gear shaving used for sale

Gear motor, electric motor, three-phase motor -Speed: 150 rpm -Power: 0.18 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 33 -Brake -Number: 1x engine available -Price: per piece -Dimensions: 500/215/H180 mm -Weight: 26 kg

Geared motor with brake LENZE DERAXX 071 - 32 ( DERAXX071-32 ) 12.12 622.10.2 0.37 kW 55 rpm 220 / 380 V IP55 shaft diameter: Ø 25 mm Flange diameter: Ø 140 mm used, tested ! Dimensions: 430 x 210 x 170 mm

max. wheel diameter: 160 - 1.600 mm gear width: 250 mm max. module: 20 min. module: 1,5 total power requirement: 1 kW weight of the machine ca.: 3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, three-phase motor -Speed: 57 rpm -Power: 1.1 kW -Construction: B5 -Diameter shaft: 30 mm -Protection class: IP 44 -Brake -Dimensions: 620/260/H260 mm -Weight: 40 kg

Gear motor, electric motor, three-phase motor -Speed: 65 rpm -Power: 0.55 kW -Construction: B5 -Diameter shaft: 30 mm -Protection class: IP 44 -Brake -Dimensions: 565/250/H250 mm -Weight: 33 kg

Gear motor, electric motor -Speed: 42 rpm -Power: 0.55 kW -Construction: B5 angle -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Brake -Number: 1x motors available -Price: per piece -Dimensions: 490/203/H220 mm -Weight: 21 kg

Geared motor with brake and external fan LENZE B 10 R L K 4 - 012 H ( B10RLK4-012H ) GST07 - 2MVBR - 100 - 32 ( GST07-2MVBR-100-32 ) 3,br 0 kW 57 rpm 220 / 380 V IP55 shaft diameter: Ø 40 mm used, tested ! Dimensions: 810 x 260 x 290 mm

max. wheel diameter: 1010 mm gear width: 0 mm max. module: min. module: total power requirement: 15 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: m Max. depth of tooth 10 mm Max. workpiece Ø (for clearance) 1,010 mm Max. external Ø of coupling 610 mm Sliding base withdraw 216 mm Max. distance from grinding wheel to workpiece nose 90 - 430 mm Max. weight of workpiece, including clamp 500 kg No. of teeth 32 to 150 Grinding wheel Ø, approx 152 - 320 mm Grinding wheel speeds, infinitely variable 0 - 3,600 rpm Work spindle bore 60 mm Total electrical load, approx. 15 kW - 380 V - 50 Hz Weight, approx. 9,500 kg Accessories / Special Features Automatic roughing and finishing process via pre-settable counter and built-in feed cam. Counter for number of teeth. Counter for number of dressing cycles. 2 built-on dressing units with three dressing diamonds for radiu ...

Gear motor, electric motor, electric gear motor -Speed: 164 rpm -Power: 1.5 kW -Construction: B3 angle -Diameter shaft: 25 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 480/190/H230 mm -Weight: 33 kg

Gear Motor with Brake BAUER G73-10/D1A4-283 3 kW 11 rpm 400 V IP65 shaft diameter: Ø 70 mm brake: GBZ 250 WS-HL 380 - 400 V AC / 180 V DC brake mounted !' used, tested !' Dimensions: 1070 x 470 x 430 mm

max. wheel diameter: 400 mm gear width: 280 mm max. module: 1 min. module: 4 total power requirement: 15 kW weight of the machine ca.: 6000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, three-phase motor -Speed: 62 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 54 -Dimensions: 454/200/H155 mm -Weight: 19 kg

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.18 kW -Speed range: 81-485 rpm -Motor: adjustable -Drive shaft: Ø 14 mm -Construction: B3 -Number: 1 piece of motors available -Price: per piece -Dimensions: 365/200/H190 mm -Weight: 19 kg

Gear motor, electric motor, electric gear motor -Speed: 11.2/22.6 rpm -Power: 0.37/0.55 kW -Shaft diameter: Ø 30 mm -Construction: B5 angle -Protection class: IP 54 -Dimensions: 490/230/H240 mm -Weight: 33 kg

Gear Motor GROSCHOPP Type: DME 90-60 ( DME90-60 ) D 3 a 0,0,0,0 075 kW 0.54 rpm 400 V IP54 shaft diameter: Ø 12 mm used, tested ! Dimensions: 300 x 185 x 150 mm

max. wheel diameter: 400 mm gear width: 75 mm max. module: 0,5 min. module: 6 total power requirement: 25 kW weight of the machine ca.: 7000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 120 mm gear width: 160 mm max. module: 3 min. module: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Two Flank Gear Tester The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Geared motor with inverter and forced ventilation LENZE GKS04-3EHAR-063C12 MDEMA1M063-12 0,0,0,000 12 kW 8.7 rpm (at 1425 rpm) i= 163,322 230 / 400 V IP55 shaft diameter: Ø 30 mm with controller (MOTEC 8200) but input device required! New !' Dimensions: 610 x 330 x 190 mm

max. wheel diameter: 0 mm gear width: 150 mm max. module: 2,5 min. module: total power requirement: 10 kW weight of the machine ca.: 2400 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Geared motor, electric motor, electric geared motor -Speed: 49 rpm -Power: 0.25 kW -Design: B5 -Shaft diameter: 16 mm -Protection class: IP 54 -Dimensions: 330/190/H140 mm -Weight: 11.6 kg

geared motor, electric motor -Speed: 26/80 rpm -Power: 0.18/0.55 kW -Design: B5 -Shaft diameter: Ø 30 mm -Protection class: IP 54 -Brake -Dimensions: 525/200/H200 mm -Weight: 28 kg

Geared motor, electric motor, three-phase motor, right-angle gear motor -Speed: 32 rpm -Power: 0.6 kW -Design: B3 -Shaft diameter: Ø 38 mm -Protection class: IP 44 -Dimensions: 500/250/H280 mm -Weight: 41 kg

Gear Motor with Inverter LENZE GKR03-2EHAR-063C02 MDSMA0M063-02 0,0,0,0 06 kW 50 rpm (at 1425 rpm) i= 28,808 230 V 1Ph IP55 shaft diameter: Ø 20 mm with control (MOTEC 8200) but input device required! New !' Dimensions: 360 x 240 x 165 mm

max. wheel diameter: 2500 mm gear width: 0 mm max. module: 34 min. module: 1 total power requirement: ca. 15 kW weight of the machine ca.: 15 t dimensions of the machine ca.: 4,20 x 2,00 x 2,90 m Extra große ZR-Prüfmaschine, Gegenhalter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor -Speed: 3.55 rpm -Power: 0.25 kW -Construction: B5 -Diameter shaft: Ø 40 mm -Protection class: IP 54/55 -Brake -Number: 2x motors available -Price: per piece -Dimensions: 600/250/H280 mm -Weight: 43 kg

Gear motor, electric motor, electric gear motor -Speed: 179 rpm -Power: 9 kW -Design: B3 -Shaft diameter: 55 mm -Protection class: IP 44 -Quantity: 1 piece available -Price: per piece -Dimensions: 1000/310/H365 mm -Weight: 181 kg

Gear motor, electric motor -Speed: 48 rpm -Power: 1.5 kW -Construction: B5 -Diameter shaft: Ø 45 mm -Protection class: IP 54 -Brake -Dimensions: 650/260/H280 mm -Weight: 56 kg

Gear Motor DARKER MOTORS GR 63x55 ( GR63x55 ) Gearbox 88851 01760 165 rpm i: 20,25 : 1 24 V shaft: Ø 12 mm flange: Ø 52 mm used, tested ! Dimensions: 220 x 65 x 65 mm

workpiece diameter: 250 mm centre distance: 0 mm honing length max.: mm max. module: 5 Gear Ø, min./max. 10 / 250 mm Module range 1 - 5 Length of teeth / max. table stroke 500 mm Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Honing head swivelling +/- 35 ° Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Weight 3,200 kg Accessories / Special Features Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. All roughing and finishing infeeds can be adjusted by a decade switch ...

Gear motor, electric motor, three-phase motor -Speed: 61.3 rpm -Power: 0.75 kW -Construction: B3 angle -Diameter shaft: 28 mm -Protection class: IP 54 -Dimensions: 200/200/H425 mm -Weight: 26 kg

Gear motor, electric motor, electric gear motor -Speed: 7.5 rpm -Power: 0.55 kW -Construction: B5 -Diameter shaft: 50 mm -Protection class: IP 55 -Brake: 24 V -Dimensions: 820/320/320 mm -Weight: 100 kg

Gear motor variable / adjustable BRUMO GRG1U100B 0.37 kW 29 - 159 rpm 220 / 380 V shaft diameter: Ø 20 mm used, tested ! Dimensions: 500 x 370 x 210 mm

max. wheel diameter: 330 mm gear width: 180 mm max. module: 7 min. module: 0,5 total power requirement: 12 kW weight of the machine ca.: 7500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 215 mm gear width: 40,65 mm max. module: total power requirement: 20 kW weight of the machine ca.: 10 t Max. external Ø of workpiece 215 mm Tooth profile, height x width 16 x 40.65 mm No. of teeth 5 - 200 Max. tooth ratio 1 : 10 Grinding wheel Ø 51 - 190 mm Grinding wheel speeds 1,000 - 6,000 rpm X Axis (horizontal) 152 mm Y Axis (vertical) 178 mm Z Axis (slide base plate) 304 mm Distance from middle of machine to middle of workspindle 115 mm Axial speed 125 mm/sec Workpiece speeds 0 - 30 rpm Workspindle bore, conical 3 29/32 inch Total electrical load 20 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters. Extensive coolant equipment with filter system, band filter, etc. Driv ...

Gear Motor SEW SA42LP71 D63L4B03/HR/TF ( SA42LP71D63L4B03/HR/TF ) 0,0,0 25 kW 34 rpm i=37,94 220/ 380 V IP54 B35, with foot and flange shaft diameter: Ø 30 mm New !' Dimensions: 510 x 180 x 180 mm

max. wheel diameter: 150 mm gear width: 300 mm max. module: 4,5 min. module: total power requirement: 20 kW weight of the machine ca.: 6 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter: 240 mm centre distance: 0 mm honing length max.: 500 mm max. module: 5 total power requirement: 12 kW weight of the machine ca.: 5000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, angular gear motor, electric motor Electric gear motor -Angular gear motor -Motor power: 0.55 kW -Speed: 104 rpm -Shaft diameter: 20 mm -Construction: B5 angle -Brake -Number: 2x motors available -Price: per piece -Dimensions: 485/240/H160 mm -Weight: 20 kg

Gear motor, electric motor, electric gear motor -Speed: 45/90 rpm -Power: 0.16/0.3 kW -Diameter shaft: Ø 20 mm -Construction: B3 -IP protection -Dimensions: 360/160/H175 mm -Weight: 14 kg

Gear motor, electric motor -Speed: 76 rpm -Power: 1.1 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 55 -Number: 2x motors available -Price: per piece -Dimensions: 425/220/H210 mm -Weight: 26 kg

Gear Motor with Brake ABM Type: ZFB 12SO / G80 F4D 808-4 ( ZFB12SO / G80F4D808-4 ) 0,0,0,0 75 kW 430 rpm 230 / 400 volts 5 -100 Hz IP 54 / 55 flange Ø 140 mm used, tested ! Dimensions: 470 x 150 x 200 mm

max. wheel diameter: 900 mm gear width: 500 mm max. module: 1 min. module: 10 total power requirement: 16 kW weight of the machine ca.: 8.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, electric gear motor -Speed: 200 rpm -Power: 0.055 kW -Construction: B5 angle -Diameter shaft: 14 mm -Protection class: IP 44 -Dimensions: 290/150/H135 mm -Weight: 5.3 kg

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.25 kW -Speed range: 358-1850 rpm -Motor: adjustable -Shaft: Ø 11 mm -Construction: B5 -Number: 1 motors available -Dimensions: 300/180/H190 mm -Weight: 9.8 kg

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.25 kW -Speed range: 465-2325 rpm -Motor: adjustable -Design: B5 angle -Drive shaft: Ø 25 mm -Protection class: IP 44 -Dimensions: 545/210/H180 mm -Weight: 22 kg

Geared Motor GETRIEBEBAU NORD Type: SK 01F-71 L/4 ( SK01F-71L/4 ) 0.37 kW 70 rpm 230 / 400 Volt IP 55 Flange Ø 210 mm used, tested ! Dimensions: 400 x 170 x 210 mm

max. wheel diameter: 265 mm gear width: 45 mm max. module: 4 min. module: 0,3 max. workpiece diameter: 300 mm stroke length max.: 0-50 mm stroke position adjustment: 25 mm distance work spindle /surface of the table: 170/245 mm spindle taper: innen MK 4 table-size: 180 mm table hole: 95/75 mm strokes per minute: 450 - 840 total power requirement: 10 kW weight of the machine ca.: 5200 kg dimensions of the machine ca.: m : : : : : : : Max. gear Æ (external) approx. 265 mm Max. workpiece Æ for internal gears 300 mm Max. gear width 45 mm Module range 0.3 - 4 Length of stroke 0 - 50 mm Adjustment of length of stroke 25 mm Distance between table and spindle, min./max. 170/245 mm Spindle taper (external 90 / internal 50) MT 4 Table size 180 mm Table bore 95 / 75 m ...

Gear motor, electric motor, electric gear motor -Speed: 4.0 rpm -Power: 0.55 kW -Diameter shaft: Ø 38 mm -Construction: B5 -Protection class: IP 55 -Dimensions: 755/240/H240 mm -Weight: 44 kg

Gear motor, electric motor -Speed: 23 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter hollow shaft: Ø 25 mm -Protection class: IP 54 -Brake -Dimensions: 500/150/H280 mm -Weight: 20 kg

Geared motor GROSCHOPP Type: WK 1441 - 1 ( WK1441-1 ) DM 80-40 0,0,0,0 022 kW 24 rpm 230 / 400 V shaft diameter: Ø 12 mm flange diameter: Ø 110 mm aluminium housing used, tested ! Dimensions: 230 x 170 x 130 mm