gear testing used for sale

CENTRALIZED LUBRICATION GEAR PUMP #5370 Reservoir Capacity: 15 l Flow rate: 0,5 l/min

Glue application with gearbox Make: IMA - glue application 04.088 - gearbox 04.156

Max. table load: 8t, diameter table: 2000m, max. wheel diameter wheel: 720mm, pressure angle: 12.5-30°, max. bevel angle: 35°, diameter grinding wheel: 300mm/400m, peripheral speeds: 25 or 35m/s, grinding stroke: 750mm, number of teeth: 12-372, length: 6800mm, width: 5500mm, height: 3800mm, weight: 26t, was modernized in 2000 and equipped with CNC control, with documentation, on-site inspection is possible.

Drive rotational speed: 1.9/min, torque: 2300Nm, Anschlussleistung: 1,1kW.

variable speed, table can turn 360° table can tilt

There are three identical gearboxes available, one has been completely overhauled, the other two were in use until the end and are also in working order, an on-site inspection is possible.

Diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Work capacity:max. diameter: 36 mm max. module: 1.00 Workpiece length max.: 80 mm Pitch min.: 6 max.: 200 Axes distance between work- piece and tool: max: 30 mm Gear hob: max. diameter: 36 mm Max. milling cutter displac.: 50 mm Milling cutter speeds: number (steps): 8 from: 660 rpm up to: 5300 rpm Voltage 50 Hz 3x: 380 Volt Power: 0.60 HP Total power required: 1.5 HP Machine´s weight about: 450 kg Overall dimensions machine: Length: 780 mm Width: 730 mm Height: 1380 mm Various accessories: Loader Wahli Type: 41 W Lamp

Power: 211 kW - Ratio: 71:1 - RPM in/out: 1.485 / 20,9 - Shaft ø in: 70 mm. - Shaft ø out: 190 mm.

UNUSESD - Power: 75 kW - Voltage: 230 / 400V. - Amperage: 240 / 137A. - Hertz: 50 Hz. - Ratio: 8,26:1 - RPM in/out: 1.480/179 RPM - Shaft ø out: 110 mm - Weight: 887 / 952 KG

Diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Work capacity:max. diameter: 120 mm max. module: 2 Workpiece length max.: 130 mm Pitch min.: 6 max.: 325 Spiral lead: from: 2 mm up to: 5000 mm Spiral lead angle: from: 0 ° up to: 89 ° Milling cutter speeds: number (steps): 14 from: 140 rpm up to: 1870 rpm Feeds: number (steps): 13 from: 0.05 mm/min up to: 3.0 mm/min Voltage 50 Hz 3x: 380 Volt Power: 0.75 kW Total power required: 0.85 kW Machine´s weight about: 800 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 1600 mm

Diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Work capacity:max. diameter: 120 mm max. module: 2 Workpiece length max.: 130 mm Pitch min.: 6 max.: 325 Spiral lead: from: 2 mm up to: 5000 mm Spiral lead angle: from: 0 ° up to: 89 ° Milling cutter speeds: number (steps): 14 from: 140 rpm up to: 1870 rpm Feeds: number (steps): 13 from: 0.05 mm/min up to: 3.0 mm/min Voltage 50 Hz 3x: 380 Volt Power: 0.75 kW Total power required: 0.85 kW Machine´s weight about: 800 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 1600 mm

Diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Work capacity:max. diameter: 10 mm max. module: 0.5 Workpiece length max.: 35 mm max. gear wheel width: 15 mm Pitch min.: 6 max.: 180 Axes distance between work- piece and tool: min.: 0 mm max: 28 mm Gear hob: max. diameter: 24 mm Milling cutter speeds: number (steps): 6 from: 850 rpm up to: 4500 rpm Voltage 50 Hz 3x: 380 Volt Power: 0.32 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 630 mm Width: 530 mm Height: 1350 mm

Diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Work capacity:max. diameter: 36 mm max. module: 1.00 Workpiece length max.: 80 mm max. gear wheel width: 50 mm Pitch min.: 6 max.: 200 Milling stroke: 10 mm Gear hob: max. diameter: 32 mm Milling cutter speeds: number (steps): 8 from: 660 rpm up to: 5300 rpm Feeds: stepless up to: 60.0 mm/r Voltage 50 Hz 3x: 380 Volt Power: 0.70 HP Total power required: 1.2 HP Machine´s weight about: 680 kg Overall dimensions machine: Length: 800 mm Width: 800 mm Height: 1400 mm Various accessories: Coolant system

Diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Work capacity:max. diameter: 120 mm max. module: 2 Workpiece length max.: 130 mm Pitch min.: 6 max.: 325 Spiral lead: from: 2 mm up to: 5000 mm Spiral lead angle: from: 0 ° up to: 89 ° Milling cutter speeds: number (steps): 14 from: 140 rpm up to: 1870 rpm Feeds: number (steps): 13 from: 0.05 mm/min up to: 3.0 mm/min Voltage 50 Hz 3x: 380 Volt Power: 0.75 kW Total power required: 0.85 kW Machine´s weight about: 800 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 1600 mm Various accessories: Sprinkle cooling device Set of gears Tool cabinet

Diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Work capacity:max. diameter: 35 mm max. module: 1.00 Workpiece length max.: 22 mm Gear hob: max. diameter: 24 mm Milling cutter speeds: stepless from: 850 rpm up to: 5200 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 600 kg Overall dimensions machine: Length: 800 mm Width: 800 mm Height: 1450 mm Various accessories: Automatic loader Lamp

Diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Work capacity:max. diameter: 10 mm max. module: 0.5 Workpiece length max.: 35 mm max. gear wheel width: 15 mm Pitch min.: 6 max.: 180 Axes distance between work- piece and tool: min.: 0 mm max: 28 mm Gear hob: max. diameter: 24 mm Milling cutter speeds: number (steps): 6 from: 850 rpm up to: 4500 rpm Voltage 50 Hz 3x: 380 Volt Power: 0.32 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 630 mm Width: 530 mm Height: 1350 mm Various accessories: Loader Wahli Type: 38 W Lamp

Diameter: 0 mm CNC Brand: 0 CNC Model: 0 Control: HUAWIN (FANUC / SIEMENS optional) Technical data Work capacity:max. diameter: 60 mm max. module: 1 / 1.5 Pitch min.: 6 max.: 390 Max. milling cutter displac.: 60 mm Milling cutter speeds: from: 300 rpm up to: 3000 rpm Max. milling head inclination: +/- 45 ° Feeds: axial from up to: 1000 mm/min radial from up to: 1000 mm/min Power: 0.75 kW Machine´s weight about: 1250 kg Overall dimensions machine: Length: 1800 mm Width: 1730 mm Height: 2300 mm Various accessories: Set of gears Lamp Coolant system

Diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Work capacity:max. diameter: 35 mm max. module: 1.00 Workpiece length max.: 22 mm Gear hob: max. diameter: 24 mm Milling cutter speeds: stepless from: 850 rpm up to: 5200 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 600 kg Overall dimensions machine: Length: 800 mm Width: 800 mm Height: 1450 mm

Diameter: 0 mm CNC Brand: 0 CNC Model: 0 Control: ADVANTAGE 400 / ISO / 5 Axis Technical data Work capacity:max. diameter: 40 mm max. module: 1 (0.8) Workpiece length max.: 80 mm max. gear wheel width: 50 mm Working way: X axis: Quill 15 mm Y axis: 30 mm Z axis: 30 mm Milling stroke: 10 mm Gear hob: max. diameter: 24 mm Milling cutter speeds: number (steps): 8 from: 500 rpm up to: 6000 rpm Feeds: stepless up to: 2000 mm/min Voltage 50 Hz 3x: 400 Volt Total power required: 1.2 HP Total power required: 4 kVA Machine´s weight about: 600 kg Overall dimensions machine: Length: 1300 mm Width: 1000 mm Height: 1700 mm Various accessories: Loader Wahli Type: 20 W

Diameter: 0 mm CNC Brand: 0 CNC Model: 0 Control: SYNTEC 200TB (NEW 2019) Technical data Working range: Module from: 1 up to: 5 Max. wheel diameter: 250 mm Max. gear cutting width: 70 mm Table diameter: 320 mm Drill diameter of the table: 125 mm Max. ram stroke: 100 mm Distance ram to table: from: 190 mm up to: 290 mm Taper in ram: 40 ISO Ram stroke speeds: from: 100 s/min up to: 1200 s/min Voltage 50 Hz 3x: 380 Volt Drive: 36 kW Machine´s weight about: 10000 kg Overall dimensions machine: Length: 4500 mm Width: 3200 mm Height: 2900 mm Equipment: Retrofited control: 2019 Helical gearing Mise en conformité CE

Diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Work capacity:max. diameter: 45 mm max. module: 1.00 max. gear wheel width: 45 mm Pitch min.: 6 max.: 180 Milling cutter speeds: number (steps): 8 from: 900 rpm up to: 4000 rpm Voltage 50 Hz 3x: 380 Volt Power: 0.50 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 600 mm Width: 500 mm Height: 1300 mm Various accessories: Coolant system Dividing plates

Gear motor Erag AG SKF 0.25 kW 1390 rpm Reduction ratio 1 : 80 Output speed 17 rpm The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Gear motor Lenze Gear ratio 1:20.044 Power 1.5 kW Engine speed 3450 rpm The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

MAX DIAMETER 800,MAX MODULE 14

MAX DIAMETER 750,MAX MODULE 10

MAX DIAMETER 800.MAX MODUL 10 , MAX STROCE 200

one fixed unit and one movable unit (X-travel: 3000 mm) both units have manuals clamps variable turning speed center height: 1000 mm max swing of workpiece: 2000 mm cap with both units: 6000 kg cap with one unit: 3000 kg

MAX DIAMETER 320 MAX MODUL 6

MAX DIAMETER 320 MAX MODUL 8

Technical data Max. diameter: 36 mm Max. module: 1 Max. gear width: 50 mm Pitch min.: 6 max.: 200 Speeds: number (steps): 8 from: 660 rpm up to: 5300 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 445 kg Overall dimensions machine: Length: 800 mm Width: 800 mm Height: 1400 mm Various accessories: Loading attachment: W 25

Technical data Max. diameter: 36 mm Max. module: 1 Max. gear width: 50 mm Pitch min.: 6 max.: 200 Speeds: number (steps): 8 from: 660 rpm up to: 5300 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 445 kg Overall dimensions machine: Length: 800 mm Width: 800 mm Height: 1400 mm Various accessories: Loading attachment: W 25

Technical data Max. diameter: 36 mm Max. module: 1 Max. gear width: 50 mm Pitch min.: 6 max.: 200 Speeds: number (steps): 8 from: 660 rpm up to: 5300 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 445 kg Overall dimensions machine: Length: 800 mm Width: 800 mm Height: 1400 mm Various accessories: Loading attachment: W 25

Technical data Max. diameter: 40 mm Axial distance from work-piece to tool: min.: 16 mm max: 30 mm Speeds: number (steps): 4 from: 800 rpm up to: 3200 rpm Voltage 50 Hz 3x: 380 Volt Power: 0.58 kW Machine´s weight about: 400 kg Overall dimensions machine: Length: 800 mm Width: 800 mm Height: 1300 mm Various accessories: Loading attachment: W 19

Technical data Max. diameter: 40 mm Axial distance from work-piece to tool: min.: 16 mm max: 30 mm Speeds: number (steps): 4 from: 800 rpm up to: 3200 rpm Voltage 50 Hz 3x: 380 Volt Power: 0.58 kW Machine´s weight about: 400 kg Overall dimensions machine: Length: 800 mm Width: 800 mm Height: 1300 mm

Control: IBH MICRO 2 Technical data Work capacity:max. diameter: 150 mm max. module: 3.0 / (2.5) Workpiece length max.: 300 mm Gear hob: max. diameter: 90 mm min. diameter: 130 mm Max. milling cutter displac.: 250 mm Milling cutter speeds: from: 0 rpm up to: 1500 rpm Max. milling head inclination: 50 / 50 ° Feeds: from: 0 mm/min up to: 3500 mm/min Voltage 50 Hz 3x: 380 Volt Total power required: 20 kVA Machine´s weight about: 5000 kg Overall dimensions machine: Length: 4040 mm Width: 3480 mm Various accessories: Automatic loader Coolant system Chip conveyor Shifting hob head

Diameter: 400 mm Klingelnberg - AFK 151 Spiral bevel gear cuting machine Ø 400 x Mod 6 MACH - ID 6237 Make: Klingelnberg Type: AFK 151 YOP: 1960 Max. Diameter   400 Ø Modu    l6 mm Dimensions Length    3.000 mm Width      2.200 mm Height     2.000 mm Weight     6.900 kg

Diameter: 500 mm Module: 6 mm Axial travel: 0 mm MACH-id    5215 MAKE        TOS CZ TYPE          OHO 50 YOP SPECIFICATIONS External workpiece Ø Max. 500 Ø  Max. Modul Max.     6 Weight approx.     100 Kg Max. Workpiece height      125 mm Speeds / ranges      355 Rpm Power      4 kW DIMENSIONS Length       2000 mm Width        1000 mm Height      2000 mm

Self-aligning rotators capacity driven unit: 60 ton capacity non-driven unit: 60 ton minimum diameter of workpiece: 500 mm maximum diameter of workpiece: 5500 mm roller dia: 559 mm roller width: 127 mm WELDINGMANIPULATOR FOR CYLINDRES: yes Max weight on both supports: 120 ton Coating material on wheels: rubber Length: 3100 mm Width: 1100 mm Height: 2530 mm

Self-aligning rotators capacity driven unit: 20 ton capacity non-driven unit: 20 ton minimum diameter of workpiece: 450 mm maximum diameter of workpiece: 4600 mm roller dia: 381 mm roller width: 76 mm WELDINGMANIPULATOR FOR CYLINDRES: yes Max weight on both supports: 40 ton Coating material on wheels: rubber Length: 2884 mm Width: 840 mm Height: 2010 mm

Self-aligning rotators capacity driven unit: 20 ton capacity non-driven unit: 20 ton minimum diameter of workpiece: 450 mm maximum diameter of workpiece: 4600 mm roller dia: 381 mm roller width: 76 mm WELDINGMANIPULATOR FOR CYLINDRES: yes Max weight on both supports: 40 ton Coating material on wheels: rubber Length: 2884 mm Width: 830 mm Height: 2010 mm

External gears workpiece diameter, max.: 130 mm Gear width: 25 mm Module, max.: 4 mm Control: SINUMERIK 840 D Spindle rotational speed: 0 - 30 U/min Helix angle: +/- 45 ? Radial slide travel X: 230 mm Y-axis (column - cross): +/- 25 mm Stroke length max.: 30 mm table turning speeds: 0 - 1000 U/min ram strokes 500 - 2500 Hub/min total power requirement 49 kW Machine Weight: 11500 Kg Required space (W x D x H) mm: 6400 x 4500 x 4400

External gears workpiece diameter, max.: 130 mm Gear width: 25 mm Module, max.: 4 mm Control: SINUMERIK 840 D Spindle rotational speed: 0 - 30 U/min Helix angle: +/- 45 ? Radial slide travel X: 230 mm Y-axis (column - cross): +/- 25 mm Stroke length max.: 30 mm table turning speeds: 0 - 1000 U/min ram strokes 500 - 2500 Hub/min total power requirement 49 kW Machine Weight: 11500 Kg Required space (W x D x H) mm: 6400 x 4500 x 4401

Bevel gear motor, G50BB124MHAR2C, 401r/min, 68Nm, Lenze, mint condition If you have a VAT number, we will gladly issue an invoice without VAT. As good as new! The part was disassembled from a new unit that was not put into operation. - Bevel gear motor G50BB124MHAR2C, 401r/min, 68Nm, I=3,565 - Motor MDEMABS100 32C0C, 0,55KW, 1430r/min, - Bore for shaft D30mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Gear motor SEW Through hollow shaft 50 mm Motor 1.5 kW Reduction 94.93:1 Output speed 15 rpm In good condition, ready for use Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Rotary gearbox Handtmann 34-4, new bearings, sealing rings and belts, used, good condition

Very good condition, with change gears and accessories, new belts, new diamond dressers, preparation for oil filtration new.

Gear hobbing machine 53A50H, STANKO, with change gears

Gear slotting 5140, Russia production, with change gears

Automatic hobbing machine make MORAT type B 9for milling gears with spur toothinggr. workpiece diameter Magazine guide: 20 mmGr. workpiece diameter without magazine guide: 70 mmkl. Workpiece diameter: 1.5 mmgr. milling length: 40 mmgr. number of teeth to be milled: up to 360kl. number of teeth to be milled: 5Gr. Division: Module 1kl. Division: Module 0.1Pliers tension: 0.5 - 12 mmMain engine power: 0.5 hpPower return motor: 1/6 hpPower magazine engine: 1/6 hpWeight approx: 400 kgWith- compl. Change gear kit- 1 slider insert each- 1 additional gearbox for mehrgg. snails- 1 spindle insertdespite year of construction in very good, well-kept conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your querie ...

Gear milling machine / gear hobbing machine make NILES type RF 6 M 15Lizensbau Pfauter Chemnitz, year of construction unfortunately not visibleTechnical specifications:Wheel diameter to be milled for spur gears: 1500 mmmax. Milling to be milled: 15 Mod.Range of helical gear drm. at10 ° spiral approx.: 1500 mm20 ° spiral approx.: 1500 mm30 ° spiral approx: 1350 mm40 ° spiral approx.: 1060 mm45 ° spiral approx: 900 mm50 ° spiral "750 mm60 ° spiral approx.: 450 mmBurr turns per minute: 20-26-33-43-56-71-90-118gr. Outer diameter of the milling cutter: 200 mmDrm. Milling mandrels: 27-32-40 mmDrm. of the workpiece clamping mandrel: 60 mmRotation of the drive pulley on the machine per minute: 520Drm. the drive pulley on the machine: 500 mmWidth of the drive pulley on the machine: 130 mmPower requirement: 10 hpRotation of the engine: approx. 1000 rpmExternal dimensions of the machine: 320 ...