129,383 used machines on RESALE, but how to find them? Machine Search
max. wheel diameter:300 mm gear width:110 mm max. module:6 weight of the machine ca.:10,5 t
Infeed and outfeed chain conveyor, with tool holders, chip conveyor, hydraulic unit and air conditioning.
max. wheel diameter:200 mm gear width:50 mm max. module:6 table diameter:168,14 mm boring diameter:65,532 mm weight of the machine ca.:11 t table turning speeds:0-1.000 U/min length of stroke min./max.:0-70 mm no. of strokes:180-1.800 Stück
The analyzer measures the deviations and displays them via a recorder. The EVTM device is used to measure gear parameters such as profile, flank line or pitch deviation. • It is mechanically applied to the gear wheel, and deviations are registered via electric displacement transducers (buttons). • The measurement results can then be evaluated or recorded via the first device (the recorder/analyzer). The EVRM is used in conjunction with the other two devices to process vibrations (acceleration/speed/displacement) and output them as an analog signal. It is used for: • Vibration diagnosis on machines (bearings, imbalance, alignment) • Resonance measurements for workpieces / test benches • As an interface between sensor (accelerometer) and meter/recorder/oscilloscope It is sold unchecked from a company closure Auction-ID: A7-45427-1
The analyzer measures the deviations and displays them via a recorder. The EVTM device is used to measure gear parameters such as profile, flank line or pitch deviation. • It is mechanically applied to the gear wheel, and deviations are registered via electric displacement transducers (buttons). • The measurement results can then be evaluated or recorded via the first device (the recorder/analyzer). The EVRM is used in conjunction with the other two devices to process vibrations (acceleration/speed/displacement) and output them as an analog signal. It is used for: • Vibration diagnosis on machines (bearings, imbalance, alignment) • Resonance measurements for workpieces / test benches • As an interface between sensor (accelerometer) and meter/recorder/oscilloscope It is sold unchecked from a company closure
vert. Internal broaching machine maximum tractive force: 10T Max stroke: 1000 mm Max cutting speed: 10.9 m / min Max reverse speed: 27.5 m / min Clamping surface: 400 x 400 mm Room set: 3 piece
T-Shape 3 in1 Multisystem // Year of manufacture 2020 T-Shape combines 3 powerful technologies that work simultaneously to promote the production of collagen and significantly reduce the local volume of fat and elasticity of the skin. It provides a deep and immediate increase in blood circulation and lymphatic drainage, which in turn improves physical fitness - Tightening of the skin - Reduction of cellulite - Reduction of fat deposits - Reduction of scope - Treatment after liposuction - Face lift and skin tightening RF (Radio Frequency) T-Shape generates a bipolar, quadripolar and hexapolar radio frequency signal. Heat is generated by the contact of the RF (radio frequency) energy with the tissue impedance. With proper heating, the collagen-rich dermis is immediately denatured, the fibrils contract and thicken. In response to the initial heat, new collagen is produced, an ...
Corner circular shaping machine Foellmer M; good condition; cleaned and tested; knives for straight corner section; .max. Insert height 65mm; Corner section max.70mm; Foot switch. Corner cutter Foellmer M; good condition; cleaned and checked; knife for straight cut; max.pile hight 65mm; corner cut max.70mm; Foot switch.
NEW BUTTER EXTRUDERS AND SHAPING MACHINES BUILT BY New Butter Extruder and Shaping Machines By Butter Extruder and Shaping Machine Butter Extruder Semi - Automatic Butter Extruder, Shaping and Cutting Machine fited on full stainless steel frame, Control panel. Two Stainless steel screw augers, stainless steel hopper. Cutting wires on outfeed conveyor making the machine user friendly . Extruding, Shaping and Cutting Machine Emergency Stop Button. Condition :New Mould Samples TECAFORM AH Blue Our New Special Designed Extruding Outlets TECAFORM AH Blue meets all applicable requirements for declaration of Food Contact. European regiulation EC 10/2011 and Ammednments European Regulation EC 1935/2004 Council Regulation EC 2023/2006 (GMP) FDA §21 CFR 177.2470 We use High Quality Parts Uses High Quality parts on the new range of DMUK EXSH 1 by Adding Certified Reducers, Stainless Steel Parts an ...
A Welter slotting machine for gear and profile machining is available. Stroke: 1250mm, machine dimensions X/Y: 3800mm/5600mm, weight: approx. 12500kg, control: Siemens. The machine was retrofitted in 2011. Documentation available. On-site inspection is possible.
A Hahndorf keyway slotting and broaching machine is available. Stroke range slotting: 60mm-300mm, max. slot width slotting: 34mm, max. slotting length: 300mm, max. slot width broaching: 14mm, max. broaching tool length: 640mm, max. cutting speed forward/return: 3m/3m/min, weight: approx. 300kg. Documentation available. On-site inspection is possible.
This 4-axis Lorenz LS 420 was manufactured in 2008. It features a NUM control system, capable of handling external and internal splines, single points, and segment splines. It can manage spline jointing up to B = 25 mm and spline hub profiles. The stroke length is 140 mm. Consider the opportunity to buy this Lorenz LS 420. Contact us for more information.
Behr ST 150 Vertical Shaping Machine -Masch.-Nr: 096, -large stroke: 150 / 175 mm -Tilt adjustment of the ram in both directions: 5 / 8 degrees -Height table / UK ram guide: 260 mm -Rotary table diameter: 340 mm -Longitudinal displacement of the table: 320 mm -3 lifting speeds: 17 / 54 / 108 H/min. -Gr. groove width: 16 / 26 mm -External dimensions approx.: 960 x 1530 x 2030 mm with - Feeds in X and Y (back and forth) -Speed adjustable - Adjustment of rotary table manually
Bevel helical gearboxes Manufacturer : Bonfiglioli Model : A 504 UH50 P90 LOE engine: Euromotori 1,1kw MS9016Year of construction 2008 NEW, unused from old stock for more information see pictures.
RECON Part number: 1230 2144 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
Unused gearboxes, angular gearboxes, partly without electric motors, partly with electric motors. Manufacturers e.g. PWH Plants + Systems GmbH These types and others pre-raetig: 1. PWH 90KW Type K2SZG250 n1=1500 rpm n2= 75 rpm i=20 P=90 KW Length over everything: 120cm Width over all approx. 55cm Height approx. 56cm Diameter of shaft rear (lies laengs) 45mm Transducer of the shaft front (lies transverse) outside 160mm Transducer of the shaft front (lies transversely) inside 140mm Weight-cooked 1,000kg 2. PWH 45KW Type KSZG200 n1=1470 rpm n2= 73.5 rpm i=20 P=45 KW All over: 94cm Pq7hwm Width over all approx. 45cm Height approx. 46cm Diameter of shaft rear (lies laengs) 50mm Transducer of the shaft front (lies transverse) outside 150mm Transducer of the shaft front (lies transverse) inside 120mm, passage 100mm Weight-cooked 600kg 3. PWH 37KW Type KSZG180 ...
gear motor, electric motor, servo gear motor -Manufacturer: SEW-Eurodrive, servo gear motor type RF27 CMP63M/KY/AKOH/SM1 -Gearbox:Type RF27 455 rpm i 6.59 -Motor: Type CMP63M/KY/AKOH/SM1 -Power: 3.30 Nm -Speed: 0 - 3000 rpm -Shaft: Ø 25 x 50 mm -Dimensions: 465/140/H170 mm -Weight: 10.5 kg
Gearmotor SEW R82DV132S-4 - used - MANUFACTURER´S DATA SEW R82DV132S-4 output: 5,5 kW motor speed: 1430/73U/min tension: 400/690Δ/Y shaft: 50mm CONDITION+HISTORY • operational standby-motor out of a company breakdown • shaft rotates, no further operation tests • condition see photos INSPECTION Motor can be inspected at any time. TERM´S OF DELIVERY Ex works DE - 83395 Freilassing, free on truck. COLLECTION By agreement Please feel free to contact us for any further questions! Project Organisation Alexander Torlach GmbH Breslauer Str. 41a 83395 Freilassing phone: +49(0)8654-77669-0 fax: +49(0)8654-77669-15 info@torlach.com
Gearmotor Bauer D1A41AHZ/253 - used - MANUFACTURER´S DATA Bauer D1A41AHZ/253 motor speed: 1420/114U/min tension: 380/Y protection class: IP54 shaft: 30mm CONDITION+HISTORY • operational standby-motor out of a company breakdown • shaft rotates, no further operation tests • condition see photos INSPECTION Motor can be inspected at any time. TERM´S OF DELIVERY Ex works DE - 83395 Freilassing, free on truck. COLLECTION By agreement Please feel free to contact us for any further questions! Project Organisation Alexander Torlach GmbH Breslauer Str. 41a 83395 Freilassing phone: +49(0)8654-77669-0 fax: +49(0)8654-77669-15 info@torlach.com
Spur gear with drive motor 30 kW (e.g. suitable for a ball mill), shaft diameter 45 mm, N1 = 1,450 UPM, N2 = 14.5 UPM, drive shaft diameter 130 mm, with electric brake, coupling with counter window 600 mm diameter. Oil 190 CSX/50C - Wa-No. 369226. Complete on foundation frame.
Gearmotor Bauer DK940 AH/241 - used - MANUFACTURER´S DATA Bauer DK940 AH/241 output: 2,0 PS Motor speed: 1400/121U/min tension: 380Δ/Y protection class: IP65 shaft: 25mm CONDITION+HISTORY • operational standby-motor out of a company breakdown • shaft rotates, no further operation tests • condition see photos INSPECTION Motor can be inspected at any time. TERM´S OF DELIVERY Ex works DE - 83395 Freilassing, free on truck. COLLECTION By agreement Please feel free to contact us for any further questions! Project Organisation Alexander Torlach GmbH Breslauer Str. 41a 83395 Freilassing phone: +49(0)8654-77669-0 fax: +49(0)8654-77669-15 info@torlach
used
Type: NUP 60 Machine number.: 218338 Com.: 205639 Year of construction: 1990 with screw feeder and paddle mixers Stöber gear Type R76-1027-750-4 No.: 874256 Rpm: 136-680 RPM Drive motor: DIETZ No.: 3807028 403195 B5/300 Power: 7,5 kW Paddle mixer power: 1,5 kW Mixing trough attachment approximately 150 l stainless steel Dimensions: LWH = 2400x630x1150mm with switchgear Weight: 600 kg
used
used
used
Mixing hopper with 2 paddle mixers Feed screw down Pump speed control Type: NM045SP02512B Com.: 35300131 MaschNr.: 289249 Year of construction: 1997 Condition very good Pump motor Flender in ex e II Performance: 3.6 kW, 1440 min-1 Transmission Lenze speed controlled 1 Paddle mixer: speed controlled N1-n2 = 28-143 min-1 Browse gear : KW 1.35 in Exx 2. Paddle mixer: 120 min-1, 1.35 kW in Exx Dimensions: LWH = 2800x500x700mm Weight: 600 kg Mixing and pumping of viscous products with solids
Manufacturer: Allweiler Type: SEBP 200.1 E11 P01 No.: 7610156/2 Year of construction: 1998 N1-n2 = 50-155 min-1 Q = 10-60 l / min, 600-3600 l / h Drive North, speed control Motor North Power: 2kW in EEx e II Stator with traces of use Dimensions: LWH = 1400 x 200 x 600 mm Per Dukein outlet: Flange DN 80 Weight: approx. 80 kg
Eria Pompe Pacco Type: One 80-2/AA.T34 No.: 5930 Transmission: Spaggiari Transmissioni Type: RM 100/1 No.: 101730/99 Macdonald: Ercole Marelli Power: 9.2 kW Condition very good Dimensions: LWH = 2200 x 400 x 570 mm
Make: Allweiler Type: SEBP 200.1 E11 P01 No.: 7610156/1 Year of construction: 1998 N1-n2 = 50-155 min-1 Q = 10-60 l / min, 600-3600 l / h Stöber gear, to regulate speed Type: R47-2092-200-4 Engine Siemens in EEx e II Power: 2 kW Damaged stator Dimensions: LWH = 1450 x 400 x 430 mm Weight: approx. 80 kg Productsas variable in-let Out: DN 80 flange
Solid stainless steel case Transmission: Motovario speed controlled 190/1000 min-1 Type: TKR/100 Engine: Ercole Marelli Power: 7.5 kW, approx. 5 t / h 380 V good condition Dimensions: LWH = 2000 x 400 x 550 mm Weight: approx. 4100 kg
Ex Center screw pump stainless steel Manufacturer: CSF inox Stator: Diameter 120 mm Statorlänge: 240 mm Transmission: Motovario No.: 88232123 Type: MKM/4 / 50 40-210 min-1 Engine: ABB motors LKeistung: 4 kW 1000 kg / h Dimensions: LWH = 1800 x 400 x 500 mm Weight: 300 kg good condition
Producer: Handtmann Type: 34-4 Calibration gear HANDTMANN 34-4 for Filling machines Handtmann VF 50, 80, 100, 200, 300 and all from the VF 600 series Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36
Ex Center screw pump stainless steel Manufacturer: CSF inox Statordurchmesser: 140 mm Statorlänge: 290 mm Transmission: Motovario (Italy) No.: 8816900 Type: TK 100 190-1000 min-1 Engine: Ercole Marelli (Italy) 380 V, 50 Hz, 7.5 kW Dimensions: LWH = 2300 x 460 x 600 mm Weight: approx. 400 kg Condition very good
Bevel-helical gear units Manufacturer: Bonfiglioli Model: A-50 4 UH50 P90 LO E engine: Euromotori 1 .1kw MS9016 Built in 2008 NEW, unused from old stock for further details please refer to the pictures.
Ex Center screw pump in stainless steel Manufacturer: CSF inox Transmission: Motovario (speed controlled) Type: TK 100 Engine: Leroy Somer 380 V, 50 Hz, power: 9kW n = 144 min-1 Stator diameter: 160 mm Stator length: 390 mm good condition Dimensions: LWH = 2600 x 450 x 600 mm Weight: approx. 500 kg
Bevel-helical gear units Manufacturer: Bonfiglioli Model: A 413 UH45 P80 LO E engine: Euromotori 0, 55kw MS8026 Built in 2008 NEW, unused from old stock for further details please refer to the pictures.
Ex Center screw pump stainless steel Manufacturer: CSF inox Transmission: Motovario Type: TK 100 N1-n2 = 190-1000 min-1 Motor: ASEA Power: 9 kW 380 V Stator diameter: 140 mm Stator length: 600 mm good condition Dimensions: LWH = 2500 x 460 x 660mm Weight: approx. 400 kg
Angle gearboxes / gearboxes NOSEN type. RN-4 M-I-LR-1:1 T shape / 1 shaft input - 2 wave outputs -Shaft diameter 19 mm -The ratio of i = 1:1 -Speed max 1500 rpm -Weight 10 kg -Max. Of torque at 1500 rpm: 31.9 NM used from inventory.
maximum number of results exceeded
please refine your search
1.000 € 
