gear pump used for sale

Vernier caliper, vernier caliper, vernier caliper -Manufacturer: CSE, tooth width caliper sprocket caliper with fine adjustment -Measurement scale: 0-40 / 0-60 mm -Vernier: on both sides -Dimensions case: 175/155/H30 mm -Weight.: 0.5 kg

Scrubber dryer, floor cleaning machine, mopping machine, gearbox -Manufacturer: Gansow, drive axle with gear motor from scrubber drier 70 BF 70 -Motor: Gansow type 11500 1000 W 24 V -Transmission: Flender ZF 12 -Dimensions: 660/260/H150 mm -Weight: 43 kg

Adjustable gearbox, variable speed gearbox, spindle gearbox, DISCO variable speed gearbox -Manufacturer: Lenze, DISCO adjustable gearbox -Type: 11 511 03 00 0 -Speed range: 1000-167 rpm for motors up to 0.37 kW / 1380 rpm -Dimensions: 228/163/H185 mm -Weight: 13 kg

Listing ID: 22624 Brand: ZF 350 Model: 350 Power: 324 kW(435hp) 1800 rpm (CD) Ratio: 2,077:1 SN 20030818 Features: SAE Housing, Controls Mechanical ,Hydraulics ,Oil Filter HS Code: 84836080

LISTING ID 22583 BRAND: REINTJES MODEL: WAF 742 RATIO: 3,55:1 POWER: 924.6 kW 1240 HP 1800 rpm SN 62345 FEATURES: Flex. Coupling 21 inch, Controls, Left in, Right out, Brackets

Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: Motovario, gear motor type NHRV -Speeds: approx. 100 rpm -Manufacturer motor: DRdrives type 63A-2 -Power: 0.18 kW / 2720 rpm -Hollow shaft: Ø 14 x 60 mm -Dimensions: 288/155/H125 mm -Weight: 5.3 kg

LISTING ID 22583 BRAND: REINTJES MODEL: WAF 742 RATIO: 3,55:1 POWER: 924.6 kW 1240 HP 1800 rpm SN 62345 FEATURES: Flex. Coupling 21 inch, Controls, Left in, Right out, Brackets

DC Motor, Servo Motor, Gear Motor, Electric Motor, DC Gear Motor -Manufacturer gearbox: SITI type MI 30 SI/D6 10/1 -Translation: 1:10 -Motor: Siboni type MT 10-3 36 V/ 58 W/ 2700 rpm -Hollow shaft: Ø 14 x 55 mm -Dimensions: 220/65/105 mm -Weight: 2.5 kg

Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: Nord, geared motor with brake -Type: SK 530SU-80S/4BRE8 -Speed: 93 rpm -Power: 0.55 kW / 1380 rpm -Shaft: Ø 25 x 45 mm -Protection class: IP54 -Brake: 8 Nm -Dimensions: 435/200/H240 mm -Weight: 21 kg

BRAND: ZF MODEL: ZF 2555 RATIO: 2,333:1 POWER: 706 kW(960 hp) 1800 rpm Features: SAE-Housing: SAE-0, Flexible Coupling with Aluminum ring,Controls, Oil Cooler, Brackets, PTO Oil Cooler and Filters Aluminum Ring SN 50010644 HS Code: 84836080 NET WEIGHT 640 kg DIMENSIONS (cm) 90 x 120 x 90

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, gear motor type SA37 DR63M4/TF/IS -Speed: 13 rpm -Power: 0.18 kW -Hollow shaft: Ø 20 x 100 mm -Protection class: IP55 -Dimensions: 340/180/H140 mm -Weight: 11 kg

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, gear motor type WA 30 DT71D4/IS -Speed: 29 rpm -Power: 0.37kw -Hollow shaft: Ø 20 x 100 mm -Protection class: IP54 -Number: 1x motor available -Dimensions: 340/145/H230 mm -Weight: 10.7 kg

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, gear motor type W20 DR63M4/TF/IS -Speed: 28 rpm -Power: 0.18kW -Shaft: Ø 20 x 40 mm -Protection class: IP55 -Dimensions: 300/180/H120 mm -Weight: 7.6 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: STM, geared motor type RMI 50 D -Speed speeds: approx. 14 rpm i= 1/100 -Manufacturer engine: TeKell type M63B4 -Power: 0.187 kW / 1390 rpm -Shaft: Ø 24 x 90 mm -Dimensions: 210/215/H345 mm -Weight: 10 kg

Drive gear for hot forging press K8548 6300T Weight, kg 15 700

Driven gear for hot forging press 6300T Weight, kg 1300

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type: RF43 DT90S4/TH i=19.15 -Speed: 73 rpm -Power: 1.1 kW -Design: B5 -Shaft: Ø 25 x 50 mm -Protection class: IP 54 -Dimensions: 500/200/H110 mm -Weight: 25 kg

Gear motor, electric motor, electric gear motor -Manufacturer: VEM, geared motor with brake -Type: ZG2 BMREB 80 K 4 -Speed: 80 rpm -Power: 1.1 kW -Design: B5 -Shaft: Ø 32 x 80 mm -Protection rating: IP 44 -Brake: 7.0 Nm -Dimension: 540/200/H260 mm -Weight: 33 kg

Generating Grinding Machine Grinding Machine Gleason Pfauter G320 CNC + Promot Automation Hersteller [manufacturer]: Gleason Pfauter G320 + with Promot Automation handling unit Type [ type]: G 320 Control unit: Siemens 840 Incl. control panel Baujahr[construction year]: 10/2001 Module [ ]: 0.5-7.0 Min. workpiece diameter [ ]: 10 mm Max. workpiece diameter [ ]: 380 mm Number of teeth [ ]: 10-600 Vertical carriage stroke "Z" [ ]: 200mm Horizontal carriage stroke "X" [ ]: 230mm Tangential carriage stroke (SHIFTING) "Y" [ ]: 135mm Swivel angle clamping head "A" [ ]: +-45° Tailstock tip stroke [ ]: 125mm tangential slide stroke – dressing [ ]: "V" 180mm radial carriage stroke – dressing [ ]: "U" 110mm Rotation speed – grinding wheel in progress [ ]: 3000rpm max - infinitely variable Egg speed - linear axes [ ]: 10000 mm/min Max. table rotation speed [ ]: 240 RP ...

Gear motor, electric motor, electric gear motor -Manufacturer: VEM, geared motor type Z2 KRA 80.2/6 -Speed: 20 rpm -Power: 0.25 kW -Design: B3 -Shaft: Ø 28 x 60 mm -Protection rating: IP 44 -Dimension: 415/190/H250 mm -Weight: 23 kg

Gear motor, electric motor, electric gear motor -Manufacturer: VEM, geared motor type Z2 KR 80.1/8 -Speed: 16 rpm -Power: 0.15 kW -Design: B3 -Shaft: Ø 28 x 60 mm -Protection rating: IP 44 -Dimension: 415/190/H250 mm -Weight: 22 kg

Gears, spur gears, angular gears, worm gears -Manufacturer: Chiaravalli, worm gear type CHM 75 B14 unused in original packaging -Translation: i = 15 -Hollow shaft: Ø 28 x 120/60mm -Dimensions of cardboard: 200/160/H240 mm -Weigh: 8.5 kg

1996 sinumerik 840C video available

model is 5B 150P - table diameter is 800mm - max stroke is 160mm - control is Omron NS12 - logic equipment and sensors: Omron CS1 series CPU control cards Electric drawings and safety and instructions for use are updated at 2004 same as the modernisation

Gears, spur gears, angular gears, worm gears -Manufacturer: Chiaravalli, worm gear type CH-04P NT unused -Translation: i = 10 -Hollow shaft: Ø 14 x 33 mm / 18 x 65 mm -Hole circle: Ø 87 x 9 mm -Dimension: 120/1285/H125 mm -Weight: 2.0 kg

Gears, spur gears, angular gears, worm gears -Gear: Worm gear, unfortunately unused without type designation -Translation: i = 40 -Hollow shaft: Ø 11 x 23 mm / 14 x 67 mm -Hole circle: Ø 87 x 9 mm -Quantity: 3x gears available -Price per piece -Dimension: 100/100/H115 mm -Weight: 1.2 kg

Gear motor, electric motor, electric gear motor -Manufacturer: ABM Baumüller, geared motor type HSG5DFR/44D8556A-4 -Speed: 24.5 rpm -Power: 0.09 kW 1350 rpm -Design: B5 -Shaft: Ø 10 x 20 mm -Protection rating: IP55 -Dimensions: 245/130/H145 mm -Weight: 4.2 kg

Geared motor, electric motor, electric geared motor, angular geared motor, automatic band saw -Manufacturer: Flender Himmel, geared motor -Gearbox: Type ZF 10 i= 18.064 -Speed: 78 rpm -Engine: ERY 0.18/4-7 1390 rpm -Shaft: Ø 20 x 50 mm -Dimensions: 380/200/H210 mm -Weight: 11.5 kg

Immediately available used idler gear

Immediately available used intermediate gear

Immediately available used gear camshaft

Gear, gears, spur gear, spur gear -Manufacturer: PTI, gear, spur gear module 5 18 teeth -Type: M5 Z18 -Shaft holder: I pilot hole Ø 20 mm -Tooth width: 50 mm -Quantity: 2x gear available -Price per piece -Total dimensions: Ø 100 x 75 mm -Weight: 3.0 kg/pc.

Gear motor, electric motor, electric gear motor, spur gear motor, gear motor with brake -Manufacturer: SEW-Eurodrive, geared motor type RF17 DT71D4 -Speed: 55 rpm / i= 25.23:1 -Power: 0.37 kW -Shaft: Ø 20 x 40 mm -Protection rating: IP54 -Dimensions: 380/200/H160 mm -Weight: 9,9 kg

Gear motor, electric motor, electric gear motor, spur gear motor, gear motor with brake -Manufacturer: Lenze, geared motor type GST04-2M VCK 071C32 -Speed: 44.6 rpm / Torque: 77 Nm -Power: 0.37 kW -Shaft: Ø 20 x 40 mm -Protection rating: IP55 -Dimensions: 395/200/H160 mm -Weight: 11.7 kg

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type: SA77 DAS90S4/TF/IS -Speed: 1450/6.4 rpm i= 225.26 -Power: 0.55 kW -Hollow shaft: Ø 50 x 190 mm -Dimensions: 550/280/H300 mm -Weight: 69 kg

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type: KA37 DAS80N4/TF/IS -Speed: 1400/91 rpm i= 35.57 -Power: 0.37 kW -Hollow shaft: Ø 30 x 120 mm -Protection rating: IP66 -Dimensions: 490/120/H210 mm -Weight: 22 kg

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type: KA37 DRN80M4/RS/TF/AL -Speed: 1435/24 rpm i= 58.60 -Power: 0.55 kW -Hollow shaft: Ø 30 x 120 mm -Protection rating: IP55 -Dimensions: 480/210/H170 mm -Weight: 22 kg

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type: KA37 DAS100M4/TF/IS -Speed: 1445/41 rpm i= 35.57 -Power: 1.1 kW -Hollow shaft: Ø 30 x 120 mm -Protection rating: IP66 -Dimensions: 600/162/H255 mm -Weight: 43 kg

Gears, angular gears, spur gears, transmission gears, worm gears -Manufacturer: Vogel, angular gear type K 1 -Id. No: 200066 -Translation: i = 1.0 -Shaft: Ø 18 x 35 mm -Dimensions: 168/168/H90 mm -Weight: 5.2kg

Globoidal cam gears, indexing, oscillator indexer, index gear -Manufacturer: Manifold, Transmission Clutch Indexing -Type: V-1-C 5 120 -Shaft: Ø 48 x 145 mm -Indexing angle: 120° -Number of stops: 5 -Dimensions: 400/385/H395 mm -Weight: 151kg

Gear motor, electric motor, electric gear motor -Manufacturer: Müller & Georg, geared motor type ZGO G3 K 4 -Speed: 160 rpm -Power: 0.25 kW -Design: B3 -Shaft: Ø 22 x 50 mm -Protection rating: IP 54 -Dimension: 450/158/H205 mm -Weight: 14.8 kg

Globoid gear, indexing, oscillator indexer, index gear -Manufacturer: Manifold, gearbox from rotary indexing table type RTU 800 8-150 -Translation: i = 1:8 45° -Dimensions: see photos -Quantity: 2x gears available -Price per piece -Dimensions: 470/375/H500 mm -Weight: 172 kg/pc.

CNC gear grinding machine/tooth flank grinding machine Höfler H4000 Built in 1990 CNC control is old + defective / needs to be replaced (needs retrofit) Wheel diameter - max. 4000 mm Wheel width 1560 mm Module - max. 32 Module - min. 3 Machine weight approx. 120 t Space requirements approx. m Year of Make: 1990 Wheel Ø max. 4,000 mm Module 3 - 32 Bevel angle max. 35 ° Wheel width with straight gearing 1,560 mm Stroke length approx. 1,600 mm Stroke rate 12 - 120 strokes/min. max. workpiece weight approx. 35,000 kg Max. number of teeth 12 - 768 Table size Ø x Bohrg. 1,900 x 750 mm Grinding wheel Ø approx. 500 mm Accessories / Special equipment: Hydrostatic guides in the grinding carriage, table and in all other Guideways Complete sanding chamber encapsulation with sliding doors automatic grinding sequence in several cycles as well as settings for ...

DC motor, servo motor, gear motor, electric motor, DC gear motor, DC shunt gear motor -Manufacturer: SEM, DC gear motor -Type: DPM30E4 -Voltage: 36 V -Speed: 70 rpm -technical data: see photo type plate -Shaft: Ø 30 x 50 mm -Dimensions: 430/150/H130mm -Weight: 14.3 kg

Gear motor, electric motor, electric gear motor, spur gear motor -Manufacturer: SEW-Eurodrive, helical gearmotor type R63DT80N4TH -Speed: 1400/21 rpm -Power: 0.75 kW -Shaft: Ø 30 x 60 mm -Protection class: IP54 -Dimensions: 495/550/H200 mm -Weight: 30 kg

Gear motor, electric motor, electric gear motor, twin-worm gear motor -Manufacturer: Parvalux, double worm gear motor type REF SD 38.SS -Speed: 1 rpm -Engine: 0.035 kW / 1400 rpm -Shaft: Ø 9 x 30 mm -Total dimensions: 220/135/H130 mm -Weight: 3.6 kg

DC motor, servo motor, gear motor, electric motor, DC gear motor, DC shunt gear motor -Manufacturer: Kählig, DC gear motor -Speed: 146 -Voltage: 160 V -Power: 300 W / 3000 rpm -technical data: see photo type plate -Shaft: Ø 16 x 27 mm -Dimensions: 320/120/H155mm -Weight: 10 kg

DC motor, servo motor, gear motor, electric motor, DC gear motor, DC shunt gear motor -Manufacturer: Dierking, DC gear motor type SO GP 86-2L -Voltage: 160 V -Power: 300 watts -Speed: 3000/146 rpm / i = 20.5 : 1 -Shaft: Ø 16 x 30 mm -Dimensions: 320/160/H150 mm -Weight: 10.1 kg

Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: Nord, gear motor -Gearbox: Type 73F VL-160 L/4 i= 37.63 -Speed: 39 rpm -Engine: Type SK 160L/4 -Power: 15 kW / 1460 rpm -Shaft: Ø 75 x 140 mm -Dimensions: 1060/400/H540 mm -Weight: 279 kg

Gear motor, electric motor, electric gear motor, worm gear motor -Manufacturer: Eberhard Bauer, gear motor -Type: D1A41AHZ/253 -Speed: 137 rpm -Power: 2.2 kW / 1420 rpm -Shaft: Ø 30 x 80 mm -Dimensions: 630/270/H220mm -Weight: 51 kg