138,264 used machines on RESALE, but how to find them? Machine Search
Auction-ID: A1-50275-96
For sale is a used gear hobbing machine from the manufacturer Staehely. The machine is offered including the accessories and tool stock shown in the pictures. Manufacturer: Staehely Machine Type: Gear Hobbing Machine Condition: used Scope of delivery: Machine including accessories shown A viewing by prior appointment is possible. If you are interested or have any questions, please do not hesitate to contact us. Errors, changes and prior sale reserved.
Auction-ID: A1-50275-187
Auction-ID: A1-50275-184
Type: F7 Variant: 3002 Version: 5FARB3 Category: N1 – commercial vehicle Body: pickup truck First registration: 29/11/2016 Fuel: Diesel Displacement: 1,598 cm³ Engine: Renault R9M A4 Number of cylinders: 4 Power: 85 kW / 115 hp Maximum power speed: 3,500 rpm Gearbox: Manual Transmission: Front Wheel Drive Maximum speed: 168 km/h Environmental standard: Euro 5 M CO₂: 170 g/km Color: Black Number of doors: 5 (1 left, 2 right, 2 rear) Number of seats: 3 The 1.6 CDTI engine with 85 kW corresponds well to the 115 hp version, with 4 cylinders and 1,598 cc. Dimensions and weight Length: 4.999 mm Width: 1.956 mm Height: 1.951 mm Wheelbase: 3.098 mm Indicated unladen weight / in running order: 1.740 kg Actual weight: 1.901 kg MMA: 2.740 kg Maximum mass of the set: 4.740 kg Braked trailer: 2,000 kg Unbraked trailer: 750 kg Vertica ...
Auction-ID: A1-50275-88
Set of 8 REXROTH geared motors. Power: 0.35 kW Reference: 3842541310 Auction-ID: A1-49938-53
Auction-ID: A1-50275-68
Set of 8 REXROTH geared motors. Power: 0.35 kW Reference: 3842541310 Auction-ID: A1-49938-54
Warning: damaged car in terms of bodywork sold as is Type: AW 1st registration: 18/12/2017 Mileage at checkpoint: 149,337 km Fuel: Gasoline Engine : 1.0 TSI Displacement: 999 cm³ Engine: 3-cylinder in-line, turbo petrol Power: 70 kW / 95 hp Maximum power speed: 5,000 rpm Transmission: Front Wheel Drive Gearbox: manual, this 70 kW configuration being offered with a 5-speed gearbox Euro standard: Euro 6 W indicated on the document Number of places: 5 Number of doors: 5 Color: White Length: 4,053 mm Width: 1,751 mm Height: 1,431 mm Wheelbase: 2,551 mm Operating weight: 1,145 kg Actual mass: 1,172 kg GVW / GVW: 1,560 kg Maximum set weight: 2,560 kg Braked trailer: 1,000 kg Unbraked trailer: 570 kg Maximum load on hitch: 50 kg Maximum indicated speed: 187 km/h Visible approved tyres: 185/65 R15 88H Belgian papers: yes Technical inspec ...
Auction-ID: A1-50275-75
Auction-ID: A1-50275-103
Auction-ID: A1-50275-104
Auction-ID: A1-50275-91
Gearbox Type: AME20TD Engine type: ZBF 71 A 8 B003 Auction-ID: A1-50275-181
Model: Rapid, Hatchback / Spaceback Type: NH Variant: ABCXMA Version: NFM5FM52R029STN762SK 1st registration: 26/05/2016 Fuel: Diesel Engine: 1.6 TDI Displacement: 1,598 cc Power: 85 kW / 116 hp Number of cylinders: 4 Torque: about 250 Nm Transmission: manual, 5-speed Transmission: Front Wheel Drive Environmental standard: Euro 6b Number of places: 5 Number of doors: 5 Maximum speed indicated on the papers: 198 km/h Operating weight: 1,275 kg MMA: 1,735 kg Belgian registration: 1BIB984 Papers : Belgian Mileage Odometer on the photo: 280,437 km The technical inspection of 23/05/2025 indicated 227,023 km. Audited on: 23/05/2025 Valid until: 26/05/2026 Defect to watch out for: deformation of an exterior body panel. Auction-ID: A3-46164-35125
max. wheel diameter: 1600 mm gear width: 560 mm max. module: 16 workpiece weight max.: 7000 kg table surface area: 1350 mm turning speed range: 16 - 80 U/min feeds - axial: 0,05 - 1,5 mm/min feeds - radial: 0,25 - 6 mm/min feeds - tangential: 0,13 - 4 mm/min electrics - voltage/frequency: 380/50 V/Hz total power requirement: 12 kW weight of the machine ca.: 18,5 t dimensions of the machine ca.: 4260 x 2555 x 3170 mm - universal Hob head - tangencial head (extra) - outer steady - change gears - 1 set big and 4x small clamping pods - arbors and approx 20 cutters (diffent Moduls) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Schlang & Reichart DW 61 XL – Gear Winch – New • Manufacturer: Schlang & Reichart • Model: DW 61 XL • Machine type: Geared winch / forestry winch • Condition: New • Three-point hitch: CAT II Standard equipment: • Pulling force lower rope layer: 61 kN • Pulling force upper rope layer: 54 kN • Maximum rope capacity: 174 m x 11 mm • Recommended max. rope capacity: 150 m x 11 mm • Special forestry rope: 11 mm x 70 m • Average rope speed at 540 rpm: 0.57 m/s • Own oil supply via piston pump with suction filter • Multi-disc sintered multi-plate clutch • Multi-disc sintered multi-disc brake • Worm gear 14.5:1 in oil bath • Spur gear for rear mounting • PTO shaft • Protective grille according to UVV • Large hinged protective grille in ruby red RAL 3003 • Towing clutch • Canister holder • Chainsaw holder • S+R E ...
22 kW - 42 A IM M1B gearbox Auction-ID: A1-50490-12
Gedreven Toerental : 60 - 1250 tpm Diameterbereik : 2700 - 6500 mm 4 in stock Max weight on both supports: 25 ton Adjustable in height: yes Number of wheels: 4 Motorpower: 20 kW / 16A Voltage: 3 x 400V Weight: 1290 kg
Auction-ID: A1-50275-54
Auction-ID: A1-50275-34
Auction-ID: A1-50529-643
Auction-ID: A1-50275-67
Auction-ID: A1-50275-1
Auction-ID: A1-50275-12
Geared motor with sprocket incl. switching forward/backward motor approx. 3 KW see pictures Condition: untested (6) Auction-ID: A7-50523-922
John Deere 3650 – Transmissions / Transmission Components Manufacturer: John Deere Model No.: 3650 Component: Gearbox / Gearbox Components Multiple transmission shafts Various helical gears and gear sets Gear shafts / countershafts Synchronous and switching elements Synchronizer Rings / Switching Rings Tapered roller bearings Other bearing and fasteners Gearbox housing part Other transmission components shown Scope of delivery: Sale as listed in the pictures. Shipping available on request. Auction-ID: A1-49587-8002
Incl. pneumatic cylinder and gearbox Auction-ID: A1-50529-545
CNC Thread rolling and gear burnishing machine, ESCOFIER P440 CN, CNC Siemens, New 2004 - like new, 2-roll, 2 moving heads, 4000 daN rolling pressure, workpiece diameter: 100mm max., tool diameter: 180-245mm, Swivelling: +/-6°,, forward speed: 0.1-20mm/s, reverse speed: 0.1-30mm/s, motor power: 8.6kW, New: 2004, Condition: like new, under power in our warehouse, Mimu Machine Tools (Italy)
max. wheel diameter:200 mm gear width:250 mm max. module:3 min. module:0,5 total power requirement:45 kW weight of the machine ca.:8,5 t dimensions of the machine ca.:4,4 x 2,4 x 2,7 m Machine out of prototype production Without automation
weight of the machine ca.:8 t dimensions of the machine ca.:2,95 x 1,6 x 2,36 m chucking diameter:250 mm swing diameter:265 mm x-travel:170 mm z-travel:200 mm spindle turning speed range:1.500 U/min spindle bearing diameter:100 mm Pick-up machine
max. wheel diameter:200 mm gear width:250 mm max. module:3 min. module:0,5 total power requirement:45 kW weight of the machine ca.:6,5 t dimensions of the machine ca.:4,4 x 2,4 x 2,7 m Machine out of prototype production Without automation
max. wheel diameter:150 mm gear width: mm max. module:3,5 min. module:1,25 total power requirement: kW weight of the machine ca.:6,5 t dimensions of the machine ca.:2,35 x 2,10 x 2,35 m Width of teeth:45 mm boring diameter:100 mm surface area:1300 x 300 mm
max. wheel diameter:275 mm gear width:55 mm max. module:6,5 min. module:1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, w ...
max. wheel diameter:275 mm gear width:55 mm max. module:6,5 min. module:1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, w ...
max. wheel diameter:50 mm gear width:20 mm max. module:4 mm min. module:0,1 mm total power requirement:12,5 kW weight of the machine ca.:4000 kg dimensions of the machine ca.:2,2 x 2,5 x 2,3 m workpiece length - max.:300 mm
max. wheel diameter:260 mm gear width:320 mm max. module:5 weight of the machine ca.:21 t dimensions of the machine ca.:8,71 x 5,97 x 3,49 m no. of teeth:1...999 max. helix angle:+45/-45 ° pitch min.:0,1 mm pitch max.:1000 mm X-axis:345 mm y-axis:250 mm Z-axis:320 mm b-axis:360 ° c-axis:360 ° Coolant is not available. It was central and there is only a booster pump without filtering. For loading system there is a 2-axes robot with workpiece conveyor.
max. wheel diameter:280 mm max. module:7 weight of the machine ca.:13 t table turning speeds:100 U/min table diameter:250 mm min. number of teeth:4 hob turning speeds:1500 U/min max. hob diameter:160 cutter length max.:230 mm Machine in good condition. Available 01.08.2024
max. wheel diameter:200 mm gear width:60 mm max. module:7 weight of the machine ca.:15 t table diameter:180 mm table turning speeds:100 U/min hob turning speeds:750 U/min Machine in good condition, without feed, without automation Available 24.08.2024
max. wheel diameter:900 mm max. module:10 weight of the machine ca.:8200 kos. hob dia. - max.:190 mm cutter length max.:320 mm milling spindle speeds (infinitely variable):13-80 U/min workpiece length - max.:750 mm max. workpiece diameter:150 mm Counter holder milling mandrel is missing
max. wheel diameter:200 mm gear width:50 mm max. module:6 table diameter:168,14 mm boring diameter:65,532 mm weight of the machine ca.:11 t table turning speeds:0-1.000 U/min length of stroke min./max.:0-70 mm no. of strokes:180-1.800 Stück This machine can be used to make tandler gears. However, for helical gearing, a helical guide is also required.
max. wheel diameter:210 mm total power requirement:60 kW weight of the machine ca.:8 t dimensions of the machine ca.:2,85 x 2,60 x 1,80 m grinding slide feed:700 mm grinding slide feeds:1-15.000 m/min max. workpiece weight:150 kg centre height:260 mm grinding wheel diameter:240 mm
max. wheel diameter:275 mm gear width: mm max. module: weight of the machine ca.:9,4 t dimensions of the machine ca.:3,7 x 3 x 2,82 m min. number of teeth:5 max. number of teeth:2000 range of tooth size:20 mm max. gear width (internal machining):58 mm X-axis:325 mm y-axis:350 mm Z-axis:475 mm Bevel gear milling machine Gleason Pfauter including Promot Automation
maximum number of results exceeded
please refine your search
50 € 
