unused -Dimension: 2450x27x0.90 mm 4/6 -Number: 7x sheets available -Price: per piece -Weight: 0.5 kg/piece

Metal band saw blade, band saw blade, metal saw band -Manufacturer: Wespa Bitec Plus metal saw band unused -Dimension: 4250x34x1.10 mm 4/6 -Number: 5x sheets available -Price: per piece -Weight: 1.3 kg/piece

Refer to code 1004 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1006 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1013 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1001 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Qty. 1 Second-hand wall paper production line – already dismantled & in warehouse Mfc.: Shin Shang Built: 1998 New electrical incl. cables in 2019 Production stopped in 2/2023 In line system Printing width: 850 mm 6 colors printing station Hot embossing system PVC coating system Six colors high speed paper roll CI flexo printing machine Automatic high speed flexo printing machine High speed CI type Central Drum 6 Colors Flexographic Printing Machine for paper OPP/ BOPP/ PP plastic film rotogravure printing machine

Batch / spiral kneader W&P, type: UC50 AC -overhauled- - including 2 tank cars - for 50 kg flour or 80 kg dough - for mischweizen and mixed rye dough - in bakery condition - very nice condition, immediately ready for use - Video with kneader in function on request Inspection and test run are of course possible at any time by arrangement. The machine has been tested and is ready for immediate use.

Stock# U824V-1 Used butterfly type valve by ChemValve (CH) with DIN 300, PN10. Carbon steel design. Contact parts layered with teflon. Valve is operated pneumatically. Valve type PTSGWA1-WD1.

amount: 36 STK. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tamper Evident labelling machine for applying labels to both sides of folding boxes. Machine incl. PCE Pharmacontrol Pilot 4.1.0. which controls and manages units such as printer, cameras and scanner. Labeller is fitted with WOLKE Printer

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 6 mm -Inside: Ø 32 mm -Number of teeth: 132 teeth -Number: 19x saw blades available -Price: per piece -Weight: 10,1 kg/piece

Weibert W7-32 Profi 5-fold station wagon Planer width: 320mm Cutting length 2100mm Milling stop for tool max. D=220mm 3 motors 3kW Price 6975,-€ excl. VAT Price 8300,-€ with VAT.

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ---------------------------------------------------------------------- - Short summary: ---------------------------------------------------------------------- - 6 spindles with 8,000 rpm 5 x HSK/Powerlock Axial and radial CNC adjustment of the spindles via control CNC - controlled adjustment and positioning of the feed Detailed description: ---------------------------------------------------------------------- - Technical specifications: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 6 1. Tool holder - below ------------------------------------------------ Motor with brake: 5.5 kW Spindle diameter: 40mm Speed: 6,000 rpm Tool flight circle: 93 - 160 mm ...

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 6 mm -Inside: Ø 32 mm -Number of teeth: 88 teeth -Weight: 9,5 kg

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 6 mm -Inside: Ø 32 mm -Number of teeth: 176 teeth -Number: 20x saw blades available -Price: per piece -Weight: 10 kg/piece

Deck oven Wachtel Piccolo I-5 DMS 3 Master EM 100 glass - 5 floors each 80x60 - each floor with separate control - Top and bottom heat can be controlled separately - each floor with a separate steam box - Floor entrance height: 14cm - with proofing cabinet - with exhaust hood - Floor entrance height top floor 20cm - Floor entrance height lower 4 floors each 14cm - Year of construction: 12 / 2014 - Electrical connected load: 23.7 kW - Voltage: 400V AC/3Ph/N/PE/50Hz External dimensions approx.: 118cm width 116cm depth without exhaust hood 230cm height

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 500 x 6 mm -Inside: Ø 50 mm -Hole circle: Ø 100 x 17 mm -Number of teeth: 160 teeth -Number: 8x saw blades available -Price: per piece -Weight: 6 kg/piece

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 500 x 6 mm -Inside: Ø 50 mm -Hole circle: Ø 100 x 18 mm -Number of teeth: 120 teeth -Weight: 6 kg

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 6 mm -Inside: Ø 80 mm -Hole circle: Ø 120 x 22 mm -Number of teeth: 88 teeth -Number: 4x saw blades available -Price: per piece -Weight: 10,4 kg/piece

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade -Manufacturer: WMW PWS, saw blade Ø 500 x 6 mm -Inside: Ø 50 mm - Bolt circle: Ø 100 x 17 mm -Number of teeth: 80 teeth -Number: 4x available -Price per piece -Weight: 5.7kg/pcs

More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Wartsila 8L32 Oil Pump 1Piece available in our stock in Turkey Model: 1v18L36 Original in good condition

Thin-cut creel Wintersteiger type DSG Eko Plus Specifications: • Cutting height (mm): 200 • Cutting width (mm): 200

A Weiler Primus precision lathe with milling device is offered and extensive accessories in very good condition. A large part of the accessories are unused. Specifications: Center height 120 mm Distance between centers 420 mm Swing diameter over bed 245 mm Spindle bore 23 mm Spindle speeds 18 Speed range 60 - 3000 rpm Motor power 1.1 / 1.5 kW Motor spindle brake Large feed protection - chip protection hood External dimensions approx. Length 120cm Depth 750mm Height 170cm Weight approx. 500 kg Accessories: Multifix A - 5 steel brackets 3-jaw chuck Ø 125 mm 4-jaw chuck Ø 125 mm Various interchangeable jaws Thumper CGN-1969 Eccentric lathe chuck 80mm (unused) Face plate Carrier for rotary heart Standing bezel Moving bezel Collets for internal and external clamping Various moving bezels Extensive accessories for milling equipment such as clamping screws, cl ...

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 135 mm -Piston rod: Ø 60 mm - Stroke: 1020mm -Max. Pressure: 175 bars -Number: 2x available -Price per piece -Dimensions: 1660/235/H200 mm -Weight: 130kg

Kegelrundwirke, Fabr. W & P, Type CR 59-M

Deck oven, Fabr. Quail, Piccolo 1

Hebekipper, Fabr. W & P, Type HKL 1600

Fieldbus, Profibus, PLC control, automation technology, controls and regulators -Fieldbus coupler type: 750-333 -Bus terminals: 19 (14x750-403/4x 750-504/1x750-600) -Dimensions: 280/100/H65 mm -Weight: 1 kg

Boekels EWK 1500 PLUS WS1,25kSD inline checkweigher with reject device, weight range up to 1500 g (working weight up to 1250 g), calibration value e=0.2 g, accuracy +/- 0.2 g, belt width approx. 150 mm, length of infeed belt approx. 300 mm, length of outfeed belt approx. 300 mm, length of weigh cell approx. 300 mm, belt speed up to. 0.5m/s, capacity up to 100 weighings per minute, electrics 230V/50Hz, connected load 600 VA, machine floor space approx. 1050 x 1020 mm (WxD), machine height approx. 1700 mm, machine net weight approx. 245 kg